MSI GE60 with i7-3630QM - Could someone please readout idle fan speed?
Hello,
as I am having trouble with my idle fan speed, could someone with an MSI GE60 and EC Version 4.04 readout the idle fanspeed using RWeverything, please? It will take under 5 minutes.
Steps:
0. Power on the notebook freshly, you should not have used the coolerboost button yet in that windows session.
1. Download RWeverything portable and extract it: http://rweverything.com/downloads/RwPortableV1.5.3.7.zip
2. Run RWeverything, it will prompt for administrative rights.
3. In the menu toolbar click on "Access" and then "Embedded Controller".
4. Make sure the laptop is in complete idle and that Core Temps are around 39 - 42 °Celsius.
5. Look at the Hex Table and search row "C0" and column "0D". There is a hex value surrounded by a lot of zeros. This is an inverted format of the fan rotational speed and it should be around Bx to Dx. Please take a note of the value an post it.
6. Now turn on coolerboost for about 30 seconds, then turn it of again. Wait for the value to increase to Bx till Cx again. Write down that value again and post both values.
To get rid of RWeverything just close it and delete the extracted files and the zip file.
Thanks a lot in advance for helping me troubleshooting my fan problem!
Quote from: Buluunee on 24-March-13, 00:06:01
i got gt70 however i think since the cpu is same the fan speed should be around same. for me idle - E3 turbo fan on - 72
That is very interesting, "E3"??? If you enable Turbo-Fan-Boost for 30 seconds, then disable it and wait for the fan to spin down completely, does it also revert to E3 or to a higher value?
The answer would most likely solve my problem.
Big thanks in advance,
jku
Similar Messages
-
Could someone please help me with getting the sabnzbd daemon to start?
Hi everyone,
I'm a classic newbie. I managed to follow some instructions I found on the web to get sabnzbd to install (via Yaourt), and when I invoke it from the command line, it works fine.
I've read that you can get it to start as a daemon, which would be really good. Could someone please explain how this should be done?
Where do I need to put the sabnzbd.init file?
What about the sabnzbd.confd file?
I'm okay enough with adding sabnzbd to the /etc/rc.conf file, but I can't quite configure it so that the necessary files are in place to start it.
If you need any details of my setup, please let me know.
Thanks heaps,
Lukebirdie101 wrote:Where would I find a good place to describe how to install programs using PKGBUILDs? and what that process is actually doing?
Apart from the wiki article on ABS, always look at the pkgbuild when in doubt. This is also helpful when you want to know what compile arguments are passed to GCC. Custom postinstall commands are run through .install file (example what is displayed after installation), this is generally foo.install in the AUR for a pkg named foo. And most importantly, familiarize yourself with compiling process, and Arch specific routines like a daemon should be defined in /etc/rc.d/, instead of /etc/init.d/ in other linuxes.
Edit: A best exercise would be to create a pkgbuild yourself. Arch always recommends community contributions.
Last edited by shemz (2010-09-24 08:08:14) -
Hi there, could someone please help me, i didnt have my icloud on before my iphone 4s broke. I have always used iTunes and everything was backed up on there and now im finding it hard to restore my phone with contacts, photos etc.
Dear Tylerkeefe,
Good morning. Getting notifications that you are close to exceeding your allowance can certainly be alarming. It would be my pleasure to help put your mind at ease.
I understand you are not streaming movies, music, etc. Which these features will use a lot of data. Are you using the Mobile Hotspot on your phone. This may also cause you to exceed your data allowance quickly if you do not power if off after you are done using the feature. To turn off mobile hostpot tap settings>general>personal hotspot>off. Do you have any third party applications that you have installed that may be running a lot of data?
To ensure applications are not consistently running in the background do the following press the menu button at the bottom of your phone twice. All the open apps will then appear. Select and hold the bottom of the screen. A minus sign will then appear in the top left of each app. Select each minus sign to close out the application.
I hope the information given will help clarify what is using a lot of data on your phone. Should you have further questions or concerns, please feel free to reach out to us.
Thank You,
MichelleS_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT -
Could someone please tell me how to convert a powerpoint to a movie, with a voice over? thankyou :)
could someone please tell me how to convert a powerpoint to a movie, with a voice over? thankyou
Open the powerpoint presentation, on the click on the 'file' button located at the top left of the menu bar, click on 'save as' at the bottom of the window that opens you should see a dropdown format gliff that says powerpoin presentation .pptx; click on the gliff and choose 'movie.mov'
-
Could someone please help me with contact form php.
Hi,
could someone please help me wright the php for this contact form?
<form class="contact_form" action="kontakt.php" method="post">
<p><input type="text" required="required" id="contact_name" name="contact_name" class="text_input" value="" size="22" />
<label for="contact_name">Namn *</label></p>
<p><input type="text" required="required" id="contact_company" name="contact_company" class="text_input" value="" size="22" />
<label for="contact_company">Företag *</label></p>
<p><input type="email" required="required" id="contact_email" name="contact_email" class="text_input" value="" size="22" />
<label for="contact_email">Epost *</label></p>
<p><textarea required="required" name="contact_content" class="textarea" cols="30" rows="5"></textarea></p>
<p><button type="submit" class="button white"><span>Skicka</span></button></p>
<input type="hidden" value="[email protected]" name="contact_to"/>
</form>
Its no sence writing down my php as it is useless.
All help is appriciated.
Thank youPlease don't post duplicate threads. Continue the discussion in http://forums.adobe.com/thread/1080721.
This thread is now locked. -
Could someone please sketch out this simple script for me?
Could someone please sketch out a simple java script for me. I will have a document with one background
layer and a layer set (group) called "Analyze" that consists of 63 adjustment layers. The layer names in that "Analyze" group(folder) will be
"01" ...through "63" with 01 on the bottom and 63 at the top. Initially, all of the adjustment layers will be invisible and the
group will be closed (not expanded). I need a simple script that will check for the first invisible layer in that group
and make it visible without selecting that layer nor expanding the group. The script has to check
for the first invisible layer every time it runs because other actions may have turned off a layer in the set.
The point of this is so I can hotkey flipping on the layers one at a time without expanding the set or
changing focus off the background. It seems it should be a simple loop, but I just can't wrap my head
around all the objects (e.g. Layer as opposed to Layers and Artlayer as opposed to Artlayers)
and the constants constants.
for (i = 63; i>0; i--){ /* I have found layer indexes 0 are the topmost layer */
if( layerset[i] == INVISIBLE){
layerset[i] = VISIBLE;
break;
Could someone please write me a simple script that would do this?
Edit I found this and its very close to what I need:
var doc = app.activeDocument;
for(var i = 0 ; i < doc.layers.length;i++){
doc.layers[i].visible = (i % 2 == 0);
From here : Function to show/hide layer with Photoshop script (JSX) - Stack Overflow
In my case I would rewrite it to this
for(var i = 62; i >=0; i--){
if( !doc.layers[i].visible){
doc.layers[i].visible =TRUE;
break;
My problem is I just need to traverse the layers in my layerset "Analyze"
How do I reference just those? Is there a doc.layersets["Analyze"].layers[i].visible = TRUE?
Message was edited by: Shawn Laughlin To add more informationWell this works:
var doc = app.activeDocument;
var analyze = doc.layerSets.getByName("Analyze").layers
for(var i = 62 ; i >= 0; i --){
if (!analyze[i].visible){
analyze[i].visible =1;
break;
Hard to believe TRUE is not a constant in java. -
i recently had my computer fixed as it was loaded with viruses. Also I finally got my IPad 1 back from someone who had "borrowed" it for a year. It no longer worked, but in the case i had written down my old apple id. i had purchased 3 other ipad's since then and changed my id. i typed the old id and was delighted to see that i had over $1000 worth of dowmloaded media. i want to use this old acct number on one of my other IPads to avoid confusing two accts, but when i attempted transferring media onto computer it said i needed to first download bonjour. i have been trying to figure out how, but computer genius i am NOT. could someone please help me? i really appreciate any advice you could offer steering me in the right direction with this. thank you, stacey v
Hey staceylynn261!
Bonjour is a program that is installed on your computer along with iTunes, so you will want to first uninstall iTunes and all of its related components:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
You will then want to visit this link to download and install the latest version of iTunes:
Apple - iTunes - Download iTunes Now
http://www.apple.com/itunes/download/
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
Could someone please help me . . .
Hello,
Could someone please tell me how to go about writing a java program that would be able to process a statement/sentence. How can I make it is so that when someone types in a statement/sentence and presses enter, the program calculates the total number of words in the statement and whether it ends with a period, question mark, or an exclamation. Could anyone start it off for me so I'd be able to see how it works. My textbook doesn't contain any samples that pertain to this. Just in case you have no idea what I'm talking about, here's what my handout says . . .
Write a Java program to process a statement. You may assume that the statement contains a series of words each separated by exactly one blank space and ending with exactly one punctuation symbol which is either a �period � for a sentence�, �question mark � for a question� or �exclamation point � for an exclamation.� You may assume that the statement fits on one line, it does not wrap over more than one line. You may also assume that no other punctuation symbol is used other than the ending character of the statement.
The program should output:
1. The type of statement processed (sentence, question or exclamation).
2. The total number of words in the statement.
3. The longest word in the statement � if multiple words are of the same longest length � output
the first of those words found in the statement.
4. The shortest word in the statement � if multiple words are of the same shortest length � output
the first of those words found in the statement.
5. The number of short words found in the statement (containing 1-3 characters).
6. The number of medium words found in the statement (containing 4-6 characters).
7. The number of long words found in the statement (containing 7 or more characters).
Again, if someone would be kind enough to start it off for me or give me an example on how to go about doing it, I would greatly appreciate it !!!!!
Thanks for your time,
Ana : )public class Austin
public static void main(String [] args)
try {
BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
String str = "";
while (str != null) {
System.out.print("> ");
str = in.readLine();
StringTokenizer st = new StringTokenizer(str, " ");
/* analyze your tokens here */
} catch (IOException e) {
} -
Quicktime movie trailers still not playing, could someone please help me?
I have not been able to watch any movie trailers from quicktime for two years now and this is really getting old.
my inf!
computer: DELL
system: Windows XP SP2
QT player version: 7.2
I have all system requirments and updates also allready unselected derctX and selected safe mode, still all I get when loading the movie trailer from QT websight is the white box with QT logo in middle, sometime the logo will also have ?mark over it. I figured it was just taking its own sweet time loading so I wated it out. 4 hours later there was still no change. you'd think apple would have fixed or resolved this problem since it has been ongoing for last two or more years.
Could someone please help me?????????
Message was edited by: scarpredelderTry https://discussions.apple.com/thread/4890398?start=0&tstart=0
See if that helps
Allan -
HT2305 Could someone please give me instructions on how to update my ipad 1 to iOS 5.1?
Could someone please give me instructions on how to update my ipad 1 to iOS 5 or above?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
I know that's so 90s, but all the images for iMac 27 Mid 2013 are broken. Could someone please look into that?
Thanks.I can see that too. I am referring to <http://support.apple.com/kb/HT1423?viewlocale=en_US#1>. This is the first link for iMac 27".
Your screenshot refers to <http://support.apple.com/kb/HT1423?viewlocale=en_US#4>.
This is what I see. I am still confident that this is a problem with the image link: -
In the latest iTunes, I cant find the "advanced" option to "make in iPad compatible version" that I used to be able to. Could someone please tell me if it's still there or if it's gone? (Or am I having a blonde moment?)
turn on the top menu Ctrl B amd it will reveal.
Select item you want to create a new version with
File > Create New Version > Create ipad or Apple tv version -
hi, i was wounding if anyone would help me get information on the company regarding the acquisition of, beats by dre, could someone please help me out as i am doing a college report on this and need some good sources of information
Try a search with Google.
Why should we do your homework for you? -
Some users are experiencing difficulty opening certain docx files sent as email attachments. These files contain content controls to protect data in the document. Could someone please confirm that the content controls are the reason the files won't open.
These files open correctly when sent as doc files.
ThanksCongrats to Saeid, Ronen, and Ricardo! Big thank you to all our contributors!
Transact-SQL Technical Guru - February 2015
Saeid Hasani
T-SQL: How the Order of Elements in the ORDER BY Clause Implemented in the Output Result
Durval Ramos: "Very well structured and with examples that clarify how a T-SQL statement can change the data output order."
Richard Mueller: "Good use of Wiki guidelines and great examples."
Ronen Ariely
Free E-Books about SQL and Transact-SQL languages
Richard Mueller: "An excellent collection and a great idea."
Durval Ramos: "A good initiative. Very useful !!!"
Ricardo Lacerda
Declare Cursor (Transact-SQL) versus Window with Over - Running Totals
- Accumulated Earnings
Durval Ramos: "The "Window function" sample was well presented, but it was unclear how the chart was generated."
Richard Mueller: "A new idea that can be very useful. Grammar needs work"
Also worth a mention were the other entries this month:
[T-SQL] Retrieve Table List with Number of Rows by
Emiliano Musso
Richard Mueller: "Short but sweet solution to basic question."
Durval Ramos: "A simple T-SQL script, but useful."
[T-SQL] Search for Missing Values within a Numerical Sequence by
Emiliano Musso
Richard Mueller: "Clever solution with good code examples."
Durval Ramos: "You need add more details about development of the idea and create a "Conclusion" section to easy understanding."
[T-SQL] Converting Multiple Rows into HTML Format single ROW by
Maheen Khizar (Bint-e-Adam)
Durval Ramos: "In some situations, It's need to consume and format HTML tags for a UI, but It's important to remember that Best Practices recommend this formatting process preferably in Presentation Layer"
Richard Mueller: "A great new idea. Some features need more explanation. Avoid first person."
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
HT2493 Could someone please explain colour tags?
I do not understand the use of colour tags on my Macbook air. Could someone please explain?
The colours are incidental. They are NOT labels any more. You will be frustrated if you try to use Tags to visually find your files.
The advantages of tags are this: you can add as many tags to a file as you like. They provide additional metadata so that you can query your file system. In a typical hierarchical file sytem (folders, subfolder), a file can only be in one place (unless you use aliases).
If I have "Cheeses > France > Soft" as my folders, I can put all the French soft cheese into one folder. But all the English soft cheese are in England > Soft. So what if I want to list ALL the soft cheeses, not just the ones from France? By tagging all the files with "Soft", I can then click on the Tag Smart Folder and list the soft cheeses in both countries' folders all at once.
If used creatively, you could have ALL the files in your Documents folder in one big heap, and then only view subsets of them according to their Tags. Tags represents a complete alternative to using folders to sort your files.
In a sense, a subfolder is simply a Tag in a tree-like structure.
So, instead of trying to visually find some files in a list using coloured labels, you can now query the file system by creating Smart Folders that give you a list of files that match your query: files with Tag X, in folder Y, of type PDF, bigger than 2 MB, containing the word "trumpet".
Visually scouring a folder for files is not as efficient as directly querying the system, even if it is engrained and familiar.
Maybe you are looking for
-
Pages iPad not syncing with iCloud Drive
On my iPad Air 2 pages won't sync to ICloud Drive after connecting to the school network it just doesnt attempt to upload and if it does it does nothing and the progres bar doesnt move at all this happens on the school net and my home wifi. my iPhone
-
I have downloaded a CD onto my computer and there are some songs that say my computer isnt authorized to play the songs. I have authorized my computer and deauthorized it then reauthorized it. It is still saying my computer is not authorized. Help pl
-
Making a field as not selectable(Readable) in dropdown box in HTML
Hi All, I have one requirement like make a field as no selectable(readable) in dropdown box(combo) in HTML, Could you please any one of you help me out in this regard. If Drop down box contains values like blue,red,white.. I want to make blue as not
-
Trying to switch from JDBC URL - JDBC DataSource
I have built and run a JHeadstart 10.1.2 application using JDBC URL defined database connections. I am now trying to switch to use JDBC DataSource definitions to make the database connection independant from the application so that the same ear file
-
How do I transfer entire contents of my ipod nano (purchased and downloaded) to my ipad?