MSI GE600 SSD Install

Hello there, I'm gonna buy a SSD for my ge600 but i need to know what kind of ssd is compatible with my laptop, i guess sata 3 ssd 2.5" is enough
how to i check my compatibility?

There's a user here that received a response from MSI support stating only Intel SSDs were recommended for the laptops he was inquiring about. I don't believe the GE600 was one he asked about, but, I will say there are several people on these forums that have better luck using Intel SSDs than other brands.
FYI, responses given here are not official MSI support. We are all users, including the admins and mods, none get paid. There are a couple of MSI techs that do post, but they post rarely to the point we can pretty much say that 99.99999% of the responses you will receive are from users.

Similar Messages

MSI GE600 Drivers of ATI 5730

Hi all and sorry for my english.
I have a MSI GE600-023
My question is simply :
can i install the generic driver of ATI => http://game.amd.com/us-en/drivers_catalyst.aspx for my GE600
or
I must use obligatory the MSI driver => http://eu.msi.com/index.php?func=nbdriver&maincat_no=135&prod_no=2017
Thx for your answer.

I recently found that the ge600 can be successfully updated to catalyst 12.6 (june 2012) with a method very similar to pmignault's solution. The only difference is an extra step to install 11.8 drivers in between. Going from msi drivers to 12.6 directly will not work.
Here's how I got it to work on a fresh win7 x64 install:
1. Install 5730 drivers from msi (6/28/10 release)
2. Reboot and go into bios. Set graphics options to "PEG"
3. Go into windows 7 and install catalyst 11.8 whql (i'm not allowed to post links, but search "amd catalyst 11.8 whql guru3d forums" in google. should be the first result)
4. Reboot and go into windows 7 again. Now install 12.6 whql (got it from guru3d forums as well)
5. Reboot and go into bios. Set graphics back to "SG"
6. Enjoy
Notes:
-Do not uninstall any drivers in between steps. Install everything over what is already there (this is usually not advised, but it's the only way you can preserve graphics switching for ge600)
-For all the installations, I chose the express option which installs everything in the package. I tried just installing the graphics driver and CCC, but it didn't work out for me
-I couldn't get this to work with the newest 12.8 drivers, but I was satisfied with 12.6 since i was previously stuck with 11.8's. I'll keep trying as new driver releases come out.

Re: MSI GE600 Drivers?

Hi
first sorry for my english :D
i`m going to buy soon a MSI GE600 and i have some questions about the drivers
the last drivers released by MSI (2010/06/28) (http://eu.msi.com/index.php?func=nbdriver&maincat_no=135&prod_no=2017) has included for the HD5730 the last drivers released by ATI (2010/06/16) (http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx) ?
to update to the last MSI drivers, must i only execute de setup.exe and install? or must i first uninstall the old drivers and then install the new drivers?
thanks

1 - Please do not hijack other peoples topics, topic split.
2 - Do not bump topic, it's not allowed. Bump removed.
>> Please read and comply with the Forum Rules <<

MSI GE600 - Simple Communication Controller Drivers

Hi,
I recently purchased two MSI GE600 notebooks. The notebook came with Windows 7 Home Premium, which I replace with Windows 7 Ultimate. My problem is that I'm missing a driver for "Simple Communication Controller"
I have installed all the drivers provided by MSI on their website, but still can't figure out what I'm missing.
Thanks in advance,
PC

Quote
YOU GOT IT!!!
I know.
Quote
What was that driver for anyways? Have I missed it on the driver page?
Intel Management Engine Interface Driver
It is at the very bottom:
http://eu.msi.com/index.php?func=nbdriver&maincat_no=135&prod_no=2017

SCCM 2012 R2 Install - SMS_NOTIFICATION_SERVER install fail - bgbisapi.msi could not install

Installed SCCM 2012 R2 Primary Site on the D: drive on a Windows 2012 R2 server. The install went as expected but when I open the Component Status, there are a number of Error messages which pertain to the failed installation of the SMS_NOTIFICATION_SERVER:
"Site Component Manager failed to install this component, because the Microsoft Installer File for this component (bgbisapi.msi) could not install."
Here is the error from BgbSetup.log:
<01/16/15 14:53:55> Installing the SMSBGB
<01/16/15 14:53:55> Passed OS version check.
<01/16/15 14:53:55> IIS Service is installed.
<01/16/15 14:53:55> SMSBGB already installed (Product Code: {A78E8003-2307-4B70-B7CD-1A07C0A31D21}). Upgrading/Reinstalling SMSBGB
<01/16/15 14:53:55> New SMSBGB is the same product code. This is a minor upgrade.
<01/16/15 14:53:55> Enabling MSI logging. bgbisapi.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\bgbisapiMSI.log
<01/16/15 14:53:55> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration
Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<01/16/15 14:54:04> bgbisapi.msi exited with return code: 0
<01/16/15 14:54:04> Installation was successful.
<01/16/15 14:54:04> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /u "D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<01/16/15 14:54:08> CTool::RegisterComPlusService: Failed to unregister D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<01/16/15 14:54:08> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /extlb /tlb:"D:\Program Files\SMS_CCM\microsoft.configurationmanager.bgbserverchannel.tlb" "D:\Program
Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<01/16/15 14:54:12> CTool::RegisterComPlusService: Failed to register D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<01/16/15 14:54:12> Cannot register BGB server channel DLL D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll. Installation cannot continue.
<01/16/15 14:54:12> Fatal MSI Error - bgbisapi.msi could not be installed.
<01/16/15 14:54:12> ~RoleSetup().
<01/16/15 14:54:21> ====================================================================
From what I've read online this problem seems to be born of installing SCCm on the D: drive which throws dotNET. A few people seem to have had some luck with editing two of the dotNET files (regsvcs.exe.config and InstallUtil.exe.config) to include
the following lines:
    <runtime>
        <loadfromRemoteSources enabled="true"/>
    </runtime>
In pursuit of a fix, I took backups of both files and then made the change to regsvc.exe.config but I was unable to do the same with Installutil.exe.config (opening the file in Admin Notepad would only let me Save As...).
Can anyone suggest what the problem could be? Am I barking up the wrong tree with the config file editing? Any info/advice would be much appreciated.
Thanks!

Hi,
You could try to copy Installutil.exe.config and edit the copy-file. Then copy the edited file to replace the old file.
Reference:ConfigMgr 2012 R2 – Notification Server Install Errors
Note: Microsoft provides third-party contact information
to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce

New ssd install in MBP 5,3 (mid 2009 model)

Hello,
New to ssd installing and terminology used in some of the discussion forums I have been reading!
About to install my new ssd and have a few questions before starting. (ssd is a crucial M500 480gb)
I'll try to be a blunt as I can because I tend to ramble on.......
1. Do I upgrade/downgrade efi? (Read in other discussions)
2. Do I enable/disable trim? (Read in other discussions)
3. I am currently running 10.6.8 and wanted to purchase the newest OS possible to install. I've read of a few issues of ML and the battery drain issues. Is it best to just stay with my 10.6.8 for now?
4. I also purchased an 8gb ram upgrade over the current 4gb ram to do at the same time. Don't I have to reset something once I power the MBP back up to recognize the ram?
5. I purchased an external case to put the (currently in the computer) hdd in once I take it out. I planned on installing the ssd, putting the current hdd in the case, and migrating only my contacts, iTunes library, iPhoto library, and my flip videos from it. I have the original install disc from my MBP-can't I just install it onto the ssd from the DVD drive? (I hear of people installing the OS from USB-is there any disadvantage/advantage to this over my install disc?). I'm just wondering if it will give me the option of installing from the DVD drive once the ssd is installed and blank. ??
6. Is there anything else I should consider migrating to my new ssd?
I think that's it. Thanks!!

This maybe too late, but here it goes:
1. Do I upgrade/downgrade efi?
- do not mess about with that. I have a mid 2009 MacBook Pro and am running 2x SSD drives inside without a problem. Only look in to EFI upgrading if the Negotiated Link Speed in System Information (Under Sata) is not reported as 3 Gigabit but rather as 1.5, once you install the SSD
2. Do I enable/disable trim? (Read in other discussions)
- some people report advantage from trim being enabled. I've personally noticed lockups during shutdown so keep it off. Typical SSD these days have grabage collection, but it is up to you in the end of the day.
3. I am currently running 10.6.8 and wanted to purchase the newest OS possible to install.
- don't purchase anything and download Mavericks for free, battery life will improve
4. I also purchased an 8gb ram upgrade over the current 4gb ram to do at the same time. Don't I have to reset something once I power the MBP back up to recognize the ram?
- the mac will recognise the ram anyway. You should however rest SMC see: http://support.apple.com/kb/HT3964
5. I purchased an external case to put the (currently in the computer) hdd in once I take it out. I planned on installing the ssd, putting the current hdd in the case, and migrating only my contacts, iTunes library, iPhoto library, and my flip videos from it. I have the original install disc from my MBP-can't I just install it onto the ssd from the DVD drive? (I hear of people installing the OS from USB-is there any disadvantage/advantage to this over my install disc?). I'm just wondering if it will give me the option of installing from the DVD drive once the ssd is installed and blank. ??
- yes by inserting the Disk in to the optical drive and holding 'C' during startup wil take you to the boot options, where you can format the SSD drive and install the OS
- advantage of OS on USB is faster install (quicker read speed) and for those people like me who substituted the optical drive for another HDD or SSD.
6. Is there anything else I should consider migrating to my new ssd?
- depending on your previous HDD size (and file sizes - looks like you have lots of photos and videos), make sure you watch what files you are bringing over as you can quickly run out of space on the SSD. You can use OmniDiskSweeper for example, to tell you wat files on your disk use the most space etc.
Hope this helps. And I am sure someone else will come up withh more suggestions

Mac Pro Missing Serial Number after SSD install

After installing a new SSD in an unused bay in my Mac Pro (OS 10.8.4) and setting it as my start-up disk with only System, Apps, Library and Users Folders on it, I have had a remarkable improvement in performance - things simply snap open now & I have not seen a spinning beachball/cogwheel until....
Messages will not work now - on opening, the program asks me to enter my Apple ID & Password but will not accept the entries (which I have double-checked & confirmed on my Mac Book Pro, iPad & iPhone) - I get a prolonged spinning cogwheel & then a message that it could not connect and I should check my Network Connections - I did & they are all working fine for other programs.
On line sources indicate that the iMessage Registration process involves the Mac's Serial number.
This no longer appears under the About This Mac Menu item when I click on the Version 10.8.4 line (the Build Number does appear).
This 4 year old Mac Pro has never had the Logic Board replaced.
And iMessages worked great prior to the SSD install.
Any ideas?
Thanks!
...John

you cloned the system? used Migration or Setup Assistant?
I doubt it has anything to do with the SSD.
But you might include what you did, what make of SSD even, and some brands (but not Samsung) would need firmware update.
You also need to use TRIM Enabler on any and all SSDs (unless you paid dearly and bought an Apple device).
Before you clone, install TRIM Enabler!
And after you clone, run Disk Utility's REPAIR DISK on the SSD -- just to be on the safest side.
http://www.macupdate.com/app/mac/37852/trim-enabler
SSD Maintenance
try creating a new user account. I doubt it is the SSD, or you, though it could be your OS install or just the common issues with iMessages. Is there not a forum for it? I'd think there would be.

SSD Install Experiences MacBook Pro 2011 i7

This is a report on the beastie that I installed in my MacBook Pro 2011:
http://thranblog.info/post/8615912997/ssd-install-experiences-macbook-pro-2011-i 7

The fan normally runs at about 2000rpms - if they're loud enough to actually hear, you might have a problem. Mine can rev up to about 4000rpms sometimes and I'll hear them then, but it's nothing consistent.
To see how fast your fans are running, download the free iStat Pro widget. If they're running abnormally fast, you could try a SMC reset to see if that will help.
I would also uninstall VirusBarrier - your really don't need av software on a Mac but if you feel as if you must have something, try the free ClamXav and/or Sophos for Mac (both recommended by our resident malware/virus guru, Thomas Reed).
Good luck,
Clinton

CrystalReports11_5_NET.msi will not install

I have the same problem as outlined below. CrystalReport11_5_NET.msi will not install. It gives the error message "This software package can only be installed on systems that has installed .Net 1.0 or 1.1. Needless to say, 1.1 is installed. Does any one have a simpler solution than below?
Thanks,
Robert T
http://forums.msdn.microsoft.com/es-ES/vscrystalreports/thread/598537d5-03dd-460c-9696-60717c2dc2f4/
We currently have a case where we are supporting multiple versions of our product on the same web server (a windows 2003 server). However, we have 2 versions of our application on the same server, but one is in ASP.nET 1.1 and the other is in ASP.nET 2.0. Our applications are fine and can co-exist ok on the server. They both use Crystal REports XI, Relesae 2, which supports both 1.1 and 2.0.
Our developer machines run just fine wtih both products and crystal reports, but the problem we are having is deployment. When we install the runtime redistrubutale for ASP.nET 2.0 on the machine a file(CrystalReports11_5_NET_2005.msi) then our ASP.NET 2.0 application works fine. However, when we install the crystal runtime redistributable fro ASP.nET 1.1 a file (CrystalReports11_5_NET.msi) windows 2003 server will not let us install it, it gives us an error saying that "This software package can only be installed on systems that has .NET 1.0 or 1.1". Which of course this server has, because our application in 1.1 runs jsut fine.
2 questions.
1. Can Crystal Reports XI Relesae 2 co-exist on a windows 2003 server for BOTH the asp.net 1.1 and asp.net 2.0 version?
2. Has anyone encountered this and resolved this?
Thanks
I believe the only way to get this to work is to uninstall the 2.0 framework, install the XIr2 for 1.1 framework msi file, install the 2.0 framework, then install XIr2 for the 2.0 framework.
Can't do the uninstall stuff because I got SQL Server 2005 and other .NET 2.0 apps running on the server. I got it to work by copying the .NET 1.1 versions of the Crystal DLL files (e.g. CrystalDecisions.CrystalReports.Engine.dll) from my PC to the server in the corresponding directory and then adding them to the assembly cache with the 1.1 Configuration tool. Don't forget the xxx.resources.dll files in the "en" directory also. In my case, I just needed to get the 1.1 stuff working. This is really bad and just adds another Crystal Reports horror story to my already very long list (I've been using Crystal for almost 15 years).

asnwer to 1 is yes, R2 supports both 1.1 and 2.0 framework. I'm not sure why you are receiving that error
answer to 2 is I haven't seen it but you may get more info if you can log a message with our deployment team.
regards,
Tim

MSI will not install; Bundle status is "Downloaded"

Have been receiving numerous "Error impersonating configured user." messages.
I changed the bundle to "Run as secure system user (don't allow system to interact with desktop)" and changed the "Install MSI" action's "Install Parameters:" to from /i to /im. ("Install MSI" is the only action.)
I then incremented the version number. "Install Options" are set to "Install always".
The bundle status in the ZENworks Adaptive Agent is shown as "Downloaded" and the .MSI does not run.
The clients PC's use Windows 7.

Murrutia,
> Before incrementing the version number, can you tell me what the
> expected result would be in the there are devices that already have had
> a successful installation of the bundle? Will the Zenwork agent "ignore"
> the install or will a re-install be attempted?
A reinstall will be attempted if the verstion number is changed:
(http://www.novell.com/documentation/...tware_distribu
tion/?page=/documentation/zenworks11/zen11_cm_software_distribution/data/b
z87zho.html)
"D.1 Triggers that Cause an Install Action Set to Run
If you assign a bundle to a device or user, the Install action set runs on
the device only in the following circumstances:
If the Install action set has never run on the device.
If the version of the Install action set is different from the version of
the Install action set that has previously run on the device
The Install action set of a bundle is internally associated with a global
version identifier and the Install action set of every bundle version is
internally associated with a local version identifier.
If you make any modifications to a bundle other than modifying its Install
action set, the Install action set of the sandbox that is created has the
same local version identifier as the bundle version you modified. However,
if you modify the Install action set of a bundle, the global version
identifier of the bundles Install action set is incremented by one and
the modified Install action sets local version identifier is set to the
new value of the global version identifier.
If the install action set or its options are modified and the bundle is
re-published, then when the bundle is installed or launched, the install
action set is invoked again, even if it has been set to install only
once."
Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Have an idea for a product enhancement? Please visit:
http://www.novell.com/rms

Extra ssd instalation

Maybe have someone some info about extra ssd instalation into 2011 model 27 iMac (http://www.everymac.com/systems/apple/imac/specs/imac-core-i7-3.4-27-inch-alumin um-mid-2011-thunderbolt-specs.html) by apple support service?
I live in the Nederlands and would like to ask support by apple to help improve my iMac (still with Apple Protection Plan).
Is it possible? and how much does it cost? and how much time it takes? and most importance - who I have to call for this service?
thx for any help

Apple does not upgrade hard drives after the computer has been purchased. You'll have to go to an Apple Certified 3rd party computer repair shop to determine the cost. If an un-certified shop opens up your iMac, your AppleCare will be voided.

MBP doesn't see newly installed SSD (installed into optical drive bay)

Hi all,
Re-posting, from an earlier post, with a more specific topic. I recently installed an OWC 2.5" SSD, via the OWC Data Doubler, replacing my old, non-working, optical drive. I installed it step-by-step, from their installation video. BTW - I also installed a RAM upgrade, and, that installation (although admittedly easier than the SSD install) is working fine. However, my MBP is not "seeing" any new drive. Does anyone know if there is a step that I am missing? Or have an idea what I may have done wrong?
I re-opened the machine and double checked that all 3 "connections":
From SSD to Data Doubler Frame;
From Data Double Frame to SATA tab; and
SATA connector to the motherboard;
WERE ALL SEATED PROPERLY. Yet, the MBP still does NOT see the newly installed drive.
Any help would be greatly appreciated.
Thanks.
MJ

Hi,
Have you tried booting up while holding down the Option key and the selecting the SSD? Or putting the SSD in the other bay?

MSI GE600 - Storage slots (HDD vs SSD)

Hi, sup?
I bought my GE600 3 months ago and want to add more power to it, now I'm thinking to add a SSD but I need at last 250GB of storage and those drives are too expensive.
So I thought on buying an 80~120GB SSD and keep my 320WD HDD. Can I add the SSD into my notebook? Does GE600 have an open slot for one more drive?
Can anyone help me with this?
Thanks

Its there, in the Assembly guides area.

Black screen when MSI driver is installed (MSI R9 270X 2GB )

Bought new computer and everything worked fine until couple of days ago ..
can pull some info ..
Windows 7 Ultimate x64
AMD 8350FX 8-core
ASUS Sabertooth 990FX R2
MSI R9 270X 2GB GDDR5
8GB 1866MHz RAM
120gb SSD Kingston HyperX
Everything worked fine even with the drivers that are there now but one day the screen started to fluttering and act strangely then windows crashes. I rebooted then when I want to log in or when the login page will show I only got black screen...
Reboot again ... go into " safe mode " ... screen works with standard VGA ... uninstall the drivers for the MSI card ( msi.com ) ... restart ... everything works .
However, it goes on the standard VGA but as soon as I install the drivers, I get the same problem ....
What has happened?
Got NO clue right now .. drivers worked before , I haven't updated them since I installed them (3weeks ago) I have not done anything that I can think of ..
Are grateful for answers!

I have the same problem. Updated driver to 13.11 beta was running my MSI 2GB r9 270x for 3 days got it on the 24th and today after a system reboot the windows screen appears to load then goes to black. I started safe mode, uninstalled the ati graphics drivers, rebooted and windows booted fine. Reinstalled the lastest 13.12 driver and rebooted to the black screen again.
Specs:
Board: P7P55D Asus
PSU: Cooler Master Silent Pro M850 @ 850 W output SINGLE 12V channel at 66A
VCard: R9 270x MSI 2G
Proccessor: intel i5 750 @ 2.66 GHZ
Did not overclock the video card or touch the voltages, tried VBIOS updates to fixed the screen flicker and it worked find the flicker dissapeared after the this new black screen problem happened i reverted back to the stock VBIOS the card shipped with(saved it before i updated it) reverting to the stock VBIOS didnt fix the problem only removing the driver fixes the problem, any help would be greatly appreciated.
Thanks for your time,
Empirus

SSD Install on GT70 20C-408US

I've looked everywhere and can't find info on what I can and can't do with HDD and SSD. The GT70 20C-408US comes with a 1TB 7200 rpm HDD. This is the limiting factor for games. I'm trying to determine if I can install an additional SSD to support games, or if I can only support one drive.
Thank you for any assistance!

Just bought my GT70 2Oc-408US the other day; called MSI technical support, asked them about replacing the HDD with a SSD and if it would void any warranty. The Agent for MSI assured me that the Warranty would stay intact, and then directed me to a MSI website which had instructional videos on replacing the HDD. Watched the video, replacement instructions were straight forward. I had pre-ghosted the SSD, so the replacement went very smooth.
Ran the Windows Experience Index [Windows 7 OS], came up as 7.7; I am happy!!!

MSI GE600 SSD Install

Similar Messages

Maybe you are looking for