MSI GE620 can't boot to windows after installing CoreCenter 2.0.6.8

I have made a very huge mistake by installing an overclocking software without knowing anything about overclocking :(
Here is what I have done
- I installed CoreCenter version 2.0.6.8, after the installation finished it ask me to reboot the system, so I reboot.
- First my system won't shutdown it tell be that S-Bar (an toolbar that come with my GE 620 laptop) prevent me from shutdown, so I hit force shutdown. Then the system started to shutdown but it stuck at windows logo (Shutting down screen) so I hold down the power button to force turn off
- Windows gives me an option to boot into safe mode (because I hold down the power button and it is unexpected shutdown), I hit start Windows normally
- It goes into a Windows logo screen like normal, but it won't boot. It's just stuck at the Windows logo screen. At this time I tell myself "OMG what I have done!???"
- I try most option in a boot option (not sure what it called, it's a menu brings up when you press F8). I tried boot into safe mode, safe mode with cmd (both stuck at loading disk.sys), repair system, enable low res (640x480), last known good config, Directory service restore mode and debugging mode. None of them are able to boot.
- I grab a Windows 7 Ultimate repair disc that I have created long time ago. And.... "Oh no! It even cannot boot into a repair disc!"
- I give a Hiren's BootCD 15.2 a try. I boot Mini XP from that disc and..... It can't even boot XP from the CD.
- Ok Ok, maybe it mess something with BIOS setting, I press DEL into a BIOS setting (I believed) and hit restore all setting to default. Unfortunately, my system still won't boot.
Any idea of how I can uninstall this CoreCenter or any clues that what it have done to my system?
The only thing I know for now is just re-installing Windows, but I need to backup some data in C:/ first. I think I can install windows without formatting and backup some data and re-install it with format.
My system information
MSI GE620 laptop (All of hardware is stock, I didn't change anything. Just install extra 4 GB of RAM)
CPU: Core i7 2630QM
GPU: nVidia GeForce GT 540M / 1 GB DDR3
RAM: 8 GB
OS: Windows 7 Ultimate x64
Update: I can't even boot from a Windows 7 installation disc!! *cry*

Having not yet installed Developer 6 on my own system, (still running most recent 200 version), I can't be exactly sure. However your problem sounds a lot like the problem I encountered in trying to get my Dev 2000 install to connect.
Here are some things to check:
Is your listener running?
Is your listener properly configured to look for your host machine?
Look in the Oracle Net 8 Assitant utility and see how many listeners have been established. This is where my problem existed. I had 2 listeners. One was trying to connect to my loop back address (127.0.0.1) and could not. The other was properly configured for my host address but would not run because of the failure of the other. Once I removed the listener the was using the loop back address things began to work.
Make sure you have the appropriate alias set up through SQL Net Easy Config and/or Net8 Config.
Thats all I can think of for now.
Hope something I said will help.

Similar Messages

Can't boot into Windows after installing with Boot Camp

So I installed Windows 7 on a separate 70GB partition using Boot Camp. Everything seems fine, but once installation finished and the computer restarted for the final time, the computer shows the blinking "_" on the black screen and then promptly reboots and this cycle continues without end.

please re-post in the more appropriate Boot Camp forum

Can't boot into Windows after splitting Mac partition with Disk Utility

Hi everyone,
I installed Windows 8 with BOOTCAMP, creating a large 871 GB partition with a smaller 127 GB partition for Windows. After installing Windows, I then went back to Disk Utility to shrink the Mac partition and add two new partitions, one for storage and another blank, hoping to use it to install Linux into one day.
I did that, and now Windows doesn't boot. A Windows blue screen tells me I need to use the Windows DVD to repair it.
I tried to use Disk Utility to delete the two new partitions I made and grow the Mac partition back to the max size of 871 GB. But it doesn't let me do this. The Disk Utility log doesn't report an error and thinks it worked but the partition stays the same size. However if I make the partition a little smaller, like 870 GB then it works. I'm wondering if the Recovery partition is hiding there and preventing me from fully expanding the Mac partition.
What can I do?
Here's what I get if I type in sudo gpt -r -vv show disk0:
Code:
gpt show: disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168 gpt show: disk0: Suspicious MBR at sector 0 gpt show: disk0: Pri GPT at sector 1 gpt show: disk0: Sec GPT at sector 1953525167 start        size index contents 0           1         MBR 1           1         Pri GPT header 2          32         Pri GPT table 34           6 40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B 409640 1701278816      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC 1701688456     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC 1702957992     1846360 1704804352   248002560      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 1952806912      718223 1953525135          32         Sec GPT table 1953525167           1         Sec GPT header
Here's what I get if I type sudo fdisk /dev/rdisk0:
Code:
Disk: /dev/rdisk0     geometry: 121601/255/63 [1953525168 sectors] Signature: 0xAA55 Starting       Ending #: id cyl hd sec - cyl hd sec [     start -       size] ------------------------------------------------------------------------ 1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID> 2: AF 1023 254 63 - 1023 254 63 [    409640 - 1701278816] HFS+ 3: AB 1023 254 63 - 1023 254 63 [1701688456 -    1269536] Darwin Boot *4: 07 1023 254 63 - 1023 254 63 [1704804352 - 248002560] HPFS/QNX/AUX
Here's what I get with gdisk:
Code:
Disk /dev/rdisk0: 1953525168 sectors, 931.5 GiB Logical sector size: 512 bytes Disk identifier (GUID): 6075110F-7CEF-4604-85EE-6231B850E2AE Partition table holds up to 128 entries First usable sector is 34, last usable sector is 1953525134 Partitions will be aligned on 8-sector boundaries Total free space is 2564589 sectors (1.2 GiB) Number Start (sector)    End (sector) Size       Code Name 1              40          409639   200.0 MiB   EF00 EFI System Partition 2          409640      1701688455   811.2 GiB   AF00 1 TB APPLE HDD HTS54101 3      1701688456      1702957991   619.9 MiB   AB00 Recovery HD 4      1704804352      1952806911   118.3 GiB   0700 BOOTCAMP

Okay, the code I typed didn't display properly in the forum. Let me try again.
Here's what I get when I type
sudo gpt -r -vv show disk0:
gpt show: disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 1953525167
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1701278816      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1701688456     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1702957992     1846360
1704804352   248002560      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1952806912      718223
1953525135          32         Sec GPT table
1953525167           1         Sec GPT header
And when I type fdisk /dev/rdisk0 I get:
Disk: /dev/rdisk0          geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 1701278816] HFS+
3: AB 1023 254 63 - 1023 254 63 [1701688456 -    1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [1704804352 - 248002560] HPFS/QNX/AUX
Kappy,
I can boot into OS X just fine so if possible, I'd like to avoid reformatting everything. If you know of a way I can add more than 2 partitions with OS X and Boot Camp, please let me know. As far as I know, rEFInd can recognize more than two partitions, but I don't think it can edit partitions on a GPT / hybrid MBR system. Or am I wrong?

I can't boot to Windows after resizing my Mac partition.

So, I recently decided to resize my bootcamp Win7 partition. This is something I have done successfully before, by:
1) Booting into Macintosh
2) Using Disk Utility to decrease the size of the Mac partition (20GB the first time)
3) Booting into Windows
4) Using Mini-Tool Partition Wizard (third-party) to allocate the free space to the Bootcamp partition.
There were a couple issues caused by this the first time around, mainly the fact that Macintosh didn’t recognize the fact that the free space had been taken, and had trouble reading from the Windows partition. However, I could live with that. I have since rebooted to both Mac and Windows several times without problem.
Recently, I decided I needed a bit more space, and so started to follow the above steps, shrinking the Mac partition an additional 15GB. Only when I went to reboot to reallocate the space, the Windows partition didn’t show up as a bootable option. Confused, I booted back to Mac, and the Bootcamp partition was still there, but renamed “disk0s4”, and unmounted. Reparing the disk failed (“Invalid BS_jmpBoot in boot block: 15921e”). The disk wouldn’t mount (not even sure if it was supposed to be mounted earlier, but that’s what it looks like). It also appears grayed-out in the list of drives to the left. It looks like I can create a dmg from the windows drive, although I haven’t done that yet (I will soon).
Any solutions for this? Although I will erase the drive if absolutely necessary, it would be preferred if that wasn’t the first option to try. I had no problems like this the first time I resized the disk.
(My mac partition is running Mavericks, if that is of any relevance)

These steps correct the Partition ID, and the boot ability of the MBR partition that has Windows on it.You can type '?' for help in the following steps where you set the fdisk prompt.
To fix the MBR, in OSX Terminal
sudo fdisk -e /dev/disk0
setpid 4
07
flag 4
p
w
y
q
Please ignore the i386 message that you see in the following. Here is the set of commands in the utility. The utility starts at partition id 1. If you see any other messages, please post back.
sudo fdisk -e /dev/disk0
fdisk: could not open MBR file /usr/standalone/i386/boot0: No such file or directory
Enter 'help' for information
fdisk: 1> ?
help Command help list
manual Show entire man page for fdisk
reinit Re-initialize loaded MBR (to defaults)
auto Auto-partition the disk with a partition style
setpid Set the identifier of a given table entry
disk Edit current drive stats
edit Edit given table entry
erase Erase current MBR
flag Flag given table entry as bootable
update Update machine code in loaded MBR
select Select extended partition table entry MBR
print Print loaded MBR partition table
write Write loaded MBR to disk
exit Exit edit of current MBR, without saving changes
quit Quit edit of current MBR, saving current changes
abort Abort program without saving current changes
fdisk: 1>

Can't boot from Windows XP Install DVD

A couple months ago I wanted to use Boot Camp for the first time to install Windows XP Professional (SP3) on my iMac8,1, but I ran into a lot of trouble. I got a lot of support from you guys but I ended up scratching the mission because of a problem that nobody could help me with at the time (I sought support on IRC, too). I will adduce the links to the threads regarding the issues that were more or less solved at the end of this post.
Today I decided to make a thread here and hope that this time somebody knows what to do, how to solve the weird problem that I'm having when I try to boot from the Windows XP Install DVD right after I partition the hard drive with Boot Camp Assistant.
So when the iMac restarts, after I have inserted the disc, and tries to boot from it, I randomly get one of the following three possibilities on the screen (and nothing happens after it):
http://img689.imageshack.us/img689/6725/p3201160.jpg
http://img180.imageshack.us/img180/105/p3201161.jpg
http://img684.imageshack.us/img684/2076/img0472zt.jpg
I burned the disc myself, so it's not the original disc from Microsoft. I did try re-burning the .iso file multiple times (both with Disk Utility and with the application called Burn), to no avail. The disc works fine with VirtualBox!
Please let me know if you have a possible solution and I will thank you for it greatly!
Related threads:
Weird Behavior After Multiple Failed Partitioning Attempts
I Can't Partition My Hard Drive (Files Can't Be Moved)
How should I go about this? (resetting my system with minimal losses?)

Only thing that comes to mind is did you try multiple types of burn media? Also, did you try burning at the slowest burn speed?
~Lyssa

Can't boot from windows 7 install usb drive created in bootcamp

So, my real problem is that my Windows 7 install won't boot after I installed some windows updates. I'm using OSX Lion and the latest version of Bootcamp. I've had Windows installed on my mid 2011 mac mini for only about a day. It had been working flawlessly so far.
Windows automatically downloaded and installed some updates and now it is broken.
When I attempt to boot windows I get a black screen that just hangs forever. No windows logo, no blinking cursor, no nothing.
I thought I could use my Windows 7 Install usb drive to maybe try and do a recovery or repair install but now my USB drive wont boot either. I get the same black screen.
Any ideas on why I can't boot even the install usb drive?
Note: this is the same USB drive I used to install windows the first time so it's definately capable. I've even used my install iso to re-create the usb drive installer and still nothing.

Install ISO means you burned DVD installer and did you reduce burn speed? otherwise it is a bad install.
3rd party updates? for security suite? stick to MS Security Essentials instead.

Can't boot macbook pro after installing yosemite

I installed Yosemite last night. Installation went smoothly, but when the mac reset and try to boot the loading bar on the black screen with the apple symbol, didn't move for hours.
I have been keeping up to date with the other post on here and have tried
- Reseting the PRAM
- Booting in recovery mode and turning off the wifi
- Reinstalling Yosemite from recovery mode
- Booting in safe mode and removing all of my login items
Currently every time I reset, the loading bar on the black apple logo screen stops in one of three spaces.
Does anyone have any other ideas? I have my files backed up so if it comes to it I can reset the mac, but I hope it won't come to that.

You might try to reboot and hold the option key down to see if the screen illuminates. If it does then you can choose from an external disk or your main drive.
OR
About Lion Recovery
Recovery System
OS X Lion or OS X Mountain Lion includes a built in set of utilities in the Recovery System. Restart your Mac and hold down the Command key and the R key (Command-R), and keep holding them until the Apple icon appears, indicating that your Mac is starting up. After the Recovery System is finished starting up, you should see a desktop with a OS X menu bar and a "Mac OS X Utilities" application window. Note: If you see a login window or your own desktop and icons, it is possible that you didn't hold Command-R early enough. Restart and try again.
In order to reinstall OS X Lion or OS X Mountain Lion, you will need to be connected to an Ethernet or Wi-Fi network. The Wi-Fi menu item is in the upper-right corner of the screen. Click the icon to display all available Wi-Fi networks. Click your preferred network name and, if needed, enter a username and/or password.

Slow Boot of Windows after installing Anyconnect Client

We have just migrated our Windows 7 x64 SP1 machines from the Cisco IPSec client to Cisco Anyconnect 3.1.02x.
Users have immediately noticed the negative effect that the AnyConnect client upgrade has had on their machines - Adding an additional ~20 seconds to PC boot time. (NB: Boot time classified as the time it takes from power on, to the 'Ctrl+Alt+Del' logon screen).
Has anyone else encountered issues like this post migration? Anybody know of any timeout settings, or other settings that I could adjust within the AC client to reduce the impact on boot time?
Thanks,
- Scott.

I haven't tested with Anyconnect 3.0. Is there a particular reason that I should?
Good point re: the modules. The modules that I have installed (beliving that this would represent a fairly standard install) are:
Base Windows Client
Network Access Manager (Used to connect to our corporate WiFi)
Start Before Logon
DART (Not sure if I need this component?)
--Perhaps I could look at ditching SBL and DART if these are not typically installed?
I have been scanning the Windows System, Application eventlogs, as well as the Cisco Anyconnect eventlogs. I have tried to locate any mentions of a timeout, but have had no success as yet.
Setting the Cisco AnyConnect Network Access Manager, Network Access Manager Logon Module and Secure Mobility Client services to disabled has the machine booting some 20 seconds faster (of course Anyconnect client is then disabled)
I was expecting a small impact to boot time, but had not prepared our users for a 20 second increase!
- S.

Can't boot into Windows 8.1 partition after apple store repair

Can't boot into Windows 8.1 partition after apple store repair
I went to the apple store about a week ago to get my screen fixed, and when I get it back I don't have an option to boot into my windows partition. The bootcamp partition is still there, but I can't boot into it. I can still see all of the files on the drive. When I try to boot into windows from the startup disc setting I get "no bootable device — insert boot disk and press any key” on a black screen. I went in for a dead pixel, and the guy at the genius bar ran something on my computer and went into disk utility application. I’m not sure what he was doing, but obviously that’s what messed up my windows partition. How can I be able to boot back into windows? Here's what disk utility looks like on my computer.

Here's the output
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 b0 0e 2b |........?......+|
00000020 00 00 00 00 80 00 80 00 ff bf 2e 0f 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 05 92 d3 74 c4 d3 74 aa |...........t..t.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
Here's a better screenshot.

Can't boot to windows, stuck at black screen (with cursor)

Hi! I'll get straight to my problem: I can't boot to Windows (Windows 10 Technical Preview) anymore after installing VirtualBox (or rather, an Android emulator that installed VirtualBox) on my system. I get stuck, after the loading animation with the blue HP logo, on a black screen (I can move my cursor around) but the login screen never shows up.
The problem.
I'm currently dual-booting linux and windows for several purposes. My laptop came with a Windows 8.1 OS by default. Some time after the Windows 10 Tech Preview came out to public, I upgraded my system to Windows 10 (so my 8.1 is gone now). Everything's going well until I installed this Android emulator (which installed VirtualBox) on Windows 10. Everything seemed fine at first but after rebooting, Windows isn't working anymore. I can still boot to linux, but Windows just won't boot properly.
What I've tried.
I've tried A LOT of things. The problem actually happened twice already (at first I was able to fix it with System Restore but not this time around). I have a Windows 8 USB Recovery Drive at hand, just so I can access a Windows command line. It's not from my system, though. It came with a new windows 8 laptop of a friend so I just borrowed it.
1: System Restore. This worked the first time. But now the restore won't finish and throws an error, telling me that it can't restore my system.
2: Refresh PC. "There was a problem refreshing your PC. No changes were made." or something like that.
3: chkdsk on C:\. It says it changed some files, but it doesn't really fix the problem.
4: sfc /scannow. Again, something happened, but it didn't get fixed.
5: bootrec.exe to fix BCD and MBR. Doesn't work. (as far as I know my sytem is using GPT)
6: Hard reset (remove all power sources then hold power button). Still not working.
7: System Restore again. All the restore points aren't working. It reaches a "Finished" state, but then an error comes up after. It says can't extract a specific file, and the restore point is damaged or might have been deleted during restore.
8: checking and fixing bad sectors (nope, no bad sectors on my hard drive)
9: built-in component tests. It passed all of them, except the battery test (my battery really isn't surviving for any duration longer than 30 minutes, but that shouldn't affect my OS). I didn't try the really long tests since I thought it wouldn't matter as my problem is most probably completely software (since linux is still working).
10: cry. oh please. Windows isn't working. What should I do? (
Things I haven't tried.
1: RAM and CMOS battery reset.
2: Reset PC.
3: Format hard drive.
4: Test hard drive on another laptop's system.
If possible I'd like to avoid getting my hard drive wiped, since I have a lot of stuff to backup (more than 300 GB of files + dozens of linux apps and ppas), and I only have a 32GB USB drive to backup all the files I need).
Thanks for reading.

Sorry for the delay. Wasn't expecting the "road work" signs when attempting to check back with you in the AM here.
As others have already mentioned, the prompt for file systems occurs during text mode setup. Quick or Full? FAT or NTFS? How do you know what to do?
We'll start with file systems, short and sweet. Most any OS can read and write FAT volumes without fail which makes FAT ultra-portable, and the only choice if you want to let Mac OS write documents on your Windows volume. It's also more efficient on drives of 16 GB or less. However, FAT has no folder-level access control, so any file in the system can be manipulated by any user or by any system process. By contrast, NTFS is far more restrictive. It can only be manipulated under Windows, though other systems may be able to read it. Not only do you get the access control that FAT lacks, but you also get superior efficiency on large volumes, plus the power to compress or encrypt folders and files at will (in "business" flavors of Windows only--and yes, Vista Ultimate counts as "business" even though it will be supported much like a "consumer" version).
On format speeds: A quick format is very handy if you have a large partition or a single drive completely dedicated to Windows. Because it completes in 30 seconds or less, it will go a long way toward completing your Windows install. However, in some cases, volumes formatted with a quick format may have reliability issues. They must have fixed this in Vista, because Vista can only format at the "quick" speed.
A full format tests all blocks of a given volume (as opposed to testing an entire disk unless the volume itself is the entire disk) as the file system structure is laid down. Bad blocks are marked as "used" when they are found. This type of format takes much longer as a result of all the testing, but the result is a more stable volume from the start.
Get past the formatting stage, and you'll be right as rain.
Nate

Hi, can anyone help with the problem I am having with pro book 4440s? I can't boot into windows 7.

Hi, can anyone help with the problem I am having with pro book 4440s? I can't boot into windows 7, nor can I enter the bios cause i fogot the password. the error I am getting says "windows failed to start. a recenr hardware or software change might be the cause. it then gives me options to boot from a disc but I can't do that cause I am unable to get into the bios to change it to boot from a disc.
The error message goes on :
File: \Boot\BCD
Status: oxcoooooof
info: An error occurred while attempting to read the boot configuration.
the only two options on the screen are enter=continue and ECS=exit
I just can't get pass this screen.
Please help.
Thanks

Hi,
If you don't already have one, use another PC to create a Windows 7 Rescue CD. Download the relevant ISO from the links below.
Windows 7 32bit
Windows 7 64bit
You should use an application such as ImgBurn to burn the ISO to a CD - a guide on using ImgBurn to write an ISO to a disc is Here. Once created, or if you already have this, tap away at the esc key as you start the notebook to enter the Start-up Menu. Insert the Rescue CD. Select Boot options ( usually f9 ), use the arrow keys to select the CD/DVD drive and hit enter. You may also get a prompt to 'Press any key to continue' - do this if asked.
When loaded, select Repair Your Computer and choose the Command Prompt. When this loads, enter the following commands and hit enter after each one - include spaces as shown.
Bootrec.exe
bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd
bootrec /fixmbr
bootrec /fixboot
Remove the Rescue CD and try rebooting the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Changed my iMac but Can't Boot from Windows

I'm using iMac 21.5 with Mac OS X 10.6.6
All programs are updated.
I used to have iMac 24, but i removed it's hard drive and installed it on a new iMac 21.5
i can't boot from windows 7.
what should i do ?

Can you boot into safe mode ..... because if you can you can also reach "repair computer"! so reboot your windows partition, as soon as the bios appears start pressing F8 until you see "Advanced Boot Options" when you get there choose, "Repair your Computer" (1st selection on the page) and go to "Startup Repair" .. selecting that will cause Windows to attempt to repair the boot sector of it's partition, if it succeeds you'll be able to boot, if not no data will have been lost.
However please understand that without a backup of your windows partition data loss is a possibility under these circumstances. Windows hard drives almost never boot when moved from one installation to another. Read that last bit twice.
Good luck
Message was edited by: Csound1

Can't boot into windows 7 anymore......

Hi all, I have a Mac mini late 2012 with windows7 installed through bootcamp5. It has worked flawless until recently, now I can't boot into windows anymore. I've checked in finder and the bootcamp partition is present and also all the files. Before that, I did have some trouble with my LaCie 2big thunderbolt hdd, it kept on saying I had to reformat one of the discs in the drive, but only when used in windows, in OSX there was/are no problems reading the hdd .......
Any idea of how I can make windows bootable again?, do I really have to make a fresh install of windows to make it work??
Any help is very much appreciated
Kindly
Jan

You might want to visit the Boot Camp forum where the Boot Camp gurus hang out. https://discussions.apple.com/community/windows_software/boot_camp

Can't boot os x after bootcamp

Hello.
The problem:
Yesterday I installed windows 7 on my early 2009 (mavericks) mac pro via boot camp.
I have three HD in my mac. One for os x, one for documents, and one for the windows. Before I start bootcamp I formatted my HD into NTFS for Win.
I run the bootcamp and everything went well, until the standard windows partition screen show up. I select the "bootcamp" HD, but i only can continue the installing if I format the hard drive.
The Win7 run well, but now I can't boot into os x.
When I hold down "options", only the windows appear as a selectable option.
I installed bootcamp on windows manually (4.0.4033 according to Boot Camp: System requirements for Microsoft Windows operating systems)
when I try to restart to osx the bootcamp say "there is no bootable volume".
i only see the "bootcamp" HD, and I can't treat the other two.
What I tried
Resetting NVRAM and PRAM
Holding down various key combinations (Options, Command + R, Options + R)
When I take out the "Machintos hd" a flashing folder pic appears.
I don't have the installation disk for os x, and I don't want to uninstall the os x..
There is any solution for my problem?

1. How many physical drives do you have in the MacPro?
2. Was Windows and OS X installed on the same physical drive?
3. In the case of the Tower MacPro with more than one drive, all drives that are not intended for Windows use must be physically removed from drive bays, before Windows is installed.
4. If you cannot see OS X, use an external disk (Firewire or USB with 16GB or more) and install a fresh copy of OS X and both you MacPro and the the disk with Windows can be corrected, if possible.
5. OSX re-installation leaves you files intact, unless you tell the OS X Installer to erase the designated drive.
6. Step 4 can also uses a USB flash drive, if necessary.
The error message is because a drive which was present when Windows was installed (it is stored in the BCD for W7/W8 or boot manager/loader)is no longer available. It is complaining about it.
If you put this drive back, can you boot into Windows successfully? If yes, can you post a screen shot of Control Panel -> System -> Administrative Tools -> Computer Management -> Disk Management.

Windows die out because of battery, can't boot to windows again

Windows die out because of battery, can't boot to windows again

Windows die out because of battery, can't boot to windows again

MSI GE620 can't boot to windows after installing CoreCenter 2.0.6.8

Similar Messages

Maybe you are looking for