MSI GE70 Doesn't Boost, Stuck at 745 Mhz (650m gpu)

hello, i bought my laptop yesterday and i figured out a strange thing. my gpu won't go above 745 Mhz even if i play games(dota2, bf3). as far as i know it should boost to 830Mhz. i google'd it and found out that some dell owners had that aswell and a bios update for dell solved that. is there any msi bios updates on the way? or is there any other solutions for my problem?
here is a quick summary of what i did so far: after i found out that i have a problem, i ran some oc softwares to boost it manually;
-msi afterburner: didnt work at all, gpu clock stuck 745 mhz,
-nvidia inspector: very weird but i tried almost 20 times to work this but only 2 times it worked(850 mhz) and after restarting pc, i tried to work it again, but it didnt.
i also asked some other ge60-ge70 owners on a turkish forum, half of them have this no-boost issue aswell.

yes that's normal, dx is basic info and don't shows discrete cards.
remove current vga drivers in safe mode with >>Driver Fusion<<
then reboot to normal mode and install those drivers:
http://www.msi.com/service/download/nbdriver-19169.html

Similar Messages

  • MSI GE70 2OE TURBO BOOST

    I own a msi ge70 2oe ssd version.Turbo boost is not working.
    Notebook is on high performance or balanced mode doesn't matter it only goes 2.4 ghz max.(Max gpu %100)I tested max cpu clock rate in Intel Processor Diagnostic Tool and cpu-z while playing battlefield 4.
    Bios version 1757IMS.516
    Firmware version 1757EMS1.506
    Battery plugged and ac adapter plugged in.

    Quote from: darkhawk on 13-December-13, 10:05:06
    The reason it probably goes to 3.x GHz right away and then drops rather quickly to 2.4 GHz is most likely due to heat. 97C is getting close to the Tmax for the processor, and it's probably throttling back the CPU in order to keep it from being hurt.
    Most likely you need to open the notebook up and replace the heatsink compound on the CPU and GPU (89C is rather hot IMHO for the GPU).
    Or you can contact MSI and do an RMA.
    >>How to contact MSI.<<
    So you are saying that there is no another solution for this issue?

  • MSI GE70 Doesn't Support Virtual Machines

    I'm running Windows 7 x64 on my MSI GE70 and was planning to run a virtual machine for testing purposes. I tried using VMWare Workstation and Oracle VirtualBox but both are showing the same error about VT-X not being enabled/supported. I tried running the MSIHQ Tool and it identified this version of the BIOS on my laptop:
    MSIHQ: Information detected by MSIHQ Tool ver: 1.25g
    MSIHQ: Report generated in Fri 03/07/2014 at 20:40:58.01
    Mainboard:  MS-1756
    PCB Version:  REV:1.0
    BIOS Version: E1756IMS.10F
    BIOS Date:  12/18/2012
    EC-FW Version: 
    I tried downloading the most updated version of the GE70's BIOS for Windows 7 and it seems to be of the same version though the release date is 2012-12-26, while my existing BIOS date is 12/18/2012. I'm having doubts that this will resolve the issue since the BIOS version is the same as the one I've downloaded from the MSI website:  E1756IMS.10F.

    http://yoyoclouds.wordpress.com/2012/04/25/how-to-check-whether-your-pc-has-virtualization-enabled-or-not/
    Take a look at that. Most likely Windows isn't configured right for it.

  • MSI GE70 2OE - turbo boost doesnt work ?

    Hey all,
    im confused of intel turbo boost technology.
    I think my notebook wont boost up and I dont know why. My bios is locked so I can not do any overclocking ...
    I dont know why but i can not install intel extreme tuning (dont launch when istalled ...)
    My power plan settings: maximum performance (100% CPU in detailed settings)
    CPU still shows max 2,4 GHZ (in HWinfo) here's the screen:
    Also, my question is: how to enable turbo boost when my bios is locked ?

    Thank you for answer.
    Yes you're right but it isnt my case.
    I have already solved it. Problem was here:
    battery and power cable (both together) must be connected in notebook at same time !!
    Otherwise turbo boost will be permanently off. So, not only battery or power cable affects this turbo effect,.. but both of this things must be plugged in notebook at same time ... :/ damn

  • MSI GE70 2OE-012NL lost Turbo Boost after updating firmware? (or not)

    Read EDIT2
    Hi,
    I just found out about the 2013-08-15 firmware update (version 1506) for my MSI GE70 2OE-012NL.
    After flashing this, my cpu load doesn't go over 99% and max speed is around 2.38GHz. Before it had peaks to 3.40Ghz because of the Turbo Boost. (tested with Intel's Processor Diagnostic Tool)
    Any insight on this?
    EDIT: speed reduction is very noticable in applications like AutoCAD/REVIT/Cubase (rendering) and games (Battlefield 3 automatically threw me back to 'low' profile in graphic settings where it was 'high' before).
    EDIT2: it's going up to 3.29Ghz again with a new test in Intel's Processor Diagnostic Tool. Weird. Nevertheless I would like to know what the differences are.

    Quote from: darkhawk on 13-December-13, 10:05:06
    The reason it probably goes to 3.x GHz right away and then drops rather quickly to 2.4 GHz is most likely due to heat. 97C is getting close to the Tmax for the processor, and it's probably throttling back the CPU in order to keep it from being hurt.
    Most likely you need to open the notebook up and replace the heatsink compound on the CPU and GPU (89C is rather hot IMHO for the GPU).
    Or you can contact MSI and do an RMA.
    >>How to contact MSI.<<
    So you are saying that there is no another solution for this issue?

  • MSI R9 280 Gaming 3G won't boost - stuck at 827mhz

    Hi all, I used DDU to remove my Nvidia driver in safe mode, I then fitted the 280 and booted into windows and installed the latest AMD 14.9 WHQL driver.
    I tested the card in Unigine Heaven as I do with all new cards, using MSI Afterburner for monitoring.
    The card boosted initially, ran at normal temps and didn't experience issues, I played Bioshock infinite for a while and then went back to the desktop.
    Next app I launch, the card clock is stuck at 827mhz and won't budge, adjusting clocks in MSI afterburner does nothing, the fan control works but that's it.
    I have re installed the drivers multiple times with complete removal each time to no avail, occasionally the card will boost after booting up, but within a few minutes it will revert to 827mhz and refuse to budge.
    My specs below
    Intel 3570K
    ASUS P8Z77-V Pro
    8GB Vengeance 1600mhz
    Seagate Barracuda 1TB
    MSI R9 280 Gaming 3G
    Windows 7 x64
    Corsair AX750 PSU
    Any help appreciated, trying to work out if this is a software or hardware issue, I downloaded MSI Live Update and it reports that the card's BIOS is the latest version, as are all my other drivers.

    In what games does the card not boost? Temps under load? GPU usage in %?
    Try running Unigine valley Benchmark in Extreme HD: https://unigine.com/products/valley/download/
    For monitoring use Afterburner: >>How to use MSI Afterburner<<

  • MSI GE70 stuck in BIOS

    Hello,
    My MSI GE70 was working fine, but suddenly when I turn it on it goes straight into BIOS - every single time. I suspected the DEL key might have been stuck, but it isn't. Do you have any suggestions as to what I could do?
    Thank you!

    If there's no bootable storage device detected by the system or selecting wrong boot mode (legacy/UEFI) or SATA mode (AHCI/RAID), it will go straight into BIOS, which means...your storage is probably dead (or one of them dead and fails the RAID).
    You can remove your storage device and test it on other machines to confirm this.

  • MSI GE70 GTX760 KLM doesn't change colour

    Hello,
    I bought my MSI GE70 few months ago, now I can see that some of other models have colourfull keyboard led highlight. Is it any way to make this work for me? I was downloaded latest SCM and KLM software, but nothig change... keyboard lights up only with blue...
    Thanks for your advice

    The backlight keyboard on your nb (according to the product page) is only with blue color LED backlight.
    If there is no other color LED on it, how KLM can make it work!?

  • MSI GE70 Apache Pro unboxing

    Here we have the awesome MSI GE70 Apache Pro (GE70 2PE-051UK) for our unboxing! As you can see it has all the trademark MSI logo, slogan and some of the other world class brands which feature on this notebook such as the Killer network who provide the fastest possible network speeds for lightening quick connection when gaming! The sound is by Danish specialists Dynaudio for unbeatable clarity. Dynaudio is only used on the best quality products, they also provide there sound systems to top cars such as Bugatti; showing they provide only top quality sound. The keyboard is by Steelseries; pioneers in the gaming peripheral department. They provide the top quality keyboard produced for the ease of use for gamers therefore improving you’re gaming skills! On the side of the box is the model and spec of the notebook inside.
    First thing you see when the box is open is the power lead and unit, as shown the power unit is very thin and light; like the notebook itself so therefore great for portability!
    Also we have the sleeve with a driver CD, warranty booklet/form, quick start guide, hot key F3 recovery function booklet, CE Compliance booklet and finally a competition entry to win a free notebook!
    Now for the main event; the notebook itself! Inside the box we have supports to hold the notebook to make sure it’s safe when being delivered. Once it’s out of the box we have the notebook in a protective sleeve and under this is the screen sleeve to protect further! Here is the GE70 out of the protective sleeves, the lid of the notebook is brushed aluminium and has simple and effective MSI branding; the dragon in Asian legends means the king of the world, this represents MSI commitment to provide only the highest standard of gaming notebooks to gamers worldwide. As well as this, the dragon on the logo is backlit and adds to the already awesome look of the notebook.
    On the front of the notebook there are the LED indicator’s, we have the disc indicator, Bluetooth, WLAN, battery, caps lock, num lock and finally the sleep.
    On the left side of the notebook we have an SD card slot, gold flash headphone jacks with MSI audio boost which enhances sound clarity and fidelity by 30%; just another feature which can make your gaming and multimedia experience much better! There are 2 USB 3.0 slots, HDMI port, ventilation, power plug and the security lock.
    On the right side of the notebook we have the gigabyte Ethernet port, VGA port, high power USB 2.0 for when you need to charge your mobile fast (or any other device), BD Combo / DVD Super multi and another USB 2.0!
    Here’s the back of the laptop, as you can see it has a sleek design like the rest of the notebook.
    The screen itself is a 17.3” Full HD (1920x1080) anti-glare LCD panel in LED backlight, the anti-glare itself is very use full for gaming and other tasks as you can use the notebook in any conditions and still have maximum use at all time!
    Here we have the full keyboard layout by Steelseries, it features a fully backlit keyboard with over 1000 different colour combinations and five different scenario modes for the keyboard! So weather you’re at home gaming in the dark or at a LAN party, you can have the coolest looking keyboard with high visibility for every key; enabling you to maximize your gaming skills in every situation. This keyboard also supports multi keys; therefore allowing users to rapidly respond to games with precision and issue commands rapidly. You can learn more about the Steelseries keyboard and engine here:
    Featured on the steel series keyboard is a change to the usual keyboard layout, the left Ctrl button has been made larger than usual as it is an important key for gamers and is now more accessible when gaming.
    The windows button on this keyboard has also moved from the left of the keyboard to the right side, this has been done in favour of gamers so the button doesn’t get in the way when you are gaming. All these little details maximize your gaming experience way more than your normal keyboard!
    On the GE70 we have world class sound provided by Danish sound specialists Dynaudio! The notebook has speakers located above the keyboard and also has 2 other speakers on the underside of the notebook closest to the front. The speakers support 7.1 channel SPDIF output, features exclusive audio boost technology which enhances sound clarity and fidelity by 30%! All together increasing the gaming and multimedia experience with the great sound provided. You can learn more about the Dynaudio sound here:
    [video=youtube;tE8FBiuGsBo]
    The back of the notebook has 5 rubber studs to keep the notebook secure when stationary; therefore no movement when using the notebook. The battery is a 6-Cell Li-Ion, there are several ventilation spots to keep the notebook running cool at all time.
    Here is the spec of the notebook
    Operating System   Windows 8.1
    Processor / chipset
    CPU   Intel Core i7 (4th Gen) 4700HQ / 2.4 GHz
    Max Turbo Speed   3.4 GHz
    Number of Cores   Quad-Core
    64-bit Computing   Yes
    Chipset   Mobile Intel HM87 Express
    Features   Intel Turbo Boost Technology 2.0
    Memory
    RAM   16 GB ( 2 x 8 GB )
    Technology   DDR3L SDRAM
    Storage
    Hard Drive   256 GB SSD - MSI Super RAID
    SSD Form Factor   mSATA
    Hard Drive (2nd)   1 TB HDD / 7200 rpm - Serial ATA-600
    Optical Drive   DVD±RW (±R DL) / DVD-RAM
    Display
    Type   17.3"
    LCD Backlight Technology   LED backlight
    Resolution   1920 x 1080 ( Full HD )
    Widescreen   Yes
    Image Aspect Ratio   16:9
    Features   Anti-glare, MSI Matrix Display
    Audio & video
    Graphics Processor   NVIDIA GeForce GTX 860M - 2 GB GDDR5 SDRAM
    Camera   Integrated webcam
    Capture Resolutions   1280 x 720
    Sound   Speakers, subwoofer , microphone
    Audio Features   Dynaudio Premium Sound Technology, MSI Audio Boost
    Input
    Type   Touchpad, backlit keyboard
    Communications
    Wireless   802.11n, Bluetooth 4.0
    Network Interface   Gigabit Ethernet
    Ethernet Controller   Killer E2200 Intelligent Networking
    Battery
    Technology   6-cell Lithium Ion
    Capacity   49 Wh
    Run Time   Up to 4 hours
    Ac adapter
    Output   120 Watt
    Connections & expansion
    Interfaces   2 x USB 2.0 ¦ 2 x USB 3.0 ¦ LAN ¦ VGA ¦ HDMI ¦ Headphone output ¦ Microphone input
    Memory Card Reader   Yes ( SD Card, SDHC Card, SDXC Card )
    Miscellaneous
    Features   Cooler Boost technology, SteelSeries gaming keyboard
    Dimensions & weight
    Width   41.8 cm
    Depth   26.9 cm
    Height   3.9 cm
    Weight   3 kg
    This is the MSI boot configure, it’s the first software that opens on start of your MSI notebook. It’s a thoughtful program which is designed to let you choose how you want your notebook to boot up, the 2 screenshots show the options available; you can choose between the windows 8.1 metro or the normal desktop screen on log in. As well you have the option to choose whether the start button goes to the start screen or the app screen. This simple program allows you to customize your notebook to your needs!
    The GE70 has a Killer E2200 Intelligent networking LAN chip. It automatically detects and accelerates game traffic for smoother, faster gameplay by recognizing and prioritising online game data packs. Therefore in any game you’re playing weather a FPS or MMO you will always have the fastest response time possible in every situation! You can also manually decide the priority of each application to maximize network performance on the programs you need the most! You can see more on the killer network on our youtube -
    [video=youtube;bc4Y4VxOA-g]
    Now to test the system with the latest high demand games! We tested the system with crysis 3, metro last light, assassin's creed IV and battlefield 4. All these games require very high spec systems and are great for testing; we tested them on max settings and also on Nvidia’s optimized settings for each game. Nvidia has made it easy to optimize the settings to get the best performance possible out of the notebook with the GeForce experience! You can auto-optimize game settings for best performance and tweak them if you want better graphics or better frame rate.
    The result are as follows:
    Crysis 3 maxed out ran at an average of 20-30 FPS and with Nvidia’s optimized settings it ran at an average of 55-65 FPS.
    Metro last light maxed out ran at an average of 30-40 FPS and with Nvidia’s optimized settings it ran at an average of 50-60 FPS.
    Assassin’s creed IV maxed out ran at an average of 30-40 FPS and with Nvidias optimized settings it ran at an average of 35-45 FPS.
    Battlefield 4 maxed out ran at an average of 35-45 FPS and with Nvidia’s optimized settings it ran at an average of 50-60 FPS.
    All round great results from some of the highest demanding games on the market, it shows that the GE70 is capable of keeping up with your gaming needs while still being a portable, slim and light notebook.

    It is extra ventilation for cooling! Quote from: RepoSnow;104046
    I actually just bought one of these- 012 US model and it hasnt got here yet but do you know what these two rows of dots are on the back? (Picture #15) http://i60.tinypic.com/34h9xfb.jpg

  • MSI GE70 2OE-011NE gpu problem

    Hi! i bought a Msi Ge70 with a gtx765m today and as with every new computer i buy i try this windows performance tool to see if its good or bad, and with this my gpu is wow im kinda chocked of the results. I get for gfx 4.3 and for gaming like 6.4 and with my old laptop with a gt 635m i get 5.0 for gfx and 6.6 for gaming whats up with this?
    Since i figure that this ms thingy might not be the best to check it on i downloaded 3dmark, really dont know what my results should be but i checked a computer with same specs and that one got like 30% more than mine.
    3dmark.com/3dm/1276250
    If u check this one the gpu core clock is 405 mhz is this right? ive read something about 850 mhz + boost.
    Sorry for the spelling my english isnt the best
    Peace

    The Windows score is really all bull crap. It doesn't mean anything. Yes, it sort of does, but that's just it, when you run that test, it doesn't use the NVidia GTX765M, it ends up using the Intel iGPU, which sucks. This explains the really low rating, instead of a much higher one that might be expected.
    Your older laptop with a GT635M got higher scores because it probably did not use Optimus technology, and therefore was ALWAYS using the GT635M, and would always get good performance (relatively anyway) because of that.
    The GE70 uses NVidia Optimus technology to switch between the Intel iGPU (on the CPU) and the GTX765M.
    I would ignore the Windows score. On my GT70 0NE with a GTX680M, my desktop graphics score is a 5.5, whereas every other score is 7.1 or higher. If I force it to run with the NVidia enabled (which is possible) it will be much higher, I just don't bother because again, it's a rather meaningless score.
    Enjoy the new laptop, you'll notice it more in games and such when compared to the old one!

  • New MSI GE70 2PE laptop screen not turning on/potential graphics problem

    Hi all,
    This is very frustrating for me!
    I've just bought a brand new MSI GE70 2PE gaming laptop for my partner and turning on causes the power on light to blink blue and orange - something i'm struggling to find any information online for. The screen remains black with no backlight or turning on. I have tried plugging the laptop through VGA into my monitor and it also says it cannot pick up any signal.
    This is leading me to think it is some sort of graphics related problem. The disc drive is ejecting, I can hear the processor ticking along and all the fans etc are on - so it's not completely dead.
    The fan is actually pumping out fairly warm air too, when left idle which to me seems a little odd too - I wouldn't thought it would be struggling at this point.
    I have no idea what is going on, if the laptop is completely faulty or its something I am overlooking. It's supposedly 'brand new' - well the box was sealed and this problem has occurred from the first time I have tried to boot it.
    I've tried running it on battery, purely on AC and this doesn't seem to make a difference.
    Any ideas people? This is super frustrating and I don't want to have to get in contact with MSI about this for some sort of warantee job.
    Thanks in advance! 

    Hello hybridoriental,
    Since your laptop is still brand new one under the warranty, I'll suggest you send it to the MSI service centers or MSI authorized service points for inspections.
    The power light in orange means the system is accessing the discrete GPU. Looks like your laptop stuck in a loop before it started the BIOS. Just make sure you installed the battery and plugged the AC power before you turn it on. If it still doesn't work, it would be better and time-saving to send it to someone whom can inspect and take care of the laptop rather than figure it out by yourself. 

  • Safe Temperatures - MSI GE70 0NC

    So, I've been googling and (obviously) searching through this forum to find some sort of answer to my question regarding the safe temperatures of the CPU and GPU of the MSI GE70 0NC. This is due to the fact that my Intel Core i7-3610m is running (Turbo Boost disabled) at around 101 degrees Celsius (with a laptop cooler pad) when under heavy loads and also because my GPU reaches temperatures around 95 degrees Celsius while playing any game using the nVidia 650m. Would any kind fellow out there answer this question: What are the supposed safe temperatures of this laptop? (because I am getting worried here)
    ((Idle Temperatures at around 50 degrees Celsius, within two minutes of heavy load the temperature is up at around 101 degrees Celsius - For the CPU))

    The reality is that idling the CPU should be around 40C when the laptop is in a room that is at around 25C (room temperature). The GPU should be similar.
    Under full load, the CPU should really be in the 60 to 75C range, and the GPU should again be very similar, if not lower.
    Most likely either the fans are clogged like badboy2k suggests, or the heatsink compound/grease is not working effectively.
    You can either RMA the laptop, or just fix it yourself. Personally, fixing it yourself is the best option as it's not difficult to dismantle and then replace the compound. I would suggest some silver based thermal compound, generic or name brand doesn't really matter much, you won't really notice a difference yourself if done properly.

  • NVIDIA Optimus on MSI GE70 2OE: No screens, then server fails to start

    Hello,
    I have recently acquired an MSI GE70 2OE-071 laptop with the following configuration, intending to run Arch Linux (dual boot with Windows 7) on it:
    CPU: Intel Core i7-4700 MQ
    GPU: Nvidia GeForce GTX 765M (2 GB DDR5 memory)
    LCD: 17.3" FHD 1920x1080
    Memory: 12 GB DDR3
    HDD: 1 TB 7200 RPM
    I originally installed Arch Linux the same way as described in the beginner's guide. I could get the basic twm setup to work, but the moment I installed the proprietary drivers (using pacman -S nvidia, followed by nvidia-xconfig, followed by a reboot), X Windows crashed, i.e. I started getting the No screens found error. So after some days of digging, I found the NVIDIA Optimus wiki page. Following the advice here, I could get rid of this error, but I still cannot get into the GUI, because the server terminates. There is no hardware problem that I can think of because Manjaro Linux works fine, and being a perpetual Arch novice eager to learn, I just wanted to get this thing to work from the ground up.
    So I'd really appreciate some help.
    Here are the relevant files and command outputs.
    uname -a. url = http://bpaste.net/show/166840/
    Linux gluon 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64 GNU/Linux
    .xinitrc. url = http://bpaste.net/show/166837/
    xrandr --setprovideroutputsource modesetting NVIDIA-0
    xrandr --auto
    /etc/X11/xorg.conf. url = http://bpaste.net/show/166838/
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 331.20 (buildmeister@swio-display-x86-rhel47-05) Wed Oct 30 18:20:53 PDT 2013
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BusID "PCI:1:0:0" # manually added
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    /var/log/Xorg.0.log. url = http://bpaste.net/show/166839/
    [ 1684.463]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 1684.465] X Protocol Version 11, Revision 0
    [ 1684.465] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 1684.466] Current Operating System: Linux gluon 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64
    [ 1684.466] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d2a5754c-c679-48b4-9b12-02ae94b83604 rw quiet
    [ 1684.467] Build Date: 06 January 2014 10:25:32PM
    [ 1684.467]
    [ 1684.468] Current version of pixman: 0.32.4
    [ 1684.469] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 1684.469] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 1684.472] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 11 07:17:09 2014
    [ 1684.472] (==) Using config file: "/etc/X11/xorg.conf"
    [ 1684.473] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 1684.473] (==) ServerLayout "Layout0"
    [ 1684.473] (**) |-->Screen "Screen0" (0)
    [ 1684.473] (**) | |-->Monitor "Monitor0"
    [ 1684.473] (**) | |-->Device "Device0"
    [ 1684.473] (**) |-->Input Device "Keyboard0"
    [ 1684.473] (**) |-->Input Device "Mouse0"
    [ 1684.473] (==) Automatically adding devices
    [ 1684.473] (==) Automatically enabling devices
    [ 1684.473] (==) Automatically adding GPU devices
    [ 1684.473] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 1684.473] Entry deleted from font path.
    [ 1684.473] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 1684.473] Entry deleted from font path.
    [ 1684.473] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 1684.473] Entry deleted from font path.
    [ 1684.473] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 1684.473] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 1684.473] Entry deleted from font path.
    [ 1684.473] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 1684.473] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 1684.473] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 1684.473] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 1684.473] (WW) Disabling Keyboard0
    [ 1684.473] (WW) Disabling Mouse0
    [ 1684.473] (II) Loader magic: 0x7fac20
    [ 1684.473] (II) Module ABI versions:
    [ 1684.473] X.Org ANSI C Emulation: 0.4
    [ 1684.473] X.Org Video Driver: 14.1
    [ 1684.473] X.Org XInput driver : 19.1
    [ 1684.473] X.Org Server Extension : 7.0
    [ 1684.473] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 1684.473] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 1684.474] (--) PCI:*(0:0:2:0) 8086:0416:1462:10e1 rev 6, Mem @ 0xf7400000/4194304, 0xb0000000/268435456, I/O @ 0x0000f000/64
    [ 1684.474] (--) PCI: (0:1:0:0) 10de:11e2:1462:10e1 rev 161, Mem @ 0xf6000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 1684.475] Initializing built-in extension Generic Event Extension
    [ 1684.476] Initializing built-in extension SHAPE
    [ 1684.476] Initializing built-in extension MIT-SHM
    [ 1684.477] Initializing built-in extension XInputExtension
    [ 1684.478] Initializing built-in extension XTEST
    [ 1684.478] Initializing built-in extension BIG-REQUESTS
    [ 1684.479] Initializing built-in extension SYNC
    [ 1684.479] Initializing built-in extension XKEYBOARD
    [ 1684.480] Initializing built-in extension XC-MISC
    [ 1684.481] Initializing built-in extension SECURITY
    [ 1684.481] Initializing built-in extension XINERAMA
    [ 1684.482] Initializing built-in extension XFIXES
    [ 1684.482] Initializing built-in extension RENDER
    [ 1684.483] Initializing built-in extension RANDR
    [ 1684.484] Initializing built-in extension COMPOSITE
    [ 1684.484] Initializing built-in extension DAMAGE
    [ 1684.485] Initializing built-in extension MIT-SCREEN-SAVER
    [ 1684.485] Initializing built-in extension DOUBLE-BUFFER
    [ 1684.486] Initializing built-in extension RECORD
    [ 1684.487] Initializing built-in extension DPMS
    [ 1684.487] Initializing built-in extension X-Resource
    [ 1684.488] Initializing built-in extension XVideo
    [ 1684.488] Initializing built-in extension XVideo-MotionCompensation
    [ 1684.489] Initializing built-in extension XFree86-VidModeExtension
    [ 1684.489] Initializing built-in extension XFree86-DGA
    [ 1684.490] Initializing built-in extension XFree86-DRI
    [ 1684.490] Initializing built-in extension DRI2
    [ 1684.490] (II) LoadModule: "glx"
    [ 1684.490] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 1684.490] (II) Module glx: vendor="X.Org Foundation"
    [ 1684.490] compiled for 1.14.5, module version = 1.0.0
    [ 1684.490] ABI class: X.Org Server Extension, version 7.0
    [ 1684.490] (==) AIGLX enabled
    [ 1684.491] Loading extension GLX
    [ 1684.491] (II) LoadModule: "nvidia"
    [ 1684.491] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 1684.491] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 1684.491] compiled for 4.0.2, module version = 1.0.0
    [ 1684.491] Module class: X.Org Video Driver
    [ 1684.491] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
    [ 1684.491] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 1684.491] (++) using VT number 1
    [ 1684.491] (II) Loading sub module "fb"
    [ 1684.491] (II) LoadModule: "fb"
    [ 1684.491] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1684.491] (II) Module fb: vendor="X.Org Foundation"
    [ 1684.491] compiled for 1.14.5, module version = 1.0.0
    [ 1684.491] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1684.491] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 1684.491] (II) Loading sub module "wfb"
    [ 1684.491] (II) LoadModule: "wfb"
    [ 1684.491] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 1684.491] (II) Module wfb: vendor="X.Org Foundation"
    [ 1684.491] compiled for 1.14.5, module version = 1.0.0
    [ 1684.491] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1684.491] (II) Loading sub module "ramdac"
    [ 1684.491] (II) LoadModule: "ramdac"
    [ 1684.491] (II) Module "ramdac" already built-in
    [ 1684.491] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 1684.491] (==) NVIDIA(0): RGB weight 888
    [ 1684.492] (==) NVIDIA(0): Default visual is TrueColor
    [ 1684.492] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 1684.492] (**) NVIDIA(0): Enabling 2D acceleration
    [ 1684.492] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
    [ 1684.492] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
    [ 1684.492] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
    [ 1684.492] (EE) NVIDIA(0): you continue to encounter problems, Please try
    [ 1684.492] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
    [ 1684.654] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 1684.655] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 765M (GK106) at PCI:1:0:0 (GPU-0)
    [ 1684.655] (--) NVIDIA(0): Memory: 2097152 kBytes
    [ 1684.655] (--) NVIDIA(0): VideoBIOS: 80.06.5d.00.09
    [ 1684.655] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 1684.655] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 765M at PCI:1:0:0
    [ 1684.655] (--) NVIDIA(0): none
    [ 1684.655] (II) NVIDIA(0): Validated MetaModes:
    [ 1684.655] (II) NVIDIA(0): "NULL"
    [ 1684.655] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
    [ 1684.655] (WW) NVIDIA(0): Unable to get display device for DPI computation.
    [ 1684.655] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [ 1684.655] (--) Depth 24 pixmap format is 32 bpp
    [ 1684.655] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 1684.655] (II) NVIDIA: access.
    [ 1684.661] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 1684.661] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 1684.661] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 1684.661] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 1684.661] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 1684.661] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 1684.661] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 1684.661] (II) NVIDIA(0): Config Options in the README.
    [ 1684.661] (II) NVIDIA(0): Setting mode "NULL"
    [ 1684.661] (EE) NVIDIA(0): Failed to initiate mode change.
    [ 1684.661] (EE) NVIDIA(0): Failed to complete mode change
    [ 1684.668] (II) NVIDIA(0): Built-in logo is bigger than the screen.
    [ 1684.668] Loading extension NV-GLX
    [ 1684.670] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 1684.670] (==) NVIDIA(0): Backing store disabled
    [ 1684.670] (==) NVIDIA(0): Silken mouse enabled
    [ 1684.670] (**) NVIDIA(0): DPMS enabled
    [ 1684.670] Loading extension NV-CONTROL
    [ 1684.670] (II) Loading sub module "dri2"
    [ 1684.670] (II) LoadModule: "dri2"
    [ 1684.670] (II) Module "dri2" already built-in
    [ 1684.670] (II) NVIDIA(0): [DRI2] Setup complete
    [ 1684.670] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 1684.670] (--) RandR disabled
    [ 1684.673] (II) AIGLX: Screen 0 is not DRI2 capable
    [ 1684.673] (II) AIGLX: Screen 0 is not DRI capable
    [ 1684.680] (II) AIGLX: Loaded and initialized swrast
    [ 1684.680] (II) GLX: Initialized DRISWRAST GL provider for screen 0
    [ 1684.697] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 1684.697] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1684.697] (II) LoadModule: "evdev"
    [ 1684.697] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 1684.697] (II) Module evdev: vendor="X.Org Foundation"
    [ 1684.697] compiled for 1.14.3, module version = 2.8.2
    [ 1684.697] Module class: X.Org XInput Driver
    [ 1684.697] ABI class: X.Org XInput driver, version 19.1
    [ 1684.697] (II) Using input driver 'evdev' for 'Power Button'
    [ 1684.697] (**) Power Button: always reports core events
    [ 1684.697] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 1684.697] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 1684.697] (--) evdev: Power Button: Found keys
    [ 1684.697] (II) evdev: Power Button: Configuring as keyboard
    [ 1684.697] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
    [ 1684.697] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 1684.697] (**) Option "xkb_rules" "evdev"
    [ 1684.697] (**) Option "xkb_model" "pc104"
    [ 1684.697] (**) Option "xkb_layout" "us"
    [ 1684.709] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
    [ 1684.709] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 1684.709] (II) Using input driver 'evdev' for 'Video Bus'
    [ 1684.709] (**) Video Bus: always reports core events
    [ 1684.709] (**) evdev: Video Bus: Device: "/dev/input/event12"
    [ 1684.709] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 1684.709] (--) evdev: Video Bus: Found keys
    [ 1684.709] (II) evdev: Video Bus: Configuring as keyboard
    [ 1684.709] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13/event12"
    [ 1684.709] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 1684.709] (**) Option "xkb_rules" "evdev"
    [ 1684.709] (**) Option "xkb_model" "pc104"
    [ 1684.709] (**) Option "xkb_layout" "us"
    [ 1684.709] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 1684.709] (II) No input driver specified, ignoring this device.
    [ 1684.709] (II) This device may have been added with another device file.
    [ 1684.709] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
    [ 1684.709] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 1684.709] (II) Using input driver 'evdev' for 'Video Bus'
    [ 1684.709] (**) Video Bus: always reports core events
    [ 1684.709] (**) evdev: Video Bus: Device: "/dev/input/event11"
    [ 1684.709] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 1684.709] (--) evdev: Video Bus: Found keys
    [ 1684.709] (II) evdev: Video Bus: Configuring as keyboard
    [ 1684.709] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:48/LNXVIDEO:00/input/input12/event11"
    [ 1684.709] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 1684.709] (**) Option "xkb_rules" "evdev"
    [ 1684.709] (**) Option "xkb_model" "pc104"
    [ 1684.709] (**) Option "xkb_layout" "us"
    [ 1684.710] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 1684.710] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1684.710] (II) Using input driver 'evdev' for 'Power Button'
    [ 1684.710] (**) Power Button: always reports core events
    [ 1684.710] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 1684.710] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 1684.710] (--) evdev: Power Button: Found keys
    [ 1684.710] (II) evdev: Power Button: Configuring as keyboard
    [ 1684.710] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event2"
    [ 1684.710] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
    [ 1684.710] (**) Option "xkb_rules" "evdev"
    [ 1684.710] (**) Option "xkb_model" "pc104"
    [ 1684.710] (**) Option "xkb_layout" "us"
    [ 1684.710] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 1684.710] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 1684.710] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event15)
    [ 1684.710] (II) No input driver specified, ignoring this device.
    [ 1684.710] (II) This device may have been added with another device file.
    [ 1684.710] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event14)
    [ 1684.710] (II) No input driver specified, ignoring this device.
    [ 1684.710] (II) This device may have been added with another device file.
    [ 1684.710] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=8 (/dev/input/event13)
    [ 1684.710] (II) No input driver specified, ignoring this device.
    [ 1684.710] (II) This device may have been added with another device file.
    [ 1684.710] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event9)
    [ 1684.710] (**) BisonCam, NB Pro: Applying InputClass "evdev keyboard catchall"
    [ 1684.710] (II) Using input driver 'evdev' for 'BisonCam, NB Pro'
    [ 1684.710] (**) BisonCam, NB Pro: always reports core events
    [ 1684.710] (**) evdev: BisonCam, NB Pro: Device: "/dev/input/event9"
    [ 1684.710] (--) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x14c
    [ 1684.710] (--) evdev: BisonCam, NB Pro: Found keys
    [ 1684.710] (II) evdev: BisonCam, NB Pro: Configuring as keyboard
    [ 1684.710] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input11/event9"
    [ 1684.710] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD, id 10)
    [ 1684.710] (**) Option "xkb_rules" "evdev"
    [ 1684.710] (**) Option "xkb_model" "pc104"
    [ 1684.710] (**) Option "xkb_layout" "us"
    [ 1684.711] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    [ 1684.711] (II) No input driver specified, ignoring this device.
    [ 1684.711] (II) This device may have been added with another device file.
    [ 1684.711] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
    [ 1684.711] (II) No input driver specified, ignoring this device.
    [ 1684.711] (II) This device may have been added with another device file.
    [ 1684.711] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
    [ 1684.711] (II) No input driver specified, ignoring this device.
    [ 1684.711] (II) This device may have been added with another device file.
    [ 1684.711] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 1684.711] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 1684.711] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 1684.711] (**) AT Translated Set 2 keyboard: always reports core events
    [ 1684.711] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 1684.711] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 1684.711] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 1684.711] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 1684.711] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 1684.711] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    [ 1684.711] (**) Option "xkb_rules" "evdev"
    [ 1684.711] (**) Option "xkb_model" "pc104"
    [ 1684.711] (**) Option "xkb_layout" "us"
    [ 1684.711] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
    [ 1684.711] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
    [ 1684.711] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
    [ 1684.711] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
    [ 1684.711] (II) LoadModule: "synaptics"
    [ 1684.711] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 1684.711] (II) Module synaptics: vendor="X.Org Foundation"
    [ 1684.711] compiled for 1.14.4, module version = 1.7.2
    [ 1684.711] Module class: X.Org XInput Driver
    [ 1684.711] ABI class: X.Org XInput driver, version 19.1
    [ 1684.711] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
    [ 1684.711] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 1684.711] (**) Option "Device" "/dev/input/event10"
    [ 1684.783] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 33)
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 33)
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
    [ 1684.783] (**) Option "TapButton1" "1"
    [ 1684.783] (**) Option "TapButton2" "2"
    [ 1684.783] (**) Option "TapButton3" "3"
    [ 1684.783] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 1684.783] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 1684.809] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event10"
    [ 1684.809] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
    [ 1684.810] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
    [ 1684.810] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
    [ 1684.810] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
    [ 1684.810] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
    [ 1684.810] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
    [ 1684.810] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
    [ 1684.810] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
    [ 1684.810] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 1684.810] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
    [ 1684.810] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 1684.810] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 1684.810] (II) No input driver specified, ignoring this device.
    [ 1684.810] (II) This device may have been added with another device file.
    [ 1684.810] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event5)
    [ 1684.810] (**) MSI WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 1684.810] (II) Using input driver 'evdev' for 'MSI WMI hotkeys'
    [ 1684.810] (**) MSI WMI hotkeys: always reports core events
    [ 1684.810] (**) evdev: MSI WMI hotkeys: Device: "/dev/input/event5"
    [ 1684.810] (--) evdev: MSI WMI hotkeys: Vendor 0 Product 0
    [ 1684.810] (--) evdev: MSI WMI hotkeys: Found keys
    [ 1684.810] (II) evdev: MSI WMI hotkeys: Configuring as keyboard
    [ 1684.810] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event5"
    [ 1684.810] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 13)
    [ 1684.810] (**) Option "xkb_rules" "evdev"
    [ 1684.810] (**) Option "xkb_model" "pc104"
    [ 1684.810] (**) Option "xkb_layout" "us"
    [ 1685.097] (II) evdev: MSI WMI hotkeys: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) UnloadModule: "synaptics"
    [ 1685.097] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) evdev: BisonCam, NB Pro: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) evdev: Power Button: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) evdev: Video Bus: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) evdev: Video Bus: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) evdev: Power Button: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.116] (II) NVIDIA(GPU-0): Deleting GPU-0
    [b][ 1685.120] (EE) Server terminated successfully (0). Closing log file.[/b]
    lspci. url = http://bpaste.net/show/166842/
    00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
    00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
    00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
    00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
    00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
    00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
    00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
    00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
    00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
    00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d5)
    00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
    00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
    00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
    00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
    01:00.0 3D controller: NVIDIA Corporation GK106M [GeForce GTX 765M] (rev a1)
    03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5227 (rev 01)
    04:00.0 Ethernet controller: Qualcomm Atheros Killer E2200 Gigabit Ethernet Controller (rev 13)
    05:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723AE PCIe Wireless Network Adapter
    dmesg. url: http://bpaste.net/show/166841/
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d2a5754c-c679-48b4-9b12-02ae94b83604 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b171fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b172000-0x000000009b178fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009b179000-0x000000009b8e8fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b8e9000-0x000000009bb55fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009bb56000-0x00000000ab48ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ab490000-0x00000000ab697fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ab698000-0x00000000ab78bfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ab78c000-0x00000000abb73fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000abb74000-0x00000000abffefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000abfff000-0x00000000abffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ad000000-0x00000000af1fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000034fdfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Micro-Star International Co., Ltd. GE70 2OC\2OE/MS-1757, BIOS E1757IMS.10E 07/15/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x34fe00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
    [ 0.000000] 1 base 0200000000 mask 7F00000000 write-back
    [ 0.000000] 2 base 0300000000 mask 7F80000000 write-back
    [ 0.000000] 3 base 00C0000000 mask 7FC0000000 uncachable
    [ 0.000000] 4 base 00B0000000 mask 7FF0000000 uncachable
    [ 0.000000] 5 base 00AE000000 mask 7FFE000000 uncachable
    [ 0.000000] 6 base 00AD000000 mask 7FFF000000 uncachable
    [ 0.000000] 7 base 0360000000 mask 7FE0000000 uncachable
    [ 0.000000] 8 base 0350000000 mask 7FF0000000 uncachable
    [ 0.000000] 9 base 034FE00000 mask 7FFFE00000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xad000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xac000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff8800000fd770]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x34fc00000-0x34fdfffff]
    [ 0.000000] [mem 0x34fc00000-0x34fdfffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x34c000000-0x34fbfffff]
    [ 0.000000] [mem 0x34c000000-0x34fbfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x300000000-0x34bffffff]
    [ 0.000000] [mem 0x300000000-0x33fffffff] page 1G
    [ 0.000000] [mem 0x340000000-0x34bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9b171fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0x9affffff] page 2M
    [ 0.000000] [mem 0x9b000000-0x9b171fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9b179000-0x9b8e8fff]
    [ 0.000000] [mem 0x9b179000-0x9b1fffff] page 4k
    [ 0.000000] [mem 0x9b200000-0x9b7fffff] page 2M
    [ 0.000000] [mem 0x9b800000-0x9b8e8fff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x9bb56000-0xab48ffff]
    [ 0.000000] [mem 0x9bb56000-0x9bbfffff] page 4k
    [ 0.000000] [mem 0x9bc00000-0xab3fffff] page 2M
    [ 0.000000] [mem 0xab400000-0xab48ffff] page 4k
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xab698000-0xab78bfff]
    [ 0.000000] [mem 0xab698000-0xab78bfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xabfff000-0xabffffff]
    [ 0.000000] [mem 0xabfff000-0xabffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff]
    [ 0.000000] [mem 0x100000000-0x2ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x379fc000-0x37cf5fff]
    [ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 MSI_NB)
    [ 0.000000] ACPI: XSDT 00000000ab814098 000AC (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000ab8206b0 0010C (v05 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 00000000ab8141d8 0C4D4 (v02 MSI_NB MEGABOOK 00000022 INTL 20091112)
    [ 0.000000] ACPI: FACS 00000000abb72080 00040
    [ 0.000000] ACPI: APIC 00000000ab8207c0 00092 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 00000000ab820858 00044 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: ASF! 00000000ab8208a0 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: SSDT 00000000ab820948 00200 (v01 INTEL sensrhub 00000000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 00000000ab820b48 0019D (v01 Intel zpodd 00001000 INTL 20091112)
    [ 0.000000] ACPI: SLIC 00000000ab820ce8 00176 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: SSDT 00000000ab820e60 00575 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000ab8213d8 00AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: MCFG 00000000ab821eb0 0003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 00000000ab821ef0 00038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 00000000ab821f28 00315 (v01 SataRe SataTabl 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ab822240 0355D (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ab8257a0 011FD (v01 SgRef SgPeg 00001000 INTL 20091112)
    [ 0.000000] ACPI: MSFF 00000000ab8269a0 00029 (v01 MSI_NB MEGABOOK 00000010 AMI 00010013)
    [ 0.000000] ACPI: DMAR 00000000ab8269d0 00090 (v01 INTEL HSW 00000001 INTL 00000001)
    [ 0.000000] ACPI: SSDT 00000000ab826a60 01464 (v01 OptRef OptTabl 00001000 INTL 20120711)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000034fdfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x34fdfffff]
    [ 0.000000] NODE_DATA [mem 0x34fdf6000-0x34fdfafff]
    [ 0.000000] [ffffea0000000000-ffffea000d3fffff] PMD -> [ffff880343400000-ffff88034f3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x34fdfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x9b171fff]
    [ 0.000000] node 0: [mem 0x9b179000-0x9b8e8fff]
    [ 0.000000] node 0: [mem 0x9bb56000-0xab48ffff]
    [ 0.000000] node 0: [mem 0xab698000-0xab78bfff]
    [ 0.000000] node 0: [mem 0xabfff000-0xabffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x34fdfffff]
    [ 0.000000] On node 0 totalpages: 3125421
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 10893 pages used for memmap
    [ 0.000000] DMA32 zone: 697105 pages, LIFO batch:31
    [ 0.000000] Normal zone: 37880 pages used for memmap
    [ 0.000000] Normal zone: 2424320 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b172000-0x9b178fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b8e9000-0x9bb55fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xab490000-0xab697fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xab78c000-0xabb73fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xabb74000-0xabffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xac000000-0xacffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xad000000-0xaf1fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xaf200000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xaf200000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88034fa00000 s86464 r8192 d24128 u262144
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3076563
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d2a5754c-c679-48b4-9b12-02ae94b83604 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] ------------[ cut here ]------------
    [ 0.000000] WARNING: CPU: 0 PID: 0 at drivers/iommu/dmar.c:488 warn_invalid_dmar+0x7e/0x90()
    [ 0.000000] Your BIOS is broken; DMAR reported at address 0!
    BIOS vendor: American Megatrends Inc.; Ver: E1757IMS.10E; Product Version: REV:1.0
    [ 0.000000] Modules linked in:
    [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.6-1-ARCH #1
    [ 0.000000] Hardware name: Micro-Star International Co., Ltd. GE70 2OC\2OE/MS-1757, BIOS E1757IMS.10E 07/15/2013
    [ 0.000000] 000000000000000b ffffffff81801de8 ffffffff814ee4fb ffffffff81801e30
    [ 0.000000] ffffffff81801e20 ffffffff81062bcd ffffffff81b3101c ffffffff81b3106c
    [ 0.000000] 0000000000000000 ffff88034fdaad00 ffffffff819f4000 ffffffff81801e80
    [ 0.000000] Call Trace:
    [ 0.000000] [<ffffffff814ee4fb>] dump_stack+0x54/0x8d
    [ 0.000000] [<ffffffff81062bcd>] warn_slowpath_common+0x7d/0xa0
    [ 0.000000] [<ffffffff81062c84>] warn_slowpath_fmt_taint+0x44/0x50
    [ 0.000000] [<ffffffff818fb9d9>] ? early_ioremap+0x13/0x15
    [ 0.000000] [<ffffffff818f1b3f>] ? __acpi_map_table+0x13/0x18
    [ 0.000000] [<ffffffff813d98be>] warn_invalid_dmar+0x7e/0x90
    [ 0.000000] [<ffffffff81927a65>] check_zero_address+0x68/0xf4
    [ 0.000000] [<ffffffff81927b06>] detect_intel_iommu+0x15/0xae
    [ 0.000000] [<ffffffff818ebd5a>] pci_iommu_alloc+0x4a/0x6c
    [ 0.000000] [<ffffffff818fb3af>] mem_init+0x17/0x9c
    [ 0.000000] [<ffffffff818e1ccb>] start_kernel+0x1de/0x420
    [ 0.000000] [<ffffffff818e18f6>] ? repair_env_string+0x5c/0x5c
    [ 0.000000] [<ffffffff818e1120>] ? early_idt_handlers+0x120/0x120
    [ 0.000000] [<ffffffff818e15de>] x86_64_start_reservations+0x2a/0x2c
    [ 0.000000] [<ffffffff818e16e8>] x86_64_start_kernel+0x108/0x117
    [ 0.000000] ---[ end trace ed55042d28ea2d46 ]---
    [ 0.000000] Memory: 12223184K/12501684K available (5124K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 278500K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 50331648 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2394.605 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.76 BogoMIPS (lpj=7982016)
    [ 0.000004] pid_max: default: 32768 minimum: 301
    [ 0.000023] Security Framework initialized
    [ 0.000028] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000029] Yama: becoming mindful.
    [ 0.000723] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.002956] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.003897] Mount-cache hash table entries: 256
    [ 0.004021] Initializing cgroup subsys memory
    [ 0.004028] Initializing cgroup subsys devices
    [ 0.004029] Initializing cgroup subsys freezer
    [ 0.004030] Initializing cgroup subsys net_cls
    [ 0.004031] Initializing cgroup subsys blkio
    [ 0.004047] CPU: Physical Processor ID: 0
    [ 0.004047] CPU: Processor Core ID: 0
    [ 0.004050] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.004809] mce: CPU supports 9 MCE banks
    [ 0.004819] CPU0: Thermal monitoring enabled (TM1)
    [ 0.004828] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
    tlb_flushall_shift: 6
    [ 0.004901] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.005496] ACPI: Core revision 20130725
    [ 0.012467] ACPI: All ACPI Tables successfully acquired
    [ 0.014025] ftrace: allocating 20318 entries in 80 pages
    [ 0.020098] dmar: Host address width 39
    [ 0.020099] dmar: DRHD base: 0x00000000000000 flags: 0x1
    [ 0.020100] dmar: parse DMAR table failure.
    [ 0.020489] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.053520] smpboot: CPU0: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz (fam: 06, model: 3c, stepping: 03)
    [ 0.053525] TSC deadline timer enabled
    [ 0.053531] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.053535] ... version: 3
    [ 0.053536] ... bit width: 48
    [ 0.053537] ... generic registers: 4
    [ 0.053537] ... value mask: 0000ffffffffffff
    [ 0.053538] ... max period: 0000ffffffffffff
    [ 0.053539] ... fixed-purpose events: 3
    [ 0.053539] ... event mask: 000000070000000f
    [ 0.094311] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.080318] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK
    [ 0.218665] Brought up 8 CPUs
    [ 0.218667] smpboot: Total of 8 processors activated (38329.08 BogoMIPS)
    [ 0.224614] devtmpfs: initialized
    [ 0.226265] PM: Registering ACPI NVS region [mem 0x9b172000-0x9b178fff] (28672 bytes)
    [ 0.226266] PM: Registering ACPI NVS region [mem 0xab78c000-0xabb73fff] (4096000 bytes)
    [ 0.226792] RTC time: 6:49:04, date: 01/11/14
    [ 0.226816] NET: Registered protocol family 16
    [ 0.226875] cpuidle: using governor ladder
    [ 0.226876] cpuidle: using governor menu
    [ 0.226893] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.226894] ACPI: bus type PCI registered
    [ 0.226896] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.226930] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.226931] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.231360] PCI: Using configuration type 1 for base access
    [ 0.231828] bio: create slab <bio-0> at 0
    [ 0.231908] ACPI: Added _OSI(Module Device)
    [ 0.231909] ACPI: Added _OSI(Processor Device)
    [ 0.231910] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.231911] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.233324] ACPI: EC: Detected MSI hardware, enabling workarounds.
    [ 0.233326] ACPI: EC: Look up EC in DSDT
    [ 0.233774] ACPI Error: No handler for Region [EC__] (ffff88033e484c18) [EmbeddedControl] (20130725/evregion-162)
    [ 0.233777] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130725/exfldio-305)
    [ 0.233779] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC__._REG] (Node ffff88033e4852f8), AE_NOT_EXIST (20130725/psparse-536)
    [ 0.234482] ACPI: Executed 2 blocks of module-level executable AML code
    [ 0.268613] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.284659] ACPI: SSDT 00000000ab68dc18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.285133] ACPI: Dynamic OEM Table Load:
    [ 0.285135] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.298133] ACPI: SSDT 00000000ab68d618 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.298671] ACPI: Dynamic OEM Table Load:
    [ 0.298673] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.314712] ACPI: SSDT 00000000ab68cd98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.315188] ACPI: Dynamic OEM Table Load:
    [ 0.315190] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.339941] ACPI: Interpreter enabled
    [ 0.339948] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.339953] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.339965] ACPI: (supports S0 S3 S4 S5)
    [ 0.339967] ACPI: Using IOAPIC for interrupt routing
    [ 0.339990] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.340148] ACPI: No dock devices found.
    [ 0.366372] ACPI: Power Resource [FN00] (off)
    [ 0.366419] ACPI: Power Resource [FN01] (off)
    [ 0.366465] ACPI: Power Resource [FN02] (off)
    [ 0.366511] ACPI: Power Resource [FN03] (off)
    [ 0.366555] ACPI: Power Resource [FN04] (off)
    [ 0.367075] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.367173] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    [ 0.367293] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
    [ 0.367577] ACPI: \_SB_.PCI0.TPMX: can't evaluate _ADR (0x5)
    [ 0.367642] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
    [ 0.367643] ACPI: \_SB_.PCI0.DOCK: can't evaluate _ADR (0x5)
    [ 0.367659] ACPI: \_SB_.PCI0.WMI1: can't evaluate _ADR (0x5)
    [ 0.367660] PCI host bridge to bus 0000:00
    [ 0.367662] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.367663] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.367664] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.367665] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.367666] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.367667] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.367668] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.367669] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.367670] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.367671] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.367672] pci_bus 0000:00: root bus resource [mem 0xaf200000-0xfeafffff]
    [ 0.367677] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
    [ 0.367735] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
    [ 0.367760] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.367794] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.367819] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
    [ 0.367827] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
    [ 0.367832] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 0.367835] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 0.367887] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
    [ 0.367893] pci 0000:00:03.0: reg 0x10: [mem 0xf7b14000-0xf7b17fff 64bit]
    [ 0.367970] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
    [ 0.367986] pci 0000:00:14.0: reg 0x10: [mem 0xf7b00000-0xf7b0ffff 64bit]
    [ 0.368043] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.368071] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.368097] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
    [ 0.368113] pci 0000:00:16.0: reg 0x10: [mem 0xf7b1e000-0xf7b1e00f 64bit]
    [ 0.368169] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.368229] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
    [ 0.368247] pci 0000:00:1a.0: reg 0x10: [mem 0xf7b1c000-0xf7b1c3ff]
    [ 0.368328] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.368366] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.368391] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
    [ 0.368403] pci 0000:00:1b.0: reg 0x10: [mem 0xf7b10000-0xf7b13fff 64bit]
    [ 0.368460] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.368490] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.368512] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
    [ 0.368569] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.368599] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.368621] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
    [ 0.368678] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.368709] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.368731] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
    [ 0.368787] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.368817] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.368839] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
    [ 0.368896] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.368926] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 0.368953] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
    [ 0.368972] pci 0000:00:1d.0: reg 0x10: [mem 0xf7b1b000-0xf7b1b3ff]
    [ 0.369051] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.369089] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.369114] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
    [ 0.369249] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
    [ 0.369263] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
    [ 0.369269] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
    [ 0.369276] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
    [ 0.369283] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
    [ 0.369289] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
    [ 0.369296] pci 0000:00:1f.2: reg 0x24: [mem 0xf7b1a000-0xf7b1a7ff]
    [ 0.369328] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.369373] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
    [ 0.369385] pci 0000:00:1f.3: reg 0x10: [mem 0xf7b19000-0xf7b190ff 64bit]
    [ 0.369403] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 0.369506] pci 0000:01:00.0: [10de:11e2] type 00 class 0x030200
    [ 0.369520] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
    [ 0.369537] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.369552] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    [ 0.369563] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
    [ 0.369574] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
    [ 0.369649] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 0.374726] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.374728] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.374730] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.374733] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.374803] acpiphp: Slot [1] registered
    [ 0.374809] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.374970] pci 0000:03:00.0: [10ec:5227] type 00 class 0xff0000
    [ 0.375028] pci 0000:03:00.0: reg 0x10: [mem 0xf7a00000-0xf7a00fff]
    [ 0.375359] pci 0000:03:00.0: supports D1 D2
    [ 0.375360] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
    [ 0.375443] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 0.381443] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.381448] pci 0000:00:1c.2: bridge window [mem 0xf7a00000-0xf7afffff]
    [ 0.381581] pci 0000:04:00.0: [1969:e091] type 00 class 0x020000
    [ 0.381627] pci 0000:04:00.0: reg 0x10: [mem 0xf7900000-0xf793ffff 64bit]
    [ 0.381672] pci 0000:04:00.0: reg 0x18: [io 0xd000-0xd07f]
    [ 0.381900] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.381990] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.388100] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.388104] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [ 0.388108] pci 0000:00:1c.3: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.388207] pci 0000:05:00.0: [10ec:8723] type 00 class 0x028000
    [ 0.388235] pci 0000:05:00.0: reg 0x10: [io 0xc000-0xc0ff]
    [ 0.388284] pci 0000:05:00.0: reg 0x18: [mem 0xf7800000-0xf7803fff 64bit]
    [ 0.388429] pci 0000:05:00.0: supports D1 D2
    [ 0.388430] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.388469] pci 0000:05:00.0: System wakeup disabled by ACPI
    [ 0.394758] pci 0000:00:1c.5: PCI bridge to [bus 05]
    [ 0.394762] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.394766] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.394830] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.402198] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.402232] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
    [ 0.402263] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.402295] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.402326] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.402357] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.402388] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 0.402419] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.402688] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 0.402692] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.402741] Found 1 acpi root devices
    [ 0.402767] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.402823] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.402826] vgaarb: loaded
    [ 0.402826] vgaarb: bridge control possible 0000:00:02.0
    [ 0.402849] PCI: Using ACPI for IRQ routing
    [ 0.404045] PCI: pci_cache_line_size set to 64 bytes
    [ 0.404093] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.404094] e820: reserve RAM buffer [mem 0x9b172000-0x9bffffff]
    [ 0.404095] e820: reserve RAM buffer [mem 0x9b8e9000-0x9bffffff]
    [ 0.404096] e820: reserve RAM buffer [mem 0xab490000-0xabffffff]
    [ 0.404097] e820: reserve RAM buffer [mem 0xab78c000-0xabffffff]
    [ 0.404098] e820: reserve RAM buffer [mem 0x34fe00000-0x34fffffff]
    [ 0.404149] NetLabel: Initializing
    [ 0.404150] NetLabel: domain hash size = 128
    [ 0.404150] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.404157] NetLabel: unlabeled traffic allowed by default
    [ 0.404169] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.404172] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.406193] Switched to clocksource hpet
    [ 0.408777] pnp: PnP ACPI init
    [ 0.408783] ACPI: bus type PNP registered
    [ 0.408822] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.408824] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.408831] pnp 00:01: [dma 4]
    [ 0.408839] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.408852] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.408908] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.408937] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.409005] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 0.409006] system 00:05: [io 0xffff] has been reserved
    [ 0.409007] system 00:05: [io 0xffff] has been reserved
    [ 0.409008] system 00:05: [io 0xffff] has been reserved
    [ 0.409010] system 00:05: [io 0x1c00-0x1cfe] has been reserved
    [ 0.409011] system 00:05: [io 0x1d00-0x1dfe] has been reserved
    [ 0.409012] system 00:05: [io 0x1e00-0x1efe] has been reserved
    [ 0.409013] system 00:05: [io 0x1f00-0x1ffe] has been reserved
    [ 0.409015] system 00:05: [io 0x1800-0x18fe] could not be reserved
    [ 0.409016] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 0.409017] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.409033] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.409058] system 00:07: [io 0x1854-0x1857] has been reserved
    [ 0.409060] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.409121] system 00:08: [io 0x0680-0x068f] has been reserved
    [ 0.409122] system 00:08: [io 0x0c10-0x0c1f] has been reserved
    [ 0.409123] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.409150] system 00:09: [io 0x04d0-0x04d1] has been reserved
    [ 0.409152] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.409182] pnp 00:0a: Plug and Play ACPI device, IDs ETD0301 PNP0f13 SYN1500 SYN0002 (active)
    [ 0.409206] pnp 00:0b: Plug and Play ACPI device, IDs MSI0001 PNP030b (active)
    [ 0.412551] pnp 00:0c: Plug and Play ACPI device, IDs ENE0110 (active)
    [ 0.416130] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.416131] system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.416132] system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.416133] system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.416135] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.416136] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.416137] system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.416138] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.416139] system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.416140] system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.416142] system 00:0d: [mem 0xf7fef000-0xf7feffff] has been reserved
    [ 0.416143] system 00:0d: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
    [ 0.416144] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.416328] pnp: PnP ACPI: found 14 devices
    [ 0.416329] ACPI: bus type PNP unregistered
    [ 0.422174] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 0.422176] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.422177] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
    [ 0.422195] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.422196] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.422197] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.422200] pci 0000:00:1c.0: BAR 14: assigned [mem 0xaf200000-0xaf3fffff]
    [ 0.422202] pci 0000:00:1c.0: BAR 15: assigned [mem 0xaf400000-0xaf5fffff 64bit pref]
    [ 0.422203] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 0.422205] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.422206] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.422208] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.422210] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.422213] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.422215] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.422219] pci 0000:00:1c.0: bridge window [mem 0xaf200000-0xaf3fffff]
    [ 0.422222] pci 0000:00:1c.0: bridge window [mem 0xaf400000-0xaf5fffff 64bit pref]
    [ 0.422227] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.422231] pci 0000:00:1c.2: bridge window [mem 0xf7a00000-0xf7afffff]
    [ 0.422238] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.422240] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [ 0.422244] pci 0000:00:1c.3: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.422251] pci 0000:00:1c.5: PCI bridge to [bus 05]
    [ 0.422253] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.422257] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.422264] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.422265] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.422266] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.422267] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.422268] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.422269] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.422270] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 0.422271] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 0.422272] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 0.422273] pci_bus 0000:00: resource 13 [mem 0xaf200000-0xfeafffff]
    [ 0.422274] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.422275] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
    [ 0.422276] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.422277] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.422278] pci_bus 0000:02: resource 1 [mem 0

    If I understand this correctly, then you have an Optimus graphics card (couldn't find anything online, but your lspci looks like it). I too have such a setup on my laptop. The thing to keep in mind here, is that your main graphics card is the Intel integrated card. So instead of installing your system like with an nvidia card, you install it like an intel card. Specifically, you would want to follow the instructions on Bumblebee. Once you followed them, the whole graphics part runs on the Intel card. Once you want to play a game or do some other heavy graphics card work you call your application like this:
    optirun wine /path/to/game.exe
    Notice how optirun tells the system to use the nvidia card. It will take a second or two to start it (specifically, enable the card, start another X screen and launch the application on it transparently). Follow the instructions in the Wiki if you have any problems.
    If you don't have an Optimus card (just NVIDIA, no Intel), then don't follow any Optimus instructions, just usual NVIDIA stuff from the Wiki.

  • MSI GE70 2OE-029 HDD rpm?

    Hi! Since Slovakia nor Czech Republic doesn't have their own forums or contact mail/phone number directly to MSI, I've decided to ask you people!
    I am thinking of buying MSI GE70 2OE-029. I want to make sure that everything (what is listed to have - technical specs) will be the same when I get it. Such things as procesor, graphic card or back light keyboard don't change depending on country. But HDD size and RPM does (mainly to worse aka smaller and slower - bad personal experience).
    So my question is... what HDD (size, RPM) does MSI put in this notebook in Slovakia or Czech Republic?
    Thank you for answers.

    Quote from: Baboe on 18-August-13, 00:08:16
    Hmm, these are very disconcerning news. I'm planning to check all things when it arrives, just in case.
    Thank you for your warning. What else should I be aware of? How can I check if "warranty seal" is still there - how does it look like?
    Small white sticker on the bottom of the laptop. I wouldn't be too concerned with it just because even if it's broken, MSI will still repair it as long as it's not something you did to the laptop (ie opened it up and broke the stick of ram in half or something).

  • MSI Ge70 0nd-224Fr request old Bios

    Hi all,
    I have a problem with my MSI Ge70 0nd-224Fr Notebook.
    I have upgraded Bios from E1756IMS.511 to E1756IMS.514 and my graphic card GTX660M dosen't work correctly  .
    All was good with E1756IMS.511 Bios !
    So i want to rool back to E1756IMS.511 Bios.
    is anyone has this bios file because MSI website doesn't have link to old bios ?
    I will be very very happy is someone can help me.
    Best regards,

    Some games doesn't detect correctly Nvidia graphics card (I have try with 314.x  320.x nvidia driver [and with last beta 320.49] and i have selected game exe association with nvidia card but it was good with E1756IMS.511 but not with E1756IMS.513 and E1756IMS.514)
    example : i have bad shadows on mafia 2 bench (but with old bios it was good)
    and For example (my os is Windows 8) with Areo Glass mod from big muscle (it working with E1756IMS.511 bios but not with E1756IMS.513 and 514 ...)
    So for me, E1756IMS.511 is the best bios and the most "stable".
    I didn't want overclock my graphic card, i only want the most stable system (the last bios release has a very negative resut on my system  )
    I have read that the 514 Bios solved a bug with "incorrect detection nvidia graphic card frequency", so it was the only reason of why i have made an upgrade of my bios ...
    E1756IMS.514 Fixes:
    - Modify radio switch device only present in Windows 8.
    - Solve the problem of abnormal password window when first boot priority is IP4/IP6.
    - Solve the abnormal problem of resume from S4 after disable/enable Full Screen Logo Display.
    - Solve abnormal NVIDIA GPU frequency problem.
    So my result is with E1756IMS.514:
    - abnormal NVIDIA detection problem
    - Artefact on game
    Please, give me a link to original bios E1756IMS.511 and original EC.
    Thank you for advance for your help.

Maybe you are looking for