MSI GE70 Not detecting wireless?

MSI GE70 laptop Windows 8.1 64bit.
Whilst using the internet yesterday suddenly I disconnected. Now I can't detect any wireless connections. In the 'Turn wireless devices on or off' settings, under 'wireless devices', it says 'we couldn't find any wireless devices on this PC'. In 'Device manager' the only Network adapter showing is 'Killer e2200 Gigabit Ethernet Controller (NDIS 6.30). So currently am having to plug my laptop into my router. Any idea where my wifi capability has gone?
Sorry if this is the incorrect forum, but I've done numerous searches and can't find the solution anywhere on the internet.
Appreciate any help, thanks.
 

Quote from: Svet on 03-July-14, 00:08:23
Here is how to activate the WiFI:
1. Find the Settings icon on the desktop and click on it.
2. Enter the PC settings main page by clicking on Change PC settings.
3. Unfold the Airplane mode selections under Network.
4.  Make sure Airplane mode is set to OFF here.
5.  Turn the Wi-Fi or Bluetooth function on/ off by sliding the function switch bar.   
When Airplane mode is set to ON, the Wi-Fi and 
Bluetooth function will be disabled at once.
That's where I looked first, this is what I see;
Under 'connections' ; https://imageshack.com/i/n1ffuhj
Under 'airplane mode' ; https://imageshack.com/i/npgexaj

Similar Messages

  • Can not detect wireless card

    WRE54G / Win XP SR2
    My laptop and PDA can connect to the network wirelessly with no problems.
    Trying to connect my WRE54G to my network. On every attempt at AutoConfigure nothing happens. Have disabled router security and 'SPI Firewall' (whatever that is). Still nothing. Have disabled router security and 'SPI Firewall' (whatever that is), and McAfee Firewall. Still nothing. I have moved the WRE54G to within ~4 feet of the router and tried everything again. Still nothing.
    I have tried Setup but when I hit 'Next' I get the popup "Can not detect wireless card."
    Have tried a reset and have unplugged/replugged the WRE54G. FWIW, the WRE54G 'Link' light blinks blue once for about a second and turns a constant red. The 'Activity' light blinks blue twice quickly about every 5 seconds. Nothing on my PC shows any response.
    What is the wireless card that can't be found? The WRE54G?
    How do I resolve this?
    33#44

    this worked for me too.  Although I was never able to use the cisco install wizard successfully.  I am using WEP security on my access point.  I took the following steps.
    1.  From laptop, connect to network wirelessly with WEP security settings in place
    2.  From laptop, open browser, go to: 192.168.1.1, select wireless security, disable wireless security
    3.  From Range Extender, hold auto-configure button.  It took me multiple attempts (~5) and it connected so the 'Link' light changed from red to a consistent blue.
    4.  From laptop, disable security for the access point (via control panel, wireless network connection settings)
    5.  From laptop, connect to wireless access point (via control panel, wireless network connection settings).  test internet connection.  Internet should work.
    6.  From laptop, access range extender web utility.  open browser, got to 192.168.1.240, enable security, input desired WEP security settings/passphrase. 
    7.  From laptop, enable wireless security for the access point.  from browser, go to 192.168.1.1, select wireless security and enable it.  use the same settings from step 6 (from the range extender).
    8.  From laptop, update wireless adapter settings to connect using the same security settings (eg. passphrase) from step 6/7.
    range extender, access point and wireless adapter/laptop should all be connected.

  • Laptop is not detecting wireless router

    Thanks in advance for any assistance.
    Equipment:
    Gateway 450ROG
    Intel PRO Wireless LAN 2100 3B
    Linksys BEFW11S4 Wireless Router
    SSID is enabled
    Channel 1
    I bought the laptop used and I upgraded it to WinXP SP2 and now it is not detecting any wireless nteworks.  There doesn't appear to be an exteranl switch for the radio on the laptop. All drivers have been upgraded to their latest version.  I was able to do this via a wired connection.
    Help.  Thanks.
    Darrell-

    Right Click on Intel Utility on the Tool-bar Try .... click use windows to configure the wireless settings ....
    Go to start >> run >> type "services.msc" (without quotes) >> Under that list ... look for Wireless Zero Configuration >> Go to properties >> Use Start up type as Automatic .>> Click Apply & OK ....
    Go to wireless network connections .... under view available wireless networks .... see if you are able to get your home network or not ...
    Try to connect to it ....

  • Satellite 5200-903 does not detect Wireless Adapter

    hello everybody,
    I wonder if anyone can tip me on this one...
    Since I reinstalled the OS ( have XP pro SP2 ) PC seems not detecting anymore the WIRELESS adapter in Device manager under Network Adapter.
    Also the light of the wireless switcher does not turn on anymore.
    I am also having problems to access the BIOS to check if the adapter is detected there, I do not have a Toshiba HW setup in Control Panel as indicated in the manual.
    Any suggestions?

    Hello Juliana
    The question is how did you install the OS? If you use recovery CD all tools will be installed including Toshiba HW setup. If the unit is preinstalled with Microsoft WXP CD you must install all Toshiba stuff belatedly.
    Just short explanation about WLAN card. Basically if the light of the wireless switcher does not turn on thats clearly indicate onto hardware problem. I assume that the WLAN card is defective. Check also if the card is listed in device manager.
    If you want to enter BIOS settings pres ESC button at the boot up procedure and keep it down for a few seconds.
    Bye

  • MSI mobo not detecting HDD

    Please help,
    My newly installed MSI 6383 Socket 370 Mobo is not detecting HDD.  Actually, it detects it but is not booting to WinXP.  It hangs up while verifying VMI data pool?
    Any Suggestions.
    I had to replace mobo due to lightning strike which zapped psu and mobo, i think.  
    Thanks

    Yes it was in zapped pc.  We have an identical HP in another office so i I took this drive out and put it in identical one and it works fine.  It is jumpered as the master and connected that way.    Seems like it is a compatability problem between motherboard and HDD, but I don't know.  Both the floppy and the cdrw work fine.  Thanks for the help.

  • MSI GE70 2OE-201TR Wireless issue

    Hi friends , I have a problem with my Msi ge70 2OE-201TR . My wifi connection drops randomly. then at right bottom , there is ! on wifi connection symbol. I can reconnect internet if I disconnect from network and reconnect. Are there any solve for this problem ?
    the solves that i tried :
    1-)Updated wifi  drivers
    2-)Disable killer network system or enable and update killer network
    3-)changed my router settings
    3-)updated bios
    4-)tried manual Ipv4 setup
    System Information
    Time of this report: 11/12/2014, 14:55:15
           Machine name: Tolga
       Operating System: Windows 8.1 Single Language 64-bit (6.3, Build 9600) (9600.winblue_r3.140827-1500)
               Language: Turkish (Regional Setting: Turkish)
    System Manufacturer: Micro-Star International Co., Ltd.
           System Model: GE70 2OC\2OD\2OE
                   BIOS: E1757IMS.51E
              Processor: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz (8 CPUs), ~2.4GHz
                 Memory: 16384MB RAM
    Available OS Memory: 16304MB RAM
              Page File: 2642MB used, 30045MB available
            Windows Dir: C:\Windows
        DirectX Version: DirectX 11
    DX Setup Parameters: Not found
       User DPI Setting: Using System DPI
     System DPI Setting: 96 DPI (100 percent)
        DWM DPI Scaling: Disabled
         DxDiag Version: 6.03.9600.16384 64bit Unicode

    Quote from: DragonSlayer;114769
    Help please
    The Killer network stuff isn't part of the Wifi. I have a 2OE mine is a realtek pci-e card. It's located under the bottom cover toward the side the lan cable plugs into. (if you decide to upgade it to a AC capable card) Try updaing those drivers. Right click the start button on the desktop, hit device manager, expand network adapters, the wifi card will be listed there. The drivers are on the MSI site where your laptop version is under support downloads. First try right clicking the wifi icon when it's hooked up. Hit open network/sharing, left click the wifi network, at the bottom hit proerties, at the top hit configure, the last tab is power uncheck let puter turn off to save power.

  • My apple tv does not detect wireless router sitting next to it

    I have my Apple TV sitting just few feet away from my router.  It does not detect my router.  So I added the IP addresses manually.  Under Apple TV Network settings, it still says Ethernet.  What can I do to get AppleTV to detect my Wireless rouer?

    Did you unplug the ethernet from AppleTv not just the router? I've found even a non-terminated cable plugged in disables wifi.
    Daft as it sounds, sometimes if the router is too close it can cause communication issues over wifi.
    If ethernet was working, why change to wifi?
    Can you confirm ethernet does still work and that AppleTV is not just 'stuck' in ethernet mode.
    Unplugging was a good test as that often corrects issues.
    It is possible your AppleTV software is somehow corrupted - restore via itunes using microUSB to eliminate that possibility, or that AppleTV hardware has failed and is 'stuck' thinking ethernet is connected.
    AC

  • X200 not detecting wireless networks

    Hello, 
    I have a ThinkPad X200 running windows XP, with an Intel Wifi Link 5100 AGN network card.
    It used to be working great, but about 3 weeks ago it stopped detecting wireless networks. 
    Since then it states: "No wireless networks were found in range."
    There are wireless networks around, this has been confirmed by using other computers. In fact, the laptop used to connect just fine. Just seemed to go out one day.
    The driver appears to be the newest one, (1/22/2012). 
    And looking in the support, the "allow the computer to turn of this device to save power" button is unchecked.
    It has been repaired and uninstalled. And seems to think the device is working properly.
    The only thing i think is that the receiver on the card is broken somehow and needs to be replaced.
    Any ideas would be very much appreciated! Thanks!

    Try resetting the SMC and PRAM
    MacBook Pro 
    Laptops with a battery you can remove 
    Shut down the computer.
    Disconnect the MagSafe power adapter from the computer, if it's connected.
    Remove the battery.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Reconnect the battery and MagSafe power adapter.
    Press the power button to turn on the computer.
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • C440 Not detecting Wireless Driver

    Hi so i got my C440 Lately and i uninstalled windows 8 and replaced it with windows 7 ultimate. So then i tried to download the Athorus SWAP Wifi Driver but its not detecting it although the driver has its own folder in C:/Drivers/Athorus SWAP Wifi Driver

    hi qazwsxedc,
    Thanks for Posting!
    Can you try getting the Hardware ID of your WLAN under Device Manager. it may show the Device name or Network controller.
    Let us know your findings
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • I start to install the vpn client. Now I do not detect wireless networks, I have no internet.

    Hello, I download the vpn client,I start to intall,  I no longer detects wireless networks.  Help.

    first download a toolbar ex.toogle,my web search . if u r already having any toolbar ,just go to toolbar menu and then right cilck on that toolbar and then clickon menu bar .

  • MacBook pro does not detected wireless network?????

    Hi! I have an airport express that provides the wireless network for the house. My iMac and iBook as well as iphone have no problem detecting the network. But the network does not show up in the drop down list that shows up when I turn the airport on. When I click on "other" and type in the information that way, the connection times out.
    Any suggestions would be appreciated!
    Thx!

    I have a similar problem. When I set the network to not be closed, My MacBook Pro finds and connects when I return from being away. When I set the network to be "closed", it will not connect automatically (I have checked "Remember and network this computer has joined" & "Remember this Network ") it will not join automatically. However, when I enter the name and password, it connects and all is well. My iPhone will automatically connect regardless of the "closed" being checked or not. Any suggestions? I would prefer to retain the "closed" setting for extra security.
    Thanks,
    Bruce

  • WRTS4G, computers not detecting wireless router

    On my main desktop I can connect to the internet (obviously), but when I try to detect the wireless router it doesn't detect it and my laptop won't connect either.  Up until yesterday I've been connected with no problems at all.
    I've reset the system, I've changed my pass phrase, I've unplugged, made sure cables are in, the only thing I haven't done is beat my wireless router with a hammer and I'm close.
    It picks up a signal when I am looking for wireless and I connect with "limited connectivity".
    Any insight would be appreciated!
    Thanks!
    Message Edited by AprilMayRD on 08-08-2008 07:05 AM

    It supposedly works and has no updates.  I bought a new wireless router today, a Linksys WRT31ON, still the same exact problem. 
    The main desktop has internet somehow, but the other computers can only have a limited connectivity.  I'm shelling out money for Geek Squad to come on Monday.  Does Linksys not have 1-800 numbers????????

  • Airport does not detect wireless network; it says problem = [network]"connection timeout"

    It is not a problem of signal strength, and my Airport detects other networks. It used to detect the network I want to connect to, for two years. It suddenly stopped detecting the network (which is WPA Personal password-protected). When I select choose other network and type in the password, it won't connect to it claiming "connection timeout."
    This happened before. Then after several days, Airport was able to detect and connect to the network I want. Now it again won't detect the network, and this seems permanent short of taking measures to address the problem. Should I try connecting manually to the network, and hodo I got about that? Thank you to anyone out there ho might be able to help.

    i have a macmini (OS 10.5) and use a belkin wireless router. When I turn on Mac address filtering on the router I have an Intermittent problem. The airport does not recognize the wireless network. On the network preferences panel there is a message that the airport is using a self assigned IP address. sometimes the message says the airport has no IP address. If I turn off the Mac address filtering and use a WAP password only the network is recognised and connects without a problem. How do I resolve this? I dont have the problem with a iBook using system 10.4. Is turning off the Mac address filtering secur?

  • MSI N670GTX not detected....

    Hi, this time I'm requesting a little help with the graphics card... Windows does not recognize it!
    Device manager only showed once Unknown Device under Device Manager
    NVIDIA Drivers install: Installer cannot continue
    My MB is Z68A-GD65 G3 (with an I7 so only BIOS 23.7)
    MB S/N is : 601-7681-240B1108243167
    Graphics card: 912-V284-002 N670GTX-PM2D2GD5/OC S/N:602-V284-20SB1211147602
    Thanks in advance

    flash your mobo BIOS to .N88 https://forum-en.msi.com/index.php?topic=163866.msg1181578#msg1181578
    then retest,
    Quote
    Graphics card works ok in another cpu
    what you mean by another CPU, you mean PC?
    can you save and upload his current vbios when the card is detected there?

  • New T500 does not detect Wireless

    I have out of the box T500, windows vista business. On openining i ran windows update. Then i tried to configure my wireless, but fn+f5 gives on/off option only for bluetooth. (wireless radio is not shown there). I've tried lenovo system update - no luck. BIOS wifi configuration is set ON. Help, dont know what to do.

    solved. bios security was still disabled, after that wifi driver update fixed the problem.

Maybe you are looking for

  • Error installing Adobe XI Pro Trial

    Hi. I keep getting this error while trying to install Adobe XI Pro trial version: The application cannot be installed due to a certificate problem.  The certificate does not match the installed application certificate, does not support application up

  • Album viewing on TV

    Is there any way to view "Album Pages" or "Photo Album" in a format that is compatble for viewing on a TV after being burned to a DVD? 

  • Freight condition getting multiplied with the quantity

    Dear Gurus, I have configured freight  condition, ZHD0, copied from HD00. When I am putting Rs 1000 in header, if i have 10 quantities, it is getting multipled with 10 and getting the total as 10000. I want it to be 1000 only and not get multipled wi

  • Silence detection using Cisco Wave Drivers

    We are trying to use silence detection on CTI port terminated calls with TAPI and Cisco Wave Drivers. LineMonitorDigits works but LineMonitorTones does not work for Silence with all frequencies set to ZERO. Thanks, Mario

  • The Hatter - I need help (in a hurry)

    The Hatter: you were a big help suggesting DiskWarrior for my problem with the G5 not starting. The disk showed up via UPS today. The Mac started from DiskWarrior, but the directory cannot be replaced because of intense errors (I'm not at the office