MSI GE70 Power jack trouble

Hello all,
I have a MSI GE70 laptop. The power jack has become loose and has trruble connecting. I took it apart and saw that the connecting cable was frayed at the soldering point and thus causing the problem. However, I'm having a hard time finding a replacement DC cable to replace the whole thing with in Canada. I looked online and all of them are in the states really. Is it possible to use another cable from another MSI laptop? And if so, which one(s)? What are my options here? Thanks.

Is it the plug from the AC adapter or the jack on the laptop?
If it's the AC adapter part, I'd just buy another AC adapter, just to be on the safe side.
If it's the jack on the laptop.....well...I'd probably buy another motherboard.
Just my 2cents. You can probably find both on ebay if you look.

Similar Messages

  • MSI GE70 Power Button LED is Solid Orange

    Hello,
    My MSI GE70 power button LED is glowing solid orange as of an hour right now, is this normal?

    Quote from: Satanlygun on 26-July-14, 22:01:07
    It does this every few seconds and it just worries me a lil. Just hoping it's nothing serious. I haven't noticed anything wrong software wise but, could it be telling me something is wrong internally hardware wise?
    Thanks
    Do you have MSI Afterburner, GPU-Z, AIDA64, or any other programs that MIGHT check the GPU's on your notebook? If so, close them. See if it continues happening.
    You can also enable the "Display GPU Activity Icon in the Notification Panel" in your NVidia control panels -> Desktop -> Add a checkmark next to "Display GPU Activity Icon in the Notification Panel"
    This will add a small box down in your notification panel (by your clock) and you can mouse over it to find out what program is causing your GPU to get enabled. This can help debug the problem as well.

  • MSI GT680 DC Power Jack burnt out

    soooo basically i was havin problem with the laptop struggling to recognize when the charger was plugged in and i had to adjust it into position and make sure it didnt move for it to charge...then a few weeks back i smelt something burning and smoke came out of the fan area (which meant the dc jack had burnt out)...so i ordered a new dc power jack from USA and opened the laptop up and can i say its really poor arrangement of components by MSI cos i had to take out nearly everything to get access to the jack which was stuck to the motherboard, it should really have its own wiring and seperate area if it can be burnt like this (like my dads acer does, his dc jack burnt out too but it was completely separate wiring for it so it took him 15mins to sort it out)
    aaanyways i did eventually get to the dc jack and tried to desolder it from the motherboard and it took me ages, maybe because of the solder used on the jack or maybe cos the soldering iron i had wasnt hot enough, either way i finally got it off and soldered the new jack into place and put everything back together and crossed my fingers before plugging the charger back in but there was a little spark so i took it out immediately, the circuit must have shorted somewhere or some of the components must have burnt out intially
    now i've got a dilemma in what to do...i live in the UK so parts are hard to come by and i dont think im under warranty cos i've had the laptop for more then 2 years so any suggestion how i can proceed
    P.S another guy had a similar problem which can be seen in the post below but no solution was posted at the end of it
    https://forum-en.msi.com/index.php?topic=169720.0
    thanks in advance

    Quote from: darkhawk on 08-August-13, 09:40:42
    I'll be perfectly honest with you.
    Replace the motherboard.
    Why? More than likely a FEW components have probably been damaged, most likely that you can't see. There might even be shorted traces inside the board at this point, or missing traces. So if you try to fix it, more than likely it will go up in smoke again, and possibly even worse this time.
    any idea where i can get a motherboard for MSI GT680 (preferably in uk somewhere)

  • MSI Ge70 Getting No Power Through Power Adapter Consistantly

    My 1 and a half year old MSI Ge70 recently starting having power problems, a week ago my current power adapter appeared to stop working, as I could get not charge the battery. I made sure it wasn't just the power outlet by plugging it into multiple different other outlets around my house. I ordered a new one (bottom image, since I am apparently not allowed to post links), which not only was supposed to be for GE70s, but it also appeared to have the same amperage and output. I got it in the mail and plugged it in, and it worked for about 5 ish hours (which is a lot longer than my battery life, I should add, as well as the fact the battery was completely drained). And then it just... turned off, I wasn't paying attention to it at the time, but I turned around and it was off, and would not start again. Four hours later, the battery charge light went back on, and it turned on again. I'm seeing sporadic power input getting to the battery/computer from both power adapters, sometimes it charges, sometimes it doesn't, but it may be the LAPTOP's charging port, I'm not entirely certain how to tell (I do know that my NEW power adapter is constantly on, because it has a power indication light). Any help would be appreciated.

    At this point, it's pretty much assured that there's something wrong with the laptop.
    I would get in contact with MSI and get an RMA.
    >>How to contact MSI.<<

  • MSI GE70 Apache Pro unboxing

    Here we have the awesome MSI GE70 Apache Pro (GE70 2PE-051UK) for our unboxing! As you can see it has all the trademark MSI logo, slogan and some of the other world class brands which feature on this notebook such as the Killer network who provide the fastest possible network speeds for lightening quick connection when gaming! The sound is by Danish specialists Dynaudio for unbeatable clarity. Dynaudio is only used on the best quality products, they also provide there sound systems to top cars such as Bugatti; showing they provide only top quality sound. The keyboard is by Steelseries; pioneers in the gaming peripheral department. They provide the top quality keyboard produced for the ease of use for gamers therefore improving you’re gaming skills! On the side of the box is the model and spec of the notebook inside.
    First thing you see when the box is open is the power lead and unit, as shown the power unit is very thin and light; like the notebook itself so therefore great for portability!
    Also we have the sleeve with a driver CD, warranty booklet/form, quick start guide, hot key F3 recovery function booklet, CE Compliance booklet and finally a competition entry to win a free notebook!
    Now for the main event; the notebook itself! Inside the box we have supports to hold the notebook to make sure it’s safe when being delivered. Once it’s out of the box we have the notebook in a protective sleeve and under this is the screen sleeve to protect further! Here is the GE70 out of the protective sleeves, the lid of the notebook is brushed aluminium and has simple and effective MSI branding; the dragon in Asian legends means the king of the world, this represents MSI commitment to provide only the highest standard of gaming notebooks to gamers worldwide. As well as this, the dragon on the logo is backlit and adds to the already awesome look of the notebook.
    On the front of the notebook there are the LED indicator’s, we have the disc indicator, Bluetooth, WLAN, battery, caps lock, num lock and finally the sleep.
    On the left side of the notebook we have an SD card slot, gold flash headphone jacks with MSI audio boost which enhances sound clarity and fidelity by 30%; just another feature which can make your gaming and multimedia experience much better! There are 2 USB 3.0 slots, HDMI port, ventilation, power plug and the security lock.
    On the right side of the notebook we have the gigabyte Ethernet port, VGA port, high power USB 2.0 for when you need to charge your mobile fast (or any other device), BD Combo / DVD Super multi and another USB 2.0!
    Here’s the back of the laptop, as you can see it has a sleek design like the rest of the notebook.
    The screen itself is a 17.3” Full HD (1920x1080) anti-glare LCD panel in LED backlight, the anti-glare itself is very use full for gaming and other tasks as you can use the notebook in any conditions and still have maximum use at all time!
    Here we have the full keyboard layout by Steelseries, it features a fully backlit keyboard with over 1000 different colour combinations and five different scenario modes for the keyboard! So weather you’re at home gaming in the dark or at a LAN party, you can have the coolest looking keyboard with high visibility for every key; enabling you to maximize your gaming skills in every situation. This keyboard also supports multi keys; therefore allowing users to rapidly respond to games with precision and issue commands rapidly. You can learn more about the Steelseries keyboard and engine here:
    Featured on the steel series keyboard is a change to the usual keyboard layout, the left Ctrl button has been made larger than usual as it is an important key for gamers and is now more accessible when gaming.
    The windows button on this keyboard has also moved from the left of the keyboard to the right side, this has been done in favour of gamers so the button doesn’t get in the way when you are gaming. All these little details maximize your gaming experience way more than your normal keyboard!
    On the GE70 we have world class sound provided by Danish sound specialists Dynaudio! The notebook has speakers located above the keyboard and also has 2 other speakers on the underside of the notebook closest to the front. The speakers support 7.1 channel SPDIF output, features exclusive audio boost technology which enhances sound clarity and fidelity by 30%! All together increasing the gaming and multimedia experience with the great sound provided. You can learn more about the Dynaudio sound here:
    [video=youtube;tE8FBiuGsBo]
    The back of the notebook has 5 rubber studs to keep the notebook secure when stationary; therefore no movement when using the notebook. The battery is a 6-Cell Li-Ion, there are several ventilation spots to keep the notebook running cool at all time.
    Here is the spec of the notebook
    Operating System   Windows 8.1
    Processor / chipset
    CPU   Intel Core i7 (4th Gen) 4700HQ / 2.4 GHz
    Max Turbo Speed   3.4 GHz
    Number of Cores   Quad-Core
    64-bit Computing   Yes
    Chipset   Mobile Intel HM87 Express
    Features   Intel Turbo Boost Technology 2.0
    Memory
    RAM   16 GB ( 2 x 8 GB )
    Technology   DDR3L SDRAM
    Storage
    Hard Drive   256 GB SSD - MSI Super RAID
    SSD Form Factor   mSATA
    Hard Drive (2nd)   1 TB HDD / 7200 rpm - Serial ATA-600
    Optical Drive   DVD±RW (±R DL) / DVD-RAM
    Display
    Type   17.3"
    LCD Backlight Technology   LED backlight
    Resolution   1920 x 1080 ( Full HD )
    Widescreen   Yes
    Image Aspect Ratio   16:9
    Features   Anti-glare, MSI Matrix Display
    Audio & video
    Graphics Processor   NVIDIA GeForce GTX 860M - 2 GB GDDR5 SDRAM
    Camera   Integrated webcam
    Capture Resolutions   1280 x 720
    Sound   Speakers, subwoofer , microphone
    Audio Features   Dynaudio Premium Sound Technology, MSI Audio Boost
    Input
    Type   Touchpad, backlit keyboard
    Communications
    Wireless   802.11n, Bluetooth 4.0
    Network Interface   Gigabit Ethernet
    Ethernet Controller   Killer E2200 Intelligent Networking
    Battery
    Technology   6-cell Lithium Ion
    Capacity   49 Wh
    Run Time   Up to 4 hours
    Ac adapter
    Output   120 Watt
    Connections & expansion
    Interfaces   2 x USB 2.0 ¦ 2 x USB 3.0 ¦ LAN ¦ VGA ¦ HDMI ¦ Headphone output ¦ Microphone input
    Memory Card Reader   Yes ( SD Card, SDHC Card, SDXC Card )
    Miscellaneous
    Features   Cooler Boost technology, SteelSeries gaming keyboard
    Dimensions & weight
    Width   41.8 cm
    Depth   26.9 cm
    Height   3.9 cm
    Weight   3 kg
    This is the MSI boot configure, it’s the first software that opens on start of your MSI notebook. It’s a thoughtful program which is designed to let you choose how you want your notebook to boot up, the 2 screenshots show the options available; you can choose between the windows 8.1 metro or the normal desktop screen on log in. As well you have the option to choose whether the start button goes to the start screen or the app screen. This simple program allows you to customize your notebook to your needs!
    The GE70 has a Killer E2200 Intelligent networking LAN chip. It automatically detects and accelerates game traffic for smoother, faster gameplay by recognizing and prioritising online game data packs. Therefore in any game you’re playing weather a FPS or MMO you will always have the fastest response time possible in every situation! You can also manually decide the priority of each application to maximize network performance on the programs you need the most! You can see more on the killer network on our youtube -
    [video=youtube;bc4Y4VxOA-g]
    Now to test the system with the latest high demand games! We tested the system with crysis 3, metro last light, assassin's creed IV and battlefield 4. All these games require very high spec systems and are great for testing; we tested them on max settings and also on Nvidia’s optimized settings for each game. Nvidia has made it easy to optimize the settings to get the best performance possible out of the notebook with the GeForce experience! You can auto-optimize game settings for best performance and tweak them if you want better graphics or better frame rate.
    The result are as follows:
    Crysis 3 maxed out ran at an average of 20-30 FPS and with Nvidia’s optimized settings it ran at an average of 55-65 FPS.
    Metro last light maxed out ran at an average of 30-40 FPS and with Nvidia’s optimized settings it ran at an average of 50-60 FPS.
    Assassin’s creed IV maxed out ran at an average of 30-40 FPS and with Nvidias optimized settings it ran at an average of 35-45 FPS.
    Battlefield 4 maxed out ran at an average of 35-45 FPS and with Nvidia’s optimized settings it ran at an average of 50-60 FPS.
    All round great results from some of the highest demanding games on the market, it shows that the GE70 is capable of keeping up with your gaming needs while still being a portable, slim and light notebook.

    It is extra ventilation for cooling! Quote from: RepoSnow;104046
    I actually just bought one of these- 012 US model and it hasnt got here yet but do you know what these two rows of dots are on the back? (Picture #15) http://i60.tinypic.com/34h9xfb.jpg

  • MSI GE70 2OE-029CZ Start-up problems, please help

    Hello guys. My name is Mike and I need some help from you. Half year back I bought notebook MSI GE70 2OE-029CZ from Czech Republic and it wont boot up now. I used this notebook normally without problems until now. Four days back I finished my work and turned notebook off. Next day, after I came back home, I turned notebook on and suddenly it turned off after 4 seconds. It showed only MSI logo, I did not get in to bootloader. Then I turned it on again and same thing happened again. Except it was running only 1-2 seconds. After this notebook did not start up again. I have checked power supply with voltmeter and got suitable voltage. I did let the battery to discharge little over night and in the morning I tried to put it on charger. The battery diode lighted up. But still could not start it up. I already filled out MSI Service webform yesterday, but still did not get any response. Im just posting it here if someone of you has some idea i could try. Also does anyone got any idea why are mine audio jacks not golden? They are just black. I supposed they had to be golden plated. Sorry for my bad grammar, I am not born English speaker . Thank you for you help and time.

    Hello,
    I am sorry you experience this problem and probably I would be frustrated if such a thing would happen to me.
    Sorry if I dis-read something, but have you tried turning the laptop ON without the battery just with charger? And other way around (with FULL battery but no charger)?
    About HDD: you can take it out, but would be BEST if you make backup somewhere once you take it out and send it TOGETHER with the laptop, as the problem might be somewhere with the wires.

  • Say Goodbye to my old desktop! Got my new high mobility and performance MSI GE70 2PC Apache!

    Time to get rid of my old PC, which is barely can run latest games. So, after I made some researches online, I decided to buy MSI GE60 2PC Apache. It perfectly matches my budget.
    The box inside comes with black design. The notebook is protected by a black sleeve.
    The packing includes a power adapter, MSI branded gaming mouse, a battery, CD, and manuals. I especially like the adaptor design in slim and compact size.
    The metal brush front cover looks gorgeous. I like the red dragon badge with backlight enabled. This is one of my favorites in this notebook. I believe it will make my new notebook stand out from the other Apxle notebooks when I use it in my campus. “The fruit” is not the only shining star anymore. 
    There is a red line on the side~~
    Here comes my new notebook. Btw, the packing also comes with a MSI bag.
    The labels says it features with Matrix Display (extend to 3 external monitors), Killer lan (network for gaming applications), Steelseries keyboard, and Audio Boost.
    The touch pad is in one piece. Again, metal brush!!
    Intel i7 and NVIDIA GTX 850M inside of my new baby. 
    Audio system is powered by DYNAUDIO. As I checked online, this is a Danish brand and seems to be very famous. 
    Steelseries keyboard~ I think I don’t need to mention what Steelseries is. All gamers should know it.
    I found one thing very special that the Windows key is moved to the right. According to MSI website, it is for games not to mis-touch the Windows key in gameplay. Very ergonomic design for gamers.
    It has an individual numerical key area. Good for my accounting courses.
    He he he… I used my Cannon digital camera for below full color backlight keyboard picture! I tried several shots. This one is the best one to show. Anyway, the point here is the color configurations can be customized!!
    720P webcam!
    On the left, you can find one HDMI, two USB3.0, golden audio jack with Audio Boost feature, and one combo memory card slot.
    On the right, you can find one RJ-45 with Killer lan feature, one VGA port, two USB2.0, and BD Combo drive.
    The panel can be opened up to roughly 135 degree. I think it is good enough. I am not going to use it as a tablet.  
    Sound by DYNAUDIO with 2.1 surround audio channel!
    The close-up of the shining dragon logo on the front cover.
    I find a secret feature.
    When the notebook is running by Intel integrated graphics, the power indicator shows blue. However, when it is running by NVIDIA graphics, the indicator shows red.
    Very good feature for me to know if the NV graphics is on when I play games.
    Signal Indicators show wireless, Bluetooth, hard disk, and power status.
    Okay, now it is the time to start the live demo.
    Oops…my friend is calling me….need to go out with my friend now. After I finish the basic settings, I will find time to make real gameplay demo and share with you later.

    Back again for my part 2 sharing.
    Here is my testing result of 3DMARK on my MSI GE60 2PC Apache.
    X7654
    Boot up time - SSD
    Sleeping dog - FPS
    Need for Speed – FPS average 60 FPS. (this game only supports max 60FPS)
    All settings are set to max
    Conclusion:
    The metal brush design on front and keyboard sides looks decent. I love its 17” FHD display which is good for playing games, watching videos, typing my reports in a comfortable way. After I got this, it is difficult for me to go back to smaller display.
    I expected that online streaming could cost a lot of system resource. However, its Gamecaster Xplit online streaming feature surprised me! No lag and very easy to use! Its quick boot-up time with SSD and GTX 850M gave me a whole new PC experience.
    The Haswell i7-4700HQ and NVIDIA GTX 850M are sufficient enough for games and online streaming. Not to mention it also carries Steelseries keyboard which is a Plus when I play games. I am glad that I decided to buy this GE70 2PC Apache to replace my old desktop because it can satisfy all my needs for gaming, multimedia, and document editing.  
    If you have the same demand as me and also looking for a notebook, it is worthy to give it a shot on MSI GE70 2PC Apache!!

  • NVIDIA Optimus on MSI GE70 2OE: No screens, then server fails to start

    Hello,
    I have recently acquired an MSI GE70 2OE-071 laptop with the following configuration, intending to run Arch Linux (dual boot with Windows 7) on it:
    CPU: Intel Core i7-4700 MQ
    GPU: Nvidia GeForce GTX 765M (2 GB DDR5 memory)
    LCD: 17.3" FHD 1920x1080
    Memory: 12 GB DDR3
    HDD: 1 TB 7200 RPM
    I originally installed Arch Linux the same way as described in the beginner's guide. I could get the basic twm setup to work, but the moment I installed the proprietary drivers (using pacman -S nvidia, followed by nvidia-xconfig, followed by a reboot), X Windows crashed, i.e. I started getting the No screens found error. So after some days of digging, I found the NVIDIA Optimus wiki page. Following the advice here, I could get rid of this error, but I still cannot get into the GUI, because the server terminates. There is no hardware problem that I can think of because Manjaro Linux works fine, and being a perpetual Arch novice eager to learn, I just wanted to get this thing to work from the ground up.
    So I'd really appreciate some help.
    Here are the relevant files and command outputs.
    uname -a. url = http://bpaste.net/show/166840/
    Linux gluon 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64 GNU/Linux
    .xinitrc. url = http://bpaste.net/show/166837/
    xrandr --setprovideroutputsource modesetting NVIDIA-0
    xrandr --auto
    /etc/X11/xorg.conf. url = http://bpaste.net/show/166838/
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 331.20 (buildmeister@swio-display-x86-rhel47-05) Wed Oct 30 18:20:53 PDT 2013
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BusID "PCI:1:0:0" # manually added
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    /var/log/Xorg.0.log. url = http://bpaste.net/show/166839/
    [ 1684.463]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 1684.465] X Protocol Version 11, Revision 0
    [ 1684.465] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 1684.466] Current Operating System: Linux gluon 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64
    [ 1684.466] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d2a5754c-c679-48b4-9b12-02ae94b83604 rw quiet
    [ 1684.467] Build Date: 06 January 2014 10:25:32PM
    [ 1684.467]
    [ 1684.468] Current version of pixman: 0.32.4
    [ 1684.469] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 1684.469] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 1684.472] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 11 07:17:09 2014
    [ 1684.472] (==) Using config file: "/etc/X11/xorg.conf"
    [ 1684.473] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 1684.473] (==) ServerLayout "Layout0"
    [ 1684.473] (**) |-->Screen "Screen0" (0)
    [ 1684.473] (**) | |-->Monitor "Monitor0"
    [ 1684.473] (**) | |-->Device "Device0"
    [ 1684.473] (**) |-->Input Device "Keyboard0"
    [ 1684.473] (**) |-->Input Device "Mouse0"
    [ 1684.473] (==) Automatically adding devices
    [ 1684.473] (==) Automatically enabling devices
    [ 1684.473] (==) Automatically adding GPU devices
    [ 1684.473] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 1684.473] Entry deleted from font path.
    [ 1684.473] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 1684.473] Entry deleted from font path.
    [ 1684.473] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 1684.473] Entry deleted from font path.
    [ 1684.473] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 1684.473] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 1684.473] Entry deleted from font path.
    [ 1684.473] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 1684.473] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 1684.473] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 1684.473] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 1684.473] (WW) Disabling Keyboard0
    [ 1684.473] (WW) Disabling Mouse0
    [ 1684.473] (II) Loader magic: 0x7fac20
    [ 1684.473] (II) Module ABI versions:
    [ 1684.473] X.Org ANSI C Emulation: 0.4
    [ 1684.473] X.Org Video Driver: 14.1
    [ 1684.473] X.Org XInput driver : 19.1
    [ 1684.473] X.Org Server Extension : 7.0
    [ 1684.473] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 1684.473] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 1684.474] (--) PCI:*(0:0:2:0) 8086:0416:1462:10e1 rev 6, Mem @ 0xf7400000/4194304, 0xb0000000/268435456, I/O @ 0x0000f000/64
    [ 1684.474] (--) PCI: (0:1:0:0) 10de:11e2:1462:10e1 rev 161, Mem @ 0xf6000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 1684.475] Initializing built-in extension Generic Event Extension
    [ 1684.476] Initializing built-in extension SHAPE
    [ 1684.476] Initializing built-in extension MIT-SHM
    [ 1684.477] Initializing built-in extension XInputExtension
    [ 1684.478] Initializing built-in extension XTEST
    [ 1684.478] Initializing built-in extension BIG-REQUESTS
    [ 1684.479] Initializing built-in extension SYNC
    [ 1684.479] Initializing built-in extension XKEYBOARD
    [ 1684.480] Initializing built-in extension XC-MISC
    [ 1684.481] Initializing built-in extension SECURITY
    [ 1684.481] Initializing built-in extension XINERAMA
    [ 1684.482] Initializing built-in extension XFIXES
    [ 1684.482] Initializing built-in extension RENDER
    [ 1684.483] Initializing built-in extension RANDR
    [ 1684.484] Initializing built-in extension COMPOSITE
    [ 1684.484] Initializing built-in extension DAMAGE
    [ 1684.485] Initializing built-in extension MIT-SCREEN-SAVER
    [ 1684.485] Initializing built-in extension DOUBLE-BUFFER
    [ 1684.486] Initializing built-in extension RECORD
    [ 1684.487] Initializing built-in extension DPMS
    [ 1684.487] Initializing built-in extension X-Resource
    [ 1684.488] Initializing built-in extension XVideo
    [ 1684.488] Initializing built-in extension XVideo-MotionCompensation
    [ 1684.489] Initializing built-in extension XFree86-VidModeExtension
    [ 1684.489] Initializing built-in extension XFree86-DGA
    [ 1684.490] Initializing built-in extension XFree86-DRI
    [ 1684.490] Initializing built-in extension DRI2
    [ 1684.490] (II) LoadModule: "glx"
    [ 1684.490] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 1684.490] (II) Module glx: vendor="X.Org Foundation"
    [ 1684.490] compiled for 1.14.5, module version = 1.0.0
    [ 1684.490] ABI class: X.Org Server Extension, version 7.0
    [ 1684.490] (==) AIGLX enabled
    [ 1684.491] Loading extension GLX
    [ 1684.491] (II) LoadModule: "nvidia"
    [ 1684.491] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 1684.491] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 1684.491] compiled for 4.0.2, module version = 1.0.0
    [ 1684.491] Module class: X.Org Video Driver
    [ 1684.491] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
    [ 1684.491] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 1684.491] (++) using VT number 1
    [ 1684.491] (II) Loading sub module "fb"
    [ 1684.491] (II) LoadModule: "fb"
    [ 1684.491] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1684.491] (II) Module fb: vendor="X.Org Foundation"
    [ 1684.491] compiled for 1.14.5, module version = 1.0.0
    [ 1684.491] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1684.491] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 1684.491] (II) Loading sub module "wfb"
    [ 1684.491] (II) LoadModule: "wfb"
    [ 1684.491] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 1684.491] (II) Module wfb: vendor="X.Org Foundation"
    [ 1684.491] compiled for 1.14.5, module version = 1.0.0
    [ 1684.491] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1684.491] (II) Loading sub module "ramdac"
    [ 1684.491] (II) LoadModule: "ramdac"
    [ 1684.491] (II) Module "ramdac" already built-in
    [ 1684.491] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 1684.491] (==) NVIDIA(0): RGB weight 888
    [ 1684.492] (==) NVIDIA(0): Default visual is TrueColor
    [ 1684.492] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 1684.492] (**) NVIDIA(0): Enabling 2D acceleration
    [ 1684.492] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
    [ 1684.492] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
    [ 1684.492] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
    [ 1684.492] (EE) NVIDIA(0): you continue to encounter problems, Please try
    [ 1684.492] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
    [ 1684.654] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 1684.655] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 765M (GK106) at PCI:1:0:0 (GPU-0)
    [ 1684.655] (--) NVIDIA(0): Memory: 2097152 kBytes
    [ 1684.655] (--) NVIDIA(0): VideoBIOS: 80.06.5d.00.09
    [ 1684.655] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 1684.655] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 765M at PCI:1:0:0
    [ 1684.655] (--) NVIDIA(0): none
    [ 1684.655] (II) NVIDIA(0): Validated MetaModes:
    [ 1684.655] (II) NVIDIA(0): "NULL"
    [ 1684.655] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
    [ 1684.655] (WW) NVIDIA(0): Unable to get display device for DPI computation.
    [ 1684.655] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [ 1684.655] (--) Depth 24 pixmap format is 32 bpp
    [ 1684.655] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 1684.655] (II) NVIDIA: access.
    [ 1684.661] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 1684.661] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 1684.661] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 1684.661] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 1684.661] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 1684.661] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 1684.661] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 1684.661] (II) NVIDIA(0): Config Options in the README.
    [ 1684.661] (II) NVIDIA(0): Setting mode "NULL"
    [ 1684.661] (EE) NVIDIA(0): Failed to initiate mode change.
    [ 1684.661] (EE) NVIDIA(0): Failed to complete mode change
    [ 1684.668] (II) NVIDIA(0): Built-in logo is bigger than the screen.
    [ 1684.668] Loading extension NV-GLX
    [ 1684.670] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 1684.670] (==) NVIDIA(0): Backing store disabled
    [ 1684.670] (==) NVIDIA(0): Silken mouse enabled
    [ 1684.670] (**) NVIDIA(0): DPMS enabled
    [ 1684.670] Loading extension NV-CONTROL
    [ 1684.670] (II) Loading sub module "dri2"
    [ 1684.670] (II) LoadModule: "dri2"
    [ 1684.670] (II) Module "dri2" already built-in
    [ 1684.670] (II) NVIDIA(0): [DRI2] Setup complete
    [ 1684.670] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 1684.670] (--) RandR disabled
    [ 1684.673] (II) AIGLX: Screen 0 is not DRI2 capable
    [ 1684.673] (II) AIGLX: Screen 0 is not DRI capable
    [ 1684.680] (II) AIGLX: Loaded and initialized swrast
    [ 1684.680] (II) GLX: Initialized DRISWRAST GL provider for screen 0
    [ 1684.697] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 1684.697] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1684.697] (II) LoadModule: "evdev"
    [ 1684.697] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 1684.697] (II) Module evdev: vendor="X.Org Foundation"
    [ 1684.697] compiled for 1.14.3, module version = 2.8.2
    [ 1684.697] Module class: X.Org XInput Driver
    [ 1684.697] ABI class: X.Org XInput driver, version 19.1
    [ 1684.697] (II) Using input driver 'evdev' for 'Power Button'
    [ 1684.697] (**) Power Button: always reports core events
    [ 1684.697] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 1684.697] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 1684.697] (--) evdev: Power Button: Found keys
    [ 1684.697] (II) evdev: Power Button: Configuring as keyboard
    [ 1684.697] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
    [ 1684.697] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 1684.697] (**) Option "xkb_rules" "evdev"
    [ 1684.697] (**) Option "xkb_model" "pc104"
    [ 1684.697] (**) Option "xkb_layout" "us"
    [ 1684.709] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
    [ 1684.709] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 1684.709] (II) Using input driver 'evdev' for 'Video Bus'
    [ 1684.709] (**) Video Bus: always reports core events
    [ 1684.709] (**) evdev: Video Bus: Device: "/dev/input/event12"
    [ 1684.709] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 1684.709] (--) evdev: Video Bus: Found keys
    [ 1684.709] (II) evdev: Video Bus: Configuring as keyboard
    [ 1684.709] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13/event12"
    [ 1684.709] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 1684.709] (**) Option "xkb_rules" "evdev"
    [ 1684.709] (**) Option "xkb_model" "pc104"
    [ 1684.709] (**) Option "xkb_layout" "us"
    [ 1684.709] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 1684.709] (II) No input driver specified, ignoring this device.
    [ 1684.709] (II) This device may have been added with another device file.
    [ 1684.709] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
    [ 1684.709] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 1684.709] (II) Using input driver 'evdev' for 'Video Bus'
    [ 1684.709] (**) Video Bus: always reports core events
    [ 1684.709] (**) evdev: Video Bus: Device: "/dev/input/event11"
    [ 1684.709] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 1684.709] (--) evdev: Video Bus: Found keys
    [ 1684.709] (II) evdev: Video Bus: Configuring as keyboard
    [ 1684.709] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:48/LNXVIDEO:00/input/input12/event11"
    [ 1684.709] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 1684.709] (**) Option "xkb_rules" "evdev"
    [ 1684.709] (**) Option "xkb_model" "pc104"
    [ 1684.709] (**) Option "xkb_layout" "us"
    [ 1684.710] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 1684.710] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1684.710] (II) Using input driver 'evdev' for 'Power Button'
    [ 1684.710] (**) Power Button: always reports core events
    [ 1684.710] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 1684.710] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 1684.710] (--) evdev: Power Button: Found keys
    [ 1684.710] (II) evdev: Power Button: Configuring as keyboard
    [ 1684.710] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event2"
    [ 1684.710] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
    [ 1684.710] (**) Option "xkb_rules" "evdev"
    [ 1684.710] (**) Option "xkb_model" "pc104"
    [ 1684.710] (**) Option "xkb_layout" "us"
    [ 1684.710] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 1684.710] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 1684.710] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event15)
    [ 1684.710] (II) No input driver specified, ignoring this device.
    [ 1684.710] (II) This device may have been added with another device file.
    [ 1684.710] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event14)
    [ 1684.710] (II) No input driver specified, ignoring this device.
    [ 1684.710] (II) This device may have been added with another device file.
    [ 1684.710] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=8 (/dev/input/event13)
    [ 1684.710] (II) No input driver specified, ignoring this device.
    [ 1684.710] (II) This device may have been added with another device file.
    [ 1684.710] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event9)
    [ 1684.710] (**) BisonCam, NB Pro: Applying InputClass "evdev keyboard catchall"
    [ 1684.710] (II) Using input driver 'evdev' for 'BisonCam, NB Pro'
    [ 1684.710] (**) BisonCam, NB Pro: always reports core events
    [ 1684.710] (**) evdev: BisonCam, NB Pro: Device: "/dev/input/event9"
    [ 1684.710] (--) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x14c
    [ 1684.710] (--) evdev: BisonCam, NB Pro: Found keys
    [ 1684.710] (II) evdev: BisonCam, NB Pro: Configuring as keyboard
    [ 1684.710] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input11/event9"
    [ 1684.710] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD, id 10)
    [ 1684.710] (**) Option "xkb_rules" "evdev"
    [ 1684.710] (**) Option "xkb_model" "pc104"
    [ 1684.710] (**) Option "xkb_layout" "us"
    [ 1684.711] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    [ 1684.711] (II) No input driver specified, ignoring this device.
    [ 1684.711] (II) This device may have been added with another device file.
    [ 1684.711] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
    [ 1684.711] (II) No input driver specified, ignoring this device.
    [ 1684.711] (II) This device may have been added with another device file.
    [ 1684.711] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
    [ 1684.711] (II) No input driver specified, ignoring this device.
    [ 1684.711] (II) This device may have been added with another device file.
    [ 1684.711] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 1684.711] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 1684.711] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 1684.711] (**) AT Translated Set 2 keyboard: always reports core events
    [ 1684.711] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 1684.711] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 1684.711] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 1684.711] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 1684.711] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 1684.711] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    [ 1684.711] (**) Option "xkb_rules" "evdev"
    [ 1684.711] (**) Option "xkb_model" "pc104"
    [ 1684.711] (**) Option "xkb_layout" "us"
    [ 1684.711] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
    [ 1684.711] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
    [ 1684.711] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
    [ 1684.711] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
    [ 1684.711] (II) LoadModule: "synaptics"
    [ 1684.711] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 1684.711] (II) Module synaptics: vendor="X.Org Foundation"
    [ 1684.711] compiled for 1.14.4, module version = 1.7.2
    [ 1684.711] Module class: X.Org XInput Driver
    [ 1684.711] ABI class: X.Org XInput driver, version 19.1
    [ 1684.711] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
    [ 1684.711] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 1684.711] (**) Option "Device" "/dev/input/event10"
    [ 1684.783] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 33)
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 33)
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
    [ 1684.783] (**) Option "TapButton1" "1"
    [ 1684.783] (**) Option "TapButton2" "2"
    [ 1684.783] (**) Option "TapButton3" "3"
    [ 1684.783] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 1684.783] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 1684.809] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event10"
    [ 1684.809] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
    [ 1684.810] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
    [ 1684.810] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
    [ 1684.810] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
    [ 1684.810] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
    [ 1684.810] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
    [ 1684.810] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
    [ 1684.810] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
    [ 1684.810] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 1684.810] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
    [ 1684.810] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 1684.810] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 1684.810] (II) No input driver specified, ignoring this device.
    [ 1684.810] (II) This device may have been added with another device file.
    [ 1684.810] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event5)
    [ 1684.810] (**) MSI WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 1684.810] (II) Using input driver 'evdev' for 'MSI WMI hotkeys'
    [ 1684.810] (**) MSI WMI hotkeys: always reports core events
    [ 1684.810] (**) evdev: MSI WMI hotkeys: Device: "/dev/input/event5"
    [ 1684.810] (--) evdev: MSI WMI hotkeys: Vendor 0 Product 0
    [ 1684.810] (--) evdev: MSI WMI hotkeys: Found keys
    [ 1684.810] (II) evdev: MSI WMI hotkeys: Configuring as keyboard
    [ 1684.810] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event5"
    [ 1684.810] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 13)
    [ 1684.810] (**) Option "xkb_rules" "evdev"
    [ 1684.810] (**) Option "xkb_model" "pc104"
    [ 1684.810] (**) Option "xkb_layout" "us"
    [ 1685.097] (II) evdev: MSI WMI hotkeys: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) UnloadModule: "synaptics"
    [ 1685.097] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) evdev: BisonCam, NB Pro: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) evdev: Power Button: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) evdev: Video Bus: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) evdev: Video Bus: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) evdev: Power Button: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.116] (II) NVIDIA(GPU-0): Deleting GPU-0
    [b][ 1685.120] (EE) Server terminated successfully (0). Closing log file.[/b]
    lspci. url = http://bpaste.net/show/166842/
    00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
    00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
    00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
    00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
    00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
    00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
    00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
    00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
    00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
    00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d5)
    00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
    00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
    00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
    00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
    01:00.0 3D controller: NVIDIA Corporation GK106M [GeForce GTX 765M] (rev a1)
    03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5227 (rev 01)
    04:00.0 Ethernet controller: Qualcomm Atheros Killer E2200 Gigabit Ethernet Controller (rev 13)
    05:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723AE PCIe Wireless Network Adapter
    dmesg. url: http://bpaste.net/show/166841/
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d2a5754c-c679-48b4-9b12-02ae94b83604 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b171fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b172000-0x000000009b178fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009b179000-0x000000009b8e8fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b8e9000-0x000000009bb55fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009bb56000-0x00000000ab48ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ab490000-0x00000000ab697fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ab698000-0x00000000ab78bfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ab78c000-0x00000000abb73fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000abb74000-0x00000000abffefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000abfff000-0x00000000abffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ad000000-0x00000000af1fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000034fdfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Micro-Star International Co., Ltd. GE70 2OC\2OE/MS-1757, BIOS E1757IMS.10E 07/15/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x34fe00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
    [ 0.000000] 1 base 0200000000 mask 7F00000000 write-back
    [ 0.000000] 2 base 0300000000 mask 7F80000000 write-back
    [ 0.000000] 3 base 00C0000000 mask 7FC0000000 uncachable
    [ 0.000000] 4 base 00B0000000 mask 7FF0000000 uncachable
    [ 0.000000] 5 base 00AE000000 mask 7FFE000000 uncachable
    [ 0.000000] 6 base 00AD000000 mask 7FFF000000 uncachable
    [ 0.000000] 7 base 0360000000 mask 7FE0000000 uncachable
    [ 0.000000] 8 base 0350000000 mask 7FF0000000 uncachable
    [ 0.000000] 9 base 034FE00000 mask 7FFFE00000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xad000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xac000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff8800000fd770]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x34fc00000-0x34fdfffff]
    [ 0.000000] [mem 0x34fc00000-0x34fdfffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x34c000000-0x34fbfffff]
    [ 0.000000] [mem 0x34c000000-0x34fbfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x300000000-0x34bffffff]
    [ 0.000000] [mem 0x300000000-0x33fffffff] page 1G
    [ 0.000000] [mem 0x340000000-0x34bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9b171fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0x9affffff] page 2M
    [ 0.000000] [mem 0x9b000000-0x9b171fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9b179000-0x9b8e8fff]
    [ 0.000000] [mem 0x9b179000-0x9b1fffff] page 4k
    [ 0.000000] [mem 0x9b200000-0x9b7fffff] page 2M
    [ 0.000000] [mem 0x9b800000-0x9b8e8fff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x9bb56000-0xab48ffff]
    [ 0.000000] [mem 0x9bb56000-0x9bbfffff] page 4k
    [ 0.000000] [mem 0x9bc00000-0xab3fffff] page 2M
    [ 0.000000] [mem 0xab400000-0xab48ffff] page 4k
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xab698000-0xab78bfff]
    [ 0.000000] [mem 0xab698000-0xab78bfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xabfff000-0xabffffff]
    [ 0.000000] [mem 0xabfff000-0xabffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff]
    [ 0.000000] [mem 0x100000000-0x2ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x379fc000-0x37cf5fff]
    [ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 MSI_NB)
    [ 0.000000] ACPI: XSDT 00000000ab814098 000AC (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000ab8206b0 0010C (v05 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 00000000ab8141d8 0C4D4 (v02 MSI_NB MEGABOOK 00000022 INTL 20091112)
    [ 0.000000] ACPI: FACS 00000000abb72080 00040
    [ 0.000000] ACPI: APIC 00000000ab8207c0 00092 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 00000000ab820858 00044 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: ASF! 00000000ab8208a0 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: SSDT 00000000ab820948 00200 (v01 INTEL sensrhub 00000000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 00000000ab820b48 0019D (v01 Intel zpodd 00001000 INTL 20091112)
    [ 0.000000] ACPI: SLIC 00000000ab820ce8 00176 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: SSDT 00000000ab820e60 00575 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000ab8213d8 00AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: MCFG 00000000ab821eb0 0003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 00000000ab821ef0 00038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 00000000ab821f28 00315 (v01 SataRe SataTabl 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ab822240 0355D (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ab8257a0 011FD (v01 SgRef SgPeg 00001000 INTL 20091112)
    [ 0.000000] ACPI: MSFF 00000000ab8269a0 00029 (v01 MSI_NB MEGABOOK 00000010 AMI 00010013)
    [ 0.000000] ACPI: DMAR 00000000ab8269d0 00090 (v01 INTEL HSW 00000001 INTL 00000001)
    [ 0.000000] ACPI: SSDT 00000000ab826a60 01464 (v01 OptRef OptTabl 00001000 INTL 20120711)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000034fdfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x34fdfffff]
    [ 0.000000] NODE_DATA [mem 0x34fdf6000-0x34fdfafff]
    [ 0.000000] [ffffea0000000000-ffffea000d3fffff] PMD -> [ffff880343400000-ffff88034f3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x34fdfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x9b171fff]
    [ 0.000000] node 0: [mem 0x9b179000-0x9b8e8fff]
    [ 0.000000] node 0: [mem 0x9bb56000-0xab48ffff]
    [ 0.000000] node 0: [mem 0xab698000-0xab78bfff]
    [ 0.000000] node 0: [mem 0xabfff000-0xabffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x34fdfffff]
    [ 0.000000] On node 0 totalpages: 3125421
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 10893 pages used for memmap
    [ 0.000000] DMA32 zone: 697105 pages, LIFO batch:31
    [ 0.000000] Normal zone: 37880 pages used for memmap
    [ 0.000000] Normal zone: 2424320 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b172000-0x9b178fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b8e9000-0x9bb55fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xab490000-0xab697fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xab78c000-0xabb73fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xabb74000-0xabffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xac000000-0xacffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xad000000-0xaf1fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xaf200000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xaf200000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88034fa00000 s86464 r8192 d24128 u262144
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3076563
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d2a5754c-c679-48b4-9b12-02ae94b83604 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] ------------[ cut here ]------------
    [ 0.000000] WARNING: CPU: 0 PID: 0 at drivers/iommu/dmar.c:488 warn_invalid_dmar+0x7e/0x90()
    [ 0.000000] Your BIOS is broken; DMAR reported at address 0!
    BIOS vendor: American Megatrends Inc.; Ver: E1757IMS.10E; Product Version: REV:1.0
    [ 0.000000] Modules linked in:
    [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.6-1-ARCH #1
    [ 0.000000] Hardware name: Micro-Star International Co., Ltd. GE70 2OC\2OE/MS-1757, BIOS E1757IMS.10E 07/15/2013
    [ 0.000000] 000000000000000b ffffffff81801de8 ffffffff814ee4fb ffffffff81801e30
    [ 0.000000] ffffffff81801e20 ffffffff81062bcd ffffffff81b3101c ffffffff81b3106c
    [ 0.000000] 0000000000000000 ffff88034fdaad00 ffffffff819f4000 ffffffff81801e80
    [ 0.000000] Call Trace:
    [ 0.000000] [<ffffffff814ee4fb>] dump_stack+0x54/0x8d
    [ 0.000000] [<ffffffff81062bcd>] warn_slowpath_common+0x7d/0xa0
    [ 0.000000] [<ffffffff81062c84>] warn_slowpath_fmt_taint+0x44/0x50
    [ 0.000000] [<ffffffff818fb9d9>] ? early_ioremap+0x13/0x15
    [ 0.000000] [<ffffffff818f1b3f>] ? __acpi_map_table+0x13/0x18
    [ 0.000000] [<ffffffff813d98be>] warn_invalid_dmar+0x7e/0x90
    [ 0.000000] [<ffffffff81927a65>] check_zero_address+0x68/0xf4
    [ 0.000000] [<ffffffff81927b06>] detect_intel_iommu+0x15/0xae
    [ 0.000000] [<ffffffff818ebd5a>] pci_iommu_alloc+0x4a/0x6c
    [ 0.000000] [<ffffffff818fb3af>] mem_init+0x17/0x9c
    [ 0.000000] [<ffffffff818e1ccb>] start_kernel+0x1de/0x420
    [ 0.000000] [<ffffffff818e18f6>] ? repair_env_string+0x5c/0x5c
    [ 0.000000] [<ffffffff818e1120>] ? early_idt_handlers+0x120/0x120
    [ 0.000000] [<ffffffff818e15de>] x86_64_start_reservations+0x2a/0x2c
    [ 0.000000] [<ffffffff818e16e8>] x86_64_start_kernel+0x108/0x117
    [ 0.000000] ---[ end trace ed55042d28ea2d46 ]---
    [ 0.000000] Memory: 12223184K/12501684K available (5124K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 278500K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 50331648 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2394.605 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.76 BogoMIPS (lpj=7982016)
    [ 0.000004] pid_max: default: 32768 minimum: 301
    [ 0.000023] Security Framework initialized
    [ 0.000028] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000029] Yama: becoming mindful.
    [ 0.000723] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.002956] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.003897] Mount-cache hash table entries: 256
    [ 0.004021] Initializing cgroup subsys memory
    [ 0.004028] Initializing cgroup subsys devices
    [ 0.004029] Initializing cgroup subsys freezer
    [ 0.004030] Initializing cgroup subsys net_cls
    [ 0.004031] Initializing cgroup subsys blkio
    [ 0.004047] CPU: Physical Processor ID: 0
    [ 0.004047] CPU: Processor Core ID: 0
    [ 0.004050] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.004809] mce: CPU supports 9 MCE banks
    [ 0.004819] CPU0: Thermal monitoring enabled (TM1)
    [ 0.004828] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
    tlb_flushall_shift: 6
    [ 0.004901] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.005496] ACPI: Core revision 20130725
    [ 0.012467] ACPI: All ACPI Tables successfully acquired
    [ 0.014025] ftrace: allocating 20318 entries in 80 pages
    [ 0.020098] dmar: Host address width 39
    [ 0.020099] dmar: DRHD base: 0x00000000000000 flags: 0x1
    [ 0.020100] dmar: parse DMAR table failure.
    [ 0.020489] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.053520] smpboot: CPU0: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz (fam: 06, model: 3c, stepping: 03)
    [ 0.053525] TSC deadline timer enabled
    [ 0.053531] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.053535] ... version: 3
    [ 0.053536] ... bit width: 48
    [ 0.053537] ... generic registers: 4
    [ 0.053537] ... value mask: 0000ffffffffffff
    [ 0.053538] ... max period: 0000ffffffffffff
    [ 0.053539] ... fixed-purpose events: 3
    [ 0.053539] ... event mask: 000000070000000f
    [ 0.094311] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.080318] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK
    [ 0.218665] Brought up 8 CPUs
    [ 0.218667] smpboot: Total of 8 processors activated (38329.08 BogoMIPS)
    [ 0.224614] devtmpfs: initialized
    [ 0.226265] PM: Registering ACPI NVS region [mem 0x9b172000-0x9b178fff] (28672 bytes)
    [ 0.226266] PM: Registering ACPI NVS region [mem 0xab78c000-0xabb73fff] (4096000 bytes)
    [ 0.226792] RTC time: 6:49:04, date: 01/11/14
    [ 0.226816] NET: Registered protocol family 16
    [ 0.226875] cpuidle: using governor ladder
    [ 0.226876] cpuidle: using governor menu
    [ 0.226893] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.226894] ACPI: bus type PCI registered
    [ 0.226896] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.226930] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.226931] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.231360] PCI: Using configuration type 1 for base access
    [ 0.231828] bio: create slab <bio-0> at 0
    [ 0.231908] ACPI: Added _OSI(Module Device)
    [ 0.231909] ACPI: Added _OSI(Processor Device)
    [ 0.231910] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.231911] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.233324] ACPI: EC: Detected MSI hardware, enabling workarounds.
    [ 0.233326] ACPI: EC: Look up EC in DSDT
    [ 0.233774] ACPI Error: No handler for Region [EC__] (ffff88033e484c18) [EmbeddedControl] (20130725/evregion-162)
    [ 0.233777] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130725/exfldio-305)
    [ 0.233779] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC__._REG] (Node ffff88033e4852f8), AE_NOT_EXIST (20130725/psparse-536)
    [ 0.234482] ACPI: Executed 2 blocks of module-level executable AML code
    [ 0.268613] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.284659] ACPI: SSDT 00000000ab68dc18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.285133] ACPI: Dynamic OEM Table Load:
    [ 0.285135] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.298133] ACPI: SSDT 00000000ab68d618 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.298671] ACPI: Dynamic OEM Table Load:
    [ 0.298673] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.314712] ACPI: SSDT 00000000ab68cd98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.315188] ACPI: Dynamic OEM Table Load:
    [ 0.315190] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.339941] ACPI: Interpreter enabled
    [ 0.339948] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.339953] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.339965] ACPI: (supports S0 S3 S4 S5)
    [ 0.339967] ACPI: Using IOAPIC for interrupt routing
    [ 0.339990] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.340148] ACPI: No dock devices found.
    [ 0.366372] ACPI: Power Resource [FN00] (off)
    [ 0.366419] ACPI: Power Resource [FN01] (off)
    [ 0.366465] ACPI: Power Resource [FN02] (off)
    [ 0.366511] ACPI: Power Resource [FN03] (off)
    [ 0.366555] ACPI: Power Resource [FN04] (off)
    [ 0.367075] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.367173] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    [ 0.367293] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
    [ 0.367577] ACPI: \_SB_.PCI0.TPMX: can't evaluate _ADR (0x5)
    [ 0.367642] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
    [ 0.367643] ACPI: \_SB_.PCI0.DOCK: can't evaluate _ADR (0x5)
    [ 0.367659] ACPI: \_SB_.PCI0.WMI1: can't evaluate _ADR (0x5)
    [ 0.367660] PCI host bridge to bus 0000:00
    [ 0.367662] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.367663] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.367664] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.367665] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.367666] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.367667] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.367668] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.367669] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.367670] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.367671] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.367672] pci_bus 0000:00: root bus resource [mem 0xaf200000-0xfeafffff]
    [ 0.367677] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
    [ 0.367735] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
    [ 0.367760] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.367794] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.367819] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
    [ 0.367827] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
    [ 0.367832] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 0.367835] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 0.367887] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
    [ 0.367893] pci 0000:00:03.0: reg 0x10: [mem 0xf7b14000-0xf7b17fff 64bit]
    [ 0.367970] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
    [ 0.367986] pci 0000:00:14.0: reg 0x10: [mem 0xf7b00000-0xf7b0ffff 64bit]
    [ 0.368043] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.368071] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.368097] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
    [ 0.368113] pci 0000:00:16.0: reg 0x10: [mem 0xf7b1e000-0xf7b1e00f 64bit]
    [ 0.368169] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.368229] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
    [ 0.368247] pci 0000:00:1a.0: reg 0x10: [mem 0xf7b1c000-0xf7b1c3ff]
    [ 0.368328] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.368366] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.368391] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
    [ 0.368403] pci 0000:00:1b.0: reg 0x10: [mem 0xf7b10000-0xf7b13fff 64bit]
    [ 0.368460] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.368490] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.368512] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
    [ 0.368569] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.368599] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.368621] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
    [ 0.368678] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.368709] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.368731] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
    [ 0.368787] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.368817] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.368839] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
    [ 0.368896] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.368926] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 0.368953] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
    [ 0.368972] pci 0000:00:1d.0: reg 0x10: [mem 0xf7b1b000-0xf7b1b3ff]
    [ 0.369051] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.369089] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.369114] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
    [ 0.369249] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
    [ 0.369263] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
    [ 0.369269] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
    [ 0.369276] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
    [ 0.369283] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
    [ 0.369289] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
    [ 0.369296] pci 0000:00:1f.2: reg 0x24: [mem 0xf7b1a000-0xf7b1a7ff]
    [ 0.369328] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.369373] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
    [ 0.369385] pci 0000:00:1f.3: reg 0x10: [mem 0xf7b19000-0xf7b190ff 64bit]
    [ 0.369403] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 0.369506] pci 0000:01:00.0: [10de:11e2] type 00 class 0x030200
    [ 0.369520] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
    [ 0.369537] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.369552] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    [ 0.369563] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
    [ 0.369574] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
    [ 0.369649] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 0.374726] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.374728] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.374730] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.374733] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.374803] acpiphp: Slot [1] registered
    [ 0.374809] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.374970] pci 0000:03:00.0: [10ec:5227] type 00 class 0xff0000
    [ 0.375028] pci 0000:03:00.0: reg 0x10: [mem 0xf7a00000-0xf7a00fff]
    [ 0.375359] pci 0000:03:00.0: supports D1 D2
    [ 0.375360] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
    [ 0.375443] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 0.381443] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.381448] pci 0000:00:1c.2: bridge window [mem 0xf7a00000-0xf7afffff]
    [ 0.381581] pci 0000:04:00.0: [1969:e091] type 00 class 0x020000
    [ 0.381627] pci 0000:04:00.0: reg 0x10: [mem 0xf7900000-0xf793ffff 64bit]
    [ 0.381672] pci 0000:04:00.0: reg 0x18: [io 0xd000-0xd07f]
    [ 0.381900] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.381990] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.388100] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.388104] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [ 0.388108] pci 0000:00:1c.3: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.388207] pci 0000:05:00.0: [10ec:8723] type 00 class 0x028000
    [ 0.388235] pci 0000:05:00.0: reg 0x10: [io 0xc000-0xc0ff]
    [ 0.388284] pci 0000:05:00.0: reg 0x18: [mem 0xf7800000-0xf7803fff 64bit]
    [ 0.388429] pci 0000:05:00.0: supports D1 D2
    [ 0.388430] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.388469] pci 0000:05:00.0: System wakeup disabled by ACPI
    [ 0.394758] pci 0000:00:1c.5: PCI bridge to [bus 05]
    [ 0.394762] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.394766] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.394830] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.402198] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.402232] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
    [ 0.402263] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.402295] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.402326] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.402357] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.402388] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 0.402419] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.402688] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 0.402692] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.402741] Found 1 acpi root devices
    [ 0.402767] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.402823] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.402826] vgaarb: loaded
    [ 0.402826] vgaarb: bridge control possible 0000:00:02.0
    [ 0.402849] PCI: Using ACPI for IRQ routing
    [ 0.404045] PCI: pci_cache_line_size set to 64 bytes
    [ 0.404093] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.404094] e820: reserve RAM buffer [mem 0x9b172000-0x9bffffff]
    [ 0.404095] e820: reserve RAM buffer [mem 0x9b8e9000-0x9bffffff]
    [ 0.404096] e820: reserve RAM buffer [mem 0xab490000-0xabffffff]
    [ 0.404097] e820: reserve RAM buffer [mem 0xab78c000-0xabffffff]
    [ 0.404098] e820: reserve RAM buffer [mem 0x34fe00000-0x34fffffff]
    [ 0.404149] NetLabel: Initializing
    [ 0.404150] NetLabel: domain hash size = 128
    [ 0.404150] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.404157] NetLabel: unlabeled traffic allowed by default
    [ 0.404169] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.404172] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.406193] Switched to clocksource hpet
    [ 0.408777] pnp: PnP ACPI init
    [ 0.408783] ACPI: bus type PNP registered
    [ 0.408822] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.408824] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.408831] pnp 00:01: [dma 4]
    [ 0.408839] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.408852] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.408908] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.408937] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.409005] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 0.409006] system 00:05: [io 0xffff] has been reserved
    [ 0.409007] system 00:05: [io 0xffff] has been reserved
    [ 0.409008] system 00:05: [io 0xffff] has been reserved
    [ 0.409010] system 00:05: [io 0x1c00-0x1cfe] has been reserved
    [ 0.409011] system 00:05: [io 0x1d00-0x1dfe] has been reserved
    [ 0.409012] system 00:05: [io 0x1e00-0x1efe] has been reserved
    [ 0.409013] system 00:05: [io 0x1f00-0x1ffe] has been reserved
    [ 0.409015] system 00:05: [io 0x1800-0x18fe] could not be reserved
    [ 0.409016] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 0.409017] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.409033] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.409058] system 00:07: [io 0x1854-0x1857] has been reserved
    [ 0.409060] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.409121] system 00:08: [io 0x0680-0x068f] has been reserved
    [ 0.409122] system 00:08: [io 0x0c10-0x0c1f] has been reserved
    [ 0.409123] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.409150] system 00:09: [io 0x04d0-0x04d1] has been reserved
    [ 0.409152] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.409182] pnp 00:0a: Plug and Play ACPI device, IDs ETD0301 PNP0f13 SYN1500 SYN0002 (active)
    [ 0.409206] pnp 00:0b: Plug and Play ACPI device, IDs MSI0001 PNP030b (active)
    [ 0.412551] pnp 00:0c: Plug and Play ACPI device, IDs ENE0110 (active)
    [ 0.416130] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.416131] system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.416132] system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.416133] system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.416135] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.416136] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.416137] system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.416138] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.416139] system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.416140] system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.416142] system 00:0d: [mem 0xf7fef000-0xf7feffff] has been reserved
    [ 0.416143] system 00:0d: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
    [ 0.416144] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.416328] pnp: PnP ACPI: found 14 devices
    [ 0.416329] ACPI: bus type PNP unregistered
    [ 0.422174] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 0.422176] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.422177] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
    [ 0.422195] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.422196] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.422197] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.422200] pci 0000:00:1c.0: BAR 14: assigned [mem 0xaf200000-0xaf3fffff]
    [ 0.422202] pci 0000:00:1c.0: BAR 15: assigned [mem 0xaf400000-0xaf5fffff 64bit pref]
    [ 0.422203] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 0.422205] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.422206] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.422208] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.422210] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.422213] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.422215] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.422219] pci 0000:00:1c.0: bridge window [mem 0xaf200000-0xaf3fffff]
    [ 0.422222] pci 0000:00:1c.0: bridge window [mem 0xaf400000-0xaf5fffff 64bit pref]
    [ 0.422227] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.422231] pci 0000:00:1c.2: bridge window [mem 0xf7a00000-0xf7afffff]
    [ 0.422238] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.422240] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [ 0.422244] pci 0000:00:1c.3: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.422251] pci 0000:00:1c.5: PCI bridge to [bus 05]
    [ 0.422253] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.422257] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.422264] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.422265] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.422266] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.422267] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.422268] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.422269] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.422270] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 0.422271] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 0.422272] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 0.422273] pci_bus 0000:00: resource 13 [mem 0xaf200000-0xfeafffff]
    [ 0.422274] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.422275] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
    [ 0.422276] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.422277] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.422278] pci_bus 0000:02: resource 1 [mem 0

    If I understand this correctly, then you have an Optimus graphics card (couldn't find anything online, but your lspci looks like it). I too have such a setup on my laptop. The thing to keep in mind here, is that your main graphics card is the Intel integrated card. So instead of installing your system like with an nvidia card, you install it like an intel card. Specifically, you would want to follow the instructions on Bumblebee. Once you followed them, the whole graphics part runs on the Intel card. Once you want to play a game or do some other heavy graphics card work you call your application like this:
    optirun wine /path/to/game.exe
    Notice how optirun tells the system to use the nvidia card. It will take a second or two to start it (specifically, enable the card, start another X screen and launch the application on it transparently). Follow the instructions in the Wiki if you have any problems.
    If you don't have an Optimus card (just NVIDIA, no Intel), then don't follow any Optimus instructions, just usual NVIDIA stuff from the Wiki.

  • Custom bios for MSI GE70 2OC

    Hello
    I have a MSI GE70 2OC with Windows 8.
    My BIOS is E1757IMS.511 build 08/27/2013, EC Version is 1757EMS1 Ver. 5.06, build 07/30/2013.
    I saw in another topic that in modified bios FAN behaviour can be changed? I really don't like that FAN is always on when on AC power.
    What else can be changed or what hidden functions has my BIOS?
    TIA

    Quote
    I saw in another topic that in modified bios FAN behaviour can be changed? I really don't like that FAN is always on when on AC power.
    yes its possible to be done by custom way, but not from BIOS

  • Please help me with my MSI GE70 notebook!

    Dear forummembers,
    Recently I have bought this notebook: MSI GE70-i550M287FD FreeDOS.
    I have installed Windows 7 on it. However, after barely using this notebook 2 weeks I have already encountered some troublesome problems.
    First of all I had some troubles using the Driver CD which came along with the notebook. I was able to manually install most of the drivers that were present though. But I have recently found out that I my notebook somehow is unable to install ANY diver by itself or so. e.g. whenever I try to connect my printer, it tells me that it was unable to download/install the needed drivers for the printer. Therefore I am not able to use it. The same goes up for likewise devices which require drivers being installed before use. An external harddisk and a mouse are the only things that will connect.
    Then there is another problem: When I go to device manager I see this:
    I haven´t got a clue what it is for and what to do about it. However I do have a feeling it has something to do with my first inquiry.
    Lastly there is a problem regarding windows update. I am unable to do anythign with it or updating anything as I keep getting the following message: Name: MSI Windows Update problem.png Views: 16 Size: 234.4 KB
    I haven´t got clue how this came to be and what to do about it.. It´s very hard for me as I am not a computer expert.
    Despite these problems I am still havign a great time with my purchase!
    I hope that you will be able to help me in these troublesome matters.
    Thank you all in advance for your efforts!
    Yours,
    esmorax

    Quote from: esmorax on 23-November-13, 19:32:15
    Is there a way to fix this without having to erase all on my NB?
    Where can I find the appropiate drivers for my NB? As the Driver-CD delivers them for Windows 8 and I have to manually install the Windows 7 ones :C
    If you have to erase All your Notebook then you definitely need to reinstall OS in a proper manner... which means proper partitioning HDD. You must have more than 1 partition on HDD if it is only one in notebook. Drive C (50-100GB) for pure OS and Programms and Drive D for "My ..." folders, documents games, movies etc.
    AS about drivers just use GOOGLE typing GE70 2OE or 2OC or 2OD... whatever you have. Check the model in BIOS.
    Quote from: esmorax on 23-November-13, 19:32:15
    Could there be any other source of this problem despite windows 7 problem? And would there be any solution?
    Yeah, the gasket between the mouse and the seat of the chair:D I hope you have sense of humor and won't take it serious because it is quite popular joke.

  • Lenovo G550 Power Jack Broken

    Over the last week my G550's power jack has become less and less reliable and  eventually stopped charging the laptop at all.
    I've seen several discussions about this being a problem but no actual instructions or pictures on how to get access to the motherboard.
    Does anyone know anything else about this problem?
    Thanks in advance.

    To get to the power jack, you are removing most every screw on the case. Remove the panel above keyboard that houses power button, then there are more screws beneath it. Then you can get to hinges, unscrew them, find another screw at each hinge after hinge is out of the way. Also unfasten the keyboard, but don't rip it out, to find a couple more screws underneath the keyboard. And finally you can take the two halves of the case apart well enough and get in to disconnect the power jack. The DVD drive will slide out, no screws attaching it. The wiring for the power jack goes to a location by the memory where it attaches to the motherboard. I disconnected the cable by the memory and pulled it through easily.
    Should take a week for the part to arrive to me. Crossing fingers that the whole trouble is this and nothing else. Found other thread here that talks about securing the jack better: http://forums.lenovo.com/t5/Lenovo-3000-and-Value-line/G550-power-connector-is-this-a-weak-point/td-...
    Clearly there is a fault in the design of this laptop model, I think, when many people are having the same fatal issue.
    Also, now that I think of it: if you wanted to test if this was the problem for you laptop without the trouble of disassembling everything, you could easily disconnect the power jack by removing the memory cover and unplugging it there; then plug in a replacement power jack (which you'd need to order) and test. If all works, you could then go through the bother of taking everything apart (or finding someone to do it).

  • What SSD do they put in the MSI GE70 2OE-013BE

    Hey, I got a question on the MSI GE70 2OE-013BE, I would like to know what SSD is in that pc because the retailer can't tell me anything about it and said that I should contact MSI, so this is just a simple question. What SSD is it?
    ty for help!

    SSD's are known to use a fraction of the power that a standard mechanical hard drive will use. Overall, you could probably get the worst SSD that is made out there and still have better performance and use less power than a standard mechanical HDD.
    I'm not really sure why you're still after this. The only real downside to a SSD is the life expectancy, and even that has been maximized to such a degree that it's not really that much of an issue.
    EDIT:And as for performance, most of the SSD's I've seen MSI use are based on the Sandforce 2281 controller (I believe that's the controller anyway), and those generally get around 400 MB/Sec sequential read speed, which is more than sufficient in most applications. You won't generally notice if it's faster than that, and even if it was only 300 MB/Sec you wouldn't really notice it.

  • HP Pavilion DV6535ep power jack / USB module compatible part numbers

    Hello,
    My HP dv6535ep has recently started to turn off randomly. At the beginning I thought it was due to CPU/GPU temperature but then discovered that it was in fact the power jack that was getting very hot and that it melted partially. I fully disassembled the laptop and inspected the power jack / USB module and found no defects other than a carbonized soldering point corresponding to the +19V input line. I tested the power supply cable and the PCB board for short circuits, which there was any. I also tested the power supply which is working. Since the power supply cable tip significantly melted, I replaced it with a new cable and assembled the laptop again. However the problem persists, with the new power supply tip, the tip and connector gets instantaneously very hot once the laptop is turned on. The laptop does not even pass the BIOS POST, it shut downs right there. For the sake of completeness I must add that the power jack blue light is lit once I connect the power tip.
    So in summary:
    * After turning on the laptop, the DC power supply tip and jack connector get very very hot in a question of seconds (to the point of melting the tip if not disconnected immediately).
    * The DC power jack light is lit after plugging the power in.
    * The laptop often does not turn on at all and when it does, it shutdowns during BIOS POST.
    * The power supply is working (I tested it) and the power supply cable and tip are working too (I replaced them with new parts).
    So that led me to believe the power jack / USB board is defective and needs replacement and that is the reason I'm writing here in the first place. Would you be kind and provide the power jack / USB board part numbers which are compatible with my laptop? The part number of current (defective) power jack / USB board is
    DDAT8APB3002907
    I'm having trouble finding exact matches on surplus stores, where the best I got are DDAT8APB300XXXX, where the last four digits don't match. Are they compatible?
    Hoping to hear from you,
    Thank you,
    - Angelo
    This question was solved.
    View Solution.

    Partsurfer information:
    446524-001   In stock  
    USB ports and power connector board - For 90-Watt AC adapter connection
    RoHS: Modified
    40.38
    0.00
    40.38
    449454-001   In stock  
    USB ports and power connector board - For 65-Watt AC adapter connection
    RoHS: Modified
    40.38
    0.00
    40.38
    You will have more luck finding it by the part numbers above. The price seems a little salty to me and you might have more luck on ebay or an online parts house.

  • MSI GE70 - Can't watch videos properly

    Hi,
    I have got a few months old MSI GE70 2OE, and whilst my computer is plugged to the charger, it works fine - I can game, I can watch and stream movies perfectly etc. However, when I unplug my computer from the charger for instance to bring it with me to bed, the computer fails to play videos properly.
    When unplugged, videos cannot be streamed nor played properly - either they do not start or they start and then just freeze after 2-3 seconds.
    Why is this? It has always been like this; when I unplug it, I'm on my wireless internet (it's of good quality). Note that when I replug it to the wired internet and the charger, it works fine.
    And no, it does not have anything to do with the performance options changing to balanced or sth like that when I unplug it, because I have them set to high performance at all times.
    Regarding OS - I use Windows 8.1 - I experienced these issues with Windows 8 as well.
    EDIT: I also lose sound functionality.
    All of this applies to YouTube-videos as well.
    Thanks in advance

    each power profile has different configs when is used on ac charger and when its used on battery
    you have to edit your use power profile, its advanced options,
    from there you can defined max performance for wifi and high performance for onboard gpu,
    when its running on battery

  • MSI GE70 2OE minor freezes and scratchy sounds

    Hi Guys,
    Recently I have become a happy owner of the notebook MSI GE70 SOE. However I found few problems which really destroy the pleasure of playing games on it.
    1) First of all I noticed that whenever the computer is going on high performance, balanced or even Eco power option there're problems with the USB and headphone ports. The computer starts to do little freeze for 1-2 seconds and also there is a scratchy sound both from headphone and notebook speakers.  I am using the USB wireless mouse and it often freezes during that time.The same problem occurs during game especially Battliefield 3. The notebook works quite Ok when it is on the Office power option but occasionally those problems occur on this option.
    I'd like to inform that I did all the drivers and windows 8 updates from the MSI website. I'm thinking that it probably can be a problem with the power supply but I'm not an expert on that.
    I would be very grateful for any help from you guys.

    What I would probably do first is check the temperatures, just to be sure.
    Use CoreTemp and MSI Afterburner and report the IDLE temperatures and the temperatures while playing a game. This would be most helpful.
    While it seems strange that it happens only with the AC plugged in, it might also have something to do with the computer overheating, and once you unplug it, it will throttle back quite a bit and cool down and catch up to itself. At least, that's my best guess at this point.

Maybe you are looking for

  • HD Video Monitoring

    We are currently an SD edit house only (DV Footage), but we're going to start delving into a little bit of HD delivery. I am looking for an economical way to monitor this HD footage. I only need to monitor the footage. All footage will be provided on

  • Blackberry Calendar "invite attendee" feature

    My husband has a Pearl Flip and I have a Curve 3G we are trying to add calendar appointments on both of our phones using the 'invite attendee' feature.  When my husband creates an appointment he just invitee's me and the appointment shows up on my ca

  • I need info about CL_XML_DOCUMENT

    Hi to all, I need info about the class CL_XML_DOCUMENT and his methods. I only have seen information of a few methods. Where can I find more information and examples of use about this class?

  • My doc is using a lot of memory.  how do i fix this problem

    i was playing aroung with my doc.  Adding and removing applications.  Now my doc is using all my memory. I dont know what I did?

  • I lost all my mail in my inbox. I lost recently also all my notes. Who can help?

    Hello, I notices today that I lost all my mail in my inbox. In Iclou, ma and iphone. I recently also lost all my notes, also in all places. What could cause this? Thanks, Marc.