MSI GE70 VT-X Disabled Help please i need it Enabled THX!

Hi I need a Bios-Unlock for my MSI GE70. In my MSI GE70 are the VT-X disabled i need 2 enabled. I now that my intel support this feature but MSI give me no chance to chance this option in his BIOS System Help me please
System Information
Bios:E1756IMS.10E
Bios Build:07/11/2012 13:56:39
EC Version:1756EMSI Ver4.04
EC Build 04/26/2012
Marketing Name GE70 ONC
Model Name MS-1756
Help me Please i need it 4 my VM Ware

I have more or less the same problem 
my bios is the .106 and vt-x does not work. I tried to flash it to .10E but it can't. When I execute flash.bat there is always an error message. What can I do ?

Similar Messages

  • My iPhone 4s was playing music now won't on my sony dream machine how do I fix. "This device is not supported by this I-phone".  I have turned  off phone unplugged sony and did the pin reset on bottom.     Help please I need my tunes

    My iPhone 4s was playing music now won't on my sony dream machine how do I fix. "This device is not supported by this I-phone".  I have turned  off phone unplugged sony and did the pin reset on bottom.     Help please I need my tunes

    Try plugging it up to your computer and launching iTunes and either resetting it to factory settings or resetting to last sync. Hopefully it just noticing it's plugged up to iTunes will fix it. This happened to my friend once and all she had to do was plug it into her computer and that fixed it.

  • HT4623 help my iphone5 has had the passcode changed by one of my kids who cannot remember it now my phone keeps disabling HELP please!

    help please
    i cannot recall passcode & my phone keeps disabling me when i try to guess the pass code

    1)  Connect to iTunes on the computer you usually Sync with and Restore...
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
         Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Help please, I need to change my default home page.

    Hi,
    Help please in changing my default home page.
    Thanks

    See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
    <br />
    <br />
    '''You need to update the following plugin:'''
    *Adobe PDF Plug-In For Firefox and Netscape
    #'''''Check your plugin versions''''' on either of the following links':
    #*http://www.mozilla.com/en-US/plugincheck/
    #*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #'''Update Adobe Reader (PDF plugin):'''
    #*From within your existing Adobe Reader ('''<u>if you have it already installed</u>'''):
    #**Open the Adobe Reader program from your Programs list
    #**Click Help > Check for Updates
    #**Follow the prompts for updating
    #**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
    #*Download complete installer ('''if you do <u>NOT</u> have Adobe Reader installed'''):
    #**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
    #**Use either of the links below:
    #***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
    #***''<u>Also see Download link</u>''': http://get.adobe.com/reader/otherversions/
    #*After the installation, start Firefox and check your version again.

  • MSI GE70 0NC - Missing driver HELP!

    Hi people,
    So I have owned my notebook since september, and just recently (December time i think) I started to get the BSOD when checking the stop codes i found that the code was linked to the video card failing. I checked my drivers to see if any needed updating or where missing since i installed windows 7 and got rid of 8 as I use this notebook as a cad and rendering station for work. I noticed i have two missing drivers that windows cant automatically install. one is a PCI Device for PCI bus 2, device 0, function 0. ( PCI bus 0 and 1 are my Intel 4000 and GTX 660m display adapters). and the driver status says "The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver." the next missing driver is labelled as unknown device and upon reading its properties gives me this location info on Microsoft ACPI-Compliant Embedded Controller with the same status as before. I have been on the MSI downloads for my notebook and have downloaded all drivers/ BIOS/ Firmware that i can, with no success.
    Can anyone help me find these missing drivers to see if ths stops the BSOD because i really cba sending it to MSI for them to say it's a software issue and my fault for changing to windows 7.
    Thanks
    Callum

    chipset drivers: http://download.msi.com/nb_drivers/cs/cs_intel7series_9.3.0.1020_al00.zip
    Intel HD card: http://download.msi.com/nb_drivers/vga/vga_intel_gt650m_gtx660m_9.17.10.2884_0x76849241_8764.zip
    Nvidia drivers: http://download.msi.com/nb_drivers//vga/beta_nv_8.17.13.275_w764.zip
    [or latest one from Nvidia.com]
    all drivers at: http://www.msi.com/product/nb/GE70_0NC.html#/?div=Driver&os=Win7 64
    you may have some device with no drivers for it, this is because Win8 BIOS/EC has addiction airplane modes,
    which can't be used under Windows7, but that's not a reasons for any BSODs

  • My ipad is disabled, help please

    Hi,
    I changed my password on my ipad but unfortunately didn't write it down ad have now forgotten it. My ipad has disabled itself and now I cannot get on it. How can I rectify the problem please?
    Thanks

    Hello there, 19verity93.
    The following Knowledge Base article offers up some great information in regards to your issue:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT1459 ipod disabled help please?

    ipod disabled hlep

    Hey Rhoddan,
    It sounds like maybe your device was disabled after entering the wrong passcode - you would see this on your screen (but with iPod instead of iPhone):
    If that is what you're seeing, then check out the recommended troubleshooting steps in here:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    Welcome to Apple Support Communities!
    Regards,
    Delgadoh

  • Msi 890FXA-GD70 debug "ff" help please

    msi 890FXA-GD70
    amd phenom II X6 3.3 GHZ 1100T
    TR2 RX 750w Thermaltake
    2 sticks = 4G PC3-12800 1600mhz DDR3 Patriot
    Radeon HD 5770 1gb pci-e
    coolmaster 912 haf case
    I've been reading other forums.. i tried many steps clear bios, remove battery, change the shunt (I also disconnected the PSU cable before these steps)\\\\\\  re-lap CPU 2 times, boot on 1 stick DIMM1 slot to fix my problem.. everything started today in the morning.. i can say my pc is new..i build it about 2 days ago everything was working fine this morning i tried turning it on and i kept on getting the "ff" code.. i dont want to return this motherboard i barely have 5 days

    Quote
    antistatic-mat
    You didn't power it on there did you? As anti-static means it's preventing static.
    However it's conducting!!
    That mat may have killed it when you tried to power it.
    I would RMA the board in this case and never ever power it again on such a mat.

  • Help please! Need to restore my OSX Midi Network driver!

    Hello friends, this is the first time i write you guys here.
    But heck, i've solved hundreds of problems just reading these boards for some years now!
    So yeah, i have been a Touchdaw user for some months and everything went great until
    a couple days ago it broke/froze up, even crashing my audio midi setup issue that i managed
    to fix (thanks to you guys) by deleting some plist around.
    But when i came back today, to set everything up again, i found that there's no NETWORK
    icon on the audiomidi setup anymore.
    Thing is i can't actually find a single post about this issue anywhere on the web
    Someone said that deleting the "com.apple.midi.netsetup" file would restore everything
    but..bingo, there's no such file where i believe it used to exist before the crash.
    My guess is i need to restore this file somehow, or install a "midi network driver"??
    I seriously need this to work again, all my midi instruments are in another room, now i can't
    record as comfortable as it used to be with  the wireless network and it's making me lose a bunch of time!
    2012 Mac Pro 10.7.5 OSX
    I hope someone can help me! — Thanks in advance!!
    Please excuse my english,
    Jesús

    Hello Cheeky,
    Unfortunately, i haven't found info about this issue and i had to move a couple keyboards into the control room.
    I guess i'll have to reinstall my OS, but there's a lot of things that could go wrong...:( i don't know.
    Everything would be cute again if the network thingy appeared :'(

  • Help please(I need this language back

    I have successfully updated my n95 to the newer firmware.but the problem is the language(Arabic Language has dissapeared.i write in arabic but now after updating, my n95 doesnt read or write any thing in arabic.
    have bought my n95 from malaysia and i live in dubai. .please help me how to install this language back.
    please someone tell me how and where and which software is any to use to solve this issue
    plese help

    06-Dec-200704:19 PM
    summerguy wrote:
    how i can use care point?
    I think they call them service points in russia, and I think this is the page you need to find one:
    http://www.nokia.com.ru/A4376013

  • I can't find anywhere MacBook air A1237 1.8GHz Logic board 820-2179-C help, please I need it

    I can't find anywhere MacBook air A1237 1.8GHz Logic board 820-2179-C - please help me

    http://www.ifixit.com/MacBook-Parts/MacBook-Air-1-8-GHz-Original-Logic-Board-/IF 188-007?utm_source=ifixit_cart&utm_medium=cart_product_link&utm_content=product_ list
    If you're into DIY projects I recommend bookmarking IFixIt.com as more often then not they'll have the part you're looking for on an Apple computer.

  • N70 HELP PLEASE DESPERATELY NEED MESSAGES BACK

    PLEASE PLEASE PLEASE HELP! JUST LOST ALL MY MESSAGES IN EVERY FOLDER ON MY TRUSTY N7O THROUGH THE EXPLANATION BELOW AND NEEEEED THEM BACK AND WOULD LIKE TO KNOW IF THIS HAS HAPPENED TO ANYONE ELSE IN THIS WAY OR UNDERSTANDS AND HOW DO I GET THESE MESSAGES BACK??
    THIS IS WHAT I DID OR HOW IT HAPPENED: 
    SORRY FOR LONG EXPLANATION
    Was setting my work Gmail -(laptop is in for service)- used "setting wizard" as always-only had the personal Gmail on my N70 and used the other username by mistake- went to "MESSAGE SETTINGS" "EMAIL" selected "mailbox"- "options"- "remove mailbox" the 1st removed no issues but new mailbox wouldn't remove
    -took me to "mailbox in use" thought the "mailbox in use" "gmail" was selected tried to remove and nothing happened, pushed (c) to delete and thought maybe I hadn't pushed it properly-(c) again but realized this froze the phone for a bit (or it was just in a long delay), it frozen with only outlined frames visible for a bit,so I pushed "back" a few times ("back" wasn't visible though) it went back to MESSAGES but 1 or 2 of the folder icon's were now blank with a ? in place of the icon. It wouldn't switch off-tried pushing that back button again (WHICH STIL WASN'T VISIBLE AND NEITHER WAS "OPTIONS") 3 or 4 times but before I realized it started reacting but strangely and delayed and then the rest of the message folder icons were now also gone and replaced with ? and now frozen again. I TOOK THE BATTERY OUT because it wouldn't switch off.
    Switched it back on and ALL MY MESSAGES FOR EVERY FOLDER WERE GONE. DRAFT FOLDER VERY IMPORTANT- HAD +/- 10 MESSAGES ABOUT 28SMS LONG THAT I WAS GOING TO COPY AND PASTE (which is why I still N70) INTO EMAILS (which I was trying to create)
    I know I chose the option long ago to "SAVE MESSAGES TO PHONE" when I first got the phone.
    I'm quite knowledgeable with Computer Tech and would have just "restored to previous time" but 2 things- I don't know if it's possible on a "sort of smartphone" and 2: I don't even remember when last I ever did the "back-up phone to memory card"
    I have found a data doctor: it "says it's a tool to restore deleted, erased or accidentally lost text messages, phone book saved contact numbers from mobile phone sim card." but it needs a usb sim reader (which I could try get) and the data doctor is quite expensive

    Reset the SMC
    http://support.apple.com/kb/HT3964
    Power
    The computer doesn't respond to the power button when pressed.
    A portable Mac doesn't appear to respond properly when you close or open the lid.
    The computer sleeps or shuts down unexpectedly.
    The battery does not appear to be charging properly.
    The MagSafe power adaptor LED doesn't appear to indicate the correct activity.

  • Help, please -  I need a box to pop-up when user hovers over a field with their mouse??

    I created a form with several drop-down fields / questions.  I would  like to create a box that pops up when the person who is filling out the  form hovers over the question/ field with his or her mouse.  The box  would contain additional information about the question that the person  might consider before they select the answer.  I don't want to clutter  the form (and not all form-filler-outers will want or need to see the  additional information) so I want it to pop up when the person hovers  over the question with their mouse.
    Can someone provide some help with how I can do this?
    I'm still new to this.
    Thank you!!!

    Hi,
    To follow on from radzmar, here is a summary of the features that are available/restricted depending on how you deploy your form.
    There are two ways to apply Reader rights, one is using Acrobat Standard (v9) or Acrobat Professional (v8). The other is using an Adobe server product called LiveCycle Reader Extensions ES2.
    You don't need script to apply the Reader rights to your form. Once you have applied the rights, users with Reader will be able to save the data in the form, however there may still be other restrictions in place, like attaching documents to the form or exporting XML data.
    There summary is also available in PDF, with screen shots, here: http://assurehsc.ie/blog/index.php/2010/05/using-livecycle-forms-in-acrobat-and-reader/
    Hope that helps,
    Niall

  • HELP Please, I NEED to know HOW to upgrade from iPhoto 8.1.2 to the latest

    I cannot find link where to buy the upgrade to iPhoto 9 in the app store which will enable further updates.
    Need to do this before updating to OSX Yosemite.
    I do not want or need the entire ilife 11 suite just the iPhoto component.
    Can anyone provide the link please? :-)
    Have searched and searched to no avail.
    TIA

    Back up your other data, use the Disk Utility or a product such as Carbon Copy Cloner to create a bootable clone of Mavericks on an external drive, and click here for information.
    (125780)

  • HELP PLEASE, I NEED TO TRANSFER MY LIBARY BETWEEN COMPS.

    Howdy i just got a new laptop and was wondering if i could transfer my itunes libary and playlists from my tower(where the last three yrs worht of my music is) to my laptop with out oo much hassel, i dont have a router can any one help.

    The following Apple article tells you how to move your music library to a new computer using your iPod.
    http://docs.info.apple.com/article.html?artnum=300173
    Although the method is for an iPod, it is easilly adapted to other methods of moving, including an external HD and copying across a network from one PC to another.
    The basic steps are the same what ever medium you use to do the copying.

Maybe you are looking for

  • Help with Java program and PKGBUILD

    Hey guys, I'm fairly new to Arch and very new to making packages. I write a lot of my stuff in Java, and I know that Java is normally a pain to package on Linux systems. I have had a good look at the Java Packaging Guidelines, http://wiki.archlinux.o

  • Converting an html file with jsp contents to a text file for download

    Hi guys, I'm currently having troubles with downloading a .jsp file to a doc file. The thing is i am able to download the desired file and make it as a .doc but when i open it with ms word 2007 i can only see the content of the html. The dynamic cont

  • Petstore - unable to connect to embedded LDAP Server

    I have installed the Petstore 1.3.1 02 demo on a Weblogic 8.1 server on Windows XP. After running the Configuration wizard, when trying to start the PetStore Administration Sever using the startPetStoreWebLogic.cmd file, I receive the following error

  • Mail vs Thunderbird

    I was wondering if anyone out there could give me an idea of the benefit of moving my email from Thunderbird to Mail. Any ideas?

  • FDF in Unicode

    Hello everyone, I am using Acrobat 9 Pro on Windows 7 and having a problem so hoping someone can please help. To create a PDF form I generate the data FDF file from our database application. Then import this file to its matching PDF form in Acrobat 9