MSI GeForce 4 MX 440 with AGP 8X - No Dual Display?

Hello! I have just purchased the MSI MX440-VTD8X based on GeForce 4 MX 440 with AGP 8X. I have the latest drivers and everything but I’m unable to enable the clone option to have pictures on both my monitor and my TV. The option is grayed out. The TV connection is correctly connected. I can choose my TV as the primary display, it’s just that I cannot have dual display! Isn’t my card supposed to have this option? Here is a pic:

A previous poster (in a different thread) found that if the video card has both analog and digital monitor outputs, then for TV-out to function properly with the VIVO 4-port adapater, you need to connect your analog monitor to the digital output using the supplied digital-to-analog converter.
I have a new G4 MX440 VTD8X and had a similar issue to the one described here....the TV could not be detected by the video card when connected via RCA jacks (S-video worked, but could not CLONE the monitor). I moved my primary monitor from the analog to the digital port, and viola, the TV out functions perfectly now. :D

Similar Messages

MSI Geforce 4 MX 440 -T8X

Hi,
I had a boring problem while updating my card bios with Live Update.And now I can't use my video card because I killed my card with bios update.Is Someone has a bios image file for MSI Geforce 4 MX 440 - T8X ??
P.S/ Please Help me for finding bios image I can't find in anywhere ( correct version of bios)
Sorry about my language .
Blowfish

i just bought this card
i formatted my harddrive
reinstalled winxp pro updated to service pack 1
and installed cumultive patch for internet explorer
when i try to click on the tabs "MSI information" & "MSI clock"
i always get a rundll32.exe error
also MSI 3D!Turbo Experience crashes internet explorer
with an error
AppName: iexplore.exe AppVer: 6.0.2800.1106
ModName: msivga.ocx ModVer: 1.0.1.0
Offset: 00010a6d

Has anyone tested MSI Geforce FX 5200 T128 with latest Riva tuner to check if its 64 bit or not?

hey guys,
has anyone ever checked MSI Geforce FX 5200 T128 with Riva Tuner to check if it is 64 bit or 128 bit, please help me

its 64 bit anyway if ur talking about the mem not sure on the gpu either 128 bit or 256

Msi GeForce FX 5200 tdr 128 agp problems

Is there any way to use msi GeForce FX tdr 128 in 4x agp mode under windows XP or 98?Is there any way to use thos card in pci mode under WIn XP?

Thanks for your reply.
If it's an hardware thingy then, why even in 3D the fan doesn't spin up? Not even when the core is o/cked?
Beats me. Anyway I'll try to add another fan (5000RPM) to see if it gets better

K7T266 Pro2 boot hangs with MSI GeForce 4 MX 440

Just installed the mobo and VGA combo mentioned in the Title and I get very regular boot freeze - mobo beeps and hangs with 2 possible results - 1/ no video signal 2/ garbage on screen
After many many restarts the system boots OK. On next power-up the same story.
The BIOS is dated November 2002 (sorry, cannot find the version string now) , the GF4 card was tested with 2 versions of its BIOS: 4.17.00.24.36 and 4.17.00.30.00 and the result is the same.
CPU is Athlon 1200, 512 MB DDR RAM.
Any help appreciated. If it is necessary for me to provide more information, I will be happy to do so.

What OS are you using?
Did you do a clean install after installing the MB and Video Card?
Did you update your Video Drivers to the latest and greatest?
What version of Directx are you using?
Did you set your BIOS settings back to default?
What other hardware are you using that may be incompatible with the MB and/or Video card you're using?
Check to see that you didn't accidently knock one of the memory modules loose when you were installing the MB.
Also check to see if your processor fan has enuff thermal grease and is seated on your processor properly.
Hope the checklist helps...I had the same problem with mine when I got it and I flashed the BIOS then reloaded my OS when that failed to fix it. It's been great since then. Remember to backup any data that you might want to keep before you reload though...GL! 8)

MS-6366 AGP w/ Geforce 4 MX 440

i have an msi ms-6366 mobo and i just recently got a geforce 4 mx 440 8x agp 128mb card. now my mobo supports 4x and the card will support 1x, 2x, 4x, & 8x agp slots. when i put it in it works fine but is saying my card is only 64mb. i talked to a person about changing the bios settings to 128mb agp aperture and i was wondering if that will work or could it be a different problem.
Thanks,
Aaron

Aaron,
If your card has 128Mb of RAM it is not going to show anything about the amount of RAM on your Vid Card in your BIOS. It is only going to show the default apeture size for the AGP slot, which is 64Mb.
Take Care,
Richard

Nvdia Geforce 4 mx 440 Video Card

I have a MSI Geforce 4 MX 440 AGP 4x Video card and when i install the drivers and reboot i have 2 features (MSI Clock and MSI Information) that show up right by my settings icon in display properties. When i click on those i get a dont send or send error. What is doin this

cjms,
Since my crystal ball is still in the shop and you really did not give me any information on your system, I am going to resort to guessing.
I am going to guess, you at one time loaded the MSI drivers and then you switched to the nVidia Drivers.
Even if you did not load the nVidia Drivers - go download them from the nVidia Website and install them. Then go in to your windows directory and delete the file msicpl.dll
For the extra features:
Use notepad to make a new file and put in it what I quoted below and then save it with the .reg extension.
Quote
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINESOFTWARENVIDIA CorporationGlobalNVTweak]
"Coolbits"=dword:ffffffff
"NvCplEnableAGPSettingsPage"=dword:00000001
"NvCplEnableAdditionalInfoPage"=dword:00000001
"NvCplEnableClearViewPage"=dword:00000001
Double Click on it and it will make an entry into your registry.
That will open all the extra options in the Detonator4 Drivers including the Core and RAM Speeds for your GF4.
Take Care,
Richard

Geforce 4 mx 440 dual display - mandrake 9.0

[size=11]
I am wanting to switch my workstation from Windows 2000 to Linux Mandrake 9.0. Anyone tell me if all of the TV in/out and dual display stuff will work under Mandrake 9? It is the GeForce 4 MX 440 with the dual VGA out and the s-video input/output connections. The main concern is the dual display. Let me know at [email protected] or post here. Thanks for the help!
Jason Douglas
http://scopicmedia.com/jasond/
[/SIZE]

A previous poster (in a different thread) found that if the video card has both analog and digital monitor outputs, then for TV-out to function properly with the VIVO 4-port adapater, you need to connect your analog monitor to the digital output using the supplied digital-to-analog converter.
I have a new G4 MX440 VTD8X and had a similar issue to the one described here....the TV could not be detected by the video card when connected via RCA jacks (S-video worked, but could not CLONE the monitor). I moved my primary monitor from the analog to the digital port, and viola, the TV out functions perfectly now. :D

HELP ! System freezes now with new MSI GeForce 6600GT AGP

Any/All help is greatly appreciated... this is driving me crazy.
Just installed a new MSI 6600GT AGP card. Windows/Apps work fine.. but system keeps freezing (disabling keyboard as well) when running certain games (3D?) like Medal of Honor, Prince of Perisa, SplinterCell. Also, freezes on 3DMark01SE benchmark software. What strange is 3DMark2K5 ran fine.. and returned a respectable score (3078). I've tried unistalling/re-installing latest MSI drivers (71.22), Nvidia's 66.93, and removing nVidia's GART drivers. I've also disconnected other hardware to allieviate PSU constraints. I've uninstalled/re-installed 6600GT card and molex power connector on card. My system specs are below:
Motherboard = ASUS Focus A7N8X-LA, BIOS=American Megatrend 3.07, Chipset = nVidia nForce2
MSI GeForce 6600GT 128 AGP
1Gb Ram
200Gb Maxtor 8mb buffer HD
ASUS E616P1 DVD-ROM
RICOH MP5240A DVD+RW
Enermax EG375P-VE SFMA PSU (has separate 12V rails)
Any suggestions as to what else to try? Getting ready to RMA this card.

Quote from: andysue on 23-February-05, 07:34:53
Thanks for that Crull.
I have just found this on a site it may help someone, I hope to get my replacement tomorrow I shall let you know how it goes.
Question
I just got a K8 series MB , and your A6600GT 128MB VGA , every time when I quit the 3D games ,
the system gave me a blue screen and then restart the system. I already update the VGA driver and MB
driver but no luck , what can I do?
Answer
If your system are WinXP + SP2 , We suggest you to disable DEP function.
Please follow below steps to disable the DEP. (See below picture)
1. First , Select “Advanced” under “System Properties”
2. Choose “Settings” under “Startup and Recovery”
3. Click “ Edit “ , then you can edit “boot.ini” file.
4. Change “/NoExecute=OptIn” as “/execute” (See below red square in step4)
5. Then save the boot.ini file and restart the system.
6. After rebooting , the DEP function will be disable.
Other information please see below link :
http://support.microsoft.com/kb/875352/en-us
http://www.sysinternals.com/ntw2k/info/bootini.shtml
http://www.microsoft.com/technet/prodtechnol/winxppro/maintain/sp2mempr.mspx
• /NOEXECUTE=OPTIN Enables DEP for core system images and those specified in the DEP
configuration dialog.
• /NOEXECUTE=OPTOUT Enables DEP for all images except those specified in the DEP
configuration dialog.
• /NOEXECUTE=ALWAYSON Enables DEP on all images.
• /NOEXECUTE=ALWAYSOFF Disables DEP.
Configuration Description
OptIn
(default configuration)
On systems with processors capable of hardware-enforced DEP, DEP is
enabled by default for limited system binaries and applications that
“opt-in,”
With this option, only Windows system binaries are covered by DEP by
default.
OptOut DEP is enabled by default for all processes. Users can manually create
a list of specific applications which do not have DEP applied using
System in Control Panel. IT Pros and Independent Software Vendors
(ISVs) can use the Application Compatibility Toolkit to opt-out one or
more applications from DEP protection. System Compatibility Fixes
(“shims”) for DEP do take effect.
AlwaysOn This provides full DEP coverage for the entire system. All processes
always run with DEP applied. The exceptions list for exempting
specific applications from DEP protection is not available. System
Compatibility Fixes (“shims”) for DEP do not take effect. Applications
which have been opted-out using the Application Compatibility Toolkit
run with DEP applied.
AlwaysOff This does not provide any DEP coverage for any part of the system,
regardless of hardware DEP support. The processor does not run in
PAE mode unless the /PAE option is present in the boot entry.
Yes let us know how it goes. Hopefully well.

K7T266 Pro2 with GeForce 4 MX 440

I recently upgraded from a VooDoo4500 PCI graphics card to the GeForce 4 MX 440 AGP card. I have read in message board posts that this GeForce card may not be compatible with my K7T266 (MS 6380) motherboard. I had difficulty in getting the new card installed, having never used an AGP card I was not familiar with what all needed to be done. I figured I had to change the "Primary Display Adapter" from PCI to AGP and did that. The card has been installed and the other one removed along with the old drivers. Part of the time I expreience no problems, games run fine and computer boots fine.
However, the other half of the time I cannot get the system to boot up until after 5 or 6 attempts, especially following a lockup that didnt enable me to Ctrl+alt+del. What usually occurs is the monitor doesnt turn on and I get a series of beeps and LED's. The beeps are 2, 8, 2, 1. The LED's light up 3 red with a green in the bottom right corner I believe. If I then power off the computer and boot again that may happen another time or I may experience the bootup hanging on "Checking NVRAM" or a bizarre lookinf black screen with random dots of different colors on it. At which point I power down and attempt to restart. Eventually the machine will boot, more often than not offering the option of starting in safe mode.
Steps I have done so far:
-updated VIA 4in1 drivers and AGP drivers
-downloaded latest drivers for the video card
-moved some PCI devices around in order to get the AGP card to share an IRQ with only "ACPI IRQ holder for PCI IRQ steering"
-searched for all old 3dfx drivers and removed them as well as removing old card from device manager in safe mode
-set primarly display adapter in BIOS to AGP instead of PCI
What I need to know is if this is a known conflict issue between this motherboard and video card or if it is a situation that can be fixed. If anyone could point me in the direction of some documentation on this matter I would be quite gratefu. If nothing can be done I will return the video card for a different one, of course preferring not to if this can be resolved. If anyone can suggest a comparable card that is known to work with my motherboard it would be most helpful in case I do need to return this one.
Any help would be greatly appreciated, as I have gotten no word back from the tech support for the video card. If I have to take back the card and get another one I have to do that within a certain time frame.
Thank you for your time.

I had the same combination & problem. I RMA'ed the motherboard to MSI. They made modifications to the board and sent it back. Video card worked. I recommend getting a TI series card. I got rid of my GF4mx440 & got a TI4200. Well worth it.

Msi 6528 and Geforce 4 mx 440 or hdd 80 Gb??

Hi people,
I've a terrible trouble: I've bought a Msi 6528 le with 512 sdram and an IBm 80 Gb hdd and a new asus geforce 4 mx 440. The system doesn't work and crashes or befor the os strt up or also in the bios mode. Sometimes appears on the black screen "Scan out of Range". What does it mean? Do you know about some incompatibility of any of each hardware pieces?
Please help me!

Sounds like a BIOS problem. Try selecting 'default settings' in BIOS to start with and take it on from there. What is your OS? Check all installations especially with your HDD/jumper setting- pins 1 & 2 and 7 & 8 positions for 16 Logical Head settings ( Device 0- Master ).
Your AGP card has to be 'enabled' in BIOS as well.
Check the other installed hardware like CD-ROM and CD-RW ect. Your PCI Cards as well.
If this does not work, then try the 'minimum' installation with just the HDD and Graphics card and see if you can boot to windows. I take t that your HDD is brand new with no data on it?
Good luck!

Problem with new MSI GeForce FX 5900

Just bought a new MSI GeForce FX 590 TD-128.
I removed previous drivers and video card, installed the new video card and attached the power cable, and booted my machine.
When I boot the machine I get no picture....just a blinking cursor in the top left hand side of the screen. I thought maybe it was a power supply issue (350W PSW), so I tried installing the video card in another machine with a 400W PSW. I get the same darn blinking cursor X(
Anyone have any ideas what causes this? Do I have a defective card?

Quote
Are both those boards AGP 3.0 ??
I have a Soyo Dragon K7V Dragon+ and a ECS K7S5A. The website for the Soyo board is:
http://www.soyo.com.tw/products/proddesc.php?id=37
It mentions a Universal AGP Pro Slot and support for AGP 1X/2X/4X...but no mention of AGP 3.0.
The ECS board is at:
http://www.ecs.com.tw/products/pd_spec.asp?product_id=192
and only mentions AGP 4X support.
Does the FX 5900 only work on the newer motherboards maybe?
Quote
If it doesn't work on any board then it might be bad, but 350w and 400w don't mean much so it's also possible you have a power problem.
Both power supplies are made by Antec. Seems unlikely that neither machine would even boot...but I've seen stranger things
Ideas?

MSI GeForce NX6600GT VTD AGP display problem

Hi!
I have MSI GeForce NX6600GT VTD AGP installed on ABIT NF-7S 2.0 (latest bios) with Athlon XP 2400+. Power supply 350W.
I had radeon 9200 running without problems, but if i install 6600gt, monitor goes on standby. It looks like monitor receives no signal from graphic card.
But computer boots normally - I can even log on to Windows! (log on sound from speakers when i enter password)
PS is rated 13A at 12V. Fan on 6600gt IS working.
Mark.

Hi!
Tried card in 2 different computers with same results. Seems that card was DOA
Mark.

Geforce 2 Mx400 has compatibility with AGP 8x?

I have a MSI Geforce 2 MX400 T64CS model MS-8826 Ver: 2.6
Can anyone tell me with it is a 1.5 volts card? With this card has compability with AGP 4x.
I search in the manual and the card but I didn´t find the voltage.
http://www.msi.com.tw/program/products/vga/vga/pro_vga_detail.php?UID=161
Any help is aprecciated.
Thanks.

Quote
I think you may find some 8x AGP cards will ONLY work in an 8x AGP slot and are not backwards compatible....
Can you name any examples? Seems stupid for manufactuers to cut out part of their product target audience.

MSI GeForce GTX 970 with MSI Z68A-GD55 (G3) motherboard

Hi!
I have seen a similar issue here that was resolved with the help of this forum. (https://forum-en.msi.com/index.php?topic=251322.0). I still want to ask my questons however, since I have a slightly different situation.
I recently bought a new Graphics card, a MSI GTX 970, to replace my older EVGA GTX 570. After installing it, the time it takes to startup the computer is quite a bit longer. The very begninning of the startup process is the part that takes longer, I see a black screen and "B2" in the lower right hand corner, with the older GPU this was seen for a few seconds but now it stays that way for about a minute. After that I see some random colors in stead of the MSI logo and then the regular "Starting Windows" image appears, from there the startup is as fast as before.
When the computer has started it seems to work perfectly, and the new graphics card is great, everything on "ultra" in games etc.
I guess the way to resolve this issue is to update BIOS. I am a bit afraid of this however, of the risk of destroying something.
What would be your suggestions? Is it better to update bios or to leave it as it is, since the computer works? Are the any risks with keeping this bios version, that seems to have some issue with the graphics card?
Any help would be greately appreciated!
/Johan
Board: MSI Z68A-GD55 (G3)
Bios: Version 23.7
VGA: MSI GeForce GTX 970 Gaming 4GB
PSU: Corsair TX 750W Modular
MEM: G.Skill Ripjaws X Performance 2x4GB
CPU: Intel Core i5-2500K Sandy Bridge 3.3GHz – not overclocked
System Harddrive: SSD 120GB Corsair SATA 2.5", Force 3 Series
Extra Harddrive: 1TB Samsung SP SATA-2* 7200RPM Spinpoint F3
OS: Windows®7 Home 64-bit
Cooling: Standard fans from the case (Fractal Design Define R3) and for the CPU plus one Scythe Slip Stream 140mm (1200rpm)

Ok, thanks for the advice.
I have started looking at the instructions and have downloaded the installer and the bios file. It seems Norton Internet Security has some problem with the installer. When I start the installer it reaches the point when it shows the current bios version, after that it is interupted by Norton. The reason that Norton gives is that it has found something called "Suspicious.Cloud.9.B" in the file b4.bks. How should I react to this?

MSI GeForce 4 MX 440 with AGP 8X - No Dual Display?

Similar Messages

Maybe you are looking for