MSI Geforce 8800GTX 768mb OC Edition memory bus
In the nvidia control panel the memory bus (Factory shipped clock frequencies setting) is set to 1000 instead of 2000! Core bus is normal to 610. I also realized that if i increase the memory speed it goes only up to 1200? Remember, this is the OC Edition! Any suggestions? (Drivers installed: 162.22 vista 64bit)
Quote from: flobelix on 20-July-07, 03:32:33
Well... NO! control panel shows real clock 1000mhz, that's 2000mhz effective ( 1000mhz DoubleDataRate = 1000 x 2 = 2000!). So don't worry everything's ok.
Thanks man!
Similar Messages
-
MSI GeForce FX5700 TD128(non Ultra) MEMORY BANDWIDTH
Hello to all...
I have 1 question please. I want to know the real memory bandwidth for MSI
GeForce FX5700 TD128(memory: Samsung). I found on MSI website this :
GeForce FX 5700 Graphics Core: 256-bit
Memory Interface: 128-bit
Memory Bandwidth: 14.4GB/sec.
Fill Rate: 1.7 billion pixels/sec.
Vertices/sec. 356 million
Memory Data Rate: 550 MHz
Pixels per Clock (peak): 4
Textures per Pixel: 16
RAMDACs 400 MHz
in MSI FX Series Quick User's Guide i found No. for memory bandwidth 8,8!!! GB/sec(MSI GeForce FX5700 TD128)
Quick User's Guide Version: 5.0, November 2003, G52-V1NFX07
Please remail and explain.
Thanks
TT14.4 is the bandwidth for the Ultra so I assume it isn't the same on the non ultra.
You can calculate it by finding the rated timing of the memory chips and therfore the memory clock (approximatly).
For instance 2.8ns (should be marked on the chip -28) is 1/2.8ns=357MHz.
Using DDR it is effectively 714MHz, and using 128bit wide BUS you get 11.4GB/S -
The MSI FX5900XT has a cut down memory bus?
According to MSI's VGA product list the MSI FX5900XT has only a 128-bit memory bus. Is that a typing mistake? --because the FX5900XT benchmarked on Tom's Hardware has a 256-bit memory bus.
Tony.It Must be a Typo, as there is No Way that NVIDIA would Let one of their Licensed Card Manufacturers even MSI, Cripple the Reference Design like that ......Chopping some Memory and Core Speed off of a Referece Card Design is one thing, But Changing the Whole Memory Pipelines Archetecture............Sean REILLY875
-
MOVED: MSI Geforce 8800GTX OC Edition drivers issue!
This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=109639.0Quote from: flobelix on 20-July-07, 03:32:33
Well... NO! control panel shows real clock 1000mhz, that's 2000mhz effective ( 1000mhz DoubleDataRate = 1000 x 2 = 2000!). So don't worry everything's ok.
Thanks man! -
Hi,
Could you please share GOP / UEFI Vbios for my gpu and provide some basic steps how to flash it?
S/N: 602-V284-46SB1307038723
Current vbios: h_ttps://docs.google.com/file/d/0B-oJKwAsft9FX1kzZTVnNlJjNkE/edit?usp=sharing
Thanks.Quote from: xmad on 05-October-13, 01:33:11
Are you able to use win 8 mode with onboard or unable to use the card at all?
Yes, and it boots instantly.
Quote from: xmad on 05-October-13, 01:33:11
Here is the latest bios for the mainboard as well:
https://forum-en.msi.com/index.php?topic=170132.msg1260345#msg1260345
Successfully flashed. But I'm getting to the same efi with win 8 enabled. Also Reboot function is not working now.. -
UEFI/GOP Vbios Request: MSI GeForce GTX 760 Gaming Edition
Hi,
Could anyone provide a Vbios for this card?
S/N: 602-V284-46SB1308052932
Bios Version: 80.04.BF.00.30 (P2004-0010)
link to the rom file: http:// rapidshare.com/share/C6DA660A30318BCD9047EBB239572C17
p.s. Is it safe to use NVFlash 5.142 for Windows on Windows 8.1 RTM, or is it better to flash it from dos?
All the best and keep up the good work.Quote from: xmad on 01-October-13, 02:28:39
Looks like you will need to contact MSI and see if there are any unlisted updates. The only UEFI bios for the 46s is the one Svet posted.
>>How to contact MSI.<<
Have you flashed the mainboard's bios to the most recent version?
I contacted MSI support team and here is the answer:
"sorry. MSI did not release that card(602-V284-46Sxxxx) UEFI BIOS, so we do not kown this BIOS GK104.rom if appropriate to your graphics card,so we suggest you update the original BIOS."
They do not wan't to help me because I haven't got the official version of uefi bios. How could that be even possible? Was the bios that you sent me the official one (from MSI) or the modified one?
-
MSI Geforce CTX 660ti Power Edition
Hi All,
I have been wondering if I should flash my Bios. I have A Windows 7 Ultimate 64bit OS.
How do I flash my bios without Svet? (Instructions)
Where do I get the software\rom to do so?
Thank youyou no need to flash it if you have no issues, you can check it with Live update
-
UEFI / GOP Request - MSI Geforce GTX 760 twin frozr gaming (OC edition)
Hi, see below for my card details.
Current Bios - 80.04.BF.00.30 (P2004-0010)
Serial number - 602-V284-260B1309018695
MSI GeForce GTX 760 TWIN FROZR OC Gaming Edition 2048MB GDDR5
Thanks in advance.There you go: https://forum-en.msi.com/index.php?action=dlattach;topic=173335.0;attach=12043
-
GOP / UEFI Request - MSI GeForce GTX 760 OC Gaming Edition
Hi, my card details are below.
Thank you in advance.
MSI GeForce GTX 760 OC Gaming Edition 2048MB GDDR5
S/N - 602-V284-46SB1308062573
Current Bios - 80.04.BF.00.30 (P2004-0010)Use this: https://forum-en.msi.com/index.php?action=dlattach;topic=174093.0;attach=12234
-
MSI GeForce 8800 Ultra OC Lock / Freeze ups
Hi, this seems to be a general problem not just with MSI, I'm reading exactly the same problems being experienced by other 'Ultra' users.
After 20 or so mins of play (mainly bf2 / COH / Far Cry for me) the card/display driver crashes, the screen flickers and sound pulses then ultimately Windows (XP) locks-up/BSOD's.
If I ctrl-tab quick enough I can go back into Windows and 2d is fine. If I then try and reload a game or any 3d app, it will immediately hang again, ie the only way to recover is to reboot.
The GPU temperature reported is fine around 80 degrees at time of crash.
However, I can run 3dmark2006 to my hearts content with no issue and the same with FSX.
I tried lots of different things, endless driver revisions (yes use Driver Cleaner 1st), re-installing games etc to no avail.
Increasing the GPU fan to 100% with Riva-Tuner has no effect but removing the side panel of my computer does result in no problem (strange eh).
Now from what I have read, it is a problem with the memory being overclocked too much at factory.
So as recommended by a poster to another thread, I reduced the factory 2300mhz memory speed down to 2200mhz and now I am running fine.
I have a large Thermaltake case with 4 system fans so cooling is not an issue. Having said that, even if I had no fans the card should still not crash as the product does not specify any special cooling requirements.
Has anyone else with this card experienced the same problem? Is it a driver issue, or a problem with this card that is known about by MSI? Or is the card faulty, should I send it back?
I reported the problem to my reseller after 1 day and they told me they would need the card for 7 days and send it back to MSI if they couldn't find a fault. I am not prepared to do that and if it is not fit for my purposes, shouldn't they offer me an instant refund even if they test it and it works for them. I know for a fact they won't pay someone to sit there playing bf2 for half and hour lol, they will more likely run 3dmark and then tell me card is fine, when it isn't (for me)!
Here are links to other people with similar issues:
http://forums.hexus.net/showthread.php?t=111126&page=1
http://forums.nvidia.com/index.php?act=ST&f=26&t=36798&st=0#entry221554
http://forums.hexus.net/showthread.php?t=110912
Thanks in advance for any words of wisdom.
Thermaltake Kandalf
MSI 8800 Ultra OC Edition
Enermax 620w Liberty
WD Raptor 10k 150gb / Hitachi 500gb
DVD Re-Writer
Abit Fatal1ty Sli
AMD 4200x2 (2200) + Freezer Pro
2x2gb OCZ DDR500 Platinum Edition
xfi eXtremeMusic
30" Dell LCDOMG THIS IS EXACTLY THE PROBLEM I HAVE!!
Ok sorry for caps. I have the exact same specs as elmes. I even had the exact same card as him previously x1900xtx from powercolor and it was rock solid for 1.5 years. I got the first MSI 8800 Ultra a couple of weeks ago and I launched EQ2 and lo and behold everything's great until I start seeing a weird black line flash in the middle of the screen every 20-30 seconds. Having had experience with problems like these I knew it was overheating or bad memory on the GPU or so I thought at the time. I have a ThermalTake Armor case with an 80mm fan custom mounted on the side blowing directly at the mobo and CPU, a Zalman 9500 on the CPU blasting the hot air across the case into the back exhaust 80mm, i've got a 40mm at the top of the case blowing the air out, 2 80mm front mounted blowing in and an extra exhaust 40mm in the back and the 80mm fan that comes side mounted on my OCZ GameXStream 700W PSU. So as you can tell the power and cooling is not a problem. Card runs 60c idle and max of 85c during ati tool artifact scan for 5 hours. (bosskiller could you please explain what combined PSU mode is exactly? i've never heard of that either, i have 2 PCI-E cables securely connected to the GPU).
So I launched CoH and same black lines, only worse. I then went on and downclocked the card to 635/2200 and surely enough all problems went away as far as the black line was concerned. So after poking around the net and ripping out a few hairs on my head for paying so much money for a buggy GPU, i decided to RMA it through Newegg. At the time I thought that maybe the box got damaged being shipped from CA to MA or I just got a bad card...
So I got a brand new 8800 last night, overnighted from NJ in fact. Box in perfect condition and everything inside....
I launch EQ2.....play for 30 minutes....no black lines...........WOW......n4_disp crash to desktop 5 min later..............
So sure enough I thought ok, don't panic....bad drivers.....uninstalled all of my nvidia drivers (I have an MSI P6N Diamond mobo too btw, had severe problems with software raid, SiL's running well now) and 162.18 release drivers....installed 158.22....same problem.
In an hour, the card started crashing in EQ2 every 5-10 minutes (and this was also at a particularly bad time as I was getting mauled by a lvl 57 epic djinn Al'zheri)....no black lines this time. So off I went and clocked it down to 635/2200 as I had the previous card, all problems vanished. Ran ATI tool artifact scan for overnight....all stable. Played EQ2 for an hour and a half this morning....all stable....
So now I'm certain that MSI 8800 Ultra is clocked too high. In fact go and take a look at the OC settings of other VGA manufacturers, MSI is the highest with the exception of XFX.
So either the QA team at MSI didn't do a proper job or 2 cards shipped from different locations with a 2 week delay in between happened to magically be bad. I'm gonna call Newegg today and see if I can exchange it for another brand.....
PC specs:
MSI NX8800Ultra-T2D768E-HD-OC GeForce 8800Ultra 768MB
MSI P6N Diamond LGA 775 NVIDIA nForce 680i SLI
Intel Core 2 Duo E6700 Conroe 2.66GHz LGA 775 (running at stock speed)
G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800
OCZ GameXStream OCZ700GXSSLI ATX12V 700W
Seagate 320GBx2 RAID-0 HD on SiL -
MSI Geforce 3 Ti200 Driver Updates for ME
Why can't the drivers be updated past 44.03 in Windows ME?
Multi-boot two operating systems
Abit KG7-Raid
AMD Athlon XP 1800+
512 MB DDR
MSI Geforce3 Ti-200 TD Pro:
MSI 44.03 drivers with Windows ME
Nvidia 52.16 drivers with Windows XP Pro
Creative Sound Blaster Audigy Gamer
Cambridge Sound Works FPS2000 Digital Surround Speakers
NEC 97F 19" Flat Screen Monitor
Linksys 10/100 Etherfast NIC
Maxtor 30 GB HD
IBM 10 GB HD
Yamaha CDRW
Microsoft Internet Keyboard Pro
Microsoft Intellimouse Optical
US Robotix 56K modem (until NOV. 20, 2003 when cable broadband available )
I run all my games on WME so that I have more RAM available for the game (XP is memory hog) and because my flight control setup (CH Force FX {14 programmable buttons}, CH Pro Throttle {20 programmable buttons}, CH Pedals) is not recognized in WXP.
I received HALO as a birthday gift. It loaded fine. I ran it and it continually locked up at the main menu screen of the game. The Audio part of the game continued to advance, but the video got stuck. My wife loaded the game and tried to run it and got the same results, she has only WXP for an OS on an MSI K7T 266 Pro 2 RU motherboard. She upgraded her MSI Geforce3 Ti-200 TD Pro drivers from MSI 44.03 to NVIDIA 52.16 and HALO then ran flawlessly.
MSI has upgraded drivers 45.32 and Nvidia has upgraded drivers 45.23. Both of these drivers locked up my machine each and everytime I installed them. My machine runs the NVIDIA 56.12 drivers without any problem on Windows XP PRO. I had to uninstall the MSI 45.32 and/or NVIDIA 45.23 drivers and reload the MSI 44.03 drivers to get WME to boot up. HALO will not run on the 44.03 drivers. One of the techs from microsoft called me at home the last two nights in a row to try and resolve this issue. Conclusion at end of night one was updated video drivers needed to be installed. Conclusion at end of night two was that there was a hardware problem with the the conclusion that video card was not accepting drivers above 44.03 for the Windows Millenium Edition Operating System. There was no listing at either NVIDIA or MSI video driver site for any drivers beyond 44.03 other than NVIDIA 45.23 or MSI 45.32 respectively.
The burning question is this: As with some of the previous NVIDIA drivers are the new releases compatible with all of the operating systems? I ask this because looking in the NVIDIA 52.16 drivers folder that gets extracted I see references in the read me file to W98,W98SE,WME. Why does the MSI Geforce 3 Ti-200 card accept the NVIDIA 52.16 drivers with WXP PRO and not the NVIDIA 45.23 not the MSI 45.32 drivers with WME (and I assume W98 & W98SE?)
Interested in the response.
Thanks.Judging from the problems I and several other people on the forum have mentioned, there seems to be a problem with the nVidia 45.23 drivers and video. I get a grey screen with vids unless i turn down the hardware accel to almost nothing. Other people can get vid to show on their tv out. So if you havn't tried an older driver version yet, maybe you could use the good old xp driver rollback in the video device properties.
-
MSI Geforce GTX 660 TF 2GD5/OC and Asus problems
Hi there,
just bought a MSI Geforce GTX 660 TF 2GD5/OC with and Asus M5A99X EVO R2.0 mainboard. Installed Windows 7 x64 without any problems. All the drivers work but when I try to install the Nvidia drivers it just says there isn't a compatible graphics card available. Upgrade my motherboards BIOS to 1708 which is the latest one. Still didn't make it work. Hope that anybody can help me because I want to start gaming!
Regards!Graphics: MSI Nvidia 660 TF 2GB DDR5
CPU: AMD FX-8350 8x 4GHZ L2 8MB L3 8MB
Display: Iiyama ProLite E2280HS-B1
Power supply: OCZ ZT750W
Case: Sharkoon T9 Value black edition
Optical drive: Samsung SH-224BB/BEBE
Input: Logitech MK710 WL Desktop
Mainboard: ASUS M5A99X EVO R2.0 6x USB2 2x USB3 6x SATA GB lan
Bios: 1708
Harddisk: Western Digital WD2002FAEX 2 TB
Memory: 2x G.Skill 8 GB DDR3-1600 Kit
OS: Windows 7 x64 -
MSI GeForce 210 not post in Sapphire A9RX480 mobo?!
This is a bit nuts. The MSI card is GeForce 210-MD512H:
http://www.msi.com/product/vga/N210-MD512H.html#?div=Specification%22
...witch is basicaly fanless budget MSI GeForce 210 with 589/1024MHz clocks and 512MB DDR2 ram. All in all a budget card to do the work required and that it is. I never expect playing Crysis on it... maybe SoF2... lol!
However I wanted to use it in my Sapphire "Grouper" A9RX480 mobo (that is ATI chipset RX480-450 for SB) and it refuse to post. When I plug there my old good PNY GeForce 7800, then (even w/o the external power cable connected - DOS only, true) everything seems working out nicely!
Now that is a bit insane. Any suggested bios settings to make the card work? The mobo is fine, memtest passed all tests and never had a problem with it...
Yes, it is claimed to be 16x PCIEx speed... shall I try 8x? Or what should I do? The card is also tested in another computer and it is working nicely there...!Oooops, I'm sorry. When way more powerfull and way more PSU demanding 7800 GTX works fine, then I never even mind that any other information is necessary, but whatever. Here we go:
Board: Sapphire A9RX480 "Grouper"
Bios: oldest and even latest official version available tried, even moded version: http://ax2.old-cans.com/grouper - still same problem!
VGA: MSI GeForce 210-MD512H ( http://www.msi.com/product/vga/N210-MD512H.html#?div=Specification )
PSU: Enermax 620W Liberty
CPU: Opteron 148
MEM: Mushkin Enhanced DDR400 PC3200 (can do 2-2-2-5 :D - memtest fine)
HDD: none
COOLER: Zalman CNPS 9500 Led
OC: none
OS: none
It is just a mainboard, PSU and floppy sitting on chair near monitor (Eizo F35 Flexscan) for testing... Nothing else.
Tried 8x settings in the PCIE Bus Width, no difference :(
Some BIOS settings are really interesting - how about these?
LTD Configuration - Enabled
Upstream LTD Bus Width - 16bit
Downstream LTD Bus Width - 16bit
LTD Bus Frequency - Auto (1GHz, 800MHz, 600MHz, 400MHz, 200MHz)
(I know, this have more to do with the CPU memory controler that GFX card, but who knows?)
PCIE GFX Core Payload Size - 64Bytes (32Bytes, 16Bytes)
PCIE GPP Core Payload Size - 64Bytes (32Bytes, 16Bytes)
NB-SB Port Configuration - Default (Enhanced)
PCI-E GFX Link Width - x16 (x12, x8, x4, x2, x1)
Assign IRQ For VGA - Enabled (Disabled)
...any suggestions? Tried 32Bytes (for the PCIE GFX Core Payload Size|PCIE GPP Core Payload Size settings), but no change. Eg. NO POST with this MSI card...
Additional info about the card: it is MSI GeForce 210-MD512H, on the PCB is near the heatsink and PCIE connector:
"V201" "VER: 1.1" and "Product of China" and near the "no trash" symbol is "D33008"
From the bottom side, there is a big letters "N1996" after a "Nike" checkmark and at the end of the PCB, some probably manufacture info:
APCB M3 94V-0
RU 0942 E230435
E129N4774BB
Bought the card from friend, who replaced it with faster one. Tried with another computer, where it worked just fine (IIRC Gigabyte mainboard, but not sure about it) ...
Is there any bios fix for this card that help me out? -
Gigabyte GA-8I945P-G + MSI Geforce 6800 GTO 256 PCE
My old MSI board went pop, i have sent it back to be replaced but will take a week or so, i purchased a new Gigabyte board GA-81945P-G and a new MSI Geforce 6800 GTO 256 PCE, the framerate i get is pityfull, i have checked everything in the bios, upgraded and downgraded drivers, Intel chipset drivers and everything i can think off, i read that this card is a properatry card and not ment for standard PC use, is this true ? does anyone else have or know of this issue and a fix or a resolve Please Please.
MarkMarkJames,
It took a lot of digging though all that info but I found it in the end:
Resource Share Device Description
DMA 02 Exclusive Standard floppy disk controller
DMA 04 Exclusive Direct memory access controller
IRQ 00 Exclusive System timer
IRQ 01 Exclusive Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
IRQ 03 Exclusive Communications Port (COM2)
IRQ 04 Exclusive Communications Port (COM1)
IRQ 06 Exclusive Standard floppy disk controller
IRQ 08 Exclusive System CMOS/real time clock
IRQ 09 Shared Microsoft ACPI-Compliant System
IRQ 11 Shared Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA
IRQ 12 Exclusive Microsoft PS/2 Port Mouse (IntelliPoint)
IRQ 13 Exclusive Numeric data processor
IRQ 14 Exclusive Primary IDE Channel
IRQ 15 Exclusive Secondary IDE Channel
IRQ 16 Shared Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB
IRQ 16 Shared Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D0
IRQ 16 Shared Intel(R) 945G/P PCI Express Root Port - 2771
IRQ 16 Shared Microsoft UAA Bus Driver for High Definition Audio
IRQ 16 Shared NVIDIA GeForce 6800 Series GPU
IRQ 18 Shared Broadcom NetLink (TM) Gigabit Ethernet
IRQ 18 Shared Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA
IRQ 18 Shared Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D4
IRQ 19 Shared Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9
IRQ 19 Shared Intel(R) 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller - 27C0
IRQ 23 Shared Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8
IRQ 23 Shared Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC
I really hate the way Intel bunches the IRQs together. If that Boardcom a PCI Card?
Take Care,
Richard -
Whats the REAL FX5500-T128 memory bus?
Hello everyone!
I already searched for the same question in the forum, finding several posts about it, and none of them is usefull, all have lies and insults, i just want the real information, without fanatisms. Im a proud user of a MSI K8N Neo Plat. so, im not going to bash MSI without a cause.
Here are the other posts i found:
GeForce FX 5500-T128
FX5500-T128 memory interface 64bits or 128??
I think the MSI lies: See the true 64 or 128 bits
Here an Admin posted a link
MSI GeForceFX 5600Xt-TD128 vs. GeForceFX 5500-T128
To the MSI USA site where MSI says NOTHING about the memory interface but he manages to QUOTE the site saying 64bit. Even when on the previous post everyone in the forum was saying the card has 128bit (except the actual owners of the cards --weird, eh?)!
Also, im going to quote the following statements:
Here, in the MSI MIAMI Site, it says the following:
http://www.msimiami.com/spanish/products/detail_spec/FX5500%20-T128_spa.htm
Quote
# Performance
# Core de Gráficos: 256 bits
# Interface de Memoria: 128 bits.
# Tasa de Llenado: 1.100 millones de téxels/seg.
# Vértices por Segundo: 68 millones.
# Píxeles por reloj (pico): 4.
# Texturas por píxel (máx por pase de rendering simple): 16.
# Dobles RAMDACs: 350MHz.
So, there is NO ONE who actually knows the real memory bus on this card?
This is the official MSI Forum! There should be at least one person from the company crawling around! I cant believe that a forum hosted on msi.com.tw has no one from the company to clear out things like this.
Also there is some that say the card with 4 memory chips are 64bit, well, this one has 4 memory chips if you have a good look at the picture on the site above.
Another thing that misleads me (and several people) is that MSI usually call the 64bit cards FX(gpu)-T(memory) while the 128bit are FX(gpu)-TD(memory) (although the D, I think is more related to the DVI thing).
I was about to buy this card, and im really pissed off with MSI for not being clear on what they are selling, im emailing them right now to see if they had an error on the site or whats going on.
I really hope no-one takes this post as offensive, but i find all this very confusing (not to say disturbing)elcuervito,
One way to find out exactly what you have is with RivaTuner. As an example, here is the portion data pulled on my Vid Card:
Quote
$ffffffffff ---------------------------------------------------
$ffffffffff ATI specific display adapter information
$ffffffffff ---------------------------------------------------
$0900000000 Graphics core : R420 (16x1)
$0900000002 Memory bus : 256-bit
$0900000001 Memory type : DDR SGRAM / SDRAM
$0900000003 Memory amount : 256MB
$0900000004 Core clock : 540.000MHz
$0900000005 Memory clock : 580.500MHz (1161.000MHz effecti...
$0900000006 Reference clock : 27.000MHz
$ffffffffff ---------------------------------------------------
Take Care,
Richard
Maybe you are looking for
-
Hi exports iam using software 3.1 Iam facing below issue ,while converting deski to webi reports Note : All my servers are up .. Is i need to enable any options in servers Thanks, Raghunath
-
Using a scalar user defined function in a select case statement
I have a simple select statement below and I want to have a case statement for some conditions based on the result of the udf returned value. I then want the returned value from that specific case statement to be returned where i have indicated 'DISP
-
Extending the duration of themes in iMovie
Does anybody know if/how I can lengthen the time a theme plays in iMovie? It's clear that I can shorten the duration, but what about lengthening it? Thanks!
-
Hi All, I was wondering if Apple ever fixed being able to import idvd 5 or 6 projects into DVDSP? The reason I really want to do this, is to use idvd's cool simple interface, but have the ability to use the better encoding in DVDSP... Also, what are
-
By mistake i deleted the "recently added" playlist
How do I get it back? I love that thing for organising everything when I have bought new albums