Msi geforce fx 5800 ultra

found a few pictures of msi geforce fx
http://www.watch.impress.co.jp/akiba/hotline/20030301/etc_gfxdemo.html

looks like pics will all most people will see of that card.
02/28/03 - nVidia lost MSI to ATI
nVidia estimates trimmed on large design loss. Friedman, Billings, Ramsey has learned that nVidia has lost a large design win at MSI (one of its largest customers) to ATI; firm now believes that other designs at MSI are at risk, given that they had been an nVidia-exclusive customer; additionally, firm believes nVidia's new GeForce FX line will ramp more slowly than expected due to low yields on both discrete and board-level products.
taken from
http://www.amdboard.com/

Similar Messages

A review for the MSI FX 5800 ultra

http://www.ukgamer.com/article.php4?id=227&page=1

Well I guess the word is out now:
Quote
We looked at MSI's Geforce FX 5800 Ultra, but from the information we have received from a number of trusted sources you might as well be looking at the Asus or PNY board. Why? Because all these manufacturers have stuck like glue to the reference design, and with NVIDIA making the PCBs for the 5800 Ultra units you probably won't see much difference in performance between the cards.
Take Care,
Richard

MSI K7N2-IL 2M/B and MSI MS-StarForce GeForce FX 5900 Ultra

Hi
I wonder if you could help me.
I am curious, the below is the spec of my machine.
AMD Athlon XP 3000 + 333 FSB CPU
MSI K7N2-IL 2M/B
256 GEFORCE FX 5900 ULTRA GRAPHICS
though the graphics card is reported as MSI MS-StarForce GeForce FX 5900 Ultra [Nividia GeForce 5900 Ultra] in Windows control panel.
I am needing to learn more about exactly what is what in this PC.
I have installed MSI Live monitor and have upgraded to NVIDIA nForce System Drivers though my graphic driver is still reported as 4.4.0.3 or 43.51 [another question why are there two versions given to graphic drivers?]
As Live monitor doesn't report any further updates possible when there are newer Nvidia drivers from the Nvidia website - can I install these ?
Also I am looking for a utility to monitor, change fan speed and temperature, is the Nvidia system utility ok to use? It says that it's only compatible with
nForce3 Pro
nForce3
nForce2
I'm not sure if I only have Nforce ?
I would really appreciate any help you may give - I know that the above probably sounds as if I'm as thick as 2 short planks.
Thanks in advance
~ The Doctor.

nVidia Drivers
you can get all your drivers there
both board drivers and vga
you can use speedfan for temp
http://www.almico.com/speedfan.php
boards hardware does not support changing fan speeds though

MSI K3 ultra 2 vs MSI GeForce FX 5200

My computer crashes all the time since i installed a new vga card (MSI GeForce FX 5200 TDR 128) on my MSI K3 ultra 2 main card. Os is XP pro.
I've got all the latest drivers etc...
Anyone with similar problems or sollutions to this
small problem?

psu ? is it the cpu
Her is all data:
MSI K3 ULTRA 2
MSI GeFORCE 5200 FX TDR 128
AMD ATHLON XP 2100 +
RAM 512 MB PC 2700 DDR 333MHz CL.2.5
RAM 512 MB PC 2700 DDR 333MHz CL.2.5
HD, WESTERN CAVIAR 80GB SE
XP PRO
Sorry power supply 340 W

MSI GeForce FX5700 TD128(non Ultra) MEMORY BANDWIDTH

Hello to all...
I have 1 question please. I want to know the real memory bandwidth for MSI
GeForce FX5700 TD128(memory: Samsung). I found on MSI website this :
GeForce FX 5700 Graphics Core: 256-bit
Memory Interface: 128-bit
Memory Bandwidth: 14.4GB/sec.
Fill Rate: 1.7 billion pixels/sec.
Vertices/sec. 356 million
Memory Data Rate: 550 MHz
Pixels per Clock (peak): 4
Textures per Pixel: 16
RAMDACs 400 MHz
in MSI FX Series Quick User's Guide i found No. for memory bandwidth 8,8!!! GB/sec(MSI GeForce FX5700 TD128)
Quick User's Guide Version: 5.0, November 2003, G52-V1NFX07
Please remail and explain.
Thanks
TT

14.4 is the bandwidth for the Ultra so I assume it isn't the same on the non ultra.
You can calculate it by finding the rated timing of the memory chips and therfore the memory clock (approximatly).
For instance 2.8ns (should be marked on the chip -28) is 1/2.8ns=357MHz.
Using DDR it is effectively 714MHz, and using 128bit wide BUS you get 11.4GB/S

MSI GeForce GTX 970 with MSI Z68A-GD55 (G3) motherboard

Hi!
I have seen a similar issue here that was resolved with the help of this forum. (https://forum-en.msi.com/index.php?topic=251322.0). I still want to ask my questons however, since I have a slightly different situation.
I recently bought a new Graphics card, a MSI GTX 970, to replace my older EVGA GTX 570. After installing it, the time it takes to startup the computer is quite a bit longer. The very begninning of the startup process is the part that takes longer, I see a black screen and "B2" in the lower right hand corner, with the older GPU this was seen for a few seconds but now it stays that way for about a minute. After that I see some random colors in stead of the MSI logo and then the regular "Starting Windows" image appears, from there the startup is as fast as before.
When the computer has started it seems to work perfectly, and the new graphics card is great, everything on "ultra" in games etc.
I guess the way to resolve this issue is to update BIOS. I am a bit afraid of this however, of the risk of destroying something.
What would be your suggestions? Is it better to update bios or to leave it as it is, since the computer works? Are the any risks with keeping this bios version, that seems to have some issue with the graphics card?
Any help would be greately appreciated!
/Johan
Board: MSI Z68A-GD55 (G3)
Bios: Version 23.7
VGA: MSI GeForce GTX 970 Gaming 4GB
PSU: Corsair TX 750W Modular
MEM: G.Skill Ripjaws X Performance 2x4GB
CPU: Intel Core i5-2500K Sandy Bridge 3.3GHz – not overclocked
System Harddrive: SSD 120GB Corsair SATA 2.5", Force 3 Series
Extra Harddrive: 1TB Samsung SP SATA-2* 7200RPM Spinpoint F3
OS: Windows®7 Home 64-bit
Cooling: Standard fans from the case (Fractal Design Define R3) and for the CPU plus one Scythe Slip Stream 140mm (1200rpm)

Ok, thanks for the advice.
I have started looking at the instructions and have downloaded the installer and the bios file. It seems Norton Internet Security has some problem with the installer. When I start the installer it reaches the point when it shows the current bios version, after that it is interupted by Norton. The reason that Norton gives is that it has found something called "Suspicious.Cloud.9.B" in the file b4.bks. How should I react to this?

[GeForceFX] Red lines on my GeForce FX 9950 Ultra

I have recently upgraded my Graphics card from a GeForce FX 5200 to a GeForce FX 9950 Ultra. I have had no problems with the 5200 model, but when i installed the 9950 card (which is HUGE!!!) the Loading up bios screen had red vertical lines all over it and when windows boots up it severly crashes and preforms a physical memory dump. The only way to get in to xp is to run from last good known settings but everytime it detects the new card and i install the latest drivers it crashes again. When i put my old card back in (the 5200 fx) the computer works fine??? I have a 650w PSW, the MSI KT6V motherboard, 1024 of ram, 2 X 80 GB hard disks, 2 dvd burners, and an Athlon 3000+ barton processor, and im a novice with computers. Can any one help???? Its it A faulty card or am i plane dumb??? Any help will be well appreciated!!

I went out and got a spanking new 650w PSU for this card when i relised that it needed an extra power surply to it. Im just gutted cos its going to cos me to send it back to the ebuyer. thanks anyway. i just needed conformation incase i was being stupid and missed something obviouse. Thanks for your time and effort.

Fast boot with MSI Geforce GTX970

Hi!
I just tried to enable Ultra fast boot in my ASRock UEFI,.. didn't work. I learned that I need a GPU which supports GOP. Does my GTX970 support this protocol by default? Do I need to flash a VBios?
S/N:602-V316-03SB1409025050
I have difficulties saving my bios with GPU-Z (version 0.8.0 and 0.7.9). It says: 'BIOS reading not supported on this device.'
But msi LiveUpdate says I'm using NV316MH.125.....I don't know if this is helpful.
Windows 8.1 64-bit
ASRock Z97 Extreme4
msi Geforce GTX970 Gaming 4G
Xenon E3-1231 v3
Thanks in advance.

GTX970 should supports GOP originally, so you don't have to flash VBIOS.
NV316MH.125 means it's a GOP VBIOS, if it is NV3XXMS.XXX means non GOP.

MSI GeForce FX5600-TD 256Mb Tv-Out, DVI

Hallo!
I have a AND XP 2000+, 512 DDR 266, MSI KT3-Ultra, MSI GeForce FX5600-TD 256Mb Tv-Out, DVI
and a 450W psu. Win XP Professional sp1
I have a problem with games and when i tested in 3dMark.
It's score bad.
3dMark2003: 2312
All drivers are up to date and i have tried to reinstall all components
Can Somebody help me Please? ;(

sorry but the only way you will improve your score is to lose the MSI FX6500. This is a renault 5 in ferrari clothing. It simply does not have the necessary fill rate to compete with even a Ti4200, trust me I spent 2 weeks trying to get it running to spec.
Basically only an Ultra or FX5900 will improve it.
Nvidia boobed on the design of the Graphics processor, the card can throw out frames well beyong a ti4200 capability but because it cant fill them quick enough it cant maintain the framerate.....still dont believe me ? Try thi, run 3d MARK, any version, in 640X480, youll notice that the score doesnt improve dramtically. 640X480 should mean more FPS but still no fill rate so it cant process any quicker.
I am well pi**ed of with my FX5600.

Problem with MSI Geforce FX 5200 & Westinghouse LCM-22W2

I've tried a bunch of different drivers and the highest resolution I can get displayed on this monitor is 1440x900. it's native resolution is one step higher, 1680x1050. Anyone have any ideas as to why my card refuses to display anything higher than this, even tho the latest drivers i have and all MSI's information specifically states that it should be capable of doing so?
Thanks,
-John

here's my specs - if i'm missing anything important let me know.
MSI KT3 Ultra ARU
Athlon XP 2100+ (overclocked, recognized as 2700+)
MSI Geforce FX 5200 VTD128
1 GB RAM
Win XP Home, SP2 completely up to date
The Nvidia drivers are version 6.14.10.9371 released on 10/22/06 - I had a newer version but they didn't fix any problems, at this point i'm honestly not sure why I went back to this version :P - I had the absolute latest version from Nvidia's site, which the release notes specifically stated supported the Non-traditional 1680x1050 resolution, and that the FX5200 was supported by these drivers. Still didn't work.
The GPU Bios is 4.34.20.23.08
Also, upon startup my system was kinda hanging and I would get a notice that SW20.exe had crashed. I disabled sw20.exe and sw24.exe from starting up when the PC did and have no problems. It's not liek I miss them, cus I never used the overclocking functions of the graphics card anyway.
Originally XP was recognizing my monitor as a "Plug and play" monitor. The manual says this:
"VESA Plug and Play eliminates the complicated and time-consuming installation process. Your computer system will identify and automatically adjust the LCD monitor. The LCD monitor uses Display Data Channel (DDC) to send Extended Display Identification Data (EDID) to the computer system, so the computer system can automatically adjust the LCD monitor."
Right now the monitor is running with a custom inf file that PowerStrip (Which I downloaded from a link I found here) created for it. Westinghouse has no drivers or anything remotely helpful on their website.
Also, I'm using a Dual-link DVI cable, the monitor also has a VGA input.
Link to my monitor's specs: http://www.westinghousedigital.com/details.aspx?itemnum=60

Halo geforce fx 5900 ultra 256 ddr

hi,
i'm having a big prob with this game trying to run it on my system :(.
each time i want to run halo on my pc, i get the following message : "Halo - Fatal error. Couldn't initialize direct3D accelaration. it may be disabled, pls run DXDIAG."
i've already done that and it is enabled and i've also ran the directX tests, and they are all fine, i have directX 9.0b...i've also reinstalled Halo, didnt solve the prob, also reinstalled detonator drivers, also didnt solve the prob...
what more can i do ?
msi 875p neo-fis2r
p4 2.6 Ghz (HT)
2x256 mb ddr400
80 gb sata-150
geforce fx 5900 ultra 256ddr

I also had problems with Halo. I downloaded the Det 52.13 beta drivers and everything works now. Also, Halo runs much much faster with these drivers. You can find them here:
http://www.3dchipset.com/drivers/beta/nvidia/nt5/5213.php

KT4V + Leadtel GeForce FX 5600 ultra = compatible?

Hi all,
I would like to know if the Leadteck A310 GeForce FX 5600 Ultra 128 Mo is compatible with a KT4V ver 1.0. The test report of MSI is rather short and does not mention any older card than a GeForce 4 Mx.
I am asking this, because she doesn't boot with a SUMA GeForce 4 Ti 4200 SE 64 Mo. And I mean, when I plug the card in the AGP port, everything is like if I unplug the power cable. I've seen another user on this forum, with the same problem (GeForce 4 Ti 4200 64Mo, but a Siluro), and no solution where found. Even with nothing on it (no proc, no ram, nothing), the card it booting. But as soon as I put the Suma, no reaction. I tried a Geforce 2 MX, and it works just fine.
Thanks in advance,
Freeman.

My power supply is a 350 W Enermax dual-fan (don't remember exactly the spec). My old KT3 ultra liked it and never complained about it
I've tried a Geforce 4 Ti 4200 SE 128Mo - 8X. It works perfectly. I really dont know why my old GeForce 4 Ti4200 SE 64Mo- 4X doesn't work. Usualy, when there's a compatibility problem, at least, the system boots (even if it hangs soon after). But here, with the old GeForce, not a move. not even a breath from fans.
So, I decided to buy a new graphic card = a FX 5600 Ultra. By the way, ATI offers more interesting card, but there are so many compatibility issues that I am afraid to try one... If enough people can assure me I will be safe with an ATI 9600 Pro on a KT4V, I may give it a try.

GeForce FX 5200 Ultra

I recently ungraded my mobo to a MSI 845GE Max. I also tried to install the PNY GeForce FX 5200 Ultra video card. I am running Windows 2000. When I try to install the drivers for the Video card, the system locks up on reboot and the login image is distorted. The PNY FAQs suggest upgrading the Intel chipset, which I have done. Still seems to be in conflict with the onboard vga controller. When I disable the onboard vga driver, the system locks needing a hard reboot. System runs great on the onboard graphics card, but I want to install a 3D card.
Does anyone have any suggestions? Thanks,

Hi gdiodati,
Try disabling your onboard VGA, then set your Init. Graphics Adapter Priority to AGP.
Set your AGP Aperture settings to 128MB or 256MB.
Set your AGP Capabilities to "Auto"
Make sure that its running on at least 4x(1.5v) or max 8x(0.8v).
Check if you've any other devices sharing IRQ with your VGA card.
All the Best... :D!!!

Is MSI Geforce FX 5200 T128 128 bit ?

hey guys,
please tell me is my Graphic card MSI Geforce FX 5200 T128 is 128 bit or not?

hey guys,
i wanted to ask if the basic FX 5200 is 64 bit then what will those VTD models of the FX 5200 do , it makes no sense either MSI FX 5200 is 64 bit Original and there are no 128 bits ok or it must be FX 5200 Ultra which i could not get cause it was not available only i could find was FX 5700 Ultra which was too expensive or the 5600 which was also expensive this was perfect but each model i found was 65 bit ??? why ?

MSI Geforce 3 Ti200 Driver Updates for ME

Why can't the drivers be updated past 44.03 in Windows ME?
Multi-boot two operating systems
Abit KG7-Raid
AMD Athlon XP 1800+
512 MB DDR
MSI Geforce3 Ti-200 TD Pro:
MSI 44.03 drivers with Windows ME
Nvidia 52.16 drivers with Windows XP Pro
Creative Sound Blaster Audigy Gamer
Cambridge Sound Works FPS2000 Digital Surround Speakers
NEC 97F 19" Flat Screen Monitor
Linksys 10/100 Etherfast NIC
Maxtor 30 GB HD
IBM 10 GB HD
Yamaha CDRW
Microsoft Internet Keyboard Pro
Microsoft Intellimouse Optical
US Robotix 56K modem (until NOV. 20, 2003 when cable broadband available )
I run all my games on WME so that I have more RAM available for the game (XP is memory hog) and because my flight control setup (CH Force FX {14 programmable buttons}, CH Pro Throttle {20 programmable buttons}, CH Pedals) is not recognized in WXP.
I received HALO as a birthday gift. It loaded fine. I ran it and it continually locked up at the main menu screen of the game. The Audio part of the game continued to advance, but the video got stuck. My wife loaded the game and tried to run it and got the same results, she has only WXP for an OS on an MSI K7T 266 Pro 2 RU motherboard. She upgraded her MSI Geforce3 Ti-200 TD Pro drivers from MSI 44.03 to NVIDIA 52.16 and HALO then ran flawlessly.
MSI has upgraded drivers 45.32 and Nvidia has upgraded drivers 45.23. Both of these drivers locked up my machine each and everytime I installed them. My machine runs the NVIDIA 56.12 drivers without any problem on Windows XP PRO. I had to uninstall the MSI 45.32 and/or NVIDIA 45.23 drivers and reload the MSI 44.03 drivers to get WME to boot up. HALO will not run on the 44.03 drivers. One of the techs from microsoft called me at home the last two nights in a row to try and resolve this issue. Conclusion at end of night one was updated video drivers needed to be installed. Conclusion at end of night two was that there was a hardware problem with the the conclusion that video card was not accepting drivers above 44.03 for the Windows Millenium Edition Operating System. There was no listing at either NVIDIA or MSI video driver site for any drivers beyond 44.03 other than NVIDIA 45.23 or MSI 45.32 respectively.
The burning question is this: As with some of the previous NVIDIA drivers are the new releases compatible with all of the operating systems? I ask this because looking in the NVIDIA 52.16 drivers folder that gets extracted I see references in the read me file to W98,W98SE,WME. Why does the MSI Geforce 3 Ti-200 card accept the NVIDIA 52.16 drivers with WXP PRO and not the NVIDIA 45.23 not the MSI 45.32 drivers with WME (and I assume W98 & W98SE?)
Interested in the response.
Thanks.

Judging from the problems I and several other people on the forum have mentioned, there seems to be a problem with the nVidia 45.23 drivers and video. I get a grey screen with vids unless i turn down the hardware accel to almost nothing. Other people can get vid to show on their tv out. So if you havn't tried an older driver version yet, maybe you could use the good old xp driver rollback in the video device properties.

Msi geforce fx 5800 ultra

Similar Messages

Maybe you are looking for