MSI GeForce GTX 560Ti "Twin Frozr II" crash at 50 degrees Celsius

I get artifacts (pink squares all over screen) in heaven benchmark, fluid benchmark and gta 4, a few seconds later I get a black screen and then an error message there windows tell me the driver has crash but praise msi it was successfully recovered. All this then the card is nearing 50 degrees Celsius.
I have:
MSI GeForce GTX 560Ti "Twin Frozr II", (BIOS: 70.24.0a.00.00)
Gigabyte GA-890GPA-UD3H, Socket-AM3
AMD Phenom II X4 965 Black Edition
Corsair Powersupply 650W Black,ATX/EPS
Corsair XMS3 DDR3 1600MHz 4GB CL9
Windows 7 64bit (with sp1)
DC OUTPUT +3.3V +5V +12V -12V +5Vsb
MAX LOAD 24A 30A 52A 0.8A 3A
I tested driver on msi site and the latest nvidia driver, even tested some beta driver. All give the same result as stated above. I also tested to set the clocks at reference speed but no go. Also tested voltage at 1025.

Got a new card today, same card but new.
No problems now, seem the new card has newer bios and lower core voltage. Maybe that is a way to fix it, just upgrade bios.

Similar Messages

MSI nVidia GTX 560ti Twin frozr III loss of output

Hi folks,
I recently needed my monitor to test another rig and upon plugging it back in I discovered my MSI nVidia GTX 560ti Twin frozr III no longer has video output, I have tried different outputs, different cables, different displays and different motherboard slots to no avail. Had a search around and couldn't find any other instances of this. The card is 2 years old now but has always functioned perfectly (apart from the well publicised memory temperature problem). Any ideas what might be causing this issue?
Regards,
hotrats
Specs:
Windows 7 PRO SP1 64bit
AMD FX-8350 8 Core Black Edition Processor 4.57gHz OC
ASUS M5A99X EVO Motherboard R2
MSI nVidia GTX 560ti Twin frozr III
Corsair Vengeance 2x4GB DDR3
Thermatake 750W Evo_blue 2.0
I'm assuming drives and case aren't the issue so not listing them.

The card is 2 years old, but how long wasn't it used for and did you ever had any problems with it?
First of all, I would reset CMOS >>Clear CMOS Guide<< so all the OC is removed (write down settings of CPU OC if you want to use it later on).
Then (I don't know Asus boards) would look through the BIOS if it recognises the card. Possible you should get rid of the possible dust in PCIe slot?
Also: while card is plugged in, run computer and: try all the video ports, even those on motherboard (maybe board doesn't recognise the card and wants to run integrated gpu if there is any).
Last but not least: ask a friend/colleague if you can test your card in their computer. Best if it would be different brand of motherboard, and power supply. Possibly power supply is screwed up somewhere (broken connection)and doesn't deliver enough power to give output.
Does the card start up when you run the PC (fans of the card)?

MSI GeForce GTX 770 Twin Frozr - 4GB noicey fan

Hey.
I have more or less just gotten me a MSI GeForce GTX 770 Twin Frozr - 4GB but i have found that when the fans hit around 60% PWM then one of them is starting to make alot of noice like its a old uesed fan.
do any one know what this comes by and maybe how to fix it..
i did contact the shop where i did buy it and they told me it had to be send to germany to be checked... taking that it might take up to 20 working days and do to im uesing my computer to work from then its hard to just take the card out and sit back waiting to what will happen and have no income the next 20 days ....
What To DO..

Welcome to world where products are not good enought tested before sell.
I had problem with one not working fan in msi 270x and i wait 2nd week to pay mine money back.

MSI Geforce GTX 580 Twin Frozr II Reference?

Hey I gotta few quick questions. Thanks
Is the MSI Geforce GTX 580 Twin Frozr II a reference design PCB underneath the cooler?
And do the military class components get in the way of other custom cooler E.g. A waterblock?

Quote
Is the MSI Geforce GTX 580 Twin Frozr II a reference design PCB underneath the cooler?
yes it is
Quote
And do the military class components get in the way of other custom cooler E.g. A waterblock?
You can check Hydrogen version: http://msi.com/product/vga/N580GTX-HydroGen-OC.html

UEFI / GOP Request - MSI Geforce GTX 760 twin frozr gaming (OC edition)

Hi, see below for my card details.
Current Bios - 80.04.BF.00.30 (P2004-0010)
Serial number - 602-V284-260B1309018695
MSI GeForce GTX 760 TWIN FROZR OC Gaming Edition 2048MB GDDR5
Thanks in advance.

There you go: https://forum-en.msi.com/index.php?action=dlattach;topic=173335.0;attach=12043

MOVED: MSI GeForce GTX 580 Twin Frozr II OC and official drivers from nVidia

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=145978.0

Quote from: Grunwaldt on 12-March-11, 05:57:19
Don't want to look dumb, but I have no idea on how to flash from an USB key, could I burn a CD ISO and do the same? Also what are the exact settings of the bios posted in that thread you just told me? I might only need to set voltage to 1013, everything else seems correct.
Quote
Don't want to look dumb, but I have no idea on how to flash from an USB key,
Quote from: Svet on 25-February-11, 07:32:33
Hi pacnow,
Re flash the card which comes with 823MHz with BIOS attached below.
How to:
Create a USB key bootable
How to make USB key bootable: http://www.bay-wolf.com/usbmemstick.htm
Then get attached file, and extract & copy all files nvflash.exe, CWSDPMI.EXE and 103.rom
to the USB key.
Then reboot the computer and boot from the bootable USB key,
when you see A:\ or C:\ type:
nvflash.exe -b old.rom [ENTER]
Wait process to finish, this will backup/save your current VBIOS.
Then flash the new VBIOS with:
nvflash.exe -4 -5 -6 103.rom [ENTER]
Wait process to finish, then reboot the machine and you're done
Quote
lso what are the exact settings of the bios posted in that thread you just told me?
defaults for your card:
http://eu.msi.com/product/vga/N580GTX-Twin-Frozr-II-OC.html

Geforce GTX 570 Twin Frozr III PE/OC and BSOD

Hi,
I have an MSI Geforce GTX 570 Twin Frozr III PE/OC which appears to be causing system instability (graphical corruption upon boot i.e before windows), and BSOD. It typically occurs from a cold boot resulting in BSOD after the Windows logo. This will occur 2-3 times. The system then runs stably.
I have tracked this problem down to this card when running at x16 mode in my primary PCIe slot (slot 2, x16_1) on my motherboard. It does not occur if the card is in slot 5 (x16_2) where it only runs at x8 speed (2.5Gb/s rather than 5Gb/s). This does not occur if I place a borrowed Geforce GTX 260 in the primary PCIe slot (it runs at x16 fine and causes no such system instability).
I have tried out various mobo BIOS updates, checked all my system files, updated (and rolled back) my NVIDIA drivers, and checked my memory for errors with Memtest 86+. I cannot find any updates to my video card BIOS.
Can I assume the card is faulty, or does anyone have any other possible solutions?
Spec is:
Windows 7 64-bit
Intel I5-2500K
Asus P8Z68V-Gen 3 mobo
8Gb Corsair DDR3 1800 mem
MSI Geforce GTX Twin Frozr III PE/OC
Cheers!

Quote
Its a Corsair 750TX V2 (750 watt). I am also running 1 SSD, 2 hard drives and a blue-ray optical drive. You don't think its too much for the PSU do you?
The PSU its plenty enough
Quote
No I haven't tried it on another computer and I don't think its very likely I'll get the chance.
there is not much options then, except to RMA the card and to hope the problem to be there.
[else the problem will remain]

MSI GTX 560Ti TWIN FROZR II 1GB GDDR5

Currently I'm experiencing a problem where no matter what I'm doing, whether it is gaming or browsing, green/orange chequered squares appear exactly as in the picture below:
The problem lasts for a matter of seconds and then windows informs me that the drivers have recovered from a failure. This is very remininsant, but not identical, to when I had a 9800GT that died. This issue has only started within the last month and the card is over 6 months old. Is this likely to be a GPU issue?
M4N72-E Windows 7 64 Bit Phenom II X4 950 3.0Ghz
Kingston Hyper-X 1066Mhz CL5 8GB @ 800Mhz CL4
MSI GTX 560Ti TWIN FROZR II 1GB GDDR5
Inno3D GT240 512MB GDDR5 iChill
Sony AD-7240S 24x DVD±RW DL & RAM SATA Optical Drive - OEM Black
Seagate ST3500418AS 500GB Hard Drive SATAII 7200rpm 16MB Cache - OEM
Thermaltake 500W PSU

Sadly I've no way of testing the card in another PC or a different PSU.
What is the likelihood that it is the PSU even though the card has been performing flawlessly for almost a year? Also I could understand if it was causing artifacts just when gaming due to power load, but it happened when I was merely surfing the net, where power draw doesn't even reach 300W.
Is a known solution to this issue an increase in Watts or is there a chance that it is a problem with the GPU?

GTX 560Ti Twin Frozr II Artifacts problem

Hey guys,
i am getting weird artifacts with my card i have flashed all two bios provided by svet but still no good, it happens randomly but it happens most when i turn off the game or decrease load on graphic card.I have already sended my card to msi earlier but they sent me the same card again and told me it will work now but it is not working. any helps please
My specs
Core i7 3770K
Asus Maximus Gene V
8gb 1866 gskill ddr3 ram
MSI GTX 560ti Twin frozr II oc
I have CM 600watt power plus psu but i changed the psu to cm thunder 600w and still getting this problem.
Tried Everything different drivers,different bios, but i borrowed Sapphir ATi 4870 from my friend and it worked perfectly but this card is giving a real hard time.
This is what i am getting all the time and sometimes bsod Plz help me

flobelix
The artifacts are at random time sometimes it even shows on when i am just on desktop doing nothing, but these days it normally comes up when the card is on full load or about to get more load.Tested on 1333 mhz as well same result and i7 is running on default frequency 3.5 normal and 3.9 Turbo.
Svet
I have got this maximus gene V mobo 2 days ago its new brand i am also having this same problem in my previous mobo.Tried like 10-15 drivers ranging from msi site to nvidia offical site and still got this same problem.
and btw thank u so much svet for giving me your valuable time.its really good to have u in msi ^^

Problem with GTX 560Ti Twin Frozr II OC SLI

Hi. I just bought another GTX 560 Ti Twin Frozr for SLI and when I ran BF 3, the images are shaky. Here's my specs:
i7 920 2.66GHz
Asus P6T
6 x 2GB Corsair 1600 DDR3
2 x GTX 560Ti Twin Frozr II
1TB Seagate Barracuda 7200
Windows 7 Pro 64bit
Cooler Master Silent ProM 850W
I'm using the 290.36 beta driver (the others failed as well).
My motherboard BIOS is the latest version (1408). My GPUs have different BIOS (I bought the first in Feb and the new one today), is that the issue? The problem isn't just in BF 3, I also have it in Skyrim.
Thanks!

Quote from: Keno117 on 12-December-11, 03:15:23
hi svet. yeah, the problem doesn't appear with fraps screen shots.
this mean that issue is caused by your monitor. [or sli brigde issue]
have you tested each vga alone?

[solved] MSI GeForce GTX 560Ti

Ok, I'm sorry to make my debut on this forum a cry for help, but here it goes.
Just bought a MSI GeForce GTX 560Ti as my old card said goodbye with flickering colors and Code 43 error.
Uninstalled the old drivers, removed the old card, slotted in the new one, powered up and was hoping for the best. The result? Nothing.
Nothing but beeps from the BIOS (2+8), and a screen who wont react at all. Just goes off in to power saving mode.
Any ideas?
EDIT: I'm so stupid, I should have been required to carry a license. Problem solved by myself.

Quote from: haalbe on 08-September-11, 03:16:43
EDIT: I'm so stupid, I should have been required to carry a license. Problem solved by myself.
How? Someone might make the same error and your solution may help.

MSI GTX 560Ti twin frozr II OC high Temperature after RMA

Hey guys,
I have an MSI GTX 560ti Twin Froz II OC card which was giving me weird artifacts on desktop and many random places so i send the card to rma.They replaced it with a same model MSI GTX 560ti Twin Froz II OC card but since i got this card i am getting very high temperatures like it reaches 90-95 C in 10 minutes and keep rising with fan speed 100% in games like Dota 2,Grid 2 and many other games so is there anything i can do to solve this problem.
My Nvidia Driver Version- 320.14 i have even tried 320 but the same result.
My Gpu Screenshot
My bios file https://hotfile.com/dl/225315714/b7fd67b/GF1.html
Any bios upgrade might help?

its showing me the same version i have checked using nbitor.What do u think can be the problem of temperature rising so fast nearly 90+ in 1 min any guesses? cause my old 560 was working perfectly should i go and rma again?

VBIOS with GOP/UEFI support for Geforce GTX 760 TWIN FROZR

Hi,
please provide a GOP/UEFI VBios for the GTX 760 TWIN FROZR
S/N: 602-V284-300B1309103551
NVFlash report:
NVIDIA Firmware Update Utility (Version 5.165)
Adapter: GeForce GTX 760 (10DE,1187,1462,2847) H:--:NRM B:01,PCI,D:00,F:00
The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
Identifying EEPROM...
EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
Reading adapter firmware image...
IFR Data Size : 1112 bytes
IFR CRC32 : 8B7DF729
IFR Image Size : 1536 bytes
IFR Image CRC32 : 114B182D
IFR Subsystem ID : 1462-2847
Image Size : 99328 bytes
Version : 80.04.C4.00.30
~CRC32 : 1A372C64
OEM String : NVIDIA
Vendor Name : NVIDIA Corporation
Product Name : GK104 Board - 20040010
Product Revision : Chip Rev
Device Name(s) : GeForce GTX 760
Board ID : E115
PCI ID : 10DE-1187
Subsystem ID : 1462-2847
Hierarchy ID : Normal Board
Chip SKU : 225-0
Project : 2004-0010
CDP : N/A
Build Date : 06/04/13
Modification Date : 07/30/13
UEFI Support : No
UEFI Version : N/A
UEFI Variant Id : N/A
UEFI Signer(s) : Unsigned
Sign-On Message : GK104 P2004 SKU 0010 VGA BIOS (HWDIAG)
MSINV284MS.350
Thanks

Use the attached vbios.
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

My Geforce GTX 760 Twin Frozr is running at 3000RPM constantly. Please Help!

Hello, for some reason my new MSI GeForce GTX 760 2GB Twin Frozr Gaming Edition graphics card keeps running at 100% (3000 RPM) and for some reason I cant change it. When I hook it up to the PSU outside of the case its so quiet which is what I need, but as soon as I put it in the PCIE slot it gets really loud. I'm not even doing anything on my pc and it will still be loud. This is my first build and I dont know much about computers please help me. Thank you.
My motherboard is Asus B85-Plus

Quote from: Svet on 10-December-13, 22:44:37
install VGA drivers from msi web for your card, then test again
http://www.msi.com/product/vga/N760-TF-2GD5-OC.html#download
Unfortunately its still not working

GTX 560ti Twin Frozr II - Dual Screen Issue + Silent fan speed

Hi, sorry for my bad english :p
CPU : Intel 2500k
Ram : 2x2go Ripjaws 1600mhz
Mb : Asus P8P67-M Pro
GPU : 560 gtx ti twin frozr II
EPU : Corsair 520w
1 - DUAL SCREEN
My first problem is that i can't use a true extended monitor configuration (1 dvi + 1 vga, 1920*1080 + 1280*1024).
Dual monitor work in CLONE MODE but not in extended.
Extended mode use 1 monitor or turn to clone mode automatically :/
EXCEPT after a NEW driver installation. So if i want to use dual screen extended mode, i have to reinstall driver each time i boot...
I have use DriverSweeper in safe-mode but this trick don't work for me. I have the last nvidia driver 270 and i have try the 270 beta driver too.
Into game? That work fine (except some artifacts who appear occasionnaly (one time in metro 2033 and one time in battlefield bad company 2) but it's not fine for a new gpu i think :/)
Can you help me to fix that dual screen problem?
2 - SILENCE
My second problem is that i want a silent computer but the fan are too noisy.
Live Update don't find update for my vga bios (currently at 70.24.0A.00.00)
The SN is : 602-V238-16SB1101159115
Here is a link to my BIOS version extract with GPU-Z : http://skarzag.free.fr/bazar/GF114.bin
I don't know if it can help you :p
Thanks for you're help!

there will be a Tool for it avaiable on donation soon at: https://forum-en.msi.com/index.php?topic=148273.0

MSI GeForce GTX 560Ti "Twin Frozr II" crash at 50 degrees Celsius

Similar Messages

Maybe you are looking for