MSI GeForce4 Ti-4200 128M 8X software

Here is the deal. The card install went well. MSI driver installs, but the MSI info and Clock tabs are inop. Upon selection, I get an error message, app .... .dll error
and when i install the MSI live update it shows an VBIOS.dll error and will not run at all. The 3D Desktop application is also inop, crashes browser instantly. Is this software compatible with Windows XP home SP1? If I have to go in and delete dll registry entries, than I have defeated the purpose of the software/card package. That is the reason I chose MSI over Asus.
The card benchmarks well, and works very well with the Nvidia detonator drivers. Leads me to believe that this a software problem. ?(
Windos XP sp1, DX9, Compaq motherboard, Athlon 1.2Ghz, Volcano 7+ cooling, 400W P/S, 448 M of 133Mhz Ram.
All help will be appreciated. 8)

SiSoftware Sandra
Computer System
Name : COMPUTER
User Name : default
Logon Domain : COMPUTER
Processor(s)
Model : AMD Athlon(tm) Processor
Speed : 1.20GHz
Model Number : 1334 (estimated)
Performance Rating : PR1759 (estimated)
L2 On-board Cache : 256kB ECC synchronous write-back
Mainboard and BIOS
Bus(es) : AGP PCI USB
MP Support : No
System BIOS : Compaq 786K1
Mainboard : Compaq 06E4h
System Chipset : VIA Technologies Inc VT8363/5 KT133/KM133 System Controller
Front Side Bus Speed : 2x 100MHz (200MHz data rate)
Installed Memory : 448MB SDRAM
Memory Bus Speed : 1x 100MHz (100MHz data rate)
Video System
Monitor/Panel : Philips 107S (107S2)
Adapter : NVIDIA GeForce4 Ti 4200 with AGP8X
Physical Storage Devices
Removable Drive : Floppy disk drive
Disk Drive : QUANTUM FIREBALLlct15 30
CD-ROM/DVD : CREATIVE CD5233E-N
CD-ROM/DVD : PHILIPS CDRW2412A
Logical Storage Devices
1.44MB 3.5" (A:) : N/A
Hard Disk (C:) : 25.2GB (8.9GB, 35% Free) (NTFS)
Hard Disk (D:) : 2.7GB (584MB, 21% Free) (NTFS)
CD-ROM/DVD (E:) : N/A
CD-ROM/DVD (F:) : N/A
Peripherals
Serial/Parallel Port(s) : 1 COM / 1 LPT
USB Controller/Hub : NEC PCI to USB Open Host Controller
USB Controller/Hub : NEC PCI to USB Open Host Controller
USB Controller/Hub : NEC PCI to USB Enhanced Host Controller (B1)
USB Controller/Hub : VIA Rev 5 or later USB Universal Host Controller
USB Controller/Hub : VIA Rev 5 or later USB Universal Host Controller
USB Controller/Hub : USB Root Hub
USB Controller/Hub : USB Root Hub
USB Controller/Hub : USB Root Hub
USB Controller/Hub : USB Root Hub
USB Controller/Hub : USB Root Hub
USB Controller/Hub : USB Printing Support
USB Controller/Hub : Generic USB Hub
USB Controller/Hub : Logitech USB Camera (Pro 3000)
USB Controller/Hub : USB Composite Device
Keyboard : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
Keyboard : HID Keyboard Device
Mouse : PS/2 Compatible Mouse
Human Interface : HID-compliant consumer control device
Human Interface : HID-compliant device
Human Interface : HID-compliant consumer control device
Human Interface : HID-compliant device
Human Interface : HID-compliant device
Human Interface : HID-compliant device
Human Interface : HID-compliant device
Human Interface : HID-compliant device
Human Interface : USB Human Interface Device
Human Interface : USB Human Interface Device
MultiMedia Device(s)
Device : SoundMAX Integrated Digital Audio
Printers and Faxes
Model : Lexmark Z22-Z32 Series
Model : Lexmark Z22-Z32 Color Jetprinter
Operating System(s)
Windows System : Microsoft Windows XP Home Ver 5.01.2600 Service Pack 1
Network Adapter(s)
Networking Installed : Yes
Adapter : SMC EZ Card 10/100 PCI (SMC1211 Series)

Similar Messages

Msi KT3 MoBo / MSI geForce4 TI 4200 Problem

Hello, hopefully someone can help me. I am having a rather unusual problem. Least I think it is. I have a MSI kt3 ultra2 motherboard, 512 meg ddr 2100 crucial ram. AMD XP 2000+ CPU and an MSI Geforce4 TI4200 video card. First of all, what agp settings should i use? 4x? 2x?. Secondly, should i enable agp fast writes? And last, what are the other 2 settings in the agp setup in the bios which are like 1/2 or 2/3?
I also ran mad onions 3d mark 2001 SE and got a score of 4898! This seems a little low to me. Comparing online, I should be getting scores rannging from 9000 to 13000. I have installed Nvidia Detonator drivers but they are the latest beta drivers. Are these bad drivers? None of my games ever freeze except for Soldier of Fortune 2. It slows way down and when i ctrl+alt+del, it says i am using 100% cpu usage. Can anyone help me? I just want my system i bought a week ago to run at its full potential and have nowhere else to turn.

I am using Windows XP Pro. I am running the 3d Mark 2001 SE with a 1024 resolution and no AA. I am also using a 32bpp color depth. The defaults when you load the program up for the first time basically. I never did get a patch for SOF II although I should have. Man do I fell like such a n00b.
Hey Jamie B, you said i should "disable support for advanced cpu controls is NOT checked". Where is that at?
Thanks to all who have replied. :D I appreciate it.

MSI GeForce4 TI 4200 MOD# MS-8870

Hi All ,
I'm wondering if my G4 TI 4200 ; Mod # MS-8870
is a 1.5 v vid card or 3.3 v ? Thank you in advance
for your time and input.
Bo Rong

BoRong,
It also depends on your mobo, if your mobo supports max 2x AGP, then it'll run at max 2x(3.3v) only, if your mobo can support anything from 2x to 4x, it will run at either 2x(3.3v) mode or 4x(1.5v) mode, depending on how you set your AGP mode in BIOS and display properties or if your mobo supports 4x/8x, it will run at 1.5v 4x mode only.
All the Best... :D!!!

Kt4v w/geforce4 ti 4200

I have a kt4v via kt400 chipset based MSI board that I purchased 2 weeks ago online. I have had nothing but problems and I believe the problem is with the MB.
With the MB I purchased an AMD 2400+ CPU plus 333Mhz 2700 DDR Ram. I have a GeForce4 TI 4200 64mb AGP Video card installed.
I first tried installing windows 2000. During the install I get a Blue Screen stating that ACPI support is not available on this MB and I have to install without ACPI support to continue. In an attempt to fix it I updated the bios to 1.6. This caused MANY many lock-ups. When I backed-off to 1.5 things seemed to work better but what I did notice was that w2k sp 3 made things a whole lot worse (know that I formated my computer about 10 times and re-installed trying the many combinations)
Then I tried Windows XP Prof. It doesn't, error it just hangs during the text part of the install. If I disable ACPI support in the bios it installs, but I believe this is a feature that is requried and advertised. Now that I have XP installed (bios level is still at 1.5 plus ACPI is disabled) I still have problems. At what appears to be random intervals the screen will goto about 320x200 resolution and then thick white verticle lines within blocks appear all over the screen and eventually the computer is completely locked (sorry, this is hard to explain).
Initially, I would believe this to be a video card problem, BUT here are my reasons for thinking otherwise. 1. The ACPI problem that still exists makes me think this board is flawed ?? 2. I have owned this card for 6 months and used in my last computer without incident.
Sorry for the long question but I wanted to show that i've tried many different scenarios before resorting to this.

OK, I have run memtest on my computer with no errors.
I found on another thread that I may have a bad video card, but that doesn't explain why I can't install an OS with ACPI enabled.
Is there anyone out there who can help ?
THANKS SO MUCH IN ADVANCE.
Stosh

MSI GeForce4 TI4200 8X 128MB - PC Internal Speaker

My HW :
ASUS P4S8X (+512 DDRAM)
INTEL P4 2400+
MSI GeForce4 TI4200 8X 128MB
My problem is that when playing :-) D3D games, the PC internal speaker makes BEEPS continously with irregular intervals.
No problem with MS office applications .
No problem with DVD .
The motherboard BIOS is updated .
The VGA driver is too ( version 4107 ) .
I don't want to cut off the PC speaker .
Can anyone help me to resolve this problem ?
Thnxs in advance.

Quote
Originally posted by wonkanoby
lowvoltage warning software,something along those lines?
ASUS Probe 2 says :
CPU temperature = 38C/100F (status OK)
MB temperature = 34C/93F (status OK)
CPU Fan = 2322 (status OK)
+12V = 12,032 (status OK)
+5V = 5,08 (status OK)
+3.3V = 3,056 (status OK)
When warning (beeps with regular interval = about 500ms), the sound comes from the external speakers and I can see the "alert" in the history .
My problem is that these BEEPS comes from the internal speaker, and it sounds like this = 5 beeps in one second, two seconds nothing, 3 beeps in one second, long silence, then it starts again.
This drives me grazy.

Msi geforce4 mx 460 locking up pc, help!

here is what i have:
asus cuv4x mb, 667 mhz intel celeron, 256 mb ram
msi geforce4 mx 460
diamond pci sound card
some isa 10/100 card
windows xp pro
this is a fresh install of win xp, i tried the drivers on the msi cd, also the newest reference drivers from nvidia.com, that didn't help. i tried removing the sound card but no luck there. it mainly locks in games like GTA3 or NHRA Dragracing. it runs for about 30 seconds and locks. ctrl alt del doesn't work so i have to power down. it locks in windows also, but not as often. i don't see anything conflicting in my device manager. does anyone have anything i can try? thanks in advance!

oops, i must be a moron. under the 3.3v and 5v it says 120w, then under all the voltages (3.3v, 5v, 12v, -5v, -12, -9) it says 250w. so just to verify, i need one that has 200w with the 3.3v and 5v? or is it ok now? sorry...
Quote
Originally posted by wonkanoby
you need 200 plus watts 3.3 and 5 v combined with an
xp gf4 combo,im surprised it booted to be truthfull
with only 120 watts
get a better psu that states combined over 200 watts and 3.3 amps about 30

MSI nVidia GeForce 4200 TI driver problem

Hi.. I really need your help guys..
First of all, I have Windows XP Pro.
Okay, I have this MSI nVidia GeForce 4200 TI card, and wanted to change drivers.
I had 50.xx, and wanted to change back to 40.xx, because it works better with Counter-Strike.
So, I went into Device Manager and went into the video card properties -> driver.
I pressed the 'Uninstall driver', because you need to uninstall the newer driver if you want to install an older driver.
Then my computer restarted, and when it was booting, a blue screen or something came up, with text about my computer was deleting and scanning some files(?).
I don't know what it was uninstalling excatly, but when I got into Windows I had to use a 'VGA driver' or something..
I tried to install the 40.xx driver, double clicked the Setup.exe but when it was begining to install this error came up: 'An error occured while launching the setup. (0x80040702)'.
I don't know what it means, but I can't install any drivers for nVidia?!
I tried the Device manager, and I can't update the 'VGA' ..
It's like my computer isn't recognizing the card or something.. I've tried 'Add new hardware' and everything.
Please help me!
Thanks in advance.
P.S. My PC specs:
Intel Pentium4 2.0GHz
Some IBM mainboard
512DDR
GeForce 4200 TI
Windows XP Pro

Generally for nVidia drivers for the VGA, is what I explained above by going to Add Remove programs in control panel and look for the entry for nVidia display drivers.
Since you are asking me this, I fear you may not be at the experience level required to do this as it can be somewhat of a nightmare if all the drivers are not removed completely. This is what you just experienced.
Look at the top of this forum and you will se an Important thread called driver cleaner, by Bonz and then the one above it by me. Go to the DriverHeaven Website and download the DC utility but make sure you read EVERYTHING and understand it before you proceed. If you are confused or not comfortable, then I suggest finding someone that is experienced enough to do it for you.
It should be pretty straightforward.
Good luck

MSI GF4 Ti 4200 VIVO ???

I'am f@#%ing tired this now! I read from hexus.net that MSI GF4 Ti 4200 64Mb has Full VIVO function but no mention about it in the box ! But my Ti420065Mb has no VIVO !!! Why ??? Please EXPLAIN !!! X( When i install nvidia capture drivers the video capture device wont install !!! and i think because i havent it !!!!!
AARRGGHH !½
Bad English SORRY

Link
Now I'm confused. ?(

Msi GeForce 4 4200 frame rate locked at 60 with Windows 2000

Lost here..... I have an MSI Geforce 4 4200 120MB Video Card slotted on an Asus A7V motherboard - AMD Thunderbird 1Ghz processor with 640mb of ram.
There is a common problem with the Nvidia chip and Windows 2000 in regards to a lock frame rate at 60fps within games.
I've tried several programs to fix this i.e. "Refresh Lock", "Windows 2000/XP Nvidia Refresh rate lock", "PowerStrip 3.15" and "NVFresh Tool 1.0"
But nothing seems to work. I'm sure these program work with older Nvidia cards but not with GeForce 4.
Any Ideas? I even turned the Vsync off and on.
HELP!

p-fulla, I'm not to sure about your system and Windows XP but check out these tweeking sites.
GEFORCEZONE.COM
http://www.geforcezone.com/
and
TWEAKED.NET
http://www.tweak3d.net/
TECHTV.COM/SCREENSAVERS
http://www.techtv.com/screensavers/
(A little advice: If you can, dump XP and install a copy of Windows 2000 second edition. They both have the same KERNAL but I find that Win 2000 is much more compatible for now. I give XP 2 more years before it's the OS for all. I've reinstalled 6 systems with Windows 2000 because of compatibility problems.)

MSI GF ti 4200 - picture not sharp

Just bought a new MSI Gf4 Ti 4200 8X / 128 MB (MS-8894) .
Works fine but seems there are some problem with the graphic quality .....
The picture quality seems not as sharp as my ASUS GF 3 Ti 200. The MSI picture seems a bit blur compare to my ASUS which is christal clear. This picture refer to window desktop background.
Run 3D Mark and score 11,297 ... seems ok for a P4 2.66 machine......
Does anyone out there know what went wrong with my MSI graphic card ???

I dont know exactly what is your problem?
But if other OS is OK, this pretty much a driver issue.

Msi g4 ti 4200 td8x

have just bought msi g4 ti 4200 td8x
can anyone tell me if its ok to run the g4 ti 4200 on a 4xagp motherborord ---reason is i have 2 other mobos i would like to use the g4 ti 4200 on
msi 845 ultra c and msi 845e max2
the manual says its 4x/8x but in brackets is says g4 ti series 8x only
emailed msi and got nowhere any help would be appreciated

Quote
Originally posted by wonkanoby
they are 4x and 8x ,make sure boards at least agpx 4
thanks both mobos are 4x only
didnt want to break my new g4 ti 4200 :P

What kind of TV-Out is on the 64MB Version of the MSI Geforce4-Ti4200?

It´s very important for me:
What kind of TV-Out is on the 64MB MSI Geforce4-Ti4200? And what kind is on the 128MB Version? (The same?)
Thanks
Bloody Judge

The hub is not compatible. It sounds like the unit is powering the link to the TC.. which would cause the TC to freeze up. You might need a special USB cable which has just data connection but no power.
It is really hard to get info on hubs that work.. particularly because there are so many around and many are changed .. eg if you buy a belkin this year it fails when last years one worked.. that is because all the manufacturer is farmed out to various factories in China who use .. the cheapest parts available today to build them.. next week it could be different.
The TC just doesn't have a huge amount of memory to store drivers for every USB under the sun. So some work some don't. The best I have found is the cheapest brand x USB2. I would not bother with USB3 since that chipset is even more unlikely to be supported than USB2 ones.
I have tried to get people to add to a database.. not much so far.
https://discussions.apple.com/thread/5912861?tstart=0
Appreciate anyone who takes the time to add their experience.

Built-In TV Tuner in MSI Geforce4 MX460-VTP ?

I notice that MSI Geforce4 MX 460-VTP has TV-Encoder Philip 7108. People also claim that after the installation of Capture driver, the Device Manager also shows these 4 devices in Sound, Video & Game Controller :
- NVidia XP WDM Audio Capture
- XP WDM Crossbar
- XP WDM TVTuner
- XP WDM Video Capture
As I also have Leadtek WInfast TV2000-XP, it also installed these 4 devices. Does it mean that the card already has a TV Tuner function on-board and I can get rid of the Leadtek TV200-XP card ?
However, I remember correctly that the spec for this card doesn't mention anything about TVTuner function.
Can anyone explain ?

Hey there,
I've got exactly the same setup.
Using the MSI geforce 4 4600 and a Winfast XP/2000 TV Tuner
Huge Problems...like I can't get the Winfast card to work.
The system recognizes it and installs the Winfast version WDM drivers. Great right?!?!?! ,
Well after installing the Winfast APP (newest version), I get no TV?!?!
I can't remember exactly where the problems started.
But at one point, my system worked perfectly.
I think it may have something to do with either installing the WDM drivers on the MSI CD or Windows XP Pro.
I've emailed Leadtek support and they couldn't find a solution. So they've asked me to RMA the card.
Some other things to note.
After removing the card and all instances of the drivers and app. I still get errors in my event viewer...all saying that the device is not present. No !!!
If you know how to get rid of the errors...please enlighten me.
Does your setup work?!?!?!

MSI GeForce4 Ti4200 128MB refresh problem

Hi all!
I have following WinXP refresh problem:
When I set refresh rate to value bigger than 75Hz, system tells me that refresh rate was changed, but my monitor still shows me 75 Hz.
My HW configuration:
Athlon XP 2000+
ABIT KD7 (VIA KT400 chipset)
MSI GeForce4 Ti4200 128MB
IBM DeskStar 45GB 7200 rpm
17" AOC 7GLr
I have tried various graphic card drivers (both drivers that were on CD supported by MSI and downloaded detonators from nVidia), for my monitor i have correct drivers from AOC. I was able to set refresh rate to 100Hz using PowerStrip 3.3. In SiSoft Sandra Professional i found warning, that i should use PnP/DDC compatible monitor or video adapter.
Guys from AOC support told me, that problem is probably in my graphic card.
Can you help me?
Thanks in advance. :(

I experienced the same problem with a new msi 440mx VTD (8x). I tried the latest detonator drivers (41.07 and 41.09) and could not get more than 75Hz refresh in any resolution, though the configuration told me it was 85Hz. In Monitor Inf my Iiyama MT-9017T has the specs 96kHz and 55-160Hz, that used to give me 1024x768@100Hz with my old graphics adapter.
my configuration:
Athlon XP 1600+
Epox KTA3pro (KT133a)
WIN2000

MSI GeForce4 Ti4600-VT2D8X advice?

MSI GeForce4 Ti4600-TD8X 128MB,
MSI GeForce4 Ti4600-VT2D8X
MSI GeForce 4 Ti4200-VTD8X
What's really the difference?
I'm trying to figure out which of these cards to get.
I'll be using it with 3DSMAX for open gl.
and video input /output for various projects.. I'll need at least 704x 480 resolution at real time playback/capture.
Has anyone tried using this card with these?
3dsmax
Maya
Premiere
Combustion
Avid
Any advice or info would be greatly appreciated
Waqas
[email protected]

Quote
When I just touch the video card a little with the power off (without removing at all), it gets back normal when I restart...
The pins on the monitor cable maybe bent. Can you try another monitor.
Could be something loose somewhere on card maybe? Bad solder somewhere etc. When card warms up it can lose connection.
What are the Power Supplies. Can be the root of alot of problems exp with Gf4 (make and wattage of PSU can be the difference of it working or not)
Bluesky. I'm not familier with grounded AC plug. Does this have three wires, or is it a separate wire???

MSI GeForce4 Ti-4200 128M 8X software

Similar Messages

Maybe you are looking for