MSI GeForce4 Ti4600-VT2D8X advice?

MSI GeForce4 Ti4600-TD8X 128MB,
MSI GeForce4 Ti4600-VT2D8X
MSI GeForce 4 Ti4200-VTD8X
What's really the difference?
I'm trying to figure out which of these cards to get.
I'll be using it with 3DSMAX for open gl.
and video input /output for various projects.. I'll need at least 704x 480 resolution at real time playback/capture.
Has anyone tried using this card with these?
3dsmax
Maya
Premiere
Combustion
Avid
Any advice or info would be greatly appreciated
Waqas
[email protected]

Quote
When I just touch the video card a little with the power off (without removing at all), it gets back normal when I restart...
The pins on the monitor cable maybe bent. Can you try another monitor.
Could be something loose somewhere on card maybe? Bad solder somewhere etc. When card warms up it can lose connection.
What are the Power Supplies. Can be the root of alot of problems exp with Gf4 (make and wattage of PSU can be the difference of it working or not)
Bluesky. I'm not familier with grounded AC plug. Does this have three wires, or is it a separate wire???

Similar Messages

MSI Geforce4 TI4600 Voltage

I just installed 1 MSI TI4600 from my old mobo to new MSI KT6 board but sometimes it gives me fuzzy screen or won't boot into the window xp. I read about similiar problem with TI4600 about the voltage or AGP slot connection problem.
I just bought 1 Antec True 550W psu for my comp and i think that should be enough for my system. or not?
Could anyone tell me what's the voltage to set in the bios for my AGP?
Current voltage for my ti4600 is 1.7V.
Thanks~

well~ i set that 1.7V myself

MSI GeForce4 Ti4600

On the back of this card is a ps/2-like s-video connector. I have a Phillips 14" television with the three pinouts on the front (Audio L, R, Video). Is there a lead that enables me to connect my gfx card to the tv and use it as a sort of playstation, and if i do connect it will it wreck my TV or Gfx Card?.
Thank for reading ?(

firstly you wont break your card or tv. I think the connection PS/2 look a like is called CVBS and its similar quality to scart. You can get adapters that will convert CVBS to S-Video so you could do that and then get a S-video lead to link the tv to the card, or if you want better quality get a CVBS to scart, provided you have a scart on the back of your tele. it doesnt look as good as on the pc monitor because the res of the tv is so low but its quite good for dvds.
hope that helped. :]

Problem with Geforce4 Ti4600 AGP4X

well I tried searching the forums but I couldn't find a thread that pertained to my problem :/, so: I have the MSI Geforce4-Ti4600 AGP4X card, but when I use it I see lines running down my monitor. The picture is still there (sometimes), but there are vivid lines of color that run vertically on the screen maybe a centimeter wide. So right now I'm using my GF2 ULTRA, but I was thinking that if I couldn't get any help on here I'd go ahead and return the card on warranty...and by the way could someone explain to me how that works? Thanks for any help.
-Josh

First, make shure you have a good and strong power supply. GeForce 4 tends to draw a lot of power. Adding two 1 GHz CPUs, although Intel P-III, doesn't make the burden easier... I wouldn't go for anything less than 300 W, and preferably 340 W or even more. Also be aware that not all so called 300 W PSU's are equally strong. Chieftec makes good PSU's, I would probably recomend their 340 W for this system, unless you have many hard disks or CD's, in which case I would choose an even more powerful PSU.
If possible, you should also test the graphics card in another computer, just make shure the PSU is strong enough for the GF4.
Best regards
Quote
Originally posted by aeigis
hi there!
Can anyone tell me if anybody had experienced any problem using a Geforce4 ti4600 in 694D Pro2 MS-6321 with dual 1Ghz 133mhz cpu.
I have upgraded from MSI Geforce3 to Asus Geforce4 ti4600 ultra deluxe and during the POST, I see 12 white blocks on the screen and then on the win2k startup there are 12 blue blocks afterwards the system hangup.
I have asked for a Geforce4 replacement and my dealer told me that I have to make sure that MSI is compatible with the new VGA card.
Is this possible? I do not have any problem with my old Geforce 3 which is almost the same as with Geforce4.
Help needed before I put the new board in. ?(
Aeigis

Major GeForce4:ti4600 problem

Hey everyone, I just bought the MSI Geforce4:ti4600 "champion Edition" video card and i have a huge problem. I uninstalled the drivers from the old video card i was using. and shutdown to install the new card. i installed it and boot up. when i got to the windows 2k screen i get alot of nasty artifact blocks with static going through some of them. i've read through a few threads about this problem but no one seemed to know the answer to the problem.
after i installed the drivers i figured it would be fine after that. was i wrong. it still gave me the same nasty blocks everywhere and it would not even go past the windows 2k start up screen. it would just give me a blue screen of death very quickly and restart. i looked in the BIOS to see if everything was fine and it was. here are my system specs: Abit KG7 mobo
AMD Athlon XP2000+
256mb 2100DDR micron ram
sound blaster x-gamer 5.1
10/100tb nic
windows 2k sp4
350W PSU
+3.3V 14A
+5V
+12V
+5VSB
hope you guys can help, thanks!

Well i just bought a new PSU for my PC and I'm still having the same problems with the video card. X( I think it's time to call MSI for an RMA. this sucks. i was hoping i would not have to do that. now i have to wait til after i move out next week to replace the card. this is my first time upgrading my vid card in over 2 years and i end up with a lemon. :(
well here are the new PSU specs.
3.3v= 28A---\_____220W
5v= 30A-----/
12v= 15A

694D Pro2 with Geforce4 ti4600

hi there!
Can anyone tell me if anybody had experienced any problem using a Geforce4 ti4600 in 694D Pro2 MS-6321 with dual 1Ghz 133mhz cpu.
I have upgraded from MSI Geforce3 to Asus Geforce4 ti4600 ultra deluxe and during the POST, I see 12 white blocks on the screen and then on the win2k startup there are 12 blue blocks afterwards the system hangup.
I have asked for a Geforce4 replacement and my dealer told me that I have to make sure that MSI is compatible with the new VGA card.
Is this possible? I do not have any problem with my old Geforce 3 which is almost the same as with Geforce4.
Help needed before I put the new board in. ?(
Aeigis

First, make shure you have a good and strong power supply. GeForce 4 tends to draw a lot of power. Adding two 1 GHz CPUs, although Intel P-III, doesn't make the burden easier... I wouldn't go for anything less than 300 W, and preferably 340 W or even more. Also be aware that not all so called 300 W PSU's are equally strong. Chieftec makes good PSU's, I would probably recomend their 340 W for this system, unless you have many hard disks or CD's, in which case I would choose an even more powerful PSU.
If possible, you should also test the graphics card in another computer, just make shure the PSU is strong enough for the GF4.
Best regards
Quote
Originally posted by aeigis
hi there!
Can anyone tell me if anybody had experienced any problem using a Geforce4 ti4600 in 694D Pro2 MS-6321 with dual 1Ghz 133mhz cpu.
I have upgraded from MSI Geforce3 to Asus Geforce4 ti4600 ultra deluxe and during the POST, I see 12 white blocks on the screen and then on the win2k startup there are 12 blue blocks afterwards the system hangup.
I have asked for a Geforce4 replacement and my dealer told me that I have to make sure that MSI is compatible with the new VGA card.
Is this possible? I do not have any problem with my old Geforce 3 which is almost the same as with Geforce4.
Help needed before I put the new board in. ?(
Aeigis

Geforce4 Ti4600 Problem

hey all i just got a geforce4 ti4600 from a buddy as few days ago and i went to install it, started up windows (xp pro) and installed the newest drivers from msi and rebooted. When windows went to loadup it compleatly froze and i was unable to starup windows again unless i put my old card back in. any help would be much appriciated.
my specs are:
P4 2.4ghz
intel mobo
350 watt powersupply
windows xp pro
soundblaster Live! 5.1
Thanks in advance,
Dark Hound

my power supply is acctually 300 watts
it says +3.3v and then 5.0v i think then combind 180w then another bunch of numbers like that then combind 280w
hope that helps
Dark

Msi geforce4 mx 460 locking up pc, help!

here is what i have:
asus cuv4x mb, 667 mhz intel celeron, 256 mb ram
msi geforce4 mx 460
diamond pci sound card
some isa 10/100 card
windows xp pro
this is a fresh install of win xp, i tried the drivers on the msi cd, also the newest reference drivers from nvidia.com, that didn't help. i tried removing the sound card but no luck there. it mainly locks in games like GTA3 or NHRA Dragracing. it runs for about 30 seconds and locks. ctrl alt del doesn't work so i have to power down. it locks in windows also, but not as often. i don't see anything conflicting in my device manager. does anyone have anything i can try? thanks in advance!

oops, i must be a moron. under the 3.3v and 5v it says 120w, then under all the voltages (3.3v, 5v, 12v, -5v, -12, -9) it says 250w. so just to verify, i need one that has 200w with the 3.3v and 5v? or is it ok now? sorry...
Quote
Originally posted by wonkanoby
you need 200 plus watts 3.3 and 5 v combined with an
xp gf4 combo,im surprised it booted to be truthfull
with only 120 watts
get a better psu that states combined over 200 watts and 3.3 amps about 30

Msi KT3 MoBo / MSI geForce4 TI 4200 Problem

Hello, hopefully someone can help me. I am having a rather unusual problem. Least I think it is. I have a MSI kt3 ultra2 motherboard, 512 meg ddr 2100 crucial ram. AMD XP 2000+ CPU and an MSI Geforce4 TI4200 video card. First of all, what agp settings should i use? 4x? 2x?. Secondly, should i enable agp fast writes? And last, what are the other 2 settings in the agp setup in the bios which are like 1/2 or 2/3?
I also ran mad onions 3d mark 2001 SE and got a score of 4898! This seems a little low to me. Comparing online, I should be getting scores rannging from 9000 to 13000. I have installed Nvidia Detonator drivers but they are the latest beta drivers. Are these bad drivers? None of my games ever freeze except for Soldier of Fortune 2. It slows way down and when i ctrl+alt+del, it says i am using 100% cpu usage. Can anyone help me? I just want my system i bought a week ago to run at its full potential and have nowhere else to turn.

I am using Windows XP Pro. I am running the 3d Mark 2001 SE with a 1024 resolution and no AA. I am also using a 32bpp color depth. The defaults when you load the program up for the first time basically. I never did get a patch for SOF II although I should have. Man do I fell like such a n00b.
Hey Jamie B, you said i should "disable support for advanced cpu controls is NOT checked". Where is that at?
Thanks to all who have replied. :D I appreciate it.

What kind of TV-Out is on the 64MB Version of the MSI Geforce4-Ti4200?

It´s very important for me:
What kind of TV-Out is on the 64MB MSI Geforce4-Ti4200? And what kind is on the 128MB Version? (The same?)
Thanks
Bloody Judge

The hub is not compatible. It sounds like the unit is powering the link to the TC.. which would cause the TC to freeze up. You might need a special USB cable which has just data connection but no power.
It is really hard to get info on hubs that work.. particularly because there are so many around and many are changed .. eg if you buy a belkin this year it fails when last years one worked.. that is because all the manufacturer is farmed out to various factories in China who use .. the cheapest parts available today to build them.. next week it could be different.
The TC just doesn't have a huge amount of memory to store drivers for every USB under the sun. So some work some don't. The best I have found is the cheapest brand x USB2. I would not bother with USB3 since that chipset is even more unlikely to be supported than USB2 ones.
I have tried to get people to add to a database.. not much so far.
https://discussions.apple.com/thread/5912861?tstart=0
Appreciate anyone who takes the time to add their experience.

Built-In TV Tuner in MSI Geforce4 MX460-VTP ?

I notice that MSI Geforce4 MX 460-VTP has TV-Encoder Philip 7108. People also claim that after the installation of Capture driver, the Device Manager also shows these 4 devices in Sound, Video & Game Controller :
- NVidia XP WDM Audio Capture
- XP WDM Crossbar
- XP WDM TVTuner
- XP WDM Video Capture
As I also have Leadtek WInfast TV2000-XP, it also installed these 4 devices. Does it mean that the card already has a TV Tuner function on-board and I can get rid of the Leadtek TV200-XP card ?
However, I remember correctly that the spec for this card doesn't mention anything about TVTuner function.
Can anyone explain ?

Hey there,
I've got exactly the same setup.
Using the MSI geforce 4 4600 and a Winfast XP/2000 TV Tuner
Huge Problems...like I can't get the Winfast card to work.
The system recognizes it and installs the Winfast version WDM drivers. Great right?!?!?! ,
Well after installing the Winfast APP (newest version), I get no TV?!?!
I can't remember exactly where the problems started.
But at one point, my system worked perfectly.
I think it may have something to do with either installing the WDM drivers on the MSI CD or Windows XP Pro.
I've emailed Leadtek support and they couldn't find a solution. So they've asked me to RMA the card.
Some other things to note.
After removing the card and all instances of the drivers and app. I still get errors in my event viewer...all saying that the device is not present. No !!!
If you know how to get rid of the errors...please enlighten me.
Does your setup work?!?!?!

MSI GeForce4 Ti4200 128MB refresh problem

Hi all!
I have following WinXP refresh problem:
When I set refresh rate to value bigger than 75Hz, system tells me that refresh rate was changed, but my monitor still shows me 75 Hz.
My HW configuration:
Athlon XP 2000+
ABIT KD7 (VIA KT400 chipset)
MSI GeForce4 Ti4200 128MB
IBM DeskStar 45GB 7200 rpm
17" AOC 7GLr
I have tried various graphic card drivers (both drivers that were on CD supported by MSI and downloaded detonators from nVidia), for my monitor i have correct drivers from AOC. I was able to set refresh rate to 100Hz using PowerStrip 3.3. In SiSoft Sandra Professional i found warning, that i should use PnP/DDC compatible monitor or video adapter.
Guys from AOC support told me, that problem is probably in my graphic card.
Can you help me?
Thanks in advance. :(

I experienced the same problem with a new msi 440mx VTD (8x). I tried the latest detonator drivers (41.07 and 41.09) and could not get more than 75Hz refresh in any resolution, though the configuration told me it was 85Hz. In Monitor Inf my Iiyama MT-9017T has the specs 96kHz and 55-160Hz, that used to give me 1024x768@100Hz with my old graphics adapter.
my configuration:
Athlon XP 1600+
Epox KTA3pro (KT133a)
WIN2000

MSI GeForce4 TI4200 8X 128MB - PC Internal Speaker

My HW :
ASUS P4S8X (+512 DDRAM)
INTEL P4 2400+
MSI GeForce4 TI4200 8X 128MB
My problem is that when playing :-) D3D games, the PC internal speaker makes BEEPS continously with irregular intervals.
No problem with MS office applications .
No problem with DVD .
The motherboard BIOS is updated .
The VGA driver is too ( version 4107 ) .
I don't want to cut off the PC speaker .
Can anyone help me to resolve this problem ?
Thnxs in advance.

Quote
Originally posted by wonkanoby
lowvoltage warning software,something along those lines?
ASUS Probe 2 says :
CPU temperature = 38C/100F (status OK)
MB temperature = 34C/93F (status OK)
CPU Fan = 2322 (status OK)
+12V = 12,032 (status OK)
+5V = 5,08 (status OK)
+3.3V = 3,056 (status OK)
When warning (beeps with regular interval = about 500ms), the sound comes from the external speakers and I can see the "alert" in the history .
My problem is that these BEEPS comes from the internal speaker, and it sounds like this = 5 beeps in one second, two seconds nothing, 3 beeps in one second, long silence, then it starts again.
This drives me grazy.

MSI GeForce4 mx440 TV-OUT HELP needed :)

Hello ! i need help :(
TV-out don't wanna work on MSI GeForce4 mx440 V.card :( i can activate "clone" mode or any other..why ?
and how can i do that ?
info:
PIII 1ghz, Intel
Win 2k prof.
m. board - Intell D815eea
help plz :"(

Privet ! vse gorazdo proshe chem kajetsya
sdelay tak chto srabotalo 100%
virubi komp, otklyuchi provob s Video out, vklyuchi komp, v windax prisoedeni provod, dalee vklyuchi ustroystvo na kotoroee vivodish, i idi v Nview (display - prop.'s - setting - advanced - Nview) doljen nayti 2 ustroystva...monitor, TV. dal'she "idi" v "select output device" ukaji kodirovku.....eto i vse ! na vidike najmi "LINE IN" mode....
udachi !
pishi
:D 8)
Turn off PC, disconnect all cables, turn on pc, when it "booted", connect all cables, go to Nview (display - prop.'s - setting - advanced - Nview) "if you connected all right" you shold see few choises, Clone etc...second one will be monitor, then go to "select output device" and choose "PAL or NTSC dunno which on u have "
all done then select "LINE IN" mode if you connected with "VSH"
on russian it was cooler lol

Geforce4 ti4600 conflicting or something with win2k.

Hi all...just got me brand new K7N2 Delta-ILSR....I got it all plugged in and went to install win2k pro...it gets through the dos portion of the setup with no problem...I'm not installing the raid drivers because my HDD's are not on the raid controller.
It gets done copying and says its goign to reboot to finish the install...it does so...then when it comes back up I get the dos-like progress indicator at the bottom of the screen that says Starting Windows and it goes all the way across and then the screen goes blank and stays that way...
I've tried numerous things and managed to narrow it down to the video card...I put in an old PCI card and it worked fine...I've pulled out all my other cards and extra devices and turned off the on board extras.
Apparently I'm missing some particular bios setting perhaps that makes my video card work properly?
I have the following actually plugged in:
Antec 450 Watt PSU
K7N2 Delta-ILSR
AMD Athlon XP 3000+ (333 version)
Crucial PC3200 512Mb
Visiontek Geforce4 ti4600
Anybody got any bright ideas???

I'm pretty sure I tried that already, along with increasign the voltage to it.

MSI GeForce4 Ti4600-VT2D8X advice?

Similar Messages

Maybe you are looking for