MSI Geforece GTX660 TI PE - How to flash...

Hi Guys,
Can someone tell me how to flash the latest vbios to my MSI Geforece GTX660 TI PE and where to get the items?
I would Like to do this as free as possible. Please
Thanks guys

Sorry for the way late response....
Rom Version: 80.04.4B.00.16 (P2004-0001)
Rom: https://www.dropbox.com/s/l2zgwxatg8ssjyf/GK104.rom
S/N: 602-V284-09SB1208007587

Similar Messages

Sticky - 2) How to Flash Bios NVidia 64 & Award Bios - More Detail

Sticky - How to Flash Bios NVidia 64 & Award Bios
Warning Flashing the bios can be bad for your PC's Health
DISCLAIMER:
This is a work-in-progress, not all solutions are "confirmed", use info at your own risk
Not all topics are covered, only stuff that keeps reapering in questions, or are thought to be important.
Before going ahead checkout When and how to update your BIOS
Note: Like reseting CMOS Flashing Bios will clear all any changes you made in bios & will need to be re-entered - see 12) below. So Make sure you remember/ make a note of them.
Resources:-
Floppy Images - Boot Disc.com
Simply insert Floppy & run downloaded Exe file.
Bios Saviour
IOSS Bios Saviour RD1-PMC4
Bios Saviour - RD1 Model Selection Sheet
SST 49LF040A LPC /3.3V - PMC4 For Neo3 250 & Neo4 (Thanks Arioch )
Recovery:-
MSI - Bios Recovery
Syar - Bios Recovery & Checksum Error
BIOS FAQ - How can you recover a corrupt BIOS ?
Bios recovery the dirty
way
Saving MurdoK's Bios - Syar
Offers Reprogramming/Replacement service - Cheaper than new mobo. Can't vouch for non uk service not used them. (1st off search engine)
EU Recoverybios.com
UK BiosflashUK
US Badflash.com
How to Flash MSI Guides.
There are different ways to flash the bios but to keep things simple will concentrate on the MSI Official methods :-
1) Award Flash BIOS Procedure 98/ME
This method assumes access to hd formatted using FAT32 & therefore readable by DOS.
2) Flashing the BIOS for Users using NON FAT file system
For use with Linux based & NTFS File systems - HD Not readable from DOS. Using this procedure the the files are copied to the virtual drive before running the flash utility. So the flash effectively is all done in memory.
This will be the method used by the majority of us. So:-
Follow the instructions in the last link (Thanks Bas)
The details below are additional checks/notes referring to the steps in Bas's guide, which may be useful.
Essential
2) Know Your model number - Is of increased Importance for NEO4 users - We have already seen instances of this.
5-1) Ensure you have a Boot Floppy with CD suport (this creates the Virtual drive used in the process) If you haven't got such
a boot disc see BootrDisc.com link in Rescources.
5-2) B4 booting floppy - Enter Bios & Load Optimised Defaults - To ensure that bios is returned to stock & any overclocking is
turned off.
7) If you miss the ramdrive letter the last DOS message will show your CD drive letter. The Ramdrive is the letter preceeding
the CD Drive. EG CD = D Ramdrive = C
Optional - Gives better control of procedure
11) Use of Switch command options with AWFL833C.EXE /py/sn/wb/cc/cd/cp/r TargetBios.file
Personnaly I use the switches as does Syar :-
Per Syar2003 Iv'e always used :
AWFL833D W7030NMS.xxx /py/sn/wb/cc/cd/cp/r
or
AWFL833D W7030NMS.xxx /py/sn/wb/cc/cd/cp/f/r
And a hard reset with jumper when done .
For a more detailed explanation of switches see :-
Syar's Bios Switch Explained
or Syar's Bios Collection - Flashing.txt
See Also Using a Batch File to Automate bios flash
12) after flash , enter Bios & load optimized defaults , then save + exit with no other change .
That way you have a fresh system with a fresh non problematic dmi-pool and user settings .
After this Enter Bios & Re-enter your custom settings.
From Syar - Which one do I do first?
Thanks to Bas & Syar for the majority of info in this guide

How to Flash Bios NVidia 64 & Award Bios
General:-
How to Flash Bios NVidia 64 & Award Bios
Warning Flashing the bios can be bad for your PC's Health
DISCLAIMER:
This is a work-in-progress, not all solutions are "confirmed", use info at your own risk
Not all topics are covered, only stuff that keeps reapering in questions, or are thought to be important.
Before going ahead checkout When and how to update your BIOS
Note: Like reseting CMOS Flashing Bios will clear all any changes you made in bios & will need to be re-entered - see 12) below. So Make sure you remember/ make a note of them.
FLASH PREPARATION
Always Load Optimised defaults & Save b4 flashing - NEVER FLASH When running an OC or Unstable.
If you need to flash & are worried about stability - run with a single module & test it it memtest 1st.
FLASH METHODS
1) Winflash (Syar2003) -
Winflash is safe to use if your windows and pc is stable .
How to get it Download & install MSI Live Update. Winflash is located "C:\Program Files\MSI\Live Update 3\FlashUty\Award
And as with dos flash reset bios and any overclocking to "load optimized bios default" + save, before and after flashing.
After winflash is finished it ask if you want to reboot - answer no , and shutdown (turn off) windows/pc instead .
After that disconnect the PSU's AC and reset the cmos with the jumper on the board .
This is how I use it , - safest way .
Note ! Place checkmarks on bootblock / dmi area /update all /reset cmos
Using Winflash - Syar2003's GuideWinflash
2) MSI Guides for flashing using a floppy
2 Flavours depending on OS the majority of us use the 2nd as dos floppies can't read a NTDS partition.
2-1) Award Flash BIOS Procedure 98/ME
This method assumes access to hd formatted using FAT32 & therefore readable by DOS.
2-2) Flashing the BIOS for Users using NON FAT file system
For use with Linux based & NTFS File systems - HD Not readable from DOS. Using this procedure the the files are copied to the virtual drive before running the flash utility. So the flash effectively is all done in memory.
2) How to Flash Bios NVidia 64 & Award Bios - More Detail
Resources:-
Floppy Images - Boot Disc.com
Simply insert Floppy & run downloaded Exe file.
Bios Saviour
IOSS Bios Saviour RD1-PMC4
Bios Saviour - RD1 Model Selection Sheet
SST 49LF040A LPC /3.3V - PMC4 For Neo3 250 & Neo4 (Thanks Arioch )
Recovery:-
MSI - Bios Recovery
BIOS FAQ - How can you recover a corrupt BIOS ?
Bios recovery the dirty
way
Saving MurdoK's Bios - Syar
Offers Reprogramming/Replacement service - Cheaper than new mobo. Can't vouch for non uk service not used them. (1st off search engine)
EU Recoverybios.com
UK BiosflashUK
US Badflash.com
Back to Main nVidia Based Board Forum Index

How to flash vBIOS GX60 Destroyer

I have a problem with my gx60 and I think it's a VBios bug, also I found the MSI tutorial to flash the vbios with DOS but when I try to execute the fvbios.bat, it says atiflash.exe -p 0 -f wrong command or file, and if I try to execute atiflash.exe it shows me the commands and options of that exe, so I couldn't flash the vBios.
So if someone knows how to flash the vBios please help.

There are few others talk about once they update the vbios, the memory clock is downclocking from 1250 to 900, so I think you shouldn't update your vbios since the problem doesn't really related to the vbios.
http://dragonarmy.msi.com/forum/showthread.php?t=64741&highlight=vbios#.VCK6NZSSzFB

What we need - a guide on how to flash bios, setup bios, and raid

Ok, a topic I see very often on many forums, and several times here, is the following; How to flash bios, how to setup the bios settings, and how to setup the raid array, and then setup the bios to boot from the raid array. Could we perhaps pull our heads togheter and write a detailed guide on these three topics, taking into account how to do it on the most used (commonly written about) MSI boards? and perhaps put as a sticky?
It would help many novice users trying to deal with these problems. I am willing to write on the subject of flashing bios on the MSI K8N SLI Platinum and how to install a Bios Saviour.

Like How to Flash Bios NVidia 64 & Award Bios
Syar2003 has also documented flashing methods in the Bios Collection. *Updated * 7025 1C3 EasyBIOS [r.2] thread
BIOS Guides pretty complete as far as Neo3 250/Ultra but as none of the pps who have been involved in the stickies have neo4's that chipset is lacking.
Raid Guide
If any1 wants to re-write /update these please feel free to write up the topic as a new thread thread & if popular we can add a link to the thread.
Volunteers welcome

GTX 580 Twin Frozr II O/C - confused by bios version number, and how to flash

Hi, my first post here. But I've been reading a bit here. Still, I get confused by this whole vga bios thing, version numbers and how to flash... Ok, so here's my situation:
I have two PC's. Both with one MSI Twin Frozr II O/C GTX 580 card inside. It seems to me that both are working according to specifications, GPU-Z reports:
GPU clock 800 Mhz, Memory 1024 Mhz, Shader 1600 Mhz for the borth of them.
Now, one of them seems not to be totally stable (this is the newest I bought a few days ago). It locks up/crashes in some games. The other seems ok, I've been having that one for a while. Could this be a GPU core voltage problem? GPU-Z reports for the both of them:
VDDC 0.955 v
I've tried running MSI afterburner, changing core voltage to 1025, and in afterburner settings enable "Force constant voltage". Still, GPU-Z, which I keep running at the same time, still reports only 0.955. I thought this setting in Afterburner would change voltage to 1.025? This situation is for both the old one and the new one.
Now to the Bios "problem".
The newest card (the not so stable one) reports through GPU-Z: Bios Version 70.10.20.00.01
The oldest (stable) card: Bios Version 70.10.17.00.01
So... which one has the newest bios? Seems to me it is the newest card.
BUT - when running MSI Live Update 5 (newest version) it says for both the cards that they have the the newest bios version, and there's no need to upgrade??
SO - I go to the MSI webpage: http://no.msi.com/product/vga/N580GTX-Twin-Frozr-II-OC.html#?div=BIOS to download the newest bios manually, just in case.. But there it gets more confusing. The Bios version found there is :NV255MS.104(.zip).
And also, on that page I can not find how to use that file. Extracting it just gives me the file NV255MS.104 and no extension.
So, which bios is the newest one? 70.10.20.00.01 (the highest number, in the new card, but not stable in some games), 70.10.17.00.01 (in my old card, but seems stable in the games I've tried), or NV255.104 (which I don't know how to use).
I've flashed my main board bios many times over the years in various set ups, the bios on two different SSD disks and so on.. never had a problem with that, or finding out if I have the correct bios, how to do it and so on.
Maybe I'm stupid, but this MSI Twin Frozr II O/C GTX 580 bios thing confuses me a lot... So, how do I solve this situation?

I am also interested in the answer as I have 2 MSI N580GTX-M2D15D5/OC cards. I can find the latest BIOS file "NV801MS.KG4.zip" and know the version is "KG4". But how do you relate this to the current BIOS version Afterburner or GPU-Z provides? The version they each provide is "70.10.17.00.01" for both cards. The only other way to determine if they are up to date is to install and run MSI Live Update. MSI Live Update responds that they are up to date with no current version or online version information on the Live Update tab. At least the information on the Home tab states the same VGA BIOS version as GPU-Z and Afterburner. I can can only assume that the BIOS is updated by using MSI Live Update.
Also just for the additional information GPU-Z displays my VDDC as 1.039 briefly then 0.995 constantly when switching between cards. I actually have the cards set to 1.050 with Afterburner to be stable when running Crysis 2 DX11 updates.

How to flash ? nx6800 ultra

as above, please help me..
im sick of my slow 6800ultra
please help :(
steps on how to flash it
thanks in advance

If you look up some of the 6800 Ultra threads, you will get a list of these problems and the way to sort them, Also it would Really helpful if you could give a list of your computer specs....
- live update doesnt detect my card
Everyone has this, its just that MSI have not updated there Live update for the card yet!
- ingame videoplayback error (choppy) [i.e farcry begining]
Your running Bios 14 which in alot of case the bios is faulty so change to bios 15, look on the forums to where to get this and install it, Also sound like you need to use a program called driver cleaner and reinstall a fresh set of the newest drivers...
- mood swing speeds (sometimes fast sometimes slow)
same again, bios change and drivers to resolve this
- d.o.t (dynamic overclocking technology) doesnt work (infact hangs my com)
Bios and drivers again
- doesnt work with some games (doom 3.. monsters are so colourfully scary)
hehe same answer
- sometimes after alt-tabbing, displayed graphics is choppy [fuzzy] (like as if someone sneezed noodles out really hard and it hit the screen, leaving imprints)
i had this to with bios 14, sorted when i got bios 15
- when i finally get to run 3dmark , the score for video card itself is 7000 +
LOL that not very good but that depends on what your computer specs are, i get around 12132 with a Athlon 3200+ 1g ram
here are some link on the issues your having
6800 Ultra Most stable graphics card ive ever owned
Geforce NX6800 Ultra Problems
Msi 6800 Ultra 100% but Flash = 110% ?
Hope this help! But do flash you bios... am hoping someone more confident will show you how, as am not confident to give instructions in that kind of stuff..

MSI 770T-C45 won't post after flashing BIOS with M-FLASH

After flashing AMIBIOS 8.3 to v8.7 with M-FLASH via USB stick I can't get any post.
Had I read this forum before I wouldn't have done it, but here I am.
Fan starts, LEDs are off, no beeps at all, power button does nothing. Black screen.
After force flashing (yes, I am THAT stupid) the prompt said it would reboot in 5 seconds and after that nothing.
Here's my setup:
Board: MSI 770T-C45
Original Bios: v8.3
Flashed Bios: v8.7 (flashed with M-FLASH)
VGA: EVGA NVIDIA GeForce GTX 660
PSU: Enermax FMAII EG465AX-VE 460W
CPU: AMD Phenom x4 9650
MEM: Kingston DDR2-667 4x2GB KVR667D2N5/2G
HDD: SAMSUNG 840 SSD 250GB
OS: Windows 8 Pro 64bit
I tried every CMOS clearing method found in previous posts and threads (including this and this.)
1. Unplugged from power, waited 5 minutes, removed the battery (5mins), changed jumper position (5min), switched it back (5min), plugged it in (5min) and powered up with and without USB stick in the hub next to network hub with old BIOS (v8.3) inside. Pressed CTRL+HOME, anything, not a single message or beep or LED flashing.
Also I removed all RAMs and kept one in the first socket. Nothing.
I really don't know what to do next. What seems to differ from other users is LEDs non working, what does that mean?

The problem here is that after update 8.6 the m-flash module was updated, so yes your mobo is a brick, but there is still hope for it. I had the same situation a few days ago with the exact same model and was able to recover it by following the steps on listed on the below posts:
https://forum-en.msi.com/index.php?topic=133578.0
https://forum-en.msi.com/index.php?topic=129989.0
It may seem complicated at first, but trust me its not at all.
Anyways you probably already have another mobo, send it for RMA or used it as frisbee, but it may come handy for some other doing the same noob flashing as we did

MOVED: What we need - a guide on how to flash bios, setup bios, and raid

This topic has been moved to AMD64 nVidia Based board.
What we need - a guide on how to flash bios, setup bios, and raid

Like How to Flash Bios NVidia 64 & Award Bios
Syar2003 has also documented flashing methods in the Bios Collection. *Updated * 7025 1C3 EasyBIOS [r.2] thread
BIOS Guides pretty complete as far as Neo3 250/Ultra but as none of the pps who have been involved in the stickies have neo4's that chipset is lacking.
Raid Guide
If any1 wants to re-write /update these please feel free to write up the topic as a new thread thread & if popular we can add a link to the thread.
Volunteers welcome

How to Flash ROMS/Load CWM on a rooted WT19i

Hi.I own an SE LWW and I have rooted it by following Nabeel's tutorial.
I can confirm that my Cell is rooted as i can use Titanium Backup, and I have the SUPERUSER app.
I have an UNLOCKED BOOTLOADER
After rooting I tried acessing the CWM recovery by Rebooting in recovery..I have tried every key combo out there during rebooting but the phone wont boot in the RECOVERY MODE.
Using REBOOT IN RECOVERY in ROM manager leads to a normal reboot.
I guess CWM isn't installed in my MOBILE.
So i have no IDEA how I can install CUSTOM ROMS.
Can anyone also explain
1) how to make A Nandroid backup (I have backed up system apps using titanium backup..is it the same? )
2) A process for flasing ROMs
3)What is and How to flash kernels ?
Thankyou.

Thread moved to correct sub forum.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

How does Flash Player determine if TLS is available?

In ActionScript, there is a setting called "flash.system.Capabilities.hasTLS" that determines whether or not the Flash Player can make native SSL/TLS-based connections. The definition of this property says " Specifies whether the system supports native SSL sockets through NetConnection (true) or does not (false)."
How does Flash determine whether this property is true or false? Is the value passed to the Flash player by the browser? Does Flash figure it out from the environment? If so, how?

http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l

SFE 2000 how many flash and RAM : MB ????

Hi every one
Who can tell me the Cisco Linksys SFE 2000 have :how many flash and RAM : MB ????
Best regards
Zammit Ikbel

This is not Apple Support, nor are they able to be contacted by e-mail. This is a user to user forum, and we can try to help you as best as possible. Apple moderators can move your thread to a more appropriate forum if needed.
A faster hard drive connection is available through your Thunderbolt port. See what you can connect via Sonnet's adapter:
http://www.sonnettech.com/product/echoexpresscard34thunderbolt.html
An eSATA or Thunderbolt hard drive would probably be at least faster than the internal drive, and an external SSD may be cheaper than an internal for your notebook, and even faster.

I am replacing the H8S 2117 chip, does anyone know how to flash it, or does it even need to be flashed?

I am replacing the H8S 2117 smc chip, due to the system not booting up, can anyone tell me how to flash the chip or if it even needs to be flashed or if someone offers this as a service?

I am replacing the H8S 2117 smc chip, due to the system not booting up, can anyone tell me how to flash the chip or if it even needs to be flashed or if someone offers this as a service?

How tune flash player 9 for use with proxy

I use me browser with proxy. But flash player, when i show
yourtube etc, use direct connection and not use proxy server. How
tune flash player (last fersion, 9) for use with proxy. I want what
all traffic go over proxy

Will alienate? They've already alienated users a long time
ago. That isn't the point, though, because it doesn't matter if
users are alienated, it only matters if the users need flash.
The only thing that could make flash player better is open
source. I don't see why they don't do it. They make money on the
authoring tool, not the player. All of my Linux machines are ppc
and x86_64, no flash there. I also don't have flash on my PDA, a
Palm T|X. If the player was open sourced, people would stop
complaining about how much flash sucks -- because, right now, there
are very serious, legitimate, complaints against it.
Anyway, for now I'm hoping that SVG matures quickly.
Although, I"m sure that once Adobe sees that train coming, they
will extend Flash (dev.) to export SVG movies containing embedded
binary data that can only play with their binary plugin.

How does Flash send outgoing HTTP request to server?

Hello everyone,
I would like to know how Flash sends outgoing HTTP requests.
I would like to know when from the inside of a Flash SWF file
request for another SWF or FLV file is made; how the Flash sends
this request to server.
Thank you very much and have a great day,
Khoramdin

Hello everyone,
I would like to know how Flash sends outgoing HTTP requests.
I would like to know when from the inside of a Flash SWF file
request for another SWF or FLV file is made; how the Flash sends
this request to server.
Thank you very much and have a great day,
Khoramdin

Problems installing MSI GeForce GTX660 Twin Frozr OC video card

I recently built my first gaming computer and everything worked...... except installation of the MSI GeForce GTX660 Twin Frozr Gaming OC video card. I have an MSI Z87M Gaming motherboard and an Intel i5 4670K processor. Running Windows 7 Professional and 8 GB Crucial Ballistix Sport RAM. I've tested the card on an older machine with a first generation PCIe slot and it installed and worked fine. When I install it on my computer everything is fine until I turn the computer off and reboot, and then nothing comes up on the screen. Are there some BIOS settings I'm missing or some conflict I don't know about? - Kennard

Add card's S/N and a copy of the current vbios (save it to file, upload it to some filehoster and add link). Also list the bios version the board is at.

MSI Geforece GTX660 TI PE - How to flash...

Similar Messages

Maybe you are looking for