MSI GF 6600 AGP AND problem with clocks

Hello,
I've got a big problem with saving clocks in my graphic card. Neither RivaTuner nor coolbits don't work - after rebooting computer the clocks are reseted and forced to default values.
I'm using fw 71.89 (previously 71.84).

Winter,
Run Driver Cleaner and get rid of all the old Drivers. Then install the latest nVidia ForceWare Drivers. From there try to set the clock speeds you want. (Make sure you set it to apply at startup.)
Remember that there are two speeds, one for 2D and another for 3D.
Take Care,
Richard

Similar Messages

Msi k7n2 delta2-FSR and problems with memories(ddr 400);help me!!!

hello!!!!.
I am very frustrated because is imposible that memories work fine to 200*2.I´ve tried twinmos and now ocz premier ddr-400.When i used memtest i have a lot of errors and frozen in windows.
If i choose vdim 3.30 memtest no errors but this is a voltage very high.I don´t now what can I do.
Is a bug of this motherboard?
In other forum tell me that this motherboard don´t work good with memory to 400 but the motherboard has dual channel.
i need help.
thanks!
pos data=sorry for my english

Quote from: Stu on 26-March-06, 01:48:25
how can you have a stable OC if you have memory errors?
i don´t Know but prime no errors.
Quote from: Stu on 26-March-06, 01:48:25
forget about the OC for now, and get it working properly at stock speeds, then you can worry about getting an OC right
I have tell than 166 cpu(default values in bios),there are a lot of errors(more of one hundred and froozen in windows) in memtest.

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Monroe
Just in the moment i updated to lion 10.7.4 my Bose Soundlink Bluetooth stop working as good as it was. I´m gonna try the update in the Bose web page. I hope it works

MSI 645Ultra and problem with memory.

Hello.
I have big problem with my mobo. I can't run 645Ultra mobo (MSI 6547) with other memory than installed actually. Now I have Samsung DDR333 128MB (one-sided), and everything works well. But I tried to install another modules (2 pieces - 256MB DDR266 double-sided). After install one of those modules, my comp doesn't start. Mobo only beeps and there has no signal on my monitor. With installed two modules - my memory (ddr333) and one of those 256MB ddr266, computer runs, but POST shows me only 128MB :(.
What is going on? Does this mobo supports memory other than ddr333 (user manual says - YES, but now I'm not sure).

"645 ultra" DDR Brands tested with this board
http://www.msi.com.tw/html/support/testreport/6547/memory.htm
ddr 333 what brand :O
ddr 266 what brand :O
DDR 266 aka 2100 Cant run at 333 aka 2700 ;(

P35Neo2 FIR and problem with booting

So I have problem with booting my compie. Compie try to boot to the part of start windows, after that in case of switch into graphicis mobo going down and restarting (WinXP SP3). I think, that problem is not in PSU, cos i have 800W XILENCE (+3,3V 28A, +5V 32A, 4x+12V 20A, -12V 0,5A, 5VSB 3A), Board P35 Neo2 FIR, E7200 proc, bios 1.9 (updated). I have 5 disk and use raid function in bios. Graphic Radeon HD3650, Memory Zeppelin 4x1GB KIT 800Mhz.
I start with change of PSU from 550W to 800W but it didnt work, previus PSU had (+3,3V 30A, +5V 32A, 2x+12V 18A, -12V 0,8A, 5VSB 3A),
i try change memory, but no efect.
After update bios there was standard warning about bad cheksum, after resave Bios settings it was gone, and compie boot after that.
Any idea?
Thanks

So my problem is solved...but my feeling of this is not good...
I updated BIOS from 1.9 to 1.10, reset Bios settings, after restart i pressed F2 for load standart settings and i changed in Bios only that i am using RAID and disable disket and it works...i boot my compie into windows without any problem...
So i try change another things in Bios and my compie hangs in continous resets without booting into windows...no BSOD only restart and restart...
After reseting Bios settings and again Load to Default it works...and run windows...
There was only one new thing ... screen flick for the second with new screen about checking NVRAM ....this screen was not visible before (and maybe this is the problem), cos if i change something in BIOS about clocking and power management and other ones, this screen is by booting missing...and compie not run in Windows...
Next thing what i see, that in CPU multiplication dont work multiplication 9,5 and proc used frequency 2400 (9x) (it is E7200 on 2533)
i hope that this bios 1.10 fixed my problems...and my opinion is that P35 Neo 2 FIR is not ideal board for E7200 proc...so i m looking for another proc...and maybe another board...

XT 5900 and problems with Photoshop

Has anyone with an nVidia card had any problems working with the Photoshop program? I recently purchased the XT5900 VTD 128 card and have been attempting to calibrate my LCD monitor to use the Photoshop program optimally. The monitor is to be adjusted for black/gray and color gamma numbers that will allow one to work with and adjust digital photos that will closely correspond to final printed product. The Adobe Gamma utility simply does not work on my LCD monitor. I have talked with support at Envision (monitor) and MSI about problem with little success. Perhaps someone out there has encountered similar difficulties and has some suggestions/solutions. Thanks.
LJ Brown

Friend I have the opposite experience. Working on my LCD monitor (and perhaps that is part of the problem) the great picture I produce on my monitor is not reflected in the printed product. Colors are washed out a little, contrast not correct despite perfect on the monitor. Have been working with others about this problem trying to decide if it's the monitor, the video card, etc. The printer (Canon) is properly setup, all heads are in alignment,etc. I also have Photoshop CS. Have tried to calibrate the monitor with the Adobe Gamma utitlity so this problem would not occur but the calibration is poor, the black/white and color target and gamma screens just don't end up the way Adobe says they should and I presume therefore is why the printed product is less than desirable. If you have any suggestions please pass them along. Will be away for a week and will pick up the thread then.
LJ Brown

MSI Lighning 7970 card 2560x1440 problem (with DELL U2711)

Hello. I have trouble with my display and 2xMSI 7970 Lighning graphic cards. Could someone help me?
Configuration:
Core i7 2600K running on gigabyte P8Z68-V motherboard with J.3603 BIOS
2 MSI Lighning 7970 cards without crossfire connector inserted (I don’t need crossfire for gaming – just multimonitor configuration for graphics).
The BIOSes of the cads are the same-from-the-box and was identified like MSI.HD7970.3072.120411.rom in the GPU-Z database.
The numbers in the GPU-Z’s “BIOS Version” is 015.013.000.010.000000 (113-AD40900-X01)
The BIOS numbers in the MSI Live Update is TV278MS.102
And the serial numbers from the stickers of the card’s boxes are:
602-V278-02SB1204058976 and 602-V278-02SB1205129844
All stuff running on Win8.1x64 system.
I have 3 displays: 2 of them are Samsung 245T running 1920x1200 and the last one (the new one) is DELL U2711 (witch is capable for running 2560x1440 resolution).
Now, THE PROBLEM.
When I running 2-displays configuration (2xSamsung 245T connected via DVI) there are no any problems at all: all works fine. The problem with the 3d display and it’s 2560x1440 resolution. I tried different cables and both cards, but display couldn’t run correctly.
1) It is running fine but ONLY 1920x1080 resolution when connected via DVI. There is no 2560x1440 settings at all in windows system then. I tried both cards and both DVI-ports, also I tried different DVI cables. No matter. It’s only 1920x1080. The drivers for the display panel was installed from the dell’s official site and the’re latest (as I could see..)
2) When I tried to connect the display via DisplayPort cable to my cards (no matter which of them or which of 4 display port’s connector on each card) it COULD RUN AT ALL. Usually the display showing up correctly with the right resolution (2560) but the screen is blank (black). After some time monitor goes to the suspend mode.
From time to time display could shows some desktop with terrible quality (I get the photos of it) for 2-3 second and then it’s blank again.
Also when connected I get the error “DisplayPort Lower setting applied” from time to time.
3) I have tried some DVI-Displayport adapters (witch was in the box with the MSI cards) and the result is the same as in 1) - only 1920x1080 resolution...
The display is fine and it works perfectly on another system (without MSI cards). What’s the problem? Should I upgrade BIOS or something to work in 2560x1440? Thank you.

the poor quality of the screen (when it shows up for 1-3 seconds with DisplayPort connection)

K7T266 PRO2-RU and Problem with a FEW DISPLAY ADAPTERS ...

Hello ,
I was using my mainboard with 32 MB Creative Riva TNT2 Ultra until creative's fan was damaged . I tried 16 Creative TNT2 m64 display adapter of a friend of me , but it didn't work with K7T266 PRO2-RU. Many sounds are coming from mainboard while D-LED shows Testing RTC (or boot attemp, I'm not sure about that) (Same symptoms with "no graphic adapter" - I tried again after unplugged the display adapter - )
At the beginning I was thinking that the 16 MB creative graph adap. was broken . So , today I bought a new graphic adapter 128 MB of Creative 3d Blaster5 Radeon 9200SE . When I plugged it into mainboard , I saw the same problems with 16 MB Creative TNT2 m64 . After that , I found another 32 MB Creative TNT2 Ultra from my friend and it worked with my mainboard FINE .
- I tried all of the old bioses of MSI K7T266 PRO2-RU
- I tried to start the computer with no any other devices (such as HDD , sound card , tv card etc. ) . Only display adapter was plugged in the mainboard , but it didn't work . System hanged up everytime I tried .
- I made some bios adjustments which are suggested at this forum ....
But none of these worked .... ?(
What is the problem ? Why only 32 MB creative TNT2 Ultra is working with my mainboard , but 16 MB Creative TNT2 M64 and 128 MB Creative 3DBlaster5 Radeon 9200SE are not while all of them are working FINE with an old PII mainboard . (tvout+DVI) I'm looking forward to hear from you . , Help me please .
Ps : Can new beta bios solve that problem ?
XP pro
2100+ 0.18m XP CPU with coolermaster CP5
40 GB Seagate Barracuda IV
300 watt Codegen Power Supply
2*256 MB Kingston DDR 2100 Memory
( No floppy , no souncard , no tv card etc , no any other devices like cdrom , dvdrom , cdrw etc.)

That's it!
I provided a few PSU's from my friends and tried 420 watt thermaltake and 520 watt VANTEC Stealth 520A PSU ...
Same situation happened and 128 MB Creative ATI Radeon video card didn't work ...
The problem can not be about PSU ...
I tried two different brand of fx 5200 (128 MB ) video card on my system (with 300 watt codegen PSU) . Everything is ok .
And I also tried the RADEON card on my friend's computer which is running with 230 watt Elan Vital PSU . It worked perfectly ...
So what can I think about that situation?
The Answer is : There is something about MSI mainboard ... When I wanted to contact with support center via e-mail , I got an automated e-mail answer which is not completely able to solve any of my problems.
Besides , I saw the problems between brand new Nforce mainboard of MSI and ATI video cards ...
SO , if we get all of these informations together , we can say "THERE IS SOMETHING ABOUT MSI" ...
The solution is not buying expensive PSUs...
That's really bullshit , I can buy a brand new mainboard instead of an expensive PSU.
Finally , I bought an Asus mainboard , everthing is going ok now!
I'll not buy products of MSI anymore because they didn't do anything to solve my problem . Goodbye MSIIIIII ....................................... ........

Choosing between external and partner application and problem with login

We have an application on Oracle App Server 10.1.3.3 and we have an OID server.
I had taken this for granted that I should define the application as 'Partner Application' and not external application for single sign on.
Now that we need the 'PASSWORD' retrieved by application, we are considering defining it as an external application.
There are at least two problems I have encountered defining the application as external:
1. 'pageConfig:serverDate' is among the login form's inputs in the login page, but I can't set it in orasso 'Edit External Applications' page
2. After login using SSO as external application and when I click on the application's new link, the login page is shown with the username and password field filled, but I have to click on login button anyway (no automatic and invisible login).
I will be very grateful if someone gives a general view on the differences between external and partner, whether in this case external has to be used or partner and finally give some comment on my specific problem with login button and manual login.
Thank you

Just some information :
- The problem with LOGIN page exists. I don't have that problem with for example GMAIL when defined as external application, but with my applications in Oracle Application Server.
- There is also another thing I don't understand. The link to external application is something like:
javascript:open_jwindow('../ealogin?ID=76D4766','76');
and couldn't be executed outside pls/orasso
in other words we can't give that to our users, can we? They should login to orassso and see that?
We don't want to involve them in Identity Management...
Any help is appreciated....
Regards

Alpine CDE-103Bt Head Unit and Problem with 160 Gig Ipod Classic

Hi,
2 weeks agao I brought a new Alpine CDE-103BT Head unit for my car. I have owned one of the old 160 gig classics for the last year and a half and at the time I brough the unit I was told this should all work sweet. Indeed all of the documentation from Alpine, and the Sales person, said this would not be a problem.
Unfortunately from Day one, most times after I received a phone call, while playing my ipod, the Head Unit would givesme an "Error-03" message and stop playing my music. I would then have to unplug my ipod, reset it, and plug it back in. Extremely frustrating.
The people I brought the Head Unit from are trying to say its an Ipod problem, yet I never had any problems with it and after I contacted the Australian Ipod help line they said it all appears to be working correctly. The firmware version I was on when I first tried the ipod on the head unit was 1.1.2. The Alpine manual said it should be 1.1.1 (then again you would expect them to be able to cope with updates) so as a last ditch attempt I downgraded the firmware on my ipod to 1.1.1, but it did not make a difference.
The only other thing I have noticed is that I switch the repeat and shuffle settings off when I plug in the unit, but after I unplug it after an Error-03 the Repaet function has been swtiched to all - I am not sure if this is what is causing the problem.
I am getting pretty frustrated with everything and I was wondering if anyone else has come accross this issue and even me helpful had they found a way to fix it.
If not has anyone had any postive expereinces with Alpine head units?
Thanks

Hi,
2 weeks agao I brought a new Alpine CDE-103BT Head unit for my car. I have owned one of the old 160 gig classics for the last year and a half and at the time I brough the unit I was told this should all work sweet. Indeed all of the documentation from Alpine, and the Sales person, said this would not be a problem.
Unfortunately from Day one, most times after I received a phone call, while playing my ipod, the Head Unit would givesme an "Error-03" message and stop playing my music. I would then have to unplug my ipod, reset it, and plug it back in. Extremely frustrating.
The people I brought the Head Unit from are trying to say its an Ipod problem, yet I never had any problems with it and after I contacted the Australian Ipod help line they said it all appears to be working correctly. The firmware version I was on when I first tried the ipod on the head unit was 1.1.2. The Alpine manual said it should be 1.1.1 (then again you would expect them to be able to cope with updates) so as a last ditch attempt I downgraded the firmware on my ipod to 1.1.1, but it did not make a difference.
The only other thing I have noticed is that I switch the repeat and shuffle settings off when I plug in the unit, but after I unplug it after an Error-03 the Repaet function has been swtiched to all - I am not sure if this is what is causing the problem.
I am getting pretty frustrated with everything and I was wondering if anyone else has come accross this issue and even me helpful had they found a way to fix it.
If not has anyone had any postive expereinces with Alpine head units?
Thanks

Workflow and problems with labels

Hello!
I've been testing out some things in Edge and I've noticed a few things that I've been trying to find some documentation and information about, I would greatly appreciate any enlightenment on the following observations:
Frame labels do not work for me - both with files created from scratch in Edge and ones made of existing HTML + CSS files. I tried the in app lesson on looping the counter and the 'Play from (loop)' doesn't work, I thought it might have been because of an error in the instructions telling users to play from a frame label that exists at the same point in the timeline where there is a 'stop' trigger but even offsetting the 'loop' label would not work. The final sample file works as intended when previewed.
I tried a few tests with new files consisting of really basic stuff - one symbol with an 'on-click' > play from (go/start/in/one/etc) and another symbol simply animated on the x and y axis with an animation to the opacity with a stop trigger placed on the timeline and tested with the play from label placed both at the same time as the stop trigger and offset after the trigger - neither works it has no effect when clicked. (I know about what scripts to do on completion to get it to play from the start) Interestingly play from (milliseconds*) *0.125/1001/2000000 etc does work for me but this is not ideal as it is far more useful to be able to play from labels.
Animating existing HTML - I've got a simple html page set up consisting of a container div with a number of other divs inside which I have been animating in Edge. The Edge file is set up so the container CSS overflow is hidden. Now can someone please clarify if the following method of workflow is a mistake on my part, limitation in HTML+DOM, bugs in edge or combination/none of those things?
Workflow - bring in the html file to edge do simple animated opacity etc on the various elements start adding keyframes and labels etc - the label problems as above. Now my intent is to have each of the div's in the container be clicked on and bring in the next one - in the same place in the viewport. I've noticed that when changing various elements visibility after tweaking animation to look good and then subsiquently setting on-off keyframes for visibility it would suddenly cause all elements lower in the DOM to move position and suddenly have what looked like keyframes for y axis position/transform? Is this bad practice to use the on-off visibility for elements? It meant that what should be a really simple and quick 10 second animation took about 3 hours to make, should we be not using the on-off keyframes for showing/hiding buttons that are in divs that sit on top of each other? Should i set up z-index values for all elements in the CSS files? (I saw a reference to you can assign z-index values in the 'elements' panel but I can only see 'arrange' - is this a different term for z-index?)
I'm a long time user of flash, maya, after effects, digital fusion, combustion, and many other timeline based software tools - it is fairly intuitive to me picking up new systems but the issues with on-off visibility and keyframes below in the timeline really was a very frustrating workflow. I'm used to changing and editing the whole animation on the timeline seeing what works and doesn't - deleting layers, changing timings etc, i found this way of working really slow due to changes to elements position when ones above in the flow were turned on or off. Please do suggest what I should change in my approach to using edge as compared to other animation tools as it looked great on preview but I'm a bit frustrated in using the release. Is this a bug in my release?
Where is the help and reference files for Edge? - is this screen shot it? -
I can't find any info on basic definitions of the tools and options anywhere, and can't find much on anything to do with using edge in production with existing HTML documents, please send me some links if you have them. I've seen the edge javascript API thing but is there anything else?
Cheers.
Here is the approximate code of the page for reference - I actually got the file working in the end but using 'play from (miliseconds)' instead of play from (label) and much frustration slowly editing the timeline and elements visible/hidden status and redoing animation on elements below in the timeline to get them placed correctly.
HTML:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Master Document with base styles</title>
<link href="css/master_styles.css" rel="stylesheet" type="text/css" />

<link rel="stylesheet" media="only screen and (min-width: 320px) and (max-width: 480px)" href="css/mobile.css" />
<link rel="stylesheet" media="only screen and (min-width: 768px) and (max-width: 1024px)" href="css/tablet.css" />
<link href="css/desktop.css" rel="stylesheet" media="only screen and (min-width: 1025px) and (max-width: 3000px)" />
<style type="text/css">

</style>
</head>
<body>
<div id="container">
         
            <div id="mainContent">
                <div id="mainlogo">
                </div>
            </div>
            <div id="firstButton">
                  <div id="Abutton1">
                  <p><img src="img/a_72_off.png" width="72" height="72" /></p>
                 </div>
            </div>
            <div id="transition1">
                   <p>Wipe transition 1</p>
            </div>
            <div id="secondButton">
                    <div id="Abutton2">
                   <p><img src="img/a_72_off.png" width="72" height="72" /></p>
                   </div>
            </div>
            <div id="secondContent">
                <div id="Abutton3">
                <p><img src="img/a_72_off.png" width="72" height="72" /></p>
                </div>
            <div id="text1">
                  <h1>Heading </h1>
                  <p>Byline</p>
                </div>
             </div>
<div id="transition2">
    <p>Transition 2 - TBC</p>
</div>
      <div id="thirdContent">
      <div id="lastbutton">
        <p><img src="img/end_icon_crop.png" width="150" height="150" border="0" /></p>
      </div>
      <div id="text2">
        <h1>Heading</h1>
        <p>Byline</p>
      </div>
</div>
    <div id="transition3">
        <h4>Small print</h4>
</div>
</div>
</body>
</html>
CSS:
(master_styles.css)
@charset "utf-8";
body {
    margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
    padding: 0;
    text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
    color: #19171B;
    font-family: AFBattersea;
    font-size: 100%;
#container { /* the main holder for all of the viewport content - an image frame */
    text-align: left;
    margin-top: 0;
    margin-right: auto;
    margin-bottom: 0;
    margin-left: auto;
#mainContent {
    z-index: -1;
#firstButton {
#transition1 {
    color: #FFF;
#secondButton {
#secondContent {
#transition2 {
    color: #FFF;
    height: 100%;
#thirdContent {
#transition3 {
    color: #FFF;
#mainlogo {
    background-repeat: no-repeat;
    background-position: center center;
    background-image: url(../img/960_off.png);
#Abutton1 {
#Abutton2 {
#Abutton3 {
#text1 {
#text2 {
#lastbutton {
#text3 {
(desktop.css) - I've not included the other css files referenced in the media queries as they only contain names of elements for this purpose
@charset "utf-8";
#container { /* the main holder for all of the viewport content - an image frame */
    text-align: center;
    margin-top: 0;
    margin-right: auto;
    margin-bottom: 0;
    margin-left: auto;
    height: 700px;
    width: 1024px;
.mainContent {
    height: 100%;
#firstButton {
    height: 100%;
#transition1 {
    height: 100%;
#secondButton {
    height: 100%;
#secondContent {
    height: 100%;
#transition2 {
    height: 100%;
#thirdContent {
    height: 100%;
#transition3 {
    height: 100%;
#mainlogo {
    background-image: url(../img/960_off.png);
    height: 72px;
    width: 960px;
    margin-top: 364px;
    margin-right: 36px;
    margin-left: 36px;
#Abutton1 {
    height: 72px;
    width: 72px;
    margin-top: 364px;
    margin-right: auto;
    margin-left: auto;
#Abutton2 {
    height: 72px;
    width: 72px;
    margin-top: 364px;
    margin-right: auto;
    margin-left: auto;
#Abutton3 {
    height: 72px;
    width: 72px;
    margin-top: 364px;
    margin-right: auto;
    margin-left: auto;
#text1 {
    text-align: left;
    margin-top: 16px;
    margin-left: 320px;
#text2 {
    text-align: left;
    margin-top: 16px;
    margin-right: 330px;
    margin-left: 360px;
#text3 {
    text-align: center;
    text-indent: -192px;
    width: 320px;
#lastbutton {
    margin-top: 364px;
    margin-right: auto;
    margin-left: auto;
    height: 150px;
    width: 150px;

Hi,
I wonder if it's related to the multilingual capability of BPM Object presentations.
Could you:
1. right mouse click the project in the Project Navigator tab.
2. click "Project Preferences"
3. click "Languages"
Do you see multiple languages? Is English (or whatever language you're using inside Studio) the default?
When you log into the WorkSpace, could you double check the language you are using (log in -> click "Settings" in the upper right corner) -> with the "Display" tab selected, is the language you chose as the default in Studio selected?
I suspect the reason you see some but not all of the labels is because you have defined some of those labels in the language selected in the Workspace. You can add the addtional labels for the various languages you want to support if you:
1. Open a presentation
2. Click one of the labels
3. In the properties tab on the right, click the field beside the "Display" property
4. Click the button with the "..." on the right side of this field
Hope this helps,
Dan

Spanish Dictionary and problems with spanish special characters

I need a spanish dictionary, with all spanish words. I know that your priority are france, spanish, germany and Italy. So, the component has problems with spanish special words, this problem was notified before.
Have you ready something? A new version?
Thank you for your time.

For the special character issue, you can check the reference:
http://forums.adobe.com/message/2430501

A lot of bug in ios 7 and problem with the iphone

There is a problem with ios 7 when I delete history with my iphone 4s ...and only one month after that I've buy my iphone appared a problem with the wi-fi!!!!!!

Try https://discussions.apple.com/message/23175298#23175298
Allan

MobileMe Gallery and problems with new password

Hi. I'm using iPhoto 09, and have posted many MobileMe galleries over the years. Recently, I changed my MobileMe password. Now, iPhoto tells me that an "error occurred with the publication of album 'XYZ' Your MobileMe account information is not correct. The provided login or password is not valid" and it prompts me to return to MobileMe Preferences to re-enter my correct login and password. Well, the trouble is that I've done this many times. (Which also causes sync problems - but that's another story.) And though my System Preferences are now correct, I still cannot successfully update a MobileMe gallery in iPhoto. I checked my settings in the Keychain, and all is fine. I also trashed iPhoto preferences, but the problem still remains. Any thoughts on how to solve this irritating problem? Thanks!

I found another solution based on this posting.
http://forums.macrumors.com/showthread.php?t=689762
Works perfectly.
+I have the same problem and started a thread about it on Apple's discussion board, see http://discussions.apple.com/thread....art=0&tstart=0+
+First, I'd suggest sending Apple feedback on it (select "Provide iPhoto Feedback" from the iPhoto menu).+
+When you change your MM password, you need to enter the new password in MobileMe in System Preferences. When you select MobileMe in System Preferences, it will (correctly) say that your password has changed and ask for the new one.+
+It looks like the problem with iPhoto is that when you enter the new password in MobileMe preferences, the keychain entry for it isn't being updated. Look for publish.me.com in Keychain Access. It will probably have the old password. Changing it there and then signing out/in in MM System Preferences seems to fix the problem with iPhoto. If not, try deleting publish.me.com in Keychain Access and then sign out/in to MobileMe in System Preferences.+
+Give it a try and post what happens.+
Jay

Exchange 2010 : Doubt with recipient type and problem with disappearance of the original recipient in the mail relay

Hello. First of all, thank you very much for your attention.
After that, I will expose the problem:
I have a user domain called "comercial" with a corresponding mailbox "[email protected]"
. This user
has assigned multiple emails such as "[email protected]", "[email protected]", "[email protected]" , having as default email "[email protected] ".
On
the other hand,
another domain user
called
"menganito" with it's mailbox "[email protected]" account, also has a few mail accounts "[email protected]", "[email protected]", " [email protected]"
...having
as default email "[email protected]
The user "Comercial" is forwarding
all of it's mails to the user "menganito".
The problem is that "menganito" is not receiving the exact
"comercial"
sender email, but the email which appears by default ("[email protected]").
"Menganito" would like to know
from which email exactly the mails he is receiving have been sent ("[email protected]",
or "[email protected]"
or "[email protected]").
Also, he would like to knowthe email of the original sender (from the outside of the domain) whom the user "Comercial"
have received the email from.
In another type of email servers (Kerio,...)
this is not a problem, because forwarding by
defaultis always showing
the original sender and original receiver.
Maybe the problem comes from the recipient type I'm using.
Should I use another type of recipient? should I use a transport rule?
Any idea ? Thanks again in advance.

Hi Simon. First of all thanks for your answer.
This happens with all accounts. I tried with news accounts and different browsers for OWA and Outlook anywhere and happens the same. Is not a cache problem
The problem is
when "[email protected]"(default
and set as default answer
account by
exchange)
receives
a message in "[email protected]" when
forwards to "Menganito"
this message will appear from"[email protected]"
instead of "[email protected]".
This happens with all accounts.
I can understand that i can't avoid
default reply address on the same
domain, but also with different domains happens
the same?
The platform is only one clean and updated server 2012 as dc and another clean and updated server 2012 with exchange 2010 sp3 directly and after rollup 4 for exchange SP3, no previous versions and servicepacks of exchange 2010 was installed before. Before
install exchange 2010 sp3, i installed all the filterpacks (3) and .net 3.5 and all updates that i finded for 2012 server (i tried for 2 days): No more updates for sure. After, in powershell, i put this:
Add-WindowsFeature NET-Framework-Core,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,Web-Mgmt-Tools,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,Web-Asp-Net,Web-Client-Auth,Web-Dir-Browsing,Web-Http-Errors,Web-Http-Logging,Web-Http-Redirect,Web-Http-Tracing,Web-ISAPI-Filter,Web-Request-Monitor,Web-Static-Content,Web-WMI,RPC-Over-HTTP-Proxy
-Restart
The machine and exchange works good (i3 with 4gb ram, and raid 1 1tb of HD) and the organization only has 15 mailboxes. No problems with even viewer and all is correct.
Thanks again.

MSI GF 6600 AGP AND problem with clocks

Similar Messages

Maybe you are looking for