MSI GNB MAX and RICOH R5C476II PCI to Cardbus bridge not working! Help
Why my PCMCIA & CARDBUS Card Reader based on RICOH R5C476II Chipset not
working on MSI GNB MAX BOARD (with newer bios 2.3)???
My Card reader is fine and working properly on many ithers motherboards like: ABIT BD7-II based
on Intel 845E Chipset, or ASUS TUSIM, ASUS TUSL, and ASUS PIIIB-F
Why ??
Please help me.
Yes, sure. I'm trying to use all of five PCI slots, and after slot chnge I,m setting Reset Configuration data in BIOS.
result is the same in all Card positions. Card is detected, but not working corectly.
I'm trying to resolve any hardware conflicts by disabling all od internal mothebrord components like IEE1394 Audio, Serial Ata and others - no cahnges, no solutions ....
Similar Messages
-
When trying to open my mail, it opens then closes immediately, I've deleted the account and re-created it 3 times and also done a reset but still not working, help please
Try closing all apps in Multitask Window
1. Double tap the home button to bring up the multi-tasking view
2. Swipe up on the screenshot of the app you want to exit.
3. The app will fly off the screen -
MSI GNB Max and P4 3.06 with 56C Idle (Bios)
is that ok or to high, i know about some bugs with the Temp Sensor so there are my 2 cents ! :D
Please give me some feedback thx. !I had the exact same problem. I bought a Cooler Master IHC-H71 CPU cooler and it brought me down to 40-44 at idle. Ordered it from http://www.phamcomputer.com
-
Realisticly:how much OC with my system?MSI GNB MAX
Ok, How much OC I can get, with my system, if I change the 1.5ghz 266DDR Value RAM to something better. Any suggestions.
I plan to ditch the ram for something better, but my mobo, and CPU aren't that fast compared to the C, and E, and the 64 stuff.
I am using the 2.8B, E7205/i7205 mobo.
Only fan cooling. Using the pipe101, will place the tornado on it. Does the vantec fan card improves my GF performance.
I am just able to OC my card from 350 to 388mhz, 1.09ghz, others got a 420mhz on a supperior system. All using the inno3d 6800gt.. Or I'm looking at an "old" system already.
The OC FSB is just up to 153. I read somewhere that it is useless/not worth to OC this system.
So what do you think?
my system is in the signatureI would not push further than 160 FSB, you can corrupt your disks since PCI /AGP are not locked. Usually PCI frequency above 38 MHZ is not considered safe and 150 FSB corresponds to 37.5 MHZ PCI frequency. I corrupted my 30 GB WD at 160 FSB.
I have GNB Max, P4 3.06HT, 2x 512MB KVR DDR333 (CAS2.5 rated). I oveclocked the system to 150 FSB, P4 is running as 3.45GHz@600FSB (HT is on), with dual channel DDR300 memory (2-3-3-6 timings). System is 100% stable after testing with Linux kernel compile, Prime 95, 3DMark benchmarks. The performance gain in CPU intensive benchmarks is almost the same as increase in FSB frequency, which is 12.5%, since RAM overclocks in sync with CPU.
If you settle at 150 FSB, your DDR266 will be running as DDR300. You can test it with its given SPD values and if not stable you can reduce CAS setting one step, i.e. from CAS2.5 to CAS3. If none of these are possible, you can upgrade with DDR400.
I use Vantec Fan card with my GF4, but it did not help me increase my overclock. However, I removed the fan on my GF4 (heat sink is not removed just the fan) after trying to increase the overclock. Vantec Fan card is much more silent compared to the Thermaltake fan and copper heat sink combo. I still can overclock as before but do not need to put up with the noise of Thermaltake fan.
Hope this helps
My Config:
MSI GNB Max FISR
P4 3.06 HT (SL6PG) (oc 3.45@600)
2X KVR DDR333 CAS2.5 (running as DDR300 2-3-3-6 timings)
Compro Personal Cinema GF4-Ti4200 64MB (oc 285/570)
SB Live!
DLink 802.11b wireless PCI
Seagate 80GB EIDE (Windows XP SP2)
WD 30GB EIDE (Slackware Linux current)
NEC 4X DVDR/RW
Sony 16X DVDROM
etc -
MSI GNB Max (MS-6565): insufficient voltage
I have just installed my new GNB Max, and got XP Pro up and running. Upon installing PC Alert 4, I recieved a warning that the +3.3V was actually sub 3V(2.9+V). What effect will this have? And what kind of Variance should I tolerate?
Many thanks.My GNB Max + Antec true power 430 read 3.33.
Sounds like a power supply not handling the load.
Acceptable tolerance in the PC industry is +-5% (3.135 is therfor the lower limit) -
en
I´ll check the messages. Elements 4.0.
Peter
9 dec 2014 kl. 18.44 skrev Jeff A Wright:
I have an I-mac with Max OS X vers. 10.6.8. Have tried to install both an old Photoshop 7.0 and an Photoshop Elements but it does not work. 7.0 I bought many years ago end the Elements came with a Canon scanner. What to do? Regards Peter Lindgren
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Peter Lindgren do you receive any specific error messages when you attempt to install Photoshop 7 or Photoshop Elements? What version of Photoshop Elements are you installing?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6999366#6999366 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6999366#6999366
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
I reinstalled microsoft word and now have a copy that will not work that is the default
I reinstalled microsoft word and now have a copy that will not work that is the default
I have MS word 2008 for MAC version 12.1
When I left click the MS word applications that is the default seems to be corrupted as indicated by the message below but when I right click i can select the second MS word application that works. The message from the left click is
Process: Microsoft Word [10367]
Path: /Users/geralddowling/Library/Mail Downloads/Microsoft Word.app/Contents/MacOS/Microsoft Word
Identifier: com.microsoft.Word
Version: ??? (???)
Build Info: Unknown-80409~0
Code Type: X86 (Native)
Parent Process: launchd [128]
Date/Time: 2011-07-25 17:25:09.413 -0400
OS Version: Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report: 166920 sec
Crashes Since Last Report: 5
Per-App Crashes Since Last Report: 5
Anonymous UUID: 1C5621D4-1D85-488D-A24C-CB298759DBC6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/MicrosoftComponentPlugin.framework/Versions/12/M icrosoftComponentPlugin
Referenced from: /Users/geralddowling/Library/Mail Downloads/Microsoft Word.app/Contents/MacOS/Microsoft Word
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 8 GB, SMC 1.53f13
Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 2.1.14.5
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528ASQ, 931.51 GB
Serial ATA Device: HL-DT-ST DVDRW GA11N
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0x24300000
USB Device: Cruzer Mini, 0x0781 (SanDisk Corporation), 0x5150, 0x24310000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0x24320000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0x24400000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26500000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: Back-UPS ES 750 FW:841.I3 .D USB FW:I3, 0x051d (American Power Conversion), 0x0002, 0x06400000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000 -
Missing PCI to Cardbus Bridge driver
HI, all.
I just bought a Lenovo T30 on eBay, with WinXp Pro installed.
The service partition is gone, as nothing happens when I try to invoke system recovery when the IBM screen appears at startup.
In Device Manager, the PCI to Cardbus Bridge is highlighted with a question mark, and a request for a driver appears every time I start Windows. I can't find a driver anywhere.
The system also doesn't detect the mini-PCI wireless card I just installed. Are the two problems related?
I tried installing and running System Update, but it stops with an error: "Not enough disk space"
Could anyone help me solve these problems?
Thanks.
DanYes, sure. I'm trying to use all of five PCI slots, and after slot chnge I,m setting Reset Configuration data in BIOS.
result is the same in all Card positions. Card is detected, but not working corectly.
I'm trying to resolve any hardware conflicts by disabling all od internal mothebrord components like IEE1394 Audio, Serial Ata and others - no cahnges, no solutions .... -
Sound Blaster X-FI Pci Express Front Panel Not working right Win7
ASound Blaster X-FI Pci Express Front Panel Not working right Win7
Please read carefully
Part number Part SB040
Hello,
I have a fresh install of Win7x64 OEM. First, I want to say that I have "AUTOMATICALLY MUTE SPEAKERS" UNCHECKED under the Headphone detection tab. I have tried "Automatically Enable Headphone Settings" checked or unchecked. No difference.
As soon as I plug in headphones to the front panel connector , the speakers in the mixer say "disconnected" (see below) and the SPDIF becomes the default output. There is no way for me to change this. And there isn't any sound coming from the headphones when plugged into the front panel. (the mic front panel works fine)
I am using the nati've Win7 drivers for the card. Apparently the Win 7 drivers on your site are older than the nati've ones.
This worked fine in Windows XP 32. Any ideas.Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out. -
I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?
IF it is a manufacturing defect and you bought the device from Apple or an authorized Apple retailer, then take it into Apple.
-
I am signed into the App Store on my iphone 4 and one of my apps need updating and my brother is signed into it because I didn't have any credit to make an ID so he signed in so I could download apps but its like its locked to his Apple ID I have tried signing out and turning my phone off its just not working please help.
Apps are locked to the Apple ID that was used to download them. You will have to sign in as your brother in order to update it.
-
I'm trying to connect my iPad to my tv so that I can mirror whatever is on my iPad. I want to stream movies online and watch on the tv. I have the digital av adapter and an hdmi cable but it's not working. Any tips ?
If this is an iPad 1, it won't mirror, but it will still output video from the 30 Pin dock connector.
If your new TV has a conventional VGA in and stereo inputs you can try this connector.
http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=3a
I used to stream video from both Netflix and YouTube and from my Mac using iTunes sharing through my iPad then with this connector plug into my iPad and TV.
It won't be high resolution, but it will get you picture from iPad to TV.
Good Luck. -
Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga
If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.
-
I updated my ad to iOS 6 and now my App Store app does not work, how can I get it back
I updated my iPad 2 with the latest iOS 6 and now my App Store application does not work right. The only part that does work is the genius, and the purchased, but I cannot search for any new apps now have the categories come up. I don't know how else to search for apps, and I don't know how to download this as it was pre installed.
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off". -
Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page..
[BUG FIXED, see "EDIT 2" at the end of my post]
I'm on Firefox 3.6.21, and I got this problem today after a Greasemonkey update (To version 0.9.10, apparently).
Disabling Greasemonkey solved the problem, and re-enabling it reproduced the problem (middle-clicking links to open in new tab did not work, merely highlighted the link).
I should also note that while Greasemonkey was enabled and the bug was affecting me, Ctrl+Click to open links in new tabs was also broken.
I hope this helps!
EDIT: It appears this is a known incompatibility/conflict bug between current versions of Greasemonkey and Tab Mix Plus. Read more here:
https://github.com/greasemonkey/greasemonkey/issues/1406
EDIT 2: GREASEMONKEY HAS NOW BEEN UPDATED with a workaround to fix the problem. Go to https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/versions/ to install the update manually. It hasn't been reviewed by Mozilla yet, so it won't be an automatic update for another day or two. All credit to "cannonfodder" below for noticing this; please mark his post as helpful!
Maybe you are looking for
-
How to Use the JAVA SCRIPT code in .htm page of the component
Hi . In my requirement i have to use Java Script Function in .htm code ..how to use the java script code and functions in .htm??? thank you B.Mani
-
Not sure how where to post this suggestion to Apple, but wouldn't it make more sense to import patch names for Devices, more "up stream" into the Audio Midi Setup, rather than LogicPro9? This would then make patch names available for any software "tr
-
New Macbook + 320gb WD = Problem
Hi, i just got the new macbook 2ghz and bought a 320gb WD 5400/min hard drive. It works just fine except for the fact that it makes a sound every 5 - 30sec when the hdd is not in use. "clack" ... 5 sec ... "clack" ... 30 sec ... "clack" ... 10 sec ..
-
This topic has been moved to Anything Under The Sun. https://forum-en.msi.com/index.php?topic=253435.0
-
Host name on SSL certificate did not match the alias name in the URL addres
To the XI gurus, One of our vendors had problem to send us xml invoices because the url address had our server alias name and the SSL certificate we asked them to install had the server name. To resolve this issue, can we install two certificates (on