MSI GT60-0NC SCM Bluetooth Problem!

I own a MSI GT60-0NC Notebook. I have made a clean install of Windows 8 Pro. After that I installed SCM. But I have a problem. When I run SCM, bluetooth enters an endless loop which turns on and of with 1 second of delay without touching. What can cause this? Should I update BIOS? It will be my last choice though. Thanks in advance

I had the SAME Problem with a GT70 bought on the 13.9.13!
I update BIOS & EC!
Now there is no loop, but i cant activate or deactivate BT. Win8 sasy its on, but no LED!
Think this is a big BUG from MSI.
At the old BIOS version you can uninstall SCM and reinstall KLM, than it works but no ECO/Fly Shortcut.
With the new BIOS & EC the shortcuts work fine after clean install without SCM but no ECO & Fly shortcut. With SCM there is the BT issue and after deinstalling SCM no shortcuts work any more.
MSI PLZ fix it!
Place: Austria
Edit:
I tried it with the KLM & SCM NEW Version from the GT70 Dragon Extrem 2 Edition.......
Same BT Issiu -.-

Similar Messages

CONSIDER UPGRADING HARD DISK OF MSI GT60-0NC

I had bought my new MSI GT60-0NC recently in Malaysia. My com is equipped with 750GB 7200rpm hdd, probably sata maybe.
So far I am satisfied and indeed quite impressed with its performance. Who knows maybe after few years my specs will soon outdated and cant cope with my requirements for performance?
I would like to seek for some guidance for upgrading hdd to other type of hard disk drives like ssd or raid-II.
Is any kind of SSD hard drive can be installed on the laptop? Any brand recommendations for ssd or hybrid hard disk drives?
Thanks a lot.

It's really hit or miss with most SSD's for some reason.
I've seen a few people who got Samsung 840 non-PRO/PRO drives have problems, and some who had no problems.
Personally, I've got the super raid adapter and have 2 x Mushkin Atlas Deluxe mSATA 240GB drives in my laptop, and it work great.
I've had a few people with Intel 520 based drives have problems as well.
Personally, I would find what you want and try it out. If it doesn't work, you may have to return it though. Everything SHOULD work, but it's not always the case unfortunately.

Unlocked msi gt60 0nc BIOS which is compatible with nvidia 5xx graphic cards

hey guyz i m looking for unlocked BIOS for my msi gt60 0nc. so i may install alienware m18xr2 gtx 580m in my notebook

you have flashed to the wrong one..
.4xx is the correct one based on your BIOS version used
http://www.msi.com/support/nb/GT60-0NC.html#down-firmware&Win7 64
Quote from: player.gamer.881 on 21-March-15, 00:12:22
now should i flash my bios or not?
cuz i've made all arrangement like making bootable usb etc..
yes, bios flash may help eventually to the latest version

MSI GT60-0NC Paging File Size Help!

I'm having issues with my laptop (http://www.msi.com/product/nb/GT60-0NC.html#/?div=Overview) after messing with the paging file settings. I'm wondering what the default values are for this particular laptop.
I'm not sure what it was before I started messing with it, but after I changed it my benchmark for 3d renderings (architectural visualizations done through maxwell render) have dropped more than significantly.
While rendering, my physical memory usage is about 95%, my CPU usage is only 4% (which should be between 70-90%), and my Disk usage is 100%. Disk usage must be my problem, because when I check the resource monitor my the system is writing about 10,000,000 B/sec to the pagefile, while maxwell is reading about 13,000,000 B/sec from the pagefile. This read / write of the pagefile keeps my disk usage at 100% throughout the render.
If I allow windows to "automatically manage the paging file size for all drives," it allocates 12288 to drive C: (OS) and none to the other drive in the RAID. Displayed at the bottom is "Minimum allowed: 16 MB; Recommended: 5107 MB; Currently allocated: 12288 MB"
What started the problem is when I went to manually manage the pagefile myself, and moved the paging file to the other RAID drive (D:), and ever since I haven't been able to render properly. I'm trying to isolate my problem, and this is the only significant change I made to this system since it was able to render correctly, other than removing it's ability to hibernate.
Anyone have any advice? My first step was to allow windows to automatically control the pagefile again, and its back on the C drive, but the problem still persists. I also did a system restore to a date before I made these changes, and that didn't help either.
Thanks in advance for any help!

Quote from: thaBadfish on 05-January-13, 03:22:34
Thanks for the response.
Both drives in my raid are HDD, and are set to defragment weekly. Defragmenter says it was last run today, and they are both 0% fragmented.
Update:
My issue ended up being a corrupt scene file (for the rendering program), which once I rewrote the scene the problem has disappeared. Disk usage is back to very low, and CPU usage is back to 100% where it should be during a rendering. Slowdown was associated with the corrupt file causing me to hit the limit of my physical memory, which caused the major slowdown in reading/writing massive amounts of overflow to the pagefile.
That's great. Atleast you know what the problem was and know how to solve it next time!

MSI gt60 Bigfoot KIller 1202 problem

Hi, I'm having an issue on my MSI gt60 and some help would be highly appreciated!
Even after the installation of the drivers I can't connect either with the cable or in wifi
(bluetooth seems to work fine).
I had to make a clean windows 7 installation with a dvd that I already had.
I have the Bigfoot Network Killer Wireless 1202 on my laptop and before it worked quite fine. It worked fine also in another clean windows 7 installation that i made few days ago,but not this time. What can I do?
Thank you in advance, good day!

I have heard about connection issues (Messenger, Game for Windows, Itunes and other) with the onboard Killer E2200 Lan before.
This was caused by an old Killer Network Manager version.
The new Killer E2200 driver v6.1.0.395 should solve this.
Download it here:
http://www.killergaming.com/support/Downloads?category=3&model=123&download_type=1&os=7
Also contains drivers for Killer Wireless 1202.
Make sure you uninstall the old Killer driver and application before installing the new.

MSI GT60 0ND 675M Throttling Problem (NEED HELP)

Hello MSI Forum
I have 2 year old MSI GT60 0ND with Intel i7-3630QM and Nvidia GTX 675M with 2GB GDDR5 memory.
My problem is focused to all games. After few minutes playing game fps starts to drop frequently under 30 fps.
But after few seconds it comes back to normal state.
I have cleaned fan from dust and it doesnt have any effect. Also running fan on turbo mode doesnt have any noticable effect.
- Never updated bios
- Running Windows 8.1
- Always updating drivers.
- Intel speedstep is disabled, no effect.
I think its problem with CPU throttling but i cant find any thread to help with issue.
Anyone can help me?
Thx in advance!

Hi ijimma,
1. Does the problem happen recently? If so, then maybe some driver or system update has caused the problem.
2. Check the FAQ and see if turning off the HDD power saving function. (http://www.msi.com/faq/nb-977.html)
3. What's the current graphics driver version? (this msi tool helps to export all driver version and installed programs, so sharing the text file to us can let us know better about your system environment.)

MSI GT60 0NC Erratic Touchpad

I just purchased a GT60 laptop and there was an immediate issue with the touchpad. The cursor moves very erratically, often jumping from one place to another. Control is very limited. I've uninstalled and reinstalled the touchpad drivers including the latest synaptic drivers to no avail. I've run the laptop under safe mode and the problem persists. I've also done a full system restore and there has been no solution. I would greatly appreciate some advice as I am getting very discouraged with my new purchase, I'm starting to believe it is a hardware issue.

Quote from: Tiger on 16-August-13, 06:29:08
purchased my first MSI GT60 for business vs gaming due to many of the great features in June 2012 ... exchanged computers a few months later - not functioning properly.
Right now, I am very frustrated with MSI, after doing a lot of research into purchasing this "deluxe" laptop, I am regretting this selection and fed up for the wasted time - which I would like to charge back to MSI for lost productivity.
Not long into the 2nd MSI GT60 started to experience:
a) cursor bouncing around - I don't have time to play "let's find the cursor" and once you find it, play "let's find what words/sentences it changed when it hopped elsewhere on the page".
b) slowness!!! ??? how on earth with 12 G RAM, a brand spanking new i7 processor and 1 T hd - which had NO DATA transferred and stored on it (using external back up and 30 G usb) was it slow????
c) " S bar stopped loading and working
d) intel turbo booster stopped working
e) my on screen keyboard stopped working
f) mouse touch pad nor an external mouse was intermittently working ... when it felt like it, it would come around
g) moving from WORD to EXCEL, the pages would temporarily freeze
h) oddly I couldn't edit documents in WORD that I copied into, so I could highlight and color code.
i) I tried to back up my Outlook emails - system could not find the .pst folder!
I took it in for a 1 year service check - what should have been guaranteed 5 business days turned into 9 days - not impressed.
They had to re-install Windows 7 and "apparently kept it to see if it would act up, of course a phone call would have been nice, except it didn't happen, not impressed.
NOW the cursor has some kind of dial that suddenly pops up AND TOTALLY FREEZES on the page ... no cando anything until "it" decides when the game has caused "enough" frustration. This too is intermittent. All is fine and you're working away and suddenly full tilt stop!
and it just did the NEXT thing that is driving me over the deep end ... the cursor suddenly CHANGES FONT SIZES .... ALWAYS SMALLER to TINIEST and this is where it stops - barely legible on the page and I can't find where the friggin' size thing is to change it or TURN IT OFF!
I have called the Tech twice now for the same problem and I have only had it back barely 3 weeks and I didn't even call him immediately when it started to happen!!
Today I was over the top when he told me to disable the mouse pad and see if that works ... it's a lap top .... if the mouse pad doesn't function, there's a problem.
To have these problems in the first year - it is DEFECTIVE!! and once again the voodoo Font Monster has taken over and I can barely see this script!
Frustration and fed up!
My blood pressure is boiling beyond e
Sorry you had such a bad experience, but I highly doubt all this was caused by hardware.
Did you bother doing anything to try and troubleshoot the problem? Was the CPU overheating? Did you look at the temperatures?
A number of the problems you seem to indicate, really point more towards there being a very bad virus or trojan installed on it. That laptop shouldn't slow down that much, and even my GT70 (which has been flawless) works great and its nearly the exact same laptop.
I really think the problem is not as you suggest.
Lastly, the simple fact that a single user is having a problem like this, and it's not widespread, really is indicative of it being something due to the user and not due to the design/manufacture of the laptop, unless it's a heat problem with the CPU.

Not getting enough performance out of Msi GT60 0NC

Hello there guys! Since I've got my laptop I have been getting the feeling that I am not getting enough power out of my toy. I dont know if its me who have too big expectations about this laptop or it really should be performing better?:( I have done hours of research regarding drivers, graphic setup and not at least overclocking which seems to raise the performance quite a bit but it easily gets unstable. I am using Msi's preinstalled drivers as it seems like they give the best performance so far. I have also installed the modded Firmware from https://forum-en.msi.com/index.php?topic=162629.0 which works better than the original one from Msi. But still, i hear a lot of people playing demanding games on ultra with fps around 50-60. In bf3 I get around 40-60 on High with shadow on medium and post processing off, anti-aliasing off. Turbo is on + overclock. The performance in Gw2 is even worse.
So here is my question: am I expecting too much from the laptop or can I do something to improve it and make it run like a charm? Another question would be if it is possible to change powervoltage to get a higher overclock?
I would very much like to hear from u guys how your msi gt60 is performing:)
Best regards, Mathias Kanstrup

Quote from: zipper.sippola on 18-September-13, 17:57:49
Same here, Gt70 0NE + 680M; overclocking GPU core causes clockdowns so gains are minimal. Overclocking memory is successful upto about 2500MHz but gains are small as the memory isn't the restricting factor in preformance - or the effect is just minuscule. So mostly 2 to 8 % in benchmarks, max.
With extreme air cooling and a modified VBios, it's possible to get up to around 15%......I know this first hand.
I just don't care to do it since there's little point in pushing the hardware that hard regularly. Yes, it's great for bragging rights, but it's not useful for long term use unfortunately.
Overclocking the memory in the GTX675M might help a bit more than in the 680M. I'm not sure, I haven't really followed up on the other cards.

MSI GT60 Destroyer 424 Mic Problems

Hello everyone,
I picked up a MSI GT60 online from Best Buy a couple of weeks ago. I have been searching the forums, reddit, etc. for posts about the internal mic having issues with buzzing all time.
I would really like to find a way to fix this, because using the built in microphone would make the most sense. Otherwise, I figured (from what I read) that I would have to purchase a USB headset.
Does anyone have any workarounds or tips on how to improve the quality of the built in microphone or reduce the static/buzz noises?
Thanks for your time.

First thing I'd try is the EC reset procedure.
1. Turn off computer
2. remove AC adapter
3. remove battery
4. leave laptop alone for 10 minutes
5. install battery
6. install AC
7. Turn on computer and see if it's fixed
This isn't guaranteed to fix it, but it's a start.
By the sound of it though, there might be more issues than just a simple EC reset.
If the EC reset doesn't fix it, then I would contact MSI and possibly consider an RMA.
>>How to contact MSI.<<

Request : MSI GT60-0NC

Hi,
I'm requesting an unlocked BIOS for my GT60-0NC
Current BIOS version is latest, Windows 7 non RAID : E16F3IMS.10U
Also, what amount shall I donate?

think we figured

MSI GT60-0NC-004US BIOS UNLOCK Request

Dear Svet,
I’m Brazilian and I own a MSI GT60, I bought it at EUA in August 2012.
I’ve searched a lot about GPU upgrades and I’d like to try.
However I’d like to talk with one of the best in BIOS mod, and this guy are you.
I’d like to update my currently GTX 670M to a 970M.
It’s not sure, First I need to buy this card here in Brazil, since there’s a probability that the card fail.
But in parallel I’m talking with you about the BIOS update that I’ll need anyway.
Current BIOS: E16F3IMS.10U
Current EC: 16F3EMS1.414
My GT60 came with Windows 7 pre-installed
Is this BIOS the latest available for it?
Is there any safe way to update the BIOS to the Windows 8 Version?
Because I’ve heard about the BIOS version E16F3IMS.51X and its compatibility seems to be better.
Do I need to update the firmware? Which version?
Is there any way to personalize the temperature x fan speed curve?
I’d like to set FAN speed to max above 75°C.
How much will this cost me?
Feel free to contact me via PM.
I’ll be waiting for you answer.
Thank you very much.
DMTwo

check PM
Quote
Current BIOS: E16F3IMS.10U
Current EC: 16F3EMS1.414
My GT60 came with Windows 7 pre-installed
Is this BIOS the latest available for it?
yes for Win7 based bios, but if you want to add 970M card , 5.xx, 7.xx will be required
Quote
I’d like to update my currently GTX 670M to a 970M.
It’s not sure, First I need to buy this card here in Brazil, since there’s a probability that the card fail.
But in parallel I’m talking with you about the BIOS update that I’ll need anyway.
Is there any safe way to update the BIOS to the Windows 8 Version?
Because I’ve heard about the BIOS version E16F3IMS.51X and its compatibility seems to be better.
by standard way
Quote
How much will this cost me?
nothing as they are official versions,
unless you want me to unlock or mod them
Quote
Is there any way to personalize the temperature x fan speed curve?
I’d like to set FAN speed to max above 75°C.
yes eventually, check PM for details

[MSI GT60 0NC] WEBCAM and Mic Problem

Hello,
I have a problem with my webcam and mic.
- People hear me from really far when I use skype even if i talk with a 1cm distance from the mic.
- The webcam is not detected by skype or msn. When I go to the device manager there is no (!).
Can you help me ?
Thanks
Teddy

Thanks a lot ! I have never noticed this webcam key (F6) !!!
I tried to boost up the mic but didn't work. I am trying to d/l the latest realtek drivers and I will let you know.

MSI GT60 0NC throttle problems with BD PROCHOT enabled

MSI swapped my broken Nvidia GTX 670M for a 870M and flashed a new BIOS. My Intel I7 3610QM processor now throttles down to about 1.17 Ghz in games causing the games to be unplayable. This didn't happen before sending it to MSI. I've send it back already but MSI said they couldn't find anything.
So I went and looked for a solution myself and found that disabling BD PROCHOT with Throttlestop 7b3 prevents the CPU from throttling. I tested this and this works perfectly.
My question is this:
Is this safe to use as a permanent fix, or is there an alternative?
It's stupid I need software for this, can't this be done with a BIOS update/fix?
BIOS version is E16F3IMS.51X

The CPU temperature varies from 45 to about 89 degrees Celcius. The CPU throttles at random temperatures, it doesn't need to get too hot to do this which doesn't make sense. It only happens when I'm intensively using my GPU and CPU at the same time.
Depending on the amount of cores used it repeatedly dips from 2.3 Ghz or 3.1 Ghz to 1.17 Ghz and immediately goes back up. It's like watching a video get paused and played repeatedly, making it impossible to play anything.
I have this in League of Legends, Battlefield 4, Company of Heroes 2, Total War: Rome 2, War Thunder and Age of Empires 2 HD. Haven't tested other games but I think it's safe to say they will give resembling results.
I'm using the latest Nvidia driver 344.75 but had similar results with older compatible drivers.
While we're at it, do you know if MSI's battery calibration tool actually works? I only get like half an hour of browsing with chrome on battery before the laptop shuts down and I would like to get this resolved

MSI GT70-0NC SCM Error

Hi im new here
I have a GT70-0NC with windows 8 x64 installed on it.
Yesterday i installed te SCM software so i would be able to use the P1 button.. But whenever the SCM starts up it gives me the following error (the error is in dutch idk if that is a problem...).
Quote
************** Tekst van uitzondering **************
System.TypeLoadException: Kan type WPFOSD.CGetDeviceCount niet laden vanuit assembly WPFOSD, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null.
bij MSI.SCM.SCMII.CheckMouseDeviceClass(Boolean CheckFirst)
bij MSI.SCM.SCMII.MainForm_Load(Object sender, EventArgs e)
bij System.Windows.Forms.Form.OnLoad(EventArgs e)
bij System.Windows.Forms.Control.CreateCont rol(Boolean fIgnoreVisible)
bij System.Windows.Forms.Control.CreateCont rol()
bij System.Windows.Forms.Control.WmShowWind ow(Message& m)
bij System.Windows.Forms.Control.WndProc(Message& m)
bij System.Windows.Forms.Form.WndProc(Message& m)
bij MSI.SCM.SCMII.WndProc(Message& m)
bij System.Windows.Forms.NativeWindow.Callb ack(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Geladen assembly's **************
mscorlib
Assembly-versie: 4.0.0.0
Win32-versie: 4.0.30319.18033 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
SCM
Assembly-versie: 10.13.3016.0
Win32-versie: 10.013.03016.0
CodeBase: file:///C:/Program%20Files%20(x86)/SCM/SCM.exe
System.Windows.Forms
Assembly-versie: 4.0.0.0
Win32-versie: 4.0.30319.18037 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System.Drawing
Assembly-versie: 4.0.0.0
Win32-versie: 4.0.30319.18022 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System
Assembly-versie: 4.0.0.0
Win32-versie: 4.0.30319.18033 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
WPFOSD
Assembly-versie: 1.0.0.0
Win32-versie: 1.0.0.0
CodeBase: file:///C:/Program%20Files%20(x86)/SCM/WPFOSD.DLL
PresentationFramework
Assembly-versie: 4.0.0.0
Win32-versie: 4.0.30319.18033
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/PresentationFramework/v4.0_4.0.0.0__31bf3856ad364e35/PresentationFramework.dll
WindowsBase
Assembly-versie: 4.0.0.0
Win32-versie: 4.0.30319.18033 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/WindowsBase/v4.0_4.0.0.0__31bf3856ad364e35/WindowsBase.dll
PresentationCore
Assembly-versie: 4.0.0.0
Win32-versie: 4.0.30319.18033 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/PresentationCore/v4.0_4.0.0.0__31bf3856ad364e35/PresentationCore.dll
System.Configuration
Assembly-versie: 4.0.0.0
Win32-versie: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
Assembly-versie: 4.0.0.0
Win32-versie: 4.0.30319.18033 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
System.Management
Assembly-versie: 4.0.0.0
Win32-versie: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Management/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Management.dll
MSIECO
Assembly-versie: 1.0.1005.2001
Win32-versie: 1.0.1005.2001
CodeBase: file:///C:/Program%20Files%20(x86)/SCM/MSIECO.DLL
System.Windows.Forms.resources
Assembly-versie: 4.0.0.0
Win32-versie: 4.0.30319.18010 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms.resources/v4.0_4.0.0.0_nl_b77a5c561934e089/System.Windows.Forms.resources.dll
mscorlib.resources
Assembly-versie: 4.0.0.0
Win32-versie: 4.0.30319.18010 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/mscorlib.resources/v4.0_4.0.0.0_nl_b77a5c561934e089/mscorlib.resources.dll
************** JIT-foutopsporing **************
Als u JIT-foutopsporing wilt inschakelen, moet in het configuratiebestand voor deze
toepassing of computer (machine.config) de waarde
jitDebugging in het gedeelte system.windows.forms zijn ingesteld.
De toepassing moet ook zijn gecompileerd terwijl foutopsporing
was ingeschakeld.
Bijvoorbeeld:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
And looks like this:

have you installed all the visual C++ redistributions from microsoft? Also I've had the same problem as you do but after "cross" installing the program (mine came with win 7 so their instruction is to install version 10.212.11060) to 10.013.03016, I do believe cross installing these version solves the problem. Also, go into C:\Users\jason\AppData\Local\MSI\SCM.exe_Url_zv0ikcohnhzptbjtykvepncdk0ijftla\(version number) and delete the user.config file, this file will be recreated when running the SCM again and should not be currupted

Need help with MSI GT70 0NC-029NE bluescreen problems

I've just bought this new MSI computer, and downloaded a few programs like skype, steam, origins etc. When I open all of them at the same time, the bluescreen appears saying; memory management. The computer has 8gb ram, so it shouldnt really be a problem.
Would really be nice with some help on this as it is quite annoying

Quote
The computer has 8gb ram, so it shouldnt really be a problem.
The amount of memory is not the problem, but a fault with the memory, or the memory controller (in the CPU) could be the problem.
Is there a particular program that causes this BSOD?

MSI GT60-0NC SCM Bluetooth Problem!

Similar Messages

Maybe you are looking for