MSI GT60 0ND 675M Throttling Problem (NEED HELP)

Hello MSI Forum
I have 2 year old MSI GT60 0ND with Intel i7-3630QM and Nvidia GTX 675M with 2GB GDDR5 memory.
My problem is focused to all games. After few minutes playing game fps starts to drop frequently under 30 fps.
But after few seconds it comes back to normal state.
I have cleaned fan from dust and it doesnt have any effect. Also running fan on turbo mode doesnt have any noticable effect.
- Never updated bios
- Running Windows 8.1
- Always updating drivers.
- Intel speedstep is disabled, no effect.
I think its problem with CPU throttling but i cant find any thread to help with issue.
Anyone can help me?
Thx in advance!

Hi ijimma,
1. Does the problem happen recently? If so, then maybe some driver or system update has caused the problem.
2. Check the FAQ and see if turning off the HDD power saving function. (http://www.msi.com/faq/nb-977.html)
3. What's the current graphics driver version? (this msi tool helps to export all driver version and installed programs, so sharing the text file to us can let us know better about your system environment.)

Similar Messages

MSI K7N2 Delta-ILSR MB Problems, Need Help ASAP!! PLEASE

Ok I just got this motherboard (MSI K7N2 Delta) Yesterday and after getting it setup I began overclocking the Processor (an AMD Athlon XP Barton Mobile 2500+) I was at 11x 215 1.750V Perfectly. I moved to 216 it started to seem unstable so I pushed the VCORE up to 1.775 and tried 217. It couldn't boot so I dropped it back down and decided ok 208 and a 11.5 multi might get me past the 2.4 mark which I was looking for. Well when I changed the Multi. to 11.5 and said save the system just sate as the flashing y for save. I could not change it to n I had already pushed enter So i firgured great and left it alone for a few minutes, nothing so I reset it. Now it refuses to boot/post. It spinds the fans the HD's the Network port is going but I get no picture. I have cleared the CMOS using the jumper I have removed the battery and power for over an hour and I still get nothing. I am assuming this is a BIOS error but I am not sure what to do to fix it. Does anyone here kno maybe, something I have yet to try something I can do? I would hate to RMA it and have to wait on newegg. Hell the thing is a day old. So please any idea's are welcome I have this posted on the Hard Forums as well but I am hopinh this forum may be more popular with getting help as no one is helping over there. Thanks!

Hi,
Cross: Just in case you are doing something wrong there's a clear CMOS guide here, follow it to the letter (and don't forget to put the FSB jumper to SAFE beforehand - there's a note about it in the guide).
How To Clear the CMOS
Your system board or CPU maybe not be dead yet - I had a similar problem with one of my boards and I tried everything - to cut a long story short I eventually got it working!!!
Btw, If you can't boot or get into the BIOS put your other CPU in (clear BIOS again after fitting!), so that you can prove whether your motherboard is working correctly!
Good luck! I'm off ta bed!
Axel

MSI GT60 0ND Restore Windows 8 DVD

Hi everyone, today i tryed to install Ubuntu on my MSI GT60 0ND, just for fun. After 2 days of using, I wanted to get back to Windows 8. I started to restore via msi restore disks. And found that 3rd disk is damaged.
I tryed to restore the disk. Copyed the OSImg3.swm, and noticed that just 0405, 0409, 0445 files are damaged.
So please guys who can upload 3rd disk or know the way to fix my problem please answer.
I need only 3rd disk, total disk quantity is 5.
My notebook model is MSI GT60 0ND-286CZ:
Intel Core i7 3630QM
RAM 12GB DDR3
NVIDIA GTX 675M 2GB
64 + 64 SSD RAID 0 (Super Raid)
750 GB 7400 rmp hdd

Easier to say which ones NOT to install.
http://www.msi.com/product/nb/GT60-0NC.html#/?div=Driver&os=Win8%2064
Don't install the Raid drivers unless you use raid.
Start with the Chipset, Intel Management Engine Drivers then install the others one by one depending on which devices your laptop is equipped.

Hi Everyone Im New, Got Question About Upgrading MSI GT60 0ND With SSD

Hi Everyone I'm New, Got Question About Upgrading MSI GT60 0ND With SSD.
:welcome:So As I've stated I'm new here, or at least got a new MSI notebook.
Ive got the new MSI gt60 0ND with 750GB HD and 675 Ge-Force GTX , anyways to the bottom line.
I would like to Upgrade my computer with SSD that I bought and install the win8 on it, in order to speed things up, but I have encountered a few problems..
1. there is no sticker on the back of the computer that gives information about the serial number of my windows 8...
2. lets say in some magical way I could get the serial number out, can I use it to reinstall ? because Ive heard that you cannot use this CD key anyways unless you got a special win8 installation CD key from MSI because its MSI branded windows 8.
am I screwed ? ?? ? I thought it is possible to upgrade with SSD but it seems like MSI made it very hard, I do not understand why they even putted the warranty void sticker on the expansion bay's .... WEIRD..
Please help !! Thanks in advance,
David

Quote from: dudiz10 on 10-January-13, 19:20:54
Hi Everyone I'm New, Got Question About Upgrading MSI GT60 0ND With SSD.
:welcome:So As I've stated I'm new here, or at least got a new MSI notebook.
Ive got the new MSI gt60 0ND with 750GB HD and 675 Ge-Force GTX , anyways to the bottom line.
I would like to Upgrade my computer with SSD that I bought and install the win8 on it, in order to speed things up, but I have encountered a few problems..
1. there is no sticker on the back of the computer that gives information about the serial number of my windows 8...
2. lets say in some magical way I could get the serial number out, can I use it to reinstall ? because Ive heard that you cannot use this CD key anyways unless you got a special win8 installation CD key from MSI because its MSI branded windows 8.
am I screwed ? ?? ? I thought it is possible to upgrade with SSD but it seems like MSI made it very hard, I do not understand why they even putted the warranty void sticker on the expansion bay's .... WEIRD..
Please help !! Thanks in advance,
David
I think serial key of windows is in your bios which you cannot See however it should be automatically activates windows

MSI GT60 0ND - Time to upgrade?

Hi Guys,
So...after a long time i was inactive coz of work and other stressing stuff i'm back...starting with a question ofcourse :P ...
anyways guys i want to share you with somthing..after a year with my MSI GT60 0nd i started to notice some LAG and low FPS in some games.. (BattleField 4 and such), and now i'm really trying to think what to do if to buy a new one.. ? or try upgrading the one i already own from GPU 675GTX to the 780GTX or 765...
anyhow i really want to know if that's possible and if any one here has already done that...
Also !! is it possible to upgrade the CPU ? ? to the new gen 4700 ?? i know already now that the chances it can happen are low but i'm not sure so i'm asking...Thanks guys!!

Quote from: dudiz10 on 28-January-14, 08:28:58
Hey Dark Hawk,
sorry for the time it took me to replay.
Thanks for the time you took to answer me, i really dont want to purchase a new laptop right now and i do want to upgrade it.
i dont know where to buy an mobile gpu(770gtx or 780) is there any place that sells those and ships? how much should it cost ?
regarding to the cpu i would be glad if you could tell me if i could get to a really major improvment or its a waste of time.. ?
Thanks again, i appriciate it alot!
The CPU is most likely not worth the cost to replace it, to be perfectly honest. You COULD do it, and you might see a slight performance increase, but not like going from a 3910 to a 4700 or something.
The GPU upgrade will help the most. You should be able to technically handle a GTX780M, provided you have at least a 180W power supply. You can get those from Ebay or resellers. You might be able to get one straight from MSI as well.

MSI Gt60 0nd wont recognize USB 3.0 mass storage device (WD)

Hi all
my notebook MSI Gt60 0ND wont recognize USB 3.0 mass storage device (WD), Western digital my passport 1TB USB 3.0 \ USB 2.0Compatible.
i connect the WD my passport to the SS USB 3.0 but it wont be recognized it only gives it electricity to spin but that's it, on the other hand if i connect it to the USB2.0 it is recognized.
i installed all the drivers from MSI to this computer the Intel USB 3.0 and the Intel chipset which are the only drivers that can be related to this.
i use windows 7, even when i had windows 8 it didn't work.
i tried upgrading the Western digital my passport firmware and even got the software thought that maybe it could help but still no luck.. any one got any idea for a solution ?
Thanks in advance,
David.

Does anything else work when you plug it into your USB 3.0 port? How about a mouse? Keyboard? Another USB Flash drive?
If nothing works in that port, your USB 3.0 port or card is probably bad. RMA time.

MSI GT60 0ND Wont charge.

One Day it World, next Day it dosent charge. I noticed it at 10% so im all out of power. I have tryed diffrent plugs and taking battery out and in again. Nothing seems to work. Does anyone know anything about a similar problem?
Now does warranty cover it not charging?
Also is something wrong with this model? The GT60 0ND, I were just wondering because something else is also wrong, screen driver has stopped responding. And that didn't fix after getting new graphic card, also has some dead pixels. I don't end help for these problems tho. I were just wondering, not complaining every other msi product we had worked perfect. Maybe I'm just unlucky.
Should be noted my PC has a GTX 675MX instead of a GTX 675M because apparently they swapped it around when I send it to warranty, the problem ain't completely gone tho (wich is weird, only happens in Arma 3 and AC4 now. But w/e.)
Not sure if this matters.
Edit: quick question does all msi notebooks use same charger? If not do anyone know wich notebooks use the same as gt60 0nd.
Edit:got a old charger, that works, only does half the power tho, will it just be slower?

So in my search for a new one, i found http://www.batteribyen.dk/stromforsyninger/laptop-baerbar-stromforsyning/msi-stromforsyning/msi-gt780-adapter-stromforsyning-180w wich seems to be the exact same as mine. But it says it wont work for my PC, now if i search for one that will work for my PC, I find 125w wich doesn't seem to make any sense. You guys think I would be able to use the linked one for my PC?
Now if I go look at the gt780 wich the website above says it should work for I see the power adaptor is 150w (http://www.msi.com/product/nb/GT780.html#?div=Specification) now if I go to the website it sells 180w for this PC? Have they gotten something wrong or have I?
This sentence probably doesn't make much sense, sum up.
The adapter I linked is 180w and if you scroll down, you see gt780 is one of the products that the adapter would work for. Now if I go to msi's website the gt780 says that the adapter it needs is 150. And if I search for a adapter for my gt60 0nd, I find 125w but on msi's website it says it needs 180w. Do you guys think I can use the first linked one for my gt60 0nd? The output 9,5a and 19v matches. And it looks the same on the picture although I can't see the written things on the picture.

MSI GT60 Too much heat issue ! help

i have msi gt60 0nc (windows 8.1 x64 / i7-3610QM / gtx 670m / 16G ram / 1T hdd )
and when i play games the gpu and cpu temp retch 80c after less then one hour of gaming like need for speed rivals
and temp increases to reach more then that but i exit the game immediately to cool the gpu/cpu
my turbo and fan is on .. pls help me is that normal/safe or what ?
attaching some pic
thanks

Depending on what model of GT60 you have, 90C isn't terrible.
If you go much higher than 95C I would start worrying, but 90C seems to be about the normal operating temperature of a newer (Core i7 4xxx series + GTX8xx series combo) GT60. Once you start going above 95C you're going to start throttling very quickly.....and that's not good.
Worst case you might want to repaste the CPU and GPU. This is a rather common problem on the notebooks.

[MSI GE60 0ND] VT-X Problem

Hi,
I use Msi GE60 0ND. I need VT-X support for virtualbox. Intel I7 3630QM seems have VT-X support but i can't enable VT-X on bios. There is no option to available it. I checked bios version and it seems up to date.
I need your helps.
BTW i use windows 10 technical preview.

i can use virtual box there is no problem while setup and use it. but i cant enable hardware acceleration and can't add new virtual processors. also i can't install haxm for android development.
btw I use Windows 10 Technical Preview.

Zen Vision:M problem, NEED HELP!

My zen vision:m is starting to run slowly. It started right after my player froze and i reset it.Now its really slow and barely even switches screens sometimes.Right now its just a black screen with the keypad lit up.Whats wrong with it'sI NEED HELP!

johnnnyp wrote:
hi, i have a problem with my creative vision m. i wanted to watch a movie and it froze. i tried to shut it down but it wouldnt respond, and now is frozen. please help me if you can!
You know its kinda rude to derail XBenzinoFla thread with your own problems, make your own thread next time.
But to the both of you especially XBenzinoFla, try putting your ZVM in rescue mode and run scan disk to see if it hel
ps.

Zen Micro problem need help

Today i was listening to music and my zen micro just froze while playing and no buttons could be pressed and the lock button wasnt on. So i took the battery out and rebooted the player but it froze at the creative screen. I went home and i went to recovery mode and tried to reload the firmware but it said erasing firmware for more than 2 hours. So then i tried a format but it said formating for the same amount of time. I need help please. Also, recently i've had problems witht the headphone jack. When ever i would stick it in it would sound distorted and i would have to move it around until i got it to a certain spot to hear it good again. If anyone else has this problem please tell me. One more thing i had returned my other micro zen in for hard dri've probems and this was my new one do u think if i have to return in (hopefully not) that they would accept it.

If the functions in Rescue Mode aren't working properly then you need to contact Creative Support.

Still stuck with the same old producer consumer weight problem need help

Hello All,
This is the problem I am stuck with right now.
I have two array lists one producer array list and one consumer array list denoted by a and b
P1 P2 P3 P4 P5
5 6 7 8 9
C1 C2 C3 C4 C5
2 3 4 5 6
Now we find all those producer consumer pairs which satisfy the criteria Pi>=Ci
We have the following sets
(5,2)(6,2)(7,2),(8,2),(9,2)
(5,3)(6,3)(7,3),(8,3),(9,3)
(5,4)(6,4)(7,4),(8,4),(9,4)
(5,5)(6,5)(7,5),(8,5),(9,5)
(6,6)(7,6)(8,6),(9,6)
Let us done each of them with Si
so we have S1,S2,S3,S4,S5
we assign a third parameter called weight to each element in Si which has satisfied the condition Pi>=Ci;
so we we will have
(5,2,ai),(6,2,bi),(7,2,ci)....etc for S1
similarly for S2 and so on.
We need to find in each set Si the the pair which has the smallest weight.
if we have (5,2,3) and (6,2,4) then 5,2,3 should be chosen.We should make sure that there is only one pair in every set which is finally chosen on the basis of weight.
Suppose we get a pair (5,2,3) in S1 and (5,2,3) in S2 we should see that (5,2,3) is not used to compare to compare with any other elements in the same set S2,
Finally we should arrive at the best element pair in each set.They should be non repeating in other sets.
Given a problem
P0 P1 P2 P3 P4
9 5 2 2 8
6 5 4 5 3
C0 C1 C2 C3 C4
we have So as (P0,C0) and (P4,C0)
assuming that the one with the smaller index has lesser weight PO is selected.In the program I have used random weights.from set S1 we select the pair PO,CO
S1 =(P0,C1),(P1,C1) and (P4,C1)
since P0 and P4 are already used in previous set we dont use them for checking in S1 so we have (P1,C1) as best.
S2=(P0,C2),(P1,C2) and (P4,C2) so we dont use P0,C2 and P1 and C2 because PO and P1 are already used in S1.
So we choose P4,C2
in S3 and S4 ae have (P0,C3),(P1,C3),(P4,C3) so we dont choose anything
and same in S4 also.
So answer is
(P0,C0),(P1,C1) and (P4,C2).
My program is trying to assign weights and I am trying to print the weights along with the sets.It doesnt work fine.I need help to write this program to do this.
Thanks.
Regards.
NP
What I have tried till now.
I have one more question could you help me with this.
I have an array list of this form.
package mypackage1;
import java.util.*;
public class DD
private int P;
private int C;
private int weight;
public void set_p(int P1)
P=P1;
public void set_c(int C1)
C=C1;
public void set_weight(int W1)
weight=W1;
public int get_p()
return P;
public int get_c()
return C;
public int get_x()
return weight;
public static void main(String args[])
ArrayList a=new ArrayList();
ArrayList min_weights_int=new ArrayList();
ArrayList rows=new ArrayList();
ArrayList temp=new ArrayList();
Hashtable h=new Hashtable();
String v;
int o=0;
DD[] d=new DD[5];
for(int i=0;i<4;i++)
d=new DD();
for(int i=0;i<4;i++)
d[i].set_p(((int)(StrictMath.random()*10 + 1)));
d[i].set_c((int)(StrictMath.random()*10 + 1));
d[i].set_weight(0);
System.out.println("Producers");
for(int i=0;i<4;i++)
System.out.println(d[i].get_p());
System.out.println("Consumers");
for(int i=0;i<4;i++)
System.out.println(d[i].get_c());
System.out.println("Weights");
for(int i=0;i<4;i++)
System.out.println(d[i].get_x());
for(int i=0;i<4;i++ )
int bi =d[i].get_c();
ArrayList row=new ArrayList();
for(int j=0;j<4;j++)
if( d[j].get_p() >=bi)
d[j].set_weight((int)(StrictMath.random()*10 + 1));
row.add("(" + bi + "," + d[j].get_p() + "," +d[j].get_x() + ")");
else
d[j].set_weight(0);
row.add("null");
rows.add(row);
System.out.println(rows);
int f=0;
for(Iterator p=rows.iterator();p.hasNext();)
temp=(ArrayList)p.next();
String S="S" +f;
h.put(S,temp);
String tt=new String();
for(int j=0;j<4;j++)
if(temp.get(j).toString() !="null")
// System.out.println("In if loop");
//System.out.println(temp.get(j).toString());
String l=temp.get(j).toString();
System.out.println(l);
//System.out.println("Comma matches" + l.lastIndexOf(","));
//System.out.println(min_weights);
f++;
for(Enumeration e=h.keys();e.hasMoreElements();)
//System.out.println("I am here");
int ii=0;
int smallest=0;
String key=(String)e.nextElement();
System.out.println("key=" + key);
temp=(ArrayList)h.get(key);
System.out.println("Array List" + temp);
for( int j=0;j<4;j++)
String l=(temp.get(j).toString());
if(l!="null")
System.out.println("l=" +l);
[\code]

In your example you selected the pair with the greatest
distance from the first set, and the pair with the least
distance from the second. I don't see how the distance
function was used.
Also it's not clear to me that there is always a solution,
and, if there is, whether consistently choosing the
furthest or the closest pairs will always work.
The most obvious approach is to systematically try
all possibilities until the answer is reached, or there
are no possibilities left. This means backtracking whenever
a point is reached where you cannot continue. In this case
backtrack one step and try another possibility at this
step. After all possible choices of the previous step,
backtrack one more step and so on.
This seems rather involved, and it probably is.
Interestingly, if you know Prolog, it is ridiculously
easy because Prolog does all the backtracking for you.
In Java, you can implement the algorithm in much the same
way as Prolog implementations do it--keep a list of all the
choice points and work through them until success or there
are none left.
If you do know Prolog, you could generate lots of random
problems and see if there is always a solution.

Ipod problem NEED HELP ASAP

Hello guys,my ipod touch has battery problems and internal speaker are not working and will apple replace me a new one,i even have 1 year warranty and i want a new ipod touch white instead of black<<<plz plz plz reply ASAP plz really need HELP!THANK YOU

If you iPod is defective, in warranty and not abused Apple will replace it with a refurbished one. They may or may not replace it with the white one. You will have to ask.
Other users have asked the same question but I hav never heard them come back with whether or not they go the color changed.

MSI ge70 0nd-250ne boot problem

Hey, im having a really bad problem with my notebook. I just bought it about 3 months ago and now it wouldn't start, when i try to start it i end up in the bios management and i can't get any further then that. This just suddenly happend, it was running on the battery with something running in the background and after a while in went into sleep mode because of my settings.
When i then pressed the power button it ended up in the bios management. Need help fast!

Not working at all, it just goes back to the setup utility.
I tried legacy boot, and it says "Check cable connection, pxe-m0f exiting intel pxe rom. Reboot and select proper boot device or insert boot media in selected boot device and press a key."

MSI GE60 0ND - 298 - SCM problem

Hey guys,
I need an advice regarding the SCM manager for MSI GE60 0ND with 64bit Windows 8. After reinstaling my computer I installed all drivers from CD I received with PC but my pop-up icons doesn´t showing anymore. So I want to download SCM again but I can´t find a correct link. Please can you someone post here link to download this driver or give some advice how to solve this issue?
Thank you a lot.
(Sorry for my bad english :-) )

Yep, here is the link:
http://www.msi.com/product/nb/GE60-0ND.html#/?div=Utility&os=Win8%2064

MSI GT60 0ND 675M Throttling Problem (NEED HELP)

Similar Messages

Maybe you are looking for