MSI GT60 display switches off itself

I have a msi GT60 dominator 870m .... when i am playing games i am always connected to my monitor and tv... sometimes after playing a little while suddenly both external monitors lose display and everything hangs ...... after 3 or 4 minutes it correctz itself .... i think my laptop is throttling or something .... i had my turbo boost on as well .... i noted the temp of GPU which was 90c ..... what can i do to prevent this ? This is so annoying when playing games like LOL, dota
looks like MSI does not play test or something .... what is the use of having GAMING laptop when it cant play GAMES ....
anyways do i need to repaste or something .... i don't want to lose my warranty
Hdmi port connects to my 24 inch monitor and mdp1 connects to my tv... my laptop display is off... tv and monitor are on duplicate mode ...
so when this issue happens laptop display switches on, tv and monitor loses display and everything is in a hanged state ... 3 minutes later ... both my tv and monitor switches back on and everything works again ..so this makes me think its switching from nvidia gpu to integrated gpu for some reason....
My vbios is latest as well 80.04.F7.00.06
nvidia version : 340.52
Intel : 10.18.10.3652.
Is there any fan control software or something

Quote
Hello,
First of all, in order to tell you if repasting will void your warranty, I have to know the country you live in.
I live in USA.
Quote
Temps are high, so that's the most likely the issue. LoL and Dota are not demanding games; can you please run Intel Burn Test (single pass) while recording temps (with HWInfo). If it passes, then run some GPU benchmark like Kombustor and monitor HWInfo temps too.
Did Intel burn test with standard and maximum both were successful, Max temps were 93c
Also ran Kombuster for 25 minutes, max temp was 94 c again no issues.
Quote
MSI can't test every single laptop that comes out of the production line, can they? At least brands that make condoms don't test every single that is made
Come on condoms come with an inherent risk and a warning that it has a chance to fail , also you are comparing a 1$ item with 1500$ product?
Quote
No fan control available for notebooks, sadly.
There is a custom software for old generation laptops, some fan control utility, which changes the fan speed profiles, not sure if we have one for the new generations.. motherboard is same as old so it may work for my laptop as well but i am not sure ... was hoping if i could increase the fan speed i could get the temps down.

Similar Messages

PLZ help me!!!! N91 switching off itself after few...

my nokia N91 4 gb got disconnected during software update which cause a severe damage.i take it to a software repairer who flash it but then he replied me that the IMEI is corrupted.then i took it to some one else who installed the software eventually by flashing 2.20 008,the latest version in my N91(Rm 43) but it is switching off itself after few hours.it sometime take 1 hour, some time half hour and some time 5 hours then switch off itself.it turns on again when i turn it on and works for same period and then again switch off.could u plz help me as i am in great trouble now.what to do now to repair it.when i went to the software repairer who repaired it.he replied that its the hardware fault.i was astonished to hear this as there was no problem before repairing the software.plzzzzzzzzzzzzzzzzzzzz help.

hello,
i am having the exact same problem. however i do nott know how it occured. the phone continues to shutdown by itself every few hours. i don't know what too do
pls help
thanks
peter

When display switches off I can't get it back without forced restart

When display switches off due to low battery power & I can't get it back even when I plug in to the mains and have to force the PC to restart.
Is there a pref somewhere to disable this?

Hello
When the display goes off exactly? How much capacity has battery at this time? 5%? More?
Try to set this to higher level.
When you work with your notebook and battery level comes to low battery level and the alarm alert will be shown in task bar but you will be able to continue your work several minutes or to connect AC power supply.
I am afraid your notebook reaches critical battery level and then is maybe too late for any action.
Set Low battery level to 10% and when the notification is shown connect AC adapter immediately.
I presume the display must not be off at all.

Nokia 6300 switch off itself

i have a nokia 6300 that usualy appears "check info service" then switch off itself. why "check info service" is appears? are some software missing? your feedback is my best solution.
Regards,
Matias

try turning off cell broadcast in message settings and topic detection
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

N95 - display switches off

Hi, I have a problem with N95 display - when the lcd light is on, it works.... but as soon as the light goes off, the display switches off... so there is no screensaver with time and sms/missed calls icons... Even during a call, after a few seconds (exactly as I have set in settings to switch off light) the display switches off... Do you have any idea where could be the problem, please? The LCD was changed, so does there exist a possibility, it is a faulty LCD?

If the display is working ok when active, then there is unlikely to be anything wrong with it, check the settings in personalisation. Menu>tools>settings>general>personalisation>themes>power saver, and tick Date and time !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Satellite A200 switches off itself constantly

hello,
I have a problem with my laptop as it switches off itself constantly, after using internet for about 30 minutes, or straight away after you launch any major program like photoshop or autocad or game.
I spotted that it also turns very hot fast in a couple a minutes could it be related? what might be the problem?

Hi mate.
Quest what? I think I know what could cause this issue.
I think its related to high temperature. The CPU and GPU create a lot of warmness while running high performance software (graphic app, games, etc).
Possibly the cooling modules cannot cool the CPU because of dust.
Remove the dust from cooling fans and grilles using a compressed air spray.
This tool is very useful and can be purchased from different online dealers.
Ciao

HT201412 it shows itunes logo and usb cable with arrow after that it switch off itself

iPAD shows itunes logo and usb cable with arrow after that it switch off itself

If the Restore doesn't work, force your iPad into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad

BlackBerry Z10 switches off itself!

I have been using this phone for 2 months...and it switches off when the battery percentage is 40-50%....need help!

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs. If it fails, please re-try, but increase the wait time in step 4 to at least 2 hours, and perhaps as long as 4-5 hours.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I just bought an iphone 4s in surat india.the phone switches off itself atleast 2 times in a day.at times the problem is that when it goes to sleep a person trying that number gets a dialer ring.Hence he seems that i have not picked up his call

i just bought an iphone 4s a month back
the phone gets switched off on its own atleast 2 times in a day and when we press the home button it gets started.
when it is in the switched off mode, a person calling on it gets my dialer tone. He feels that i have not answered his call and has gone as a
missed call on my phone. But in actual, i have never received the call nor its presence is there as a missed call on the "switched off" iphone 4s.
Hence the caller feels that i am not answering his call nor even calling after i see his missed call
this is a very grave problem i am facing
please help me out.
chetan sanghvi

i just bought an iphone 4s a month back
the phone gets switched off on its own atleast 2 times in a day and when we press the home button it gets started.
when it is in the switched off mode, a person calling on it gets my dialer tone. He feels that i have not answered his call and has gone as a
missed call on my phone. But in actual, i have never received the call nor its presence is there as a missed call on the "switched off" iphone 4s.
Hence the caller feels that i am not answering his call nor even calling after i see his missed call
this is a very grave problem i am facing
please help me out.
chetan sanghvi

Toshiba 40TL968 switching off itself

Hi,
I bought Toshiba 40TL968 TV just 3 weeks back but it started showing a problem. It would automatically turn itself off after every 30-40 minutes. There was no timer. I reset it and then it worked fine for a few days before showing the problem again.
I contacted the retailer and he exchanged it (since it was just 2 weeks old). This new TV was working fine until today. It showed the same problem and it turned itself off after some time. I also noticed that TV got hanged while watching Dailymotion app and after that whenever I turned it off, instead of red LED, orange one was shown. I unplugged it but still it was showing orange LED instead of red. And then this problem of auto-turning off started. I am not sure if they are related.
It is not even 4 weeks and two TVs have shown the same problem. I am tending to believe either there is some fault with the whole series or with the stock that retailer is carrying. I am thinking about returning the TV and get my money back.
Has anybody else faced the same problem with this model? Or has any idea why is it happening again and again?
The firmware of my TV is - 7.0.27.8.1 Nov 12 2012 - 68.7.75.4
Thanks
D

I have the same problem with the 40TL968, I also had it with the 2 previous 40RL series TV's I had as a direct replacement from Toshiba. In addition to this the subtitles fail to work, it drops its network connection, repeatedly locks up whilst using the guide or the smart TV services.
I reported the faults with my current set back in March 2013 and the problems were investigated and confirmed on TV's held by Toshiba's technical department.
I was then told a firmware would be available in a couple weeks.
Months later I was told that the firmware has issues and therefore there was no fix for my television.
I am now awaiting a suitable resolution from Toshiba.
The televisions were issued direct from Toshiba as (extended) warranty replacements after their authorised repair centre, systematically destroyed my previously perfect TV that was sent off to have a standby switch replaced and came back with a heavily scratched facia, faulty HDMI ports, misaligned casing and finally a dead tuner.

My 9220 restarts and switch off itself and service center can't fix it.

I'm in need of help. My BB frequently turns off by itself, even if there are no applications running. I tried to restart it by pressing the power button, but that never worked. I had to hard restart it by taking off the battery and then putting it back on again. I need to do this around 2 or 3 times (only once if i'm lucky) to get it to turn back on. The frustrating part is when it shuts itself down again only a couple minutes after I had managed to turn it on again.
I took it to service center and there they collected it but since last 1.5 Months i am trying to get my phone but they say that we didn't fixed it.
Please help me.

Without the device in your hands, it's rather useless to have advice since you cannot carry it out. But, since you desire it, here are some things you can try. I do not know which, if any, will work for your situation.
I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
On the chance that your battery may be causal, please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can not use the maps Otherwise iPad will switch off itself

As the question described in the topic, I now want to reinstall this app or delete it from the first page, but I can not a way to do that. Could anybody please tell me how to do it-delete the apps from the first page. When I long tap the apps icon in the first page there is no delete signs appear on the left upper corner but they do from the second page.

My problem is not about reset. I can not use maps app, everytime when I tap the maps, the machine will switch itself off, which means the white apple appears on the screen. Also, I can not search any location by google map. My hypothesis is to delete the maps app then install it again. However, I can not find a way to delete it, as you mentioned it was firmware I could not delete it at all. But I still wonder if anyone here can give constructive suggestions to fix the maps issue.

Screen Sharing with connected display switched off

I have a 2009 Mac Mini connected to my TV using a minidvi > hdmi adaptor.
If the TV is turned off and I try to access the computer using Screen Sharing, I only ever get a blank screen.
If the TV is actually turned on then screen sharing works fine.
If i disconnect the DVI adapter then screen sharing works fine.
I would like to use Screen Sharing without having to turn on the TV or disconnect the minidvi>hdmi adaptor.
Is this possible?
Cheers Russell

It's kind of complicated, but the explanation would be something like this: a Mac relies on something called a Plug and Display driver in order to properly configure its graphic's output and send it to an attached display. The P&D driver is also referred to as EDID and you can read more about it on Wikipedia if you care to.
http://en.wikipedia.org/wiki/EDID
The VESA organization that controls the standard for EDID and DDC specifies that a host system, meaning the Mac in this case, be able to power the DDC channel and the display's EDID function even when power is turned off on the display. But not all manufacturers adhere to that part of the standard, especially true for some TVs. So when your TV is turned off, the DDC channel ceases to function and the Mac looses track of the TV and unfortunately sends no output in that case.
The little box I referenced in my earlier post will keep the DDC channel alive at all times so the Mac will always send video out regardless of the power state of the TV.

MSI GT60 Display question.

Hello. I recently bought my msi laptop, and I noticed that the display screen is a lot more (choppy? laggy? ) than my 5 years old Asus lcd monitor that I use on my PC. I don't know how exactly to explain it. Its like my display is running on 30 fps wh...

Quote from: axon_271 on Today at 21:07:03Sound Blaster cinema 1.00.02 working well in windows 10
Thanks a lot for providing this solu...

MSi GT780 TurboON "P1" problem - switching of itself.

Hi,
I bought a MSi GT780 in last week. Unfortunately i have got a little problem. When i click on "P1" on touch panel the "TurboON" is switching on but after a
30sec its switching off by itself. Why is it happing like that? On this video we can see that guy is switching on
this "TurbonON" and it is not switching off byt itself. You can see that in 1:50minutes to 1:55minutes. Tell me why i have got this problem? Oh last thing ofc i have installed a Sbar.
Oh i would forgot. When i am clicking on "P1" on touch panel this button is not highlighted as the rest buttons like wifi when it is on. I guess it should be highlighted am i right?
Please response as fast as it is possible.
Best regards Dominik.

I know the solution of this problem. Before you clikc "P1" first you have to run the "NVIDIA Overclock Tool" then you can run the "P1" so "TurboModeON" and it will not switching off itself.
Unfortunetly this "TurboModeON" is sh**. It overclocked the gpu 50hz more nothinkg more ... tell me what is it 50mhz ?

MSI GT60 display switches off itself

Similar Messages

Maybe you are looking for