Msi gt680 corel windvd doesn't play certain bluray

hi all
  just purchased my 1st gaming laptop gt680, games wise it's awesome......but for some reason corel windvd doesn't play certain bluray's, could someone point me in the right direction,
   tried 'updating' windvd with no success (get a msg saying 'product up to date')
Corel windvd version 10.0.5.733
Gt680 model 057au
Bluray player hitachi hts7250050a9a364
Bluray's that ARE playable are
District 9
The chronicles of riddick
Swordfish
Clash of the titans
The Italian job
GI Joe the rise of cobra
Transformers
Transformers revenge of the fallen
Hitchikers guide to the galaxy
The island
Kick ass
so i guess shouldn't complain too much BUT would be happier knowing whatever bluray i purchase it'll be able to play, also went to corel website downloaded various 'patches' and still nothing.
Problem with prince of Persia, loads up no probs, get to the language screen, I click on english then nothing black screen
Avatar nothing
Please note that they are full purchased bluray disks that have purchased from stores

Quote from: Mark on 23-April-11, 18:24:35
Try playing them with a different media player, as it could be Corel WinDVD causing the issue.
Hmm I would..... But have no idea which to choose, I use Corel WinDVD because that's what came with the laptop.
Maybe a suggestion of a worthy player?

Similar Messages

  • After loading the new OS now my songs do not play correctly. Titles are wrong on songs and it just doesn't play certain songs in random play or even if you select them individually. What's up? Kind of frustrating!!!

    After loading the new OS my songs do not play correctly, is anyone else having this issue? Titles are wrong on songs and it just doesn’t play certain songs in random play or even if you select them individually. What’s up? Kind of frustrating!!!

    I had the same issue.  In fact I posted it yesterday, but didn't get any replies.  I physically synched my phone to PC iTunes.  on the PC, under the phone/music tab, I unchecked the synch music box and then the apply button to remove all of the music from my phone.  Then once that synch finished, I went back and selected all music, and synch music and apply to put it back on to the phone.  So far, I haven't had an issue again, but I also haven't listened very long.  Hope this helps!

  • Itunes doesn't play certain songs and just stops working

    it was fine a couple of weeks ago but now it just doesn't play some songs and whenever I doule click those songs it went straight to "Itunes has stopped working." and I have to close the program. Today I just bought a song from Itunes store and it doesn't play either and Itunes stops working as well!!
    Please help. this is so annoying.

    @ King-Penguin -- no, they don't and that seems to be the problem, thanks!
    Why are the ticks important, and do you know how I can tick my entire collection?
    Richard

  • I have an ipod nano 4th gen.  It shows up on my desktop, but it isn't recognized in itunes.  It also doesn't play certain songs.

    The pop up screen says that I need to reformat it.  I've have tried all of the troubleshooting tip on here.  I have a  white macbook.

    Did you try reformatting it then?  If so, what happens when you tried?  What happens if you try connecting the iPod to your PC in Disk Mode?
    Putting iPod into Disk Mode
    B-rock

  • Doesn't play in WinDVD

    Well, I got Encore DVD 2 in the Adobe Production Studio Suite; and I've gotta say I'm loving the whole package!
    Now my problem is, I have burned 25 copies of a project and they play fine in all software DVD players except WinDVD.
    In WinDVD, there is no video and the audio plays at about 2x speed with lots of cutouts. This does not occur in PowerDVD.
    Does anybody know what the problem is? So far, when people have experienced this issue, I just downloaded VLC for them as that plays the disc fine. Still, its rather frustrating that it doesn't play on anybody's computer who's using WinDVD.
    Has somebody come across this before, is there a fix?
    Any help would be greatly appreciated! :)

    Several messages turn up when searching for windvd... one of them may help... search link at
    http://www.adobeforums.com/cgi-bin/webx?126@@.1de98ec0

  • IPod Touch 2nd Gen (iOS 4.2.1) stops playing certain songs but screen remains.

    iPod Touch 2nd Gen 32GB
    iOS 4.2.1
    roughly 4.89 GB free
    During playback, the Touch stops playing on certain specific songs, but the screen remains as is (that is, doesn't go back to menu or black).  I suspect "bad blocks/sectors" on the memory chip, but have no way of checking.  Pressing pause and then play again doesn't help.  Skipping back to previous song and then forward doesn't help.  Skipping forward does not work (next song doesn't play).  This affects only certain very specific and recently added songs.
    I've tried Reseting (erasing all content) and Restoring from backup.  Problem still occurs.
    Next step is to Reset (erase all content) and setup as a new ipod.  Then reload music content.  All content is AAC at 192kbps or lower.
    Anyone have any thoughts?

    If the songs play OK in iTunes on the comnputer:
    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • I can't play certain videos from the internet on my macbook

    I can't play certain videos from the internet on my macbook.
    When using Sarfari or Google Chome, I am unable to play some videos on the internet. News clips, posted videos on blogs, and tv episodes from their own network websites. Youtube videos are fine. I doesn't make sense.
    I tried downloading an update for quicktime, but the computer claims that quicktime is up to date. Yet, the videos and tv episodes don't play.
    I have checked for the most recent software updates, and everything is up to date. Nothing is wrong with the hardware either.
    Any suggestions would be awesome! Thank you!

    In addition to Flash, you might need some other plugins.  Microsoft videos are mostly in Silverlight, and you'll want Flip4Mac to play WMVs.  Perian contains codecs for pretty much every video online.
    http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
    http://windows.microsoft.com/en-US/windows/products/windows-media-player/wmcompo nents
    http://perian.org/

  • IDVD problem burning and multiplexing - gets stuck but ejects the DVD and the DVD doesn't play

    I am having trouble burning DVDs.  Everything seems to be working fine during the iDVD project creation.  I can watch the movie and select scenes within iDVD.  Then, when I go to burn the DVD, it gets stuck at the burning/multiplexing stage - the wheel just keeps spinning and says there is about a minute left.  Yet it ejects the DVD and the DVD won't play when inserted into a DVD player.  It will show the intro and the scene selection pages but when you click on one of the scenes, it gets stuck and doesn't play.  I have already uninstalled and reinstalled iDVD.  The problem persists.  It seems like the burner itself is the problem.  What can I do to fix it?  I have Mac OS X Version 10.6.8 with a 2.8 GHzintel Core 2 Duo and iDVD version 7.0.4.

    Hi
    Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
    So first - turn on TV-Safe area and move any object well inside of this.
    Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
    Now my long long list on Multiplex Error
    LONG LONG LONG LIST
    Multiplexing Error
    PART One.
    Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
    I only use.
    Video - StreamingDV (miniDV tape via FireWire) and
    Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
    Photo - .jpg (.bmp known problematic)
    Chapters !
    A.    Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
    as described by Donnyboy69.  Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
    B.    Location of Chapters
    • Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
    • Not in a transition (or within 2-3 seconds from it)
    Important when from iMovie HD6 or previous - Now also observed when using FCE 4
    PART Two.
    from Robert Modero.
    "Multiplexing Error. Problem during initialization of tracks"
    Simply remember to add subtitles to your Quicktime files and menu buttons.
    Once I did that, I was back in business.
    from Boise Jim
    Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    I always makes a DiskImage first and test this so that it runs OK
    I use only - Verbatim DVDs
    I use only - DVD-R
    I burn at an as slow speed possibly e.g. x1
    This gives good DVDs
    PART Three.
    Multiplex Error
    Chuck, Chicago 2/7/2009.
    Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
    2. Disconnect any other external devices not absolutely needed.
    e.g. external USB/USB2 hard disks, other FW hard disks etc.
    3 Chapter marks in transitions - minimum 2 sec from
    FROM Bev.
    (Not a 'guy' but I will answer!)
    First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
    Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
    Also, choose a slower burn speed, 4x or less.
    Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
    From. Boise, Idaho
    I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    It worked, and I got a clean burn from iDVD.
    Hopefully this can help other people.
    by dheb0422
    Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
    One user more writes
    To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
    Video from both passed from FCE 4.01 with chapters
    One project worked fine in creating disk image file
    The other gave Multiplex Errors
    I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
    Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
    Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
    This time multiplex errors gone
    So had something to do with chapters
    So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
    After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
    That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
    When I removed "bad" chapter mark (and others in), no multiplex error
    As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
    I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
    Rich839
    In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
    Russ One - suggest this
    Multiplex Error-There was an error during muxing preparation
    One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
    Summary - What to try
    1. Chapters
    • Only A to Z and 0 to 9 in chapter title
    • No Chapter mark at very beginning of movie
    • No Chapter mark in or within 2 seconds from any transition in movie
    2. TV-safe area for buttons (no one outside this)
    3. Safe re-boot
    4. No other external devices connected - that are not needed
    SDMacuser adds to this
    • On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
    Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
    5. Minimum of 25Gb free space on Start-up hard disk
    6. Make a DiskImage first - reduces where problem originates
    7. Trash iDVD pref. file
    8. Make a new iDVD project
    9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
    10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
    Yours Bengt W

  • Satellite 2800-500 DVD doesn't play video DVD-ROM SD-R2002

    My DVD doesn't play videos . CD rom works fine. but when I put DVD it makes a sound as if it would play , the drive's light would stay on but the DVD would not play. I live in Europe and the regional settings is at 2 which is ok.The DVDs play on another PC. I am running Windows ME. Any suggestions please? Is there anywhere to download the driver for Toshiba DVD-ROM SD-R2002.
    thanks all.
    Tammy

    Hi tammy,
    did you installed a DVD Softwareplayer like WinDVD or something else?
    If yes, which is it? Does it play DVDs in the past without problems?
    Do you want to play original DVDs or backup copies?
    BYE Campino

  • Where to download Corel WinDVD to reinstall

    I'm getting ready to upgrade my Thinkpad E430 from Windows 7 to Windows 8 to take advantage of the current upgrade offer.  However I can't find a link to download the installer for Corel WinDVD 10 which is pre-installed on the system.  On the Application Software Limitations file, it lists WinDVD as one of the programs recommended to be uninstalled before upgrading.  Searching the drivers and software page didn't turn it up, though.  Does anyone know where I can get it?
    Solved!
    Go to Solution.

    After finishing the upgrade to Windows 8, my results are:
    RECOMMENDED SOLUTION: Lenovo PowerDVD 10 works the best.  No issues no far.
    As for other programs...
    Windows Media Center also works.  Unfortunately, there's a blank menu entry for Corel Win DVD (even thought I uninstalled that before installing Media Center), but if you ignore that and go through Movies > Play DVD then it works.
    VLC player also works (of course).
    WinDVD won't play DVDs after the upgrade, saying that it wasn't compatible with the current video driver.  After I uninstalled it, I can't re-install because I just get the error that it isn't compatible with this OS.  I searched for an update on the Lenovo supoort site, but that only yielded old updates for difference systems.  There is nothing on Corel's site either for WinDVD 10 / 2010.
    Does anyone know where to get the Windows 8 update for Corel WinDVD 2010?
    If for no other reason than to get rid of the dead Media Center menu.
    One other thing to note: when I double-clicked the DVD drive icon in the File Explorer, it still tried (and failed with an error) to open the DVD with WMP.  This was apparently caused by a left-over registry entry from Windows 7, which I modified based on the following link, and now double-clicking opens in PowerDVD.
    http://www.dslreports.com/forum/r21926644-Default-DVD-player~start=20
    Hope that helps.

  • My ipod crashed or skips when playing certain songs

    Whenever I use itunes I can play all of my songs, however when I use my ipod nano 5th generation I am unable to play certain songs. When I try to play these songs my ipod either skips over the song or crashes. Both my ipod and itunes are up to date. I have tried doing a restore. I have tried taking off all the songs and reloading them (this just causes a different set of songs to become unplayable). I have also checked all my music files for corruption with software from CNET(they are all fine).
    The most common response I've seen to problems similar to mine is this...
    http://support.apple.com/kb/TA26488
    Nothing on that page works.
    Please help, Thanks.

    It's hard to say what cause of error is in particular, without a bit of troubleshooting.  Where were these problem tracks downloaded from? 
    Have you tried all of the troubleshooting here?
    Troubleshooting songs that skip on iP
    Again, I"m not really all of this troubleshooting is worth it since as you stated the problem is only apparent on the older iPod Video, which would point to an issue with that device.  You could try and do a disk diagnostic on it to see if there is anything in particular that stands out there.  See this post from another forum member turingtest2 describing how to perform this test and what the numbers mean.
    https://discussions.apple.com/thread/3784647?start=0&tstart=0
    Apple doesn't have a trade in policy, but they do have a recyling program where you can bring your old iPod into be recycled for a 10% discoun towards the purchase of a new one.
    B-rock

  • IOS5 Music doesn't play the right songs!

    Newly upgraded, and when I use what used to be called iPod (now Music) the list of songs shows, but tapping certain songs doesn't play them, it plays either nothing at all, or the wrong song. Very chaotic!

    The database files on the iPad have probably become corrupted. You will have to remove the songs from the iPad and re-sync them from iTunes to re-write a fresh database file. It can easily be done by unchecking "Sync Music" in the iPad's sync settings in iTunes, sync then re-check it.

  • I am unable to play certain songs since itunes wants me to authorize the computer with an old email address I had when I first bought the song. a

    I am unable to play certain songs since itunes wants me to authorize the computer with an old email address I had when I first bought the songs. I don't remember that password and when I use my present Apple id and password it doesn't authorize the computer to play those songs. How do I get these songs authorized since there are a lot of them?

    Purchases are always tied to the account from which they were purchased.
    iTunes Store: Retrieving and changing passwords (Apple ID)

  • Satellite M70 - WinDVD doesn't work anymore

    WinDVD doesn't work anymore. Although my CD/DVD-RAM is functionable and the Windows Explorer shows all files in the CD drive, WinDVD cannot find them.
    If I try to watch a video with Real Player, I can at least hear something, but there are no pictures. Is there something wrong with my video card ?
    How can I fix that ?

    In my opinion you should test video play with VLC Player. It is free and you can download it under http://vlc-media-player.en.softonic.com/
    This player opens every video format and you must not install some additional codecs. I use it for the long time and I am happy with it.
    Please test it and post the result.

  • TS1389 My iTunes isn't letting me play certain songs.

    My iTunes isn't letting me play certain songs, saying that the computer is not authorized to do so.  I've done everything Apple recommends. I've gotten rid of the SC folder twice.  I deauthorized then reauthorized it, etc. I am the administrator so signing in as administrator doesn't help.  I don't know what to do. Help please.

    Doublechecking. In the course of your troubleshooting to date, have you also worked through the instructions from the following document?
    iTunes: Missing folder or incorrect permissions may prevent authorization

Maybe you are looking for