MSI GT70-0NC BIOS UNLOCK Request for Fan Control

Hello Svet,
I bought my GT70 0NC (Model MS-1762) in the first days of June 2012. Last year my Geforce 675 GTX died and since then it runs with onboard graphics. Since the GT70 runs without a GFX and its fan/cooler, the CPU fan is working full throttle which means it is very loud. I don't plan to buy a new MXM card since they are too expensive and I'd like to save my money for a future computer.
My point: I need unlocked controls of my BIOS to get my annoying main fan down to its actual (useful) rotation speed. As far as I read in these forums it is possible via setting it to onboard as main graphic card or something like that.
Please can you mod me a (maybe newer or newest) BIOS version for this problem? If possible I'd be glad if you leave some instructions what to avoid etc. with it.
BIOS Version: E1762IMS.108 (build date 03/29/2012)
EC Version: 1762EMS1 Ver4.05 (build date 04/03/2012)
The Notebook came with pre-installed Windows 7, but today I use Windows 8.1 on a later bought SSD (the HDD with the recovery sections was built out last year).
I hope, these changings are not a problem.
After you give your go, I will send you a Donation Confirmation Code. (In case please give me further information how much etc.)
Thanks and best regards.

yes can be done, with clarify that BIOS can't provide a FAN control [bios can't control the FAN at all]
but yes it can help your FAN to calm down to its normal operation like was originally when your nvidia card was working

Similar Messages

  • MSI GT70 0ND BIOS unlock request for intel vt-x virtualization

    Hi, I'd like to request an unlocked bios for an MSI GT70 0ND.
    I'm trying to enable intel VT-X virtualization, so I tried the official bioses as indicated here: https://forum-en.msi.com/index.php?topic=158790.0
    However neither of the windows 7 64bit bioses seemed to change anything, although the 30U version reactivated the raid settings which I had set to ahci.
    I should also mention that the guide for flashing the bios on the official page indicated that after flashing the bios and waiting 15 seconds with no power and battery out, that there would be a screen saying 'CMOS Checksum Bad' but this didn't happen. It simply turned off again really quick, and restarted with seemingly the exact same bios. However I know it did something because with the 30U version the raid options were re-enabled.
    Looking furthur I found this thread: https://forum-en.msi.com/index.php?topic=160434.0
    Indicating that I should request an unlocked bios.
    I've already sent svet a donation. The confirmation is : 83957137919249941
    Svet, Can you please make for me a custom bios with as many things enabled as possible including Intel VT-X?

    Hello, what is your current BIOS version?
    However neither of the windows 7 64bit bioses seemed to change anything, although the 30U version reactivated the raid settings which I had set to ahci.
    Quote
    I should also mention that the guide for flashing the bios on the official page indicated that after flashing the bios and waiting 15 seconds with no power and battery out, that there would be a screen saying 'CMOS Checksum Bad' but this didn't happen. It simply turned off again really quick, and restarted with seemingly the exact same bios. However I know it did something because with the 30U version the raid options were re-enabled.
    Looking furthur I found this thread: https://forum-en.msi.com/index.php?topic=160434.0
    Indicating that I should request an unlocked bios.
    As already mention in the topic that you pointed, VT-x is already Enabled in latest version.
    Quote
    I've already sent svet a donation. The confirmation is : 83957137919249941
    Svet, Can you please make for me a custom bios with as many things enabled as possible including Intel VT-X?
    Yes, but tell your current BIOS version 1st to know which one will suits for your notebook

  • BIOS Unlock Request for MSI GT70-2OC

    Hi,
    I would like to to request a UEFI BIOS unlock for my laptop, the current version installed is E1763IMS.70J but the laptop came preinstalled with E1763IMS.70C.
    The main aim of the unlock is so that I can load custom kernels (to install linux) but I would also appreciate it if you could fully unlock the BIOS.
    I have made a donation and the confirmation number is: 1LU475121Y029870K
    Let me know if you need more info.
    Thanks

    Quote from: alonso_91 on 26-February-14, 23:58:37
    Thank you.
    Do you need me to upload the bios file? because I believe that the msi website has the 70R archive which made my laptop useless.
    you mean you don't want latest version [70S or 70R],
    but 70J exactly?
    Quote from: alonso_91 on 26-February-14, 23:58:37
    the msi website has the 70R archive which made my laptop useless.
    how exactly? what hapends after flashing to 70R official?

  • MSI GT70 0NC BIOS FAN SETTINGS

    I remove the Nvidia GPU ( 670M ) because of video card burned and doesn't work.
    After removing the video card , fans working at max speed always.
    I don't know what i must to do.
    Here is the some details FOR my MSI laptop ;
    WINDOWS 8.1 PRO
    CORE I7-3610QM 2.3GHZ
    16GB RAM
    128SSD +750GBHDD
    FULL MODEL NO : GT70 0NC-234TRK120500043
    BIOS SCREENSHOT ;
    THANKS IN ADVANCE

    Quote from: cag_utd on 10-January-15, 03:41:57
    Yes I understand that  .
    I tried to explain  , I'm not good at dealing with BIOS issues . I tried once ( 12-14 months ago ).
    So can you help a rookie guy ( thats me  ) to fix that problem 
    Yes, but you need to say if you want me to prepare such modded and unlocked BIOS for you
    Note that this will be not official and donation is required: https://forum-en.msi.com/index.php?topic=134259.0
    Once received i can start working over it and send back to you when its done 2-3 hours later
    And can guide you what and how to do to this issue once you running the modded bios

  • GT70 0ND Bios Unlock Request

    Greetings,
    I am requesting a BIOS unlock for my system
    My BIOS VS is E1762IMS.30U
    IGFX vBIOS Version 2126
    ME FW Version 8.0.0.1351
    I am trying to upgrade my video card to a 770m, but after installing the card, it has disabled my Intel 4000, and in device manager, even on a clean install, it says "This device cannot find enough free resources that it can use. (Code 12)" and I am hoping to be able to remedy this with the BIOS

    Yes its possible to be unlocked.
    I can start work on it once donation is received: https://forum-en.msi.com/index.php?topic=134259.0
    and to send it back to you when its done [may take up to 24 hours]
    all other details will be via PM

  • MSI GT60-2OD BIOS UNLOCK REQUEST

    Hi Svet, 
    Could I get the Haswell GT60 bios unlocked?  I am using 4900MQ and want to be able to OC using the extra multis from the bios.  It seems to not like the software OCs with the lastest XTU version.  I think the bios has this locked down.  Thanks!
    BIOS Version: E16F4IMS.503
    BIOS Build Date:  4/24/2013
    EC Vesion: 16F4EMS1 Version 5.00
    EC Build Date: 4/12/2013
    ME FW: 9.0.1.1333
    I also have made a donation! 
    -Talon

    Quote
    I also have made a donation! 
    received it
    Quote
    Could I get the Haswell GT60 bios unlocked?
    Yep, check PM for an query

  • MSI GT70 0NC-494US unlocked BIOS request

    Hi. I want unlocked BIOS with lots of stuff  Actually I need a possibility to set higher vcard clocks and to do software voltmod, change powerlimit (if possible). But if there is no difference at labor for you i'd prefer all the things!=)
    Config&Versions:
    vcard 670MX 3GB
    i7-3630qm
    BIOS ver E1762IMS.50X
    EC ver 1762EMS1.505
    vBIOS ver 80.04.58.00.1F(P2051-b003)
    win8 UEFI
    MB MS-1762 rev 1.0
    Confirmation number: 9L437055PY574534A
    P.S. Привет из России)

    hello,
    received it, check PM for query

  • Bios unlock request for MSI CX70 0ND

    Hello Svet
    Id like to have my vt-x unlocked in my bios since i cannot run 64bit Vmware machines and i kind of need to for college. Is there something i should do beforehand?

    Yes, indeed its not.
    I can start work over it, once donation is received: https://forum-en.msi.com/index.php?topic=134259.0
    and will send back to you when its done.

  • Msi gx70 3be bios unlock request

    hi, i have a msi gx70 3be, would anyone b so kind as to provide me with a unlocked bios please.
    it is the windows 8 version. this is my bios version, E176KAMS.50G thanks

    yes its possible

  • MSi GT70 0NC Graphics problem & looking for recovery image

    Hello.
    I recently reinstalied windows on my laptop and my "Desktop performance for Windws Aero" in windows experience score has dropped from 7.3 to 5.3 And no matter what drivers i use i can not get it back up!
    Spent whole day today trying to figure this out. I installed windows 7 ultimate, fully updated, with drivers from MSi website and newwest drivers from NVIDIA and Intel websites. And still it shows Windows Aero at 5.3 while gaming graphics is at 7.3 It dives me NuTs!
    Please help!
    I also lost my original recovery option so if anyone has recovery CDs out there, can you please make an image and upload it somewhere? Or make a torrent?
    I can't find it anywhere!

    https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Graphics&ProductLine=Laptop+graphics+drivers&ProductProduct=3rd+Generation+Intel%C2%AE+Core%E2%84%A2+Processors+with+Intel%C2%AE+HD+Graphics+4000%2f2500&ProdId=3498&LineId=1101&FamilyId=39
    15.31.3.64.3071    win 8 version 64bit

  • MSI GT70 0NC Unlocked Bios Request - For me too please

    Hello,
    Can I please get an unlocked bios for my MSI GT70 0NC too? I would love the unlock to apply to the latest bios so I can update and unlock at the same time.
    Can you please unlock everything?
    PM me for the cost please so I can deposit.
    Thank you.
    Details
    Model - MS-1762
    Current Bios
    Version E1762IMS.10M
    Build date  17/06/2012
    EC Version 1762EMS1V4.05
    Build date 04/03/12
    ME FW - 8.0.0.1351
    IGFX VBios - 2126

    Hello,
    I just noticed it is possible to disable the discrete card. That would be very important for me as I use Linux and don't game much so it would save power etc.
    When the bios update happens does it also update the IGFX firmware etc?
    Looking forward to your reply

  • Need help Flashing to MSI's new Bios revsion for the MSI GT70 0NC

    MSI just came out with a new bios revision for the MSI GT70 0NC I was wanting to know which bios revision is for my MSI notebook?

    Hello again my friend, yes it's me again. Here's a screenshot from our last bios flash you helped me out with. Remember I have Windows 8 and still used the MSI flashing tool because I have the older MSI GT70 0NC So I was wanting to know which of the new ones I can obtain and download for my notebook again.

  • MSI GT70 0NC Overclock Custom BIOS

    Hey!
    I have a MSI GT70 0NC. BIOS: E1762IMS.10U
    i7 3610qm 670m
    I'd like to overclock the CPU a little bit or at least to avoid the CPU throttling. Can you help me with a unlocked/custom Bios out?
    I only donated one Euro, because I didn't know how much money, you want for your good work!
    Of course I will donate more than just a Euro. Just tell me how much!
    Thanks and keep up your good work!

    Hello sammy
    Quote
    I'd like to overclock the CPU a little bit or at least to avoid the CPU throttling.
    About CPU throttling you can reflash to this MSI's test version:
    https://forum-en.msi.com/index.php?topic=162629.0
    Note that heat will be increased, if need i can offer you custom EC based on this one with improved FAN behavior to compensate the extra heat.
    Quote
    Can you help me with a unlocked/custom Bios out?
    Yep, custom unlocked BIOS + intel storage firmware update to the latest version
    and custom EC [if needs]
    Quote
    I only donated one Euro, because I didn't know how much money, you want for your good work!
    Of course I will donate more than just a Euro. Just tell me how much!
    Aha oki, check PM for some examples.

  • MSI GT70 0NE-438FR Unlocked BIOS

    Dear Svet,
    I'm looking for an unlocked bios for GT70 0NE-438FR.
    My GTX 680m is dead sadly.. I bought a GTX 980m to replace it.
    I saw a similar problem with same type of notebook : "MSI GT70 0NE-467UK Unlocked BIOS" : https://forum-en.msi.com/index.php?topic=250882.0
    Current details;
    OS: Dual boot Windows 7 x64 and Windows 10 x64
    BIOS Version: E1762IMS.30U
    EC Version: 1762EMS1 Ver4.14
    CPU: Gen3 i7-3630QM
    How much money do you need in donate for a complete unlocked bios ? (compatible with gtx980m if possible)
    Thanks a lot dude,
    Best regards,
    Jérémie

    donat received, after your current post i see you already re-flashed to correct one firmwares .71X & .T24 to support 9xx
    working on your current .71X to unlock all bios options and patch it to allow BCLK OCing
    and send back to you after 4-5 hours when its done
    until wait check PM what to prepare
    EDIT: It's now done, check PM

  • MSI GT70 0NC Firmware in Question? Which one is for my notebook?

    I am a bit confused with the MSI firmware page for my MSI GT70 0NC Notebook. I'm running Windows 8 Pro 64-bit which one of these out of the list should I download to have the latest firmware revision for my notebook??? Confusing to see along list. Yes, my keyboard has the backlight leds.
    Link: http://www.msi.com/product/nb/GT70-0NC.html#/?div=Firmware

    Quote from: 3dfuzion on 21-November-12, 14:30:39
    But I am running Windows 8 So which ones or which one do I need? I already clearly posted that I am running Windows 8 Pro 64-bit Is there two updates I need if so please advise which ones for Windows 8 Pro 64-bit. Thank you!
    I noticed 1504 says supports Windows 8 I flashed it and when I went into system bios I still see the same firmware version:  ME FW Verision: 8.0.0.1351
    Since you are using Windows 8, then go for 1504
    Quote
    I noticed 1504 says supports Windows 8 I flashed it and when I went into system bios I still see the same firmware version:  ME FW Verision: 8.0.0.1351
    This is ME FW, not EC FW. This is not suppose to change after EC update.
    This one should change:
    Quote
    EC Version: 1762-EMS1 V4.10
    Quote from: 3dfuzion on 21-November-12, 18:01:15
    I am running Windows 8  I noticed 1504 says it supports Windows 8 What do you mean about 1504 and 1414 [if you don't use Windows 8]<<<<< ? Can you please make since of your own statement technically speaking?
    If you use Windows 8 OS, then go and flash 1504,
    else [if you use different OS] then go and flash 1414
    Quote
    I updated the system bios to the latest revision. Now I'm just hopping to do the firmware upgrade. It sounds like a two part bios update for the firmware based on your reply. Please clarify your statement?
    Which BIOS ver you currently has?

Maybe you are looking for

  • How do I transfer Hotmail contacts to iPad as a pop3 account

    I hope you can help. I just got my ipad. I want to use my Hotmail account on my ipad. I spent several hours the first day figuring the right settings. When I delete messages from the iPad, I don't want the messages to be deleted from my computer. And

  • I've deleted the recently added and recently played tabs and want to get them back, how?

    Hi I've deleted the recently played, and recently added tabs on the left hand side of itunes, but I now want to gewt them back. I've tried to look online for solutions but they don't work, I get the icon up again, but nothing gets added. Am I doing s

  • How to write xml

    I'm a bit of a newbie to xml so apologies if I am going over old ground. I am trying to find the most productive way to write xml, every time I try and create an xsd from my file it keeps throwing up lots of validation errors, can anyone recommend th

  • Microsoft Outlook as default for email

    Have Adobe photoshop elements 8. Have tried every thing that's called for, but can not get my pictures into the Microsoft Outlook. The program still want me to go to Internet control panel to make the change and I've done that. What I'm I missing

  • Rollover slidelet from captivate 4 not working properly in 5

    hey guys, I'm using rollover slidelet for a presentation that shows video that is convereted to the proper file type.  I've uploaded to my site an it works fine.  But when I put the file into 5 the videos do not play when I put it on my site just can