MSi GT70 - 0NE-276us Sudden Power Off/Will not Stay On

First and foremost, thank you for taking the time to read about my problem. No sob story, however this is my only computer and it was/is my work machine in the IT Administrative/Deskside Workplace. Any ideas are welcome.
I have an MSi GT70-0NE 276us Laptop. I bought it last year (Christmas). I was playing a game on Steam when suddenly the machine turned off. Using my troubleshooting experience, here is what I tried:
-Removing the battery and power supply from the machine and holding power button for 1 minute
  -After testing with ONLY the battery inside the machine, pressing the power button makes a white flash and a shimmer of light sent to the keyboard, but doesnt actually turn on. It does this upon each keypress and does not skip a beat.
- I tried to connect the power supply directly into the laptop WITHOUT the battery connected, and it does the same thing. As for the battery indicator light, it does not stay on as it normally would when the power is connected to it.
  NOTE: I have NEVER used my laptop WITHOUT the power cord connected; it is always attached since I know its a power hog.
- I have checked for any smells of burning/melting and there are none. The laptop was also not that hot when it cut off suddenly.
- Ive blown the mainboard/underside with compressed air and removed all of the dust
- Ive made sure the fan was clear and connected
- Ive reseated the RAM
- I have NOT tried another power brick; the one I received was refurbished.
- The LED on the power brick lights up but nothing is coming into the machine
- I have not had the laptop 10 months and its always connected to the wall/power outlet
So if it is the motherboard, I wouldnt be too surprised but Ive know MSi to make excellent motherboards, hence the reason I spent 2500.00 on it. A fellow IT friend said I may want to try a new power supply that has the exact specs your laptop needs. As if its possible the load on the end of the power brick that goes into my laptop may be done for.
I removed the Battery and noticed this:
The inside of the laptop after removing the battery say
MS 1762
DC Rating 19V=9.5A
My Battery says (MSi battery)
11.1 Vdc = 7800mAh, 87 Wh
..But the power brick reads
Input 100-240 V ~2A 50-60Hz
Output 19.5 Volts =7.7 A
He suggested trying a new power suppy but Im concerned its the motherboard (because us IT Guys know the motherboard will get you everytime)
So is it possible? Im not sure why they may have given me the wrong power brick, if it is wrong. He says the specs dont add up, and since each time I press the button and the white light flickers and part of the keyboard, he said it may be the power bricks' node that connects to my machine. Im used to motherboards that are done for the machine shows no sighns, no hints, no flickers. This is atleast flickering, just not coming on .
I know its alot to read and I appreciate all of the techs/other users time.

Thanks guys. Your input is not falling on deaf ears and it seems im getting reputable support via the forums with the MSi tech team.
It really is so weird. Today I tried the process of elimination from a video I saw on you tube. Now, keep in mind, each time the power button is pressed with either their power brick/battery alone in the machine, the power light and the 'battery' indicator light at the front of the machine flicker (each keypress; even if you do it rapidly).
I took the bottom tray off and checked the fan and blew it out with compressed air. Checked the thermal paste under the processor heatsink, checked the processor condition and all looks well there.
Tested by removing one connection at a time then testing for power (all along while testing, keep in mind I only have the 19.5v 7.7 amp power brick.)
- removed D:/ drive secondary  then checked for continuity; no luck
- removed all 4 ram sticks and tested one at a time with the power supply connected; no continuity
- removed the keyboard ribbon cable and tested; still no luck
- removed (what I believe to be) the usb ribbon cable (hub with 3.0 ports) and tested for any indicator lights; still no luck
- unplugged the cmos for 5 mins and reconnected; still no luck
*NOTE: when I look underneath of the laptop when pressing the power button, the fan that has the gpu and the cpu heatsinks up against, it actually spins for a brief second; about as long as the power button flashes.
I stopped at some stores looking for a 180+ watt adapter and i couldnt find one that carried it. I wanted to test it before purchasing, so Ive avoided online purchase up to this point. However, I do realize I need one anyway at this point regardless.
My buddy has his own PC Repair shop. He doesnt have a power brick of that magnitude, but cant we get a voltmeter and check for continuity from not only the power supply, but also the jack soldered on the motherboard?
He is saying kinda what Dark is saying... Me, I think its a short somewhere... he thinks the computer asked for too much power from the power supply and probably burnt out the tip because at the time it cut off, I was playing a graphic intensive game, and in my USB 3.0 ports on a single hub, I had the following connected:
- A Logitech USB headset (wired)
- an XBOX 360 wired controller
- A Logitech G700 gaming mouse charging
Ive never had that many power hungry devices connected to one hub at one time before.

Similar Messages

  • MSI GT60-0NC laptop suddenly shut off, will not turn on again. Please help.

    Hi there,
    I purchased the laptop back in May 2013. Today I was using it and I just launched a game on Steam when suddenly it turned off immediately. It wouldn't boot back up again. I tried pressing down the power button for 1 minute (without AC power) and then connected the power supply and tried to boot but it would not.
    It did not overheat and I opened the bottom and cleaned all the dust to be sure. The battery is fully charged.  I tried booting again but it wouldn't work. I live in India and I purchased the laptop in Kuwait. Seeing that there are no MSI service centers here is worrying me. Anyone had a similar problem? Any solutions?

    I just had the same problem.  The power button flashes white for a sec, but nothing starts up.  The disk drive wouldn't even open, so it's probably a fried motherboard.  I just sent mine in for RMA, so it'll be a while before I get mine back.  I live in the US though, so I don't know how you're going to get service.
    Not much help from me, but sending it in is probably the best solution.  As for where, well, I can't help you there.

  • Iphone 4 slide to unlock and slide to power off will not work but all other touch features work

    Iphone 4 slide to unlock and slide to power off will not work but all other touch features work properly

    You will have to get it serviced.

  • External Display flashes on and off will not stay on.

    When I turn on my Samsung external LCD display which is connected to the iMac, it flickers on and off and will not stay on. What could cause this problem. I tried different resolution settings to no effect. I had been using the display without problems until recently. I wonder if it was a system software update.

    Are you using some sort of adapter to hook it to the Mac? I know on my iMac that I use an external monitor on I use a mini DVI to VGA connector. If you are using something like that it could be the adaptor.
    I would think if it was software there would be more posts on it. Yours is the only one I have read on this subject.

  • T60 suddenly switches off, will not power on again, DVD drive related?

    I have searched and searched for this, and although finding many "T60 will not power up" I haven't 
    found any with this twist.
    My T60 is ~2 years old, and the problem just started recently. Working on battery one day, the laptop 
    suddenly died - like instant loss of power. I could not turn it on again. One strange thing though: 
    When I removed the battery and re-inserted it, the batt-icon-light came on briefly (a blink). If I then pushed the power button it lit up for 1 sec and then went out, not booting. Repeating it, without removing the battery, it didn't light up.Ok, thinking maybe the power supply was dead, I took it completely apart, removing also the harddrive and the DVD drive. By chance I then saw that it had "fixed itself". I resembled it and it worked again, powering up like nothing had happend.
    Then it happened again yesterday. I read in here about the "push power 10 times, hold power down 30 sec" etc, but had no luck with that. Again, when I inserted the adapter cable the light came on (power plug + batt light) but when pushing the power button they went off, and if I removed and reinserted the plug same thing again.
    I then read about removing HDD and DVD drive, and that did it! So, it happened again today and this time I just removed the DVD - and it booted again. 
    So, after this loong description here I hope that some of you have tried/seen this before or have an idea what it can be. I left the DVD drive out, and it has not happened again...yet (it's been 5 hours only). 
    Ideas?
    Thanks in advance!
    Martin.
    Moderator edit: Removed duplicate copy of message text.

    Kaz wrote:
    Hi Nordal,
    I know this is an old thread, but since I too am now experiencing inability to startup by T60 and seems to be getting worse in the last months, I was wondering what additional things you may have learned in the last 2 years since facing this issue.  My system will typically be in standby or hibernate and when I open lid to start it up again, Power and Bat light go out and cannot start it.  No beep codes, nothing.  Previously, recovery was to pull battery (which is now new Lenovo as of last month and working great), hit power button a few times and then hold it in, put battery back in and AC adapter, then it would start up.  In last few days, this no longer works.  I have to go through similar step, but now I have to startup only with battery, once in Desktop, I can plug in adapter and no issue until next time.  I have three 90W AC adapter all putting out correct 19.5-20 VDC.  Have rulled out an adapter issue, I believe.  Concerned about something on motherboard being flaky, but cannot pinpoint issue.  A few days ago when this happened, I had to pull CMOS battery, wait a few min., then put everything back together and was able to boot.
    Have never pulled anything more than RAM, CMOS battery, main battery, and AC adapter.  May have to try DVD drive next time.
    Thanks,
    Kaz
    It's probably best to start a new thread instead of reopening one thats 2-3years old, but from what your describing it sounds like your slowly ruling out everything except the system board, nothing you don't know already.
    I don't normally deal with T60's, my main focus is T61, but I do have a source for the boards if you were to need one, as well as having a source to get the older boards reflowed. Some of the older models had problems with solder connections cracking when the board would flex, which can be repaired on an infrared reballing machine. My friend Dominic (realblackstuff from thinkpadforums.com) operates a website where boards are collected and sent off to be reflowed in wholesale lots. It's quite reasonably priced, as are the T60 boards pulled form grade "A" corporate laptops, but lets hope you can find a lesser component that is causing the problems.
    ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

  • TS3274 My ipad still refuses to power off will not let me slide

    The screen says not enough storage
    This ipad cannot be backed up because
    there is not enogh icloud storage available
    you can manage storage in settings
    CLOSE SETTINGS   
    it will not let me press either and also can not poere off

    can anyone help??????

  • Apple TV Power Cord Will Not Stay Attached

    I just got my Apple TV and it works beautifully except for one problem, the power cord won't stay attached. I currently have to brace the cord against the wall with a straight line to the power port on the unit. The slightest touch disconnects. Is there a trick to this I am unaware of? Or did I get the wrong cord with the unit.
    Apple TV    

    Thanks for the info. I just wasn't pushing it in hard enough. After waiting so long for this to come out I guess I was afraid of breaking it. Had to wiggle it in there but it eventually worked.
    Thanks again!

  • IPhone 4S trouble with Battery/Power, Phone will not stay on

    I've had a refurbished iPhone 4S for just over a year now and when I upgraded to 6.0.1 it was fine. But, after I upgraded to 6.1.3 the phone began having issues, but I'm not certain iOS is the root of the problem. First, it would cut itself off without a button shutdown and would not start back up. A hard reset would fix this, and I noticed the battery was not dead, nor even low. After a while of this, the phone would not start at all and I began restoring my phone almost every day, but by the next day the phone would be unactive again. Suddenly this stopped for a month. Now its back to shutting itself down, but in addition, it will have a full battery, cut off, and half an hour later, it will be hot. The phone is hot while its off. When I manage to get it back on shortly after, the battery is dead. So its having issues coming on, staying on, and maintaining a charge. I suspect a short in the battery or power equipment. Shorts are terrible for a battery this is going to kill my phone in a few months and even though when I first called Apple about this and I had my year left on my refurb, they stated I wasnt covered. Is anyone having a problem like this?

    See this Discussion
    https://discussions.apple.com/message/19521062

  • My late 2010 MacBook Air suddenly crashes and will not stay on.

    I returned from a trip during which I used my MacBook Air (Late 2010) constantly.  Upon leaving the hotel I closed the computer and put it into my carrier and did not open it until arriving at home later that day.  There was moisture on the keyboard and screen at the corresponding position in an area about the size of a 50¢ piece,  I cleaned that up and turned the machine on and it booted up and then created. Several times it would turn off and on a few times without any input from me. At times it will boot up like all is well but with any keystroke it crashes to a black screen.  If I had to guess, I'd say the HD is toast.  It was replaced under warranty once already. The moisture is a complete mystery.   Any ideas?

    What method were you using for travel? I think sometimes condensation can happen in flight. Sounds like there was more moisture on the motherboard as well. Leave it for a few days in the sunlight if possible and see what happens after that.

  • Request for MSI GT70 GT70 0NE-276US unlocked RAID Bios

    I'm looking for a fully unlocked bios for my MSI GT70 GT70 0NE-276US with the newiest RAID drivers... Will Donate. Thanks !

    Quote
    I was told.....
    "If you're getting an unlocked raid bios then I suggest that you have him update the Intel Raid Utility OROM also to 1.6.0.1702 or newer"
    oks
    Quote
    I have two 128GB SSD in raid 0 (SuperRaid as MSI calls it) I would like to be able to overclock the CPU if possible? I'm getting some lag spikes in games and I was thinking it might have something to do with the CPU...
    OC CPU maybe if you are familiar with the options, but let assume no or not recommended.
    about the lag spikes, there is special EC ver for GT70 which improves GPU performance and reduces throttling.
    available at: https://forum-en.msi.com/index.php?topic=162629.0
    NOTE: This special EC firmware is not for barebones, but only for retails models!
    other reason could be that dedicated GPU is not used, but integrated card while running this applications.
    Or VGA driver issue.

  • MSI GT70 (0NE-452) Refuses to Boot/random shut downs - BIOS problem?

    Hello,
    I recently purchased a MSI GT70 0NE-452 laptop from Xotic PC. It came with Windows 8, but since Windows 8 broke most of Adobe Premiere, Vegas, and After Effects, I wiped the RAID0 SSDs and installed Windows 7. I've reinstalled all the drivers and have been comfortably setup for about a week or 2. Unfortunately now, the laptop has been behaving strangely.
    1) Random shutdowns, regardless of whether I'm connected to power or not. And I know it isn't because the battery died. (This might be fixed now since I downloaded another driver for the CPU Thermal  Control)
    2) Laptop won't turn on first-try. I press the power button and the power button flashes orange but nothing happens. It will only turn on once I've removed the battery and put it back in.
    I have a feeling this could be a BIOS problem, and possibly attributable to the Windows 7 reformat, but I'm not sure. My BIOS is currently: American Megatrends Inc E1762MS.50U, 11/23/12.
    The MSI website for my model has a Bios update:
    Release Date: 2012-12-14
    Description: Fix HDMI/DP hot plug no function after S3 resume
    Non-Win8
    E1762IMS.30R
    Can someone please advise? Should I try my hand at flashing the BIOS with this update and hope it solves the problem, or should I just call MSI and get it fixed by them?
    Any help is much appreciated, thank you very much!

    I'll take your advice but can you clarify a bit? Is it something beyond a BIOS repair?

  • MSI GT70 0NE , GTX680M (4GB)

    Dear All,
    I was totally happy to buy the new MSI GT70 0NE , GTX680M (4GB) but unfornately after three weeks of heavy games (Black OPS II, MW3) using I have observe the following:
    - The AC adapter making a buzzy noise in all laptop senarios (idle or full load). 
    - The laptop fan making noise in idle mode even with the built graphics card (Intel HD4000). 
    - Some time when game scene load it I get slow perfomance. 
    Currenlty I'm not happy for the mentioned issues for expensive laptop which should not be there ....
    I would appreciate if some one from MSI read my problems and advise how to slove those issues.
    Regards,

    Occasionally I've had poor performance happen in the middle of the game....Not sure why, but then if I hit the turbo + fan buttons, almost instantly I get the performance back. Most likely the notebook was getting too hot and throttling the CPU/GPU, in my case.
    The buzzing from the power supply could very well just be that you have 'dirty' power at your residence. Not impossible in the least, and I used to deal with this as well. I have a power conditioner/UPS now and I hear no such buzzing. Just something to consider. It's difficult to manufacture and design a power supply that will work great in all scenarios and is small and lightweight.
    As Svet said, contact MSI support, they will be the ones that will get things straightened out. By the sound of it, perhaps your fan is bad and that is why the game performance is lacking......

  • Unlock for MSI GT70 0NE-446US?

    Hello,
    Tomorrow I am getting a new MSI GT70 0NE-446US.
    I know I am going to be running into problems with the Nvidia Optimus interfering with some games and streaming of said games.
    Is it possible to get an unlock for this laptop bios that allows turning off the discrete Intel bios?
    The most up to date bios (according to MSI site) is w8_E1762IMS.70U.zip
    This is the Windows 8 version with the SATA defaulted to RAID mode.
    Hopefully it is possible and once I get it tomorrow, I will donate (or whenever said bios is available).
    Thanks for all the help!

    Hmmm.  I have heard that people with optimius systems have been able to use unlocked bios's to be able to disable the optimus auto detection feature and just run the nvidia chipset full time in windows (Aero runs under the Intel chipset normally which is good for battery, but bad for performance).
    I thought that when the bios was activated to do this, it doesn't actually disable the Intel, just keeps the nvidia chipset on and just uses the Intel for the output (supposedly normally when the nvidia chipset is being used for a game, it is just writing to the video memory of the Intel chip).
    Regardless, if I give it a go, and it becomes a black screen, is it possible to reset it back, or would I be screwed?

  • Request for MSI GT70 0NE-609US Unlocked Bios

    I bought MSI GT70 0NE-609US Dragon Edition. An I've upgraded some parts as mentioned below
    Processor Intel i7 extreme 3940xm 3.0GHz (Boost 3.9GHz) Ivy Bridge
    Ram Corsair 32GB (8x4) 1866 MHz
    Gaming Graphic Card Nvidia GeForce GTX 680M 4GB
    Hard Drive mSATA SSD Mushkin Atlas III 480GB (240X2)
    2nd Hard Drive Corsair Neutron GTX 480GB
    Win 8 Pro with media center
    Bios E1762IMS.70U
    As you see I have an ultimate laptop. But the problem ud that the laptop not giving the performance that I'm looking for.
    When I  checked with CPU-Z i found that the CPU, GPU and RAM not giving their full perfornane. For exalmple the RAM. it should be 1866MHz but in CPU-Z it shows that it works only on 900 MHz which is almost 50% of what it should be.Even the CPU & GPU same problem.When I google I found that there is some sitting in bios need to be increased.But unfortunatily my bios is locked and I cannot do anything for ram cpu and gpu.also I need to overclock gpu & cpu and get maximum performance using this laptop
    So if anyone can help me in this issue will be highly appreciated.Thanks

    yes, double post and also in wrong section was removed.
    here is the reply:
    Quote from: Froggy Gremlin
    CPU-Z reads 900? That is correct for 1800. DDR=Double Data Rate, 2X900=1800. Probably produce too much excessive heat anyway even if the BIOS was unlocked and the VGA and CPU were OC'd.
    Quote
    or exalmple the RAM. it should be 1866MHz but in CPU-Z it shows that it works only on 900 MHz which is almost 50% of what it should be
    900 means 1800 as Froggy said
    I can unlocked the BIOS and you can play with memory timings and speed. But your ram is already running in near top shape.
    Quote
    But unfortunatily my bios is locked and I cannot do anything for ram cpu and gpu.also I need to overclock gpu & cpu and get maximum performance using this laptop
    So if anyone can help me in this issue will be highly appreciated.Thanks
    GPU OC is not depend of BIOS, but vbios
    about CPU, yes some blck which to allow some OC could be possible,
    but its not guaranteed. some people report that they has no effect, while others can get some further CPU OC.
    Quote
    And abot donation don't worry I will be too generous. I will donate after 6 hours. But I hope That I get what I want as soon as possible.
    about BIOS unlock i work asap

  • NVIDIA GTX 880M upgrade for GT70 0NE-276US vesion, MS-1762

    Hello, i recently purchased a GTX 880M and i am having difficulty in making it work. It seems i don't have the right driver for it, probably bios driver or something that will make my motherboard recognize it.
    System info:
    GT70 0NE-276US
    Bios: E1762IMS.30U
    Date:01/21/2013
    EC version: 1762EMS1 ver4.14
    EC Build: 09/10/2012
    thank u

    Hello, i recently purchased a GTX 880M and i am having difficulty in making it work. It seems i don't have the right driver for it, probably bios driver or something that will make my motherboard recognize it.
    System info:
    GT70 0NE-276US
    Bios: E1762IMS.30U
    Date:01/21/2013
    EC version: 1762EMS1 ver4.14
    EC Build: 09/10/2012
    thank u

Maybe you are looking for

  • Files arranged by date added, but changing file name changes date added

    I've got my Downloads folder set to view (in the Finder) by "date added", a very useful feature. However, if I change a file name, the "date added" changes to that new time, and "date modified" stays the same as it was. This doesn't make sense to me.

  • Should it take 7+ hours to export my 2 minute video?

    I converted footage from my flip cam to apple ProRes 422 in Quicktime 7. I did some quick edits, threw a few fllters on there & made a minute & a half video. Iopted for the simple share feature to export the movie for youtube. It's been transcoding f

  • Error in value contract

    hello gurus, I have created value contract and i was released that contract with reference  to the document number and  i was billed for the amount and i released to the accounting and payment also received but the problem is the contract document ov

  • Pdfs sent as attachments to email do not display comments made to pdf prior to sending

    What is the trick to getting pdf attachments to display comments when viewing on ipad?

  • Relinking Forms and Reports executables

    Hello All, I am relinking forms and reports, using below commands, as part of Java 1.7 downgrade. cd $ORACLE_HOME/forms/lib32 $ make -f ins_forms.mk sharedlib install cd $ORACLE_HOME/reports/lib32 $ make -f ins_reports.mk install What i found is, the