Msi gt70 2PE integrated HD 4600 graphics HDMI port does not appear to work.

Hi guys,
I have the GT70 2PE with integrated hd 4600 graphics and with a dedicated nvidia geforce gtx 880m card. The HDMI output does not appear to work.
I'm tech savvy and cannot figure this out for the life of me. have tried nearly everything.
lets start from the low level troubleshooting done:
- plugged in the HDMI cable from a working computer that has HDMI hooked up to it. This did not make a difference from the new cable I bought for hooking up my TV to my laptop.
- booted the laptop up and do not see a duplicate screen outputting via HDMI, all my video cards in my PC's I've built prior have always shown the HDMI output as a duplicate screen when I had a monitor hooked onto a PC. This makes me believe the HDMI port may be disabled/broken as there is no HDMI output at POST. Only the laptop monitor displays output.
In Windows 8.1 I've installed the latest 4600 drivers and nvidia 880m beta drivers.(even though installing nvidia drivers shouldn't matter since I've read the HDMI output is tied to the 4600 integrated graphics chip, also if during POST the HDMI output never showed up on my TV, then installing the latest intel graphics drivers shouldn't have made a difference either, which it didnt make a difference).
I've tried disabling the integrated graphics card then re-enabling it, as noted on the intel forums. - does nothing.
what I've ruled out:
-HDMI cable issues = no issues due to other PC's and devices working with the cables. All cable tests are direct connect to the TV, no intermediary devices such as hdmi splitters etc.
-BIOS has zero options for graphics card options.
Any ideas before i RMA this laptop? I'm at a loss.

OP's problem has been solved. Also please don't resurrect and do not hijack other people's topics. Open your own one.
>>Please read and comply with the Forum Rules.<<
Topic Locked

Similar Messages

MSI GT70 2PE Pro Shuts off after power up and sleep mode, then works

I got this laptop less than a year ago and I am kinda getting upset about my decision buying it. It is the GT70 Dominator Pro with the GTX880M graphics card.
Only thing I did was install a SSD drive for my main drive and use the 1TB drive that it came with as a storage drive. Everything was working perfectly for about 4 months without any issues.
My problem started with the laptop shutting off in the middle of playing Watch dogs and wouldnt boot to windows, so i went to the BIOS and found out for some reason it changed my primary drive to the storage so i changed it back and all was good. After about a month it similar thing happened but this time I couldnt even get to the BIOS, after pressing the F10 or whatever it is for BIOS the computer freezes in a black screen.
I contacted MSI and sent it out for warranty, they had to change the whole motherboard as it was not serviceable (Issue was a faulty MB).
Last week the laptop started acting up again, here is my issue. When powering it on the fan and light comes on but after couple of seconds it turns off, then powering it on for 2nd time it works. This happens 80% of the time, i have to turn it on twice before it works. Even more frustrating thing is when it is at Sleep mod, I press the power to wake it up, so it does but before getting to windows screen it shuts off.
I was wondering if anyone have similar issue like mine or know what could cause this. My tower PC that i built have a MSI board and graphic card thats why I went with their laptop but I had pretty bad experience with it so far and its not a cheap laptop either. I might have to go through another warranty work if it keeps giving me the issue.

Try update IRST driver.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24006

MSI GT70 2PE Low FPS in game

Hi all,
I just bought a MSI GT70 2PE without OS and installed Windows 8.1 and all drivers downloadable on msi.com.
I'm getting an ultra low FPS in World of Warcraft , a ten years old game !!!!
Watch my joined screenshot. Do i have miss something ? Is it really possible to buy a recent notebook with such bad gaming results ??

Yup that is what I needed, now I know your laptops specs. Seems it runs a GTX 880M which should really have no issues at all running games like world of warcraft. Right, first of all, Did you install all the Chipset drivers and so on from the MSI website and are you using the latest Nvidia Drivers?
As HCH mentioned, make sure you are running the game on the dedicated graphics card. You can check this easily as the power button will be orange if it is using the Nvidia GPU and White if it is using the Intel Intergrated graphics.
Also, make sure you are connected to net power when gaming.

MSI GT70 2PE-1620 Recovery problems (no F3 recovery)

Hi,
I'm the proud owner of e new MSI GT70 2PE-1620. But now I have some serious problems restoring Windows 8.1 back on it.
This GT70 has 3 SSD disk, in super RAID 0. For some reason the RAID failed and I to restore the RAID setup again. Which was successful. However my C partition was cleared. Now I have trouble resetting back the GT70 back to the factory setting, because the F3 function during startup does not function. The hidden partition with the MSI recovery files are still there: on the second disk (1 TB disk). I checked using Acronis Disk Manager.
I tried restoring back with a Windows disk (ISO download from the internet), but then I miss all my MSI tools and drivers. I do not have a MSI recovery CD/DVD disk.
Please help me to restore this GT70 back to its factory setting.
Secondly: can somebody tell me what the BIOS settings should be (factory setting) for this GT70. Ex.: should the boottype be UEFI or Legacy?
TMinus

Quote from: hch;112898
I've found a share which might be helpful.
Try this:
1. Run the command prompt as administrator.
2. Type "reagentc /info" and press enter to check the recovery image location and you should see it shows 0 as null.
3. Type "diskpart" and "list disk" to check your drives.
4. Select the HDD drive where your hidden partition is locate. Type "select disk X" (X is the disk of you HDD)
5. Type "list partition" to find your hidden partition. (You'll need the partition name for the recovery directory later.
6. Type "exit" to exit the diskpart, then enter "reagentc /setosimage /path \\?\GLOBALROOT\device\harddisk1\partition4\RecoveryImage\ /index 1"
(*Note: 1. The harddisk1 is the drive name of your HDD, where your hidden is locate. 2. partition4 is the partition name of your hidden partition you read from step5.)
After setting up, you can use the windows recovery to do the system restore.
This should be able to help you restore to the factory settings.
*You can only choose the option to restore your whole system, so please backup all your files before doing the restore.
Thanks! I will give this a try. I will you know if this worked. One question before I try this:
Will this help me restore to the SDD disk? The hidden partition with the restore files is on a 1TB disk. Originally drive D: in Windows. The SSD disk should be C:, the boot disk with the OS.
** UPDATE:
I booted using a USB HD with recovery Windows files, and open up the cmd window. It tried, but it can not find or recognize the "reagentc" command. What am I missing?

MSI GT70 2PE-1616NE (Dominator Pro) - help needed

If I buy MSI GT70 2PE-1616NE laptop, and if I want to clean install Windows 7 into it (it becomes with Windows 8.1 pre-installed), do I have to configure something, why I ask is that this laptop has 256 Gb SSD MSI Super RAID and I assume that it needs some configuring to get it work like it should. It's not like HDD though.

No, you shouldn't need to configure anything except changing some settings in the BIOS (set it to boot in Legacy mode), and I would also ensure that you use the MSI Burn Recovery tools to make a recovery DVD(s) or recovery USB, in case you decide to ever go back to Windows 8.

MSI GT70 2PE 880m Bus Interface Question

I recently purchased an MSI GT70 2PE with an nvidia 880m gpu
The question i have is should the card be running with a bus interface of x4 at all times?
gpu load when other screenshot was taken:
The above is a screenshot of gpu-z while running its render test
the bus interface always reads x4 3.0 even with games such as planetside 2 running at max settings
I am on the latest nvidia driver and did install the vbios update from msi
From other forums ive gathered it should be running at x8 when idle but should be reaching x16 when running games or stressing the card?
If so is there any way to get it to work correctly?
Edit:
The only other state i have seen it in is this:
which is x4 1.1

Quote from: zipper.sippola on 05-August-14, 02:13:36
Probably GPU-Z isn't up-to-date with 880M; my 680M is recognized as x16.
This is probably it. Even though the 880m is a refresh of 780m and has been out a while. There are still plenty of programs and utilities that don't even identify it or know what it is. I'm sure things will get better.
If you really need/want to know if it is 4x or 16x lanes, then run a game on it with clear documentation of settings for that chip and results on a non multiplayer game. If your laptop isn't running all 16 lanes, then it should run far slower than the rest.

MSI GT70 2PE 1624XNE Dominator Pro

Hello.
I've been waiting for a MSI GT70 2PE-1616NE, for 4 weeks now. And really need a new laptop, since my old gaming is broke. Then i saw a place that have MSI GT70 2PE 1624XNE Dominator Pro in storage. but it only has one 128gb sd.
Can i put 2 more in it? at raid 0, so i have 384gb on my c: or do i need some ekstra parts beside the ssd storage to do that? or what is posible to do?
Hope someone can help me, really need a new computer.

The mSATA to SATA adapter should be bundled in the unit since you already have one SSD.
If so, then you can add two SSDs on the adapter which already has three mSATA ports.
You can confirm with the local store about the adapter.
If you want to do the self-upgrade, I'll suggest to buy two SSD which is same as the one you already have. Then you'll be able to have a good performance meanwhile prevent the possible compatibility issue. You can also ask MSI service center for the MSI approval list of SSDs. It's recommanded to use the same SSDs.

MSI GT70 2PE-1622NL Dominator Pro

Hello
I need to buy a laptop for my study so i decieded to buy this laptop to be ready for at least 4 of years oncomming gaming.( I know its way too much for just study buy you know...880m )
Now according to my teachers we will be using hyper v ore Windows Server Virtualization, Does this laptop have the capabality to run this application flawless, i have done some reasearch and i cant find a normal answer because most of the threads don't have the dutch version of the dominator pro .: MSI GT70 2PE-1622NL :.
Sorry for the bad english, and thanx for reading .\/ Gr Yuc

http://ark.intel.com/nl/products/78937/Intel-Core-i7-4810MQ-Processor-6M-Cache-up-to-3_80-GHz
YAY!!!!! It supports intel vt thanx for the reply guys this realy made my day cant wait to buy it.

MSI GT70 2PE LOW FPS

My brand new MSI GT70 2PE DOMINATOR 880M with 8GB of video memory was working just fine, after about 3 weeks of usage, roughly 2 hours a day of Call of duty it started giving me low fps after 10-15 minutes of playing.
These are the following which I have tried to fix the problem:
Changed advanced power settings for maximum performance.
Changed 3D settings for each game individual to have maximum performance in power settings
Changed 3D settings globally to have maximum performance in power settings.
Obviously I have chosen NVIDIA GPU to be used.
When none of these worked, I tampered the void sticker and changed thermal paste, some of the paste was off the GPU and CPU but mostly it was there, so changed it, for both, screwed it back together, and NOTHING HAS CHANGED,
Temperatures before changing the paste and after did not change as well, while playing are around 60 celcious for GPU and CPU, 140 Fahrenheit.
So after 5 minutes of playing with new paste FPS drops again to 10 FPS per sec in COD, and this is the case for every game that I have, total war series, cod series, poe, skyrim, every game.
So does that mean that my GPU is faulty ?
One thing I've remembered; while I had this issue already, I switched off power plug and played on battery i Played total war 2 on strategic map mostly so fps wasn't noticeable there, after power for to about 28% I switched power back in and started playing COD, for 2 hours while it was charging and I was playing FPS was perfect. Next day problem was there again, I tried to do the same, switched it off till it got to 30% switched power back to play in hope that FPS will be normal, but it was never like this agian, same 5FPS problem.
And also during 3 weeks of playing I noticed that my power button was mostly of white color, it was changing sometimes to red but mostly white, right now it is only red, if you guys can help me out, id really appreciate it, really this is most powerful notebook there is, i saved for year to get it and I got this crap, I am very very

So I might have something here, during 10 minutes of play with normal FPS and also while not running anything, 4 cores gave readings:
0:3692-3791
1:3592-3692
2:3592-3692
3:3592-3692
So not numbers in between, just these 2 figures for each core
While not running anything readings on CPU temperature would change randomly between 48c and 55c every 1/3 of a second on every core, every core had different readings in between these ranges.
After FPS drop readings changed at once to:
0:3292-3791
1:3292-3692
2:3292-3692
3:3292-3692
CPU clock would change every 1/3 of a second and also ratio would change rapidly 33,36,37
I closed the game, for 20 minutes leaving notebook turned on, readings stayed the same giving "after" fps readings, I tried to launch the game again, there was
immediate low fps
Consistency of readings on CPU temperature while running the game before and after FPS drop look the same and would change randomly between 54c and 60c every 1/3 of a second on every core, and for every core temperature would be different
I left notebook for 30 minutes, turned off power fan, and temperature would be between 60 and 64 on some cores and 64 and 69 on others, while not running anything..can that mean that I applied new thermo paste incorrectly ?

MSI GT70 2PE DP keyboard software

Hi there...
When I got the laptop, it was bearly working at all, but after returning it and they changed 4 or 5 things in it, it have been working very smooth:-) However, got it back with win 8, instead of 8.1, not a prob... but, for the keyboard, I only got a MSI Keyboard LED manager installed, and not the steelseries program that let me config whatever key to the function I want... that function was actually one of the reasons why I bought this pc soon a year ago, and need it back... BUt can
t seem to find it on the MSI GT70 2PE DP site or the disk that followed the pc, anyone know where I can get this?
thx:-)

You do not need KLM to make your keyboard stunning. SSE can be downloaded here:
http://www.msi.com/support/nb/GT70-2PE-Dominator-Pro.html#down-utility&Win8.1 64

MSI GT70 2PE-1041US Drivers

hello everyone:
I can't find drivers and bios updates for this computer
MSI GT70 2PE-1041US
can anyone post a link for me ty

you can dl drivers and so from here
http://www.msi.com/support/nb/GT70-2PE-Dominator-Pro.html#down-driver
about bios you shall not upgrade bios if you dont have any critical issues with it, if you do then you may upgrade the bios other wise it's not needed.

HDMI sound does not

HP DV 7 running Windows 7 - no sound coming through HDMI cable to Samsung HD TV. Change HDMI cable to another HP DV 7 and it worked. Checked sound setting and it seems to be enabled. >> Help!

Hi,
This is from Dell forum:
General Instructions for Setting Up HDMI Audio
Preliminary steps:
1. Plug the laptop into a power source. Some of the models have a power management scheme that will not allow for HDMI audio while running on batteries. Later, after you get your HDMI audio working, if you find that it still does not work on batteries you can change your power management settings in the Control Panel.
2. HDMI has its own audio driver separate from the audio system of the computer ( Sigmatel, IDT, or Realtek ) . It is incorporated into the graphics card's driver so make sure you have the newest version of your graphics card driver. On models with Intel graphics the HDMI audio driver will appear in the Device Manager as "Audio Device on High Definition Audio Bus".
3. Turn off the computer and TV before connecting the HDMI cable. Later, after you get your HDMI audio working, if you disconnect the cable while the computer is running and lose your audio, try closing and then re-opening whichever program you were using that generates audio.
4. Every time you try a different solution you should reboot the computer. HDMI audio is extremely finicky and seems to usually need a reboot.
Make the Connection:
1. Connect the HDMI cable to the computer and TV. If the TV has a "DVI/HDMI" port do not use it. Use a port for HDMI only.
2. Turn on the TV and select the HDMI port you are using. Adjust the TV settings to receive HDMI audio if any.
3. Turn on the computer. (Optional, some people close the laptop lid immediately after hitting the power button but I am not sure why. Most people should not need to do this.)
4. Optional. Some models do better if the TV is set to be the primary display. To set, repeatedly press Fn+F8 (or ctrl+alt+F4) to cycle through the settings (laptop display only/laptop display plus external display/external display only). Reboot the laptop.
5. Go to Start>Control Panel>Sound>Playback tab. Make "HDMI" the default device. (If "HDMI" is not there, right click in the white area and look under "Show Disconnected Devices" or "Show Disabled Devices" and see if it is there.)
Post Connection Problems:
1. If there is still no option to select "HDMI' as the default audio playback device, try re-installing or updating the graphics driver, or even try an older version. The graphics driver is the driver for HDMI audio, not the regular audio driver. A few people with Intel graphics had better results by uninstalling the graphics driver, rebooting, and letting Windows look for a driver (instead of downloading the driver from the Dell support site).
2. Try disconnecting and then reconnecting the HDMI cable.
3. If you are using Windows Media Player or Windows Media Center but get no HDMI audio even after it is selected as the default playback device, go to
Control Panel>Sound>Playback tab>Audio/Playback device>HDMI>properties>Advance>Exclusive Mode and uncheck "exclusive mode".
4. Try a different HDMI cable.
5. Try a different HDMI port on the TV
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HDMI does not appear in playback

I have no audio when I connect my HP Pavilion dv4-1435dx Entertainment Notebook PC to my Panasonic TV via a HDMI cord. The picture is great, but audio will only go through my laptop speakers. I have updated all of my devices, I have tried using Intel's website to verify I have all of my drivers updated. I have also checked on my playback to show all disabled devices and HDMI does not appear. I have uninstalled and reinstalled to no avail. I have even verified that the settings on my TV are set to digital audio. I have tried uninstalling the Intel High Definition Audio HDMI, plugged the HDMI cable to my laptop with the TV off, reboot and still no luck!! The only options I have for playback are "Speakers and Dual Headphones", "Independent dual headphones", and "SPDIF" My computer is an upgrade from Vista to Windows 7 64-bit. I am getting way too frustrated over this and have searched every forum imaginable for a resolution to this issue, please help!!

Hi,
Try this to see if it helps. Download the Chipset driver and Graphics driver on the links below and save the installers to your Desktop.
Chipset Driver
Intel Graphics Driver
Next, in Device Manager, open Display Adapters, right click on the Intel graphics chip and select Properties. Click the Driver tab and then select uninstall. When done, do the same for the for the Intel High Definition Audio CODEC and the IDT High Definition Audio CODEC, found under Sound Video and Game Controllers.
Now return to the Desktop and install the Chipset driver and then the Graphics driver. When complete, reboot the notebook and see if this has helped. Check in Device Manager that both the Intel Graphics and the Intel Hi Definition Audio codec have reinstalled successfully and whether you now see the HDMI Audio option under playback devices ( found in Control Panel, Sound ).
If it shows up correctly, try the HDMI connection and see if it now functions properly.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

The 15" Retina's will have better performance than any 13" Retina. Not only do the 15" machines have dedicated GPU's, but they also have quad-core processors, whereas the 13" Retina's only have dual-core processors.

Msi gt70 2PE integrated HD 4600 graphics HDMI port does not appear to work.

Similar Messages

Maybe you are looking for