Msi gt70 dominator pro, battery not charging..

I have taken out and set inn again the battery, i have restarted the pc.. not what i expected from a two day old pc of this price class.

If the battery isn't charging, there isn't much anyone here can do about it.
Your best bet is to contact MSI for an RMA, or return the laptop.
>>How to contact MSI.<<

Similar Messages

MSI GT70 Dominator Pro Inconsistent Frames

I have MSI GT70 Dominator Pro and I noticed that there has been slight decrease in game performance after playing the game for 7-8 hours. I am currently playing Tomb Raider 2013 and before I started playing the game I did a overall performance test of my laptop with a built in benchmark.
My Specs:
Intel Core I7-4800mq
Nividia Geforece GTX 880M 8GB
1920*1080 LCD 17.3 inch Screen
16 GB Memory
1TB 7200RPM-128GB SSD
Initial Benchmark before playing the game.
Tomb Raider (2013) on Ultimate setting (Tressfx on)
Min-34
Max-68.0
Avg-49.1
Post Benchmark after playing for 7-8 hours
Tomb Raider (2013) on Ultimate setting (Tressfx on)
Min-28.2
Max-58.0
Avg-40.7
Note: GPU and CPU same temperature on both initial benchmark and post benchmark. GPU (max-76C) and CPU (Max (55C). Same background programs and same video card drivers and same game version. I would like to know why there has been decrease in performance even though the factors are the same.

Welcome to the MSI club buddy! ....there have been quite a number or threads about inconsistent/low frame rates. I too own an MSI GT60 with GTX870M and seeing inconsistent frame rates. Hope some vbios update fixes this

MSI GT70 dominator pro 890 For workstation

Ive posted this on the 'workstation' section, as it would fit better there, but my laptop is technically the gaming. So, yes it is a double post one in each forum.
Wanted to know if my laptop was good for rendering, if there were any tips or tricks for using my laptop for video editing, or any tips or tricks for using vegas pro 13 in general. Newbie to this program, normally use cyberlink powerdirector 12.
MSI GT70 Dominator Pro 890
i7 4810mq (4900)
32gb ram
3x 480gb crucial m500 msata (non raid - 1 OS - 1 media source - 1 scratch disk)
1tb Samsung evo 840 2.5" (partitioned 50/50 split - 1 Media export - 1 Regular data)
Gtx 880m 8gb gddr5
bluray burner
Thermal paste was repasted with antech diamond 7
normal 17" tn 1080p panel
Question of the rendering process. If I have gpu accelerated turned on in normal preferences, but render using cpu only in the actual final render as options screen,, my 15 min movie takes about 22 min. Temps skyrocket cpu wise for first 5 seconds then calm to 90c (80c with turbo fan), gpu gets to 70c (60c with turbo fan). CPU is around 80% resourced, gpu core max, memory clock max, gpu load 15%.
But if I have same gpu acceleration on main preferences, and change to gpu rendering only under the actual final rendering as options, it takes 28 min, cpu is at 68% (80c max fan), gpu core and memory max, gpu load up from 15% to 30%, memory controller up from 3% to 11% (65c temps).
So what I see is that gpu rendering preferred options but render cpu only, uses some gpu but more cpu, and gives faster results, than total gpu rendering with more gpu power and less cpu.
Shouldn't gpu rendering be far quicker than cpu? I know my cpu is good, but thought that the 880m would definitely beat it out in rendering.

Quote from: BlueAlexFPS;108317
Normally I would like to say this is very good choice, but since MSI have real workstation, I recommend you check below link to find the real machine for OpenGL graphics works!!
http://www.msi.com/product/workstation/#?category=GT Series&category_no=1151
Yup, great recommendation, and also what I thought and spent about 2 weeks researching before not buying. The most often supplied k2000m chip is crap. What it does for professional programs could be compared to the gtx 755m. The k3000 gpu is a decent mid range chip, but the k3000m is a low end. I'd compare it to the gtx 765m for gaming. Only real benefit would be specific drivers. The k4000m is the equivalent of the 870m but for professional. But isn't offered until you hit the $3000 mark. Reading so many reviews and watching several youtube videos showing side by side geoforce vs quaddro, and some programs like photoshop and vegas pro are actually rendered quicker on the geoforce. While Autodesk and maya were within a min of each other.
I know you probably saw this chart
I saw it to, which in the very beginning of my laptop search I thought I had found the perfect laptop. But after reading user forums, talking to/with people first hand, then watching some you tube showing side by side 780m vs 3100m rendering. I decided that until I could get the 4100m at a decent price, the 880m would suite me well.
The 'workstation' laptops are also 4700mq not the 4800-4810mq.
https://www.youtube.com/watch?v=VGP0ga6salw
Heres one of photoshop comparison
https://www.youtube.com/watch?v=ryf4b6BMjNk
heres a 2 year old maya comparison. While this one is a little off. I found one a few weeks ago that was perfect and I really should've short cutted it. But for maya and solid works, the geoforce is either right behind or right ahead for speed. But when it comes to quality, the quaddro's cant be touched.
When I use solidworks/maya for a project, normally its just something really quick. In which 100% detail isn't important, but speed is. If/when I need a perfect product, that's what the pc is for. My major projects even on a k4100m (the best mobile chip) it would take countless hours to render. My pc, dual titan black, would take 30-60 min. So I could use laptop to start and work with project, the 880m does a great job at in project editing acceleration, then i save file/settings export. Load on pc, make sure everythings still good, and render on there. But typical large projects are better done on high dpi mouse, mechanical keyboard, and larger monitors.
I'm not slamming you at all. Thanks for the comment, typically you'd be 100% correct. And if i didn't have a full out rendering pc, that would be my only option. Plus, i hope you or anyone reading this learned a little something. Or if im wrong somewhere, i can be corrected and learn something.

Msi gt70 dominator pro /win 7

Hi just bought the gt70 and i,m looking to install windows 7 instead of win8.1
is there any drivers/utilities for win7 ?
thank you

Quote from: thewarturtle on 28-April-14, 00:08:15
Hey take it from me man Windows 8.1 kicks windows 7 arse on this machine!
In playing around with 8.1 it seemed a bit sluggish to me, not to mention i greatly rely on the start menu. (yes, i know i can download a multitude of "start menu" programs for 8.1).And In all fairness, there are a few things i like about 8.1, like the expanded task manager., and easy access to various recovery features (like booting directly to BIOS), but all in all, i still love my windows 7.
In any case, if anyone is interested i have a GT70 2PE Dominator pro
i was able to successfully install Windows 7 in UEFI mode, so i have a dual boot Win 7/Win 8.1 machine now.
All the windows 8.1 drivers had win7 drivers in there too. The only thing i couldn't install was the ENE Tech hardware radio button, because there are only 8 drivers for it. Not even sure what's it's suppose to control, as all my buttons at the top seem to work fine.
SO far, everything is working great, and i have no "unknown devices". I even installed most of the MSI "extras".. Battery calibration works, Dragon Center works, SSE works, Sound Blaster Cinema works, i didn't install the SCM or the supercharger though.
SO for anyone who wants 7, it's an easy install (in legacy mode). Just make sure you grab all the drivers before you install because you won't have any internet access until you install the killer network drivers.
In UEFI it requires just a little bit of work to change some windows 7 files to allow it to boot into uefi, of course i also made things doubly hard, because i also just had to use a USB 3.0 flash drive in a USB3 slot (which requires even more tweaking of the windows 7 files).
In the end i got it all to work, so far.

MSI Gt70 dominator pro connecting second monitor questions

I have the new dominator pro, when I plug in my monitor (23" asus ips) it automatically runs off my gtx gpu. Light turns on, heats up (not hot but not idle). Is there any way to change this to run off intel? I'm not doing anything at all that would require descrite power, right now im just trying to have vevo on monitor for my son to watch videos while I work on my laptop screen.
I know with my asus g750 laptops it was always defaulted to intel gpu when connecting second screen.

Quote from: Dblkk;108055
Yea, I tried that. That's how I always set up multi monitor (then I have the extend/clone/ect options. But when I did that, the resolution was horrible, the picture was a good 4 inches from each side (left/right) and all the way top to bottom. All settings were full screen, regular resolution, eveyhing exactly the way it runs on my other machines. Just total crap on my msi, and NVidia graphics were still on.
I searched all settings and everything looks legit, but NVidia graphics are in charge. Maybe that's just the design of the msi, whenever a second screen is used, it just defaults (without user control) to NVidia. Maybe bios or something hidden?
Not a huge issue, just wasn't sure if it was a common msi thing with an easy fix or not.
I forgot to ask something as well. How is the monitor connected? HDMI? DVI? DP? Maybe a diferent cable might change the result? I'll try the monitor thing on my demo unit when I'm back at Memory Express on Sunday and update.

2011 MacBook Pro Battery Not Charging

17" 2011 MacBook Pro 2.2ghz i7 8GB RAM (upgraded OWC), 128GB SSD (in optical bay), and stock 750 GB HD. Running Lion. Battery cycle count: 15
Battery is not charging after a heavy GPU or CPU load (gaming, editing, HD movie streaming). Tried multiple SMC resets and a PRAM reset. It was charging after you let it sit for several hours. I sent it into Apple for a repair and was rejected because of the missing optical drive (that's another story), anyhow, when it came back it won't charge at all. Battery says (not charging) but running on AC power. The Magsafe light is not lit. The Magsafe port was replaced on the computer, but that didn't fix it.
Trying to avoid having to reformat and send into Apple (change it back to stock config).
Anyone have a solution?

The battery can't be charged when the cpu is under full load because in that situation it is using power from the battery. Shut the MBP down (not sleep) to see if it will charge in that mode.

MacBook pro battery not charging anymore, Replace Now, Unibody 2011

Hi everyone
I have a MacBook pro unibody from 2011 (usually used on power but sometimes dischared) and suddenly my battery is indicating "not charging" (is constantly to 0%) and I have the following diagnostic (in the about my mac).
If I remove the plug, the Macbook shutdowns immediately, I cannot connect it to any wifi network, and the date & clock are reset if I unplug it.
I tried the SMC reset and event the reset the NVRAM (PRAM on intels) (I am not sure about the SMC reset as there is no evident signs it has worked...).
My battery only has 120 charge cycles... and my warranty is of course finished. I have read on some forums that I maybe have to "unplug the battery" manually ? And changing the so few used battery seem to be too expensive...
Does anybody has an idea ?
Thanks for your help
Hardware Overview:
Model Name:                       MacBook Pro
Model Identifier:                   MacBookPro8,1
Processor Name:                 Intel Core i5
Processor Speed:                2.3 GHz
Number of Processors:        1
Total Number of Cores:       2
L2 Cache (per Core):           256 KB
L3 Cache:                             3 MB
Memory:                               8 GB
Boot ROM Version:              MBP81.0047.B27
SMC Version (system):       1.68f99
Battery Information:
Model Information:
Serial Number:             W0********BA
Manufacturer:              SMP
Device Name:              bq20z451
Pack Lot Code:            0000
PCB Lot Code:             0000
Firmware Version:       0201
Hardware Revision:     000a
Cell Revision:               0158
Charge Information:
Charge Remaining (mAh):          0
Fully Charged:                             No
Charging:                                     No
Full Charge Capacity (mAh):      0
Health Information:
Cycle Count:    120
Condition:         Replace Now
Battery Installed:            Yes
Amperage (mA):            0
Voltage (mV):                9696
System Power Settings:
AC Power:
System Sleep Timer (Minutes):      30
Disk Sleep Timer (Minutes):            0
Display Sleep Timer (Minutes):       15
Wake on AC Change:                     No
Wake on Clamshell Open:              Yes
Wake on LAN:                                 No
Current Power Source:                   Yes
Display Sleep Uses Dim:                 Yes
Battery Power:
System Sleep Timer (Minutes):      10
Disk Sleep Timer (Minutes):            10
Display Sleep Timer (Minutes):       5
Wake on AC Change:                     No
Wake on Clamshell Open:              Yes
Display Sleep Uses Dim:                 Yes
Reduce Brightness:                         Yes
Hardware Configuration:
UPS Installed:    No
AC Charger Information:
Connected:           Yes
ID:                         0x0100
Wattage (W):        60
Revision:              0x0000
Family:                 0x00ba
Serial Number:     0********e
Charging:              No
<Personal Information Edited by Host>

LowLuster, greetings:
LowLuster wrote:
Whether you had the Applecare extended warranty or not it would not cover the battery on a 2011 model. Apple considers the battery to be a consumable item that will fail eventually. Because of that after the first year of ownership Apple does not replace the battery for free, in warranty or not.
That is not necessarily the case. I had a battery replaced free of charge well after one year of use. There is latitude exercised by Apple in determining if and when a battery should be replaced for free. I suggest that there is a strong argument in the case of one with 120 cycles. As is the case with any part, some that are produced are defective and fail prematurely, whether it is a battery, HDD, RAM chip etc.
Ciao.

Macbook Pro battery not charging after getting new charger

Dog ate through my Macbook pro's charger, so I went to the apple store and bought a new charger. The big one, that states it is for Macbook Pros. 85w, I think?
Anyway. The Pro runs on the charger, but its battery is not charging.
I suppose it is possible the battery just up and died, but that would be a heck of a coincidence that it happened the moment I got a new adapter.
Do all adapters labelled for macbook pros charge all macbook pro batteries?

I had recently the same issue : my battery didn't want to charge anymore. I bought a new charger. Same problem. The battery didn't want to charge (a message near the battery icon at top right of the screen : "battery is not charging").
I tried the SMC thing. Ever the same problem.
I checked I got the latest firmware for my MacBook Pro Unibody mid-2009 (with the non-removable battery). I got it.
My battery was less than 2 years old and got only 138 cycles.
And the green light on the charger was not so shining as usual.
Before going to an Apple Store, I just tried to clean my MacBook Pro power connecter.
And... It works !
The Power connector was just dirty.
Now my battery is charging again.

Sony Vegas Pro 13 with the MSI GT70 Dominator Pro

Heres a quick youtube video showing the usage and temps of my GT70. Using Sony Vegas Pro 13, with cuda acceleration selected and rendering in H.2 codec/format.
http://youtu.be/kQ3ohbaISCo?list=PLrHpZXNdb69ouOXTELToXKxdzXWJPAhWj
I will be doing full review, and I have hundreds of Screen shots of every benchmark done by my Asus G750 JM, JS, JZ, and finaly my MSI GT70. I will be putting together a slide show video with a nice comparison between all these notebooks.

Welcome to the MSI club buddy! ....there have been quite a number or threads about inconsistent/low frame rates. I too own an MSI GT60 with GTX870M and seeing inconsistent frame rates. Hope some vbios update fixes this

MacBook Pro battery not charging - green light 0%

Any advice? Battery is not charging and is at 0%. Green light is on and it shows a plug icon at the top.
Here are my details:
Battery Information:
Model Information:
Serial Number:          W00295E1QD3BA
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          201
Hardware Revision:          000a
Cell Revision:          158
Charge Information:
Charge Remaining (mAh):          0
Fully Charged:          No
Charging:          No
Full Charge Capacity (mAh):          5552
Health Information:
Cycle Count:          85
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          8565
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          10
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
PrioritizeNetworkReachabilityOverSleep:          0
Battery Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          2
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0100
Wattage (W):          60
Revision:          0x0000
Family:          0x0085
Serial Number:          0x0089741d
Charging:          No
Thanks!

Hi Ralph, thank you for responding.. I used to see those information like, condition, cycle count, etc before, but now its not showing up probably the battery is not detected. Any ideas? Thanks again..

Macbook pro battery not charging

my mac is no that old 1 1/2 years i used part of the battery after that when i plugged it in the light on the plug stayed at a dull green not a orange or bright green the battery isnt charging this has happend before usally i leave it over night off and its charged by morning system profiler says
Model Information:
Serial Number:          9G0190GDRD3MA
Manufacturer:          DP
Device name:          bq20z451
Pack Lot Code:          0000
PCB Lot Code:          0000
Firmware Version:          0201
Hardware Revision:          0002
Cell Revision:          0158
Charge Information:
Charge remaining (mAh):          4033
Fully charged:          No
Charging:          No
Full charge capacity (mAh):          5320
Health Information:
Cycle count:          134
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          11953
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          0
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          60
Wake On AC Change:          No
Wake On Clamshell Open:          Yes
Wake On LAN:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
Battery Power:
System Sleep Timer (Minutes):          45
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          15
Wake On AC Change:          No
Wake On Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0000
Wattage (W):          0
Revision:          0x0000
Family:          0x0000
Serial Number:          0x00000000
Charging:          No
I NEED HELP QUICK DO I NEED A NEW BATTERY OR CABLE COULD IT BE A PROBLEM WITH MY MAC ???/

Unplug your AC adapter from its wall socket for one minute, then plug it back in. Any change? If not, reset your computer's SMC:
http://support.apple.com/kb/HT3964
If that doesn't jump-start it either, see this article:
http://support.apple.com/kb/TS1713
Try a different AC adapter if you have access to one. If you don't, visit an Apple Store and test with one there.

Macbook pro battery not charging since lion upgrade

I have a Macbook pro 13'' (2010 Mid) and my battery doesn't charge since last night. I installed Lion 3 days ago, and the battery was charging correctly, but since last night it doesn't charge anymore.
At first, I thought it could be the magsafe problem, but after a few hours the battery started recharging again.
Any idea?

You're lucky, my friend, because at least you can use your MBP corded.
Mine doesn't work even with MagSafe plugged. I have an almost dead MB with less than 30% battery... it's like "the final countdown" ...
What the h... is Apple waiting for to release any solution or at least talk about this officially ?
Grrr...
This didn't happen to me since I bought my first iBook G3 computer and its Sony optical drive was working poorly for months !! Finally, Apple "decided" to release a new firmware, just when I had bought an external recorder...
This issue also stinks...

Mac Book Pro Battery Not Charging

I have a 2.2 Ghz 17' MBP running snow leopard. My battery is refusing to charge. While on standby power the battery seems to charge to 100%. but when in use appears to discharge quickly even with the mag safe attached. Mag safe lights show green then orange as the battery discharges and the battery icon shows the mains connector and the words (not charging) next to it. The icon rollover shows "Battery is not charging. Power Source : Power adapter". The battery info in profiler is below.
Battery Information:
Model Information:
Manufacturer: Sony
Pack Lot Code: 0001
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0303
Charge Information:
Charge remaining (mAh): 4197
Fully charged: No
Charging: No
Full charge capacity (mAh): 4655
Health Information:
Cycle count: 135
Condition: Normal
Battery Installed: Yes
Amperage (mA): -4028
Voltage (mV): 11345
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 180
Automatic Restart On Power Loss: Yes
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 5
Wake On AC Change: No
Wake On Clamshell Open: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: No
Charging: No

You might want to try resetting the SMC:
http://support.apple.com/kb/HT1411?viewlocale=en_US
Good luck!

MSI GT70 Dominator Pro - overheating problems

Hi all! I'm very interested in buying that notebook, but i've heard a lot about msi's overheating problems and it worries me. I am aware that gtx 880m requires a lot of cooling and i would like to know if those infamous overheating problems have been fixed ? i don't want to spend so much money on something that works for a month.... I play a lot and i am very demanding in this case, so i predict i'd be playing 4-5h/day on max settings. Will i have problems ? what to do to avoid it ?

You know what? I already buy it in china. and it's really high temperature .
For example. I play Call of duty 10, and no matter I open the full effect or normal effect , the temperature always can be 93C . I see the Weather temperature is only 20. and If I'm play Batman:Original full effect same problem, the 880m temperature is going to 90+ .I'm use normal effect and close the Physical , then the temperature on 82-85....
I'm very confuse, If the 880m very high temperature .... why use it on laptop.... because if always a high temperature, you really not good feeling to play anything, because high temperature will let you laptop retired more fast.
Any way I also buy a cooling pad, but looks like not any working....maybe that about the laptop inside design....
well, I search on Internet about GT70 design, and I think maybe the original thermal paste not good. So I buy IC Diamond 7 Carat ICD7 ,but I'm not use it yet. because the MSI chinese customer service tell me if you change it or reload it , They do not offer the warranty........looks like a joke......then what now.....? I don't know , some friend told me , it's fine to change the thermal paste, but I still warry, and I'm not continue play the game anymore....because every time the temperature on 90C. I don't any desire to play.
GT70 only 1 Fan for Radiating, not 2 like ROG or Alien, maybe that is a dead design.......
So, these all true story, and if any one has any idea or any advice, please tell me . thanks.
any way I just search the GT70 temperature problem and I in here join every one, so sorry for my bad English.

Macbook Pro battery not charging suddenly

Hi,
This morning, I was using my computer, no problem. And then I plug it in and start writing a paper. Then I saw the battery indicator as green so I pulled it out and the computer shut down. When I turned it back on I realized that it was running on charger. It said that battery condition "Replace Soon." Then I turned it off again, reset the SMC and I saw an X on battery icon, saying no battery is there. I restarted it again and now it saysreplace soon again.
What is causing this? Do I have to get the battery replaced and pay or is it apple's fault since the battery died in like 2 hours? It was fine this morning, used it on battery power for almost 3 hours.
Any suggestions??
Battery Information:
Model Information:
Serial Number:    W003167AJD3LA
Manufacturer:    SMP
Device name:    bq20z451
Pack Lot Code:    0000
PCB Lot Code:    0000
Firmware Version:    0201
Hardware Revision:    000a
Cell Revision:    0165
Charge Information:
Charge remaining (mAh):    0
Fully charged:    Yes
Charging:    No
Full charge capacity (mAh):    0
Health Information:
Cycle count:    1050
Condition:    Replace Now
Battery Installed:    Yes
Amperage (mA):    0
Voltage (mV):    12462
System Power Settings:
AC Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    10
Wake On AC Change:    No
Wake On Clamshell Open:    Yes
Wake On LAN:    Yes
Current Power Source:    Yes
Display Sleep Uses Dim:    Yes
Battery Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    2
Wake On AC Change:    No
Wake On Clamshell Open:    Yes
Display Sleep Uses Dim:    Yes
Reduce Brightness:    Yes
Hardware Configuration:
UPS Installed:    No
AC Charger Information:
Connected:    Yes
ID:    0x0100
Wattage (W):    60
Revision:    0x0000
Family:    0x0085
Serial Number:    0x00d5c41e
Charging:    No
Hardware Overview:
Model Name:    MacBook Pro
Model Identifier:    MacBookPro7,1
Processor Name:    Intel Core 2 Duo
Processor Speed:    2.4 GHz
Number Of Processors:    1
Total Number Of Cores:    2
L2 Cache:    3 MB
Memory:    4 GB
Bus Speed:    1.07 GHz
Boot ROM Version:    MBP71.0039.B0B
SMC Version (system):    1.62f6
Serial Number (system):    WQ033C5ZATM
Hardware UUID:    87253AF0-DD52-5622-B2BD-2F817B30AF64
Sudden Motion Sensor:
State:    Enabled

I keep my MBP connected to the power adapter if I have an outlet available. My 2010 MBP has about 80 cycles on it. I will about once per month use the MBP on internal power to about 50% discharge.
Look at these support articles:
http://www.apple.com/batteries/notebooks.html
http://www.apple.com/batteries/
Ciao.

Msi gt70 dominator pro, battery not charging..

Similar Messages

Maybe you are looking for