MSI GT70 Secondary Drive/750gb not detected while SSD in Raid !!

Long story short , my system crashed randomly for the first time ever (I left the room came back and the system had crashed) , then I got the raid boot failure message for the first time ever !
It was a perfectly clean system practically unused system.
I got the laptop with Windows 7 Home Premium.. this just before the Win 8 systems came out..
I deleted Raid Volume and then created a Raid Volume..
Installed Windows 8 , all this while Bios set to Raid !
I noticed my 750Gb drive was no longer visible in Windows.. i installed all the drivers i could think of but still my secondary HDD wasn't being detected in device manager..
Intel Rapid Storage Technology detected 699GB in Storage System View , while device manager didnt..
When i set Bios to either ACHI or IDE , Bios then reads the 750GB drive in boot priority list but then Windows fails to boot from my SSD's set to Raid !
When I set bios to RAID it only reads SSD , not the 750GB drive.. 
So basically when I set my Bios to raid my secondary 750gb drive disappears from the boot priority list + from Windows !
When I set to achi/IDE my raid disappears.
I want to keep my raid and have my 750gb drive !
How i dont know...
If i disable raid , only a single SSD drive is detected that leaves me with half the space.. so i cant even make do without Raid because ill lose half that space..
Another thing worth noting is that my Bios boot screen/time has increased noticeably compared to how things were originally. feeling sluggish !
Sorry for putting things in such a messy way..
Thanks for your input and help in advace !!!

thanks for updating me on that..
But to my luck , i had nearly been using the system for 2 days now..
Installed everything , played a few movies etc..
Then my system froze..
I had to force shut it down..
Now im getting the Raid boot failure status all over again..
So i went and reconnected the SSD's but the problems still the same..
I cant go delete my entire raid because what if this happens again..
I'm stuck in this non sense of a loop.. most disappointed , i spent so much money on this machine and i haven't once enjoyed it like i was supposed to..
Is it the raid card , is it the ssd , is it the raid software or is it something else.. :(
Why is my system doing this.. beyond disappointed all my efforts have gone to waste..

Similar Messages

  • Hard drives do not detect after enabling hardware raid controller

    hello every one
    I have 2 hard drive and want to make them RAID 1.after enabling raid controller in bios,when I want to install windows server 2012,it says no hard drive detected.when I load driver of raid,it dont work.i used "list disk" and "diskpart"
    command in command prompt to show my online disk drive,but it does not show any hard drive.I think hard drive are in offline mode.how can I enable them?hard drive are sata 1T.
    atiye moghaddam

    Hi,
    As RAID is enabled on motherboard, the configuration should be finished in BIOS as well. So the RAID1 should be already configged before installing Windows system.
    When boot with an installation CD, you should have an option like "load driver for hard disk" or so. RAID will not be directly recognized so you should use that option to install a driver first.
    If it will not work, contact motherboard manufacturer for more support on this function. 
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • HP x720w 64GB Pen Driver Does not detect on Windows 7 Laptop

    HP x720w 64GB Pen Driver Does not detect on Windows 7 Laptop. While it detects on my PC. Same OS. Pls advise.

    I will have to wait until a Moderator inspects your image and makes it viewable.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HP PAVILION G6-2229TU LAPTOP HDD NOT DETECT WHILE OS INSTALLATION

    Sir
    I have hp pavilion g6-2229tu laptop, i am formate and reinstll operating system win7 but hdd not detected while installation select the driver to be installed page are come not showing hdd how to install os, pls help us

    Restart windows setup and see if your problem was solved
    If your problem doesn't solve after restarting your pc then on the select drive to install windows page press
    Shift key + f10       then now Command promopt was opened then type "Diskpart"  Now new window was open then type "List disk" 
    Now If there you will see your Hard disk drive then try the following
    type "select disk 0"  (0 is your disk number replace 0 with your disk number as shown in window)
    now type "clean" Please note Clean command was format your  hard disk completely with recovery drive Now type "convert to MBR"
    now try to install windows again and see your problem was solved
    Enjoy

  • Connected usb driver is not detected in window 8.1

    hey .....
     HP 250 G3 notebook
    connected usb driver is not detected in window 8.1 after update BIOS software ....my current BIOS software version  F.22 .... so plsss...fix this problem......

    @jeet2113 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • My hp v210(4gb) pen drive is not detected in my pc but it show its properties in my pc

    my hp pen drive was not detected in my pc . my os window 7 64 bit but it show properties of the pendrive

    Hello commandcomitra,
    Take a look at the support Getting Help Guide manual which provides details on support for this product.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Problem with creating Connection pool and JNDI, driver is not detected

    Hi,
    I have an issue with creating Connection Pool and JNDI.
    I'm using:
    - JDK 1.6
    - OS: Linux(ubuntu 8.10)
    - Netbeans IDE 6.5.1
    - Java EE 5.0
    - Apache Tomcat 6.0.18 Its lib directory contains all necessary jar files for Oracle database driver
    - Oracle 11g Enterprise
    My problem is that the Oracle database driver is not detected when I want to create a pool (it works pretty well and is detected without any problem when I create ordinary connection by DriverManager)
    Therefore after running:
    InitialContext ic = new InitialContext();
    Context context = (Context)ic.lookup("java:comp/env");
    DataSource dataSource = (DataSource)context.lookup("jdbc/oracle11g");
    Connection connection = dataSource.getConnection();and right after dataSource.getConnection() I have the following exception:
    org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot load JDBC driver class 'oracle.jdbc.OracleDriver'
    at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1136)
    at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:880)
    at servlets.Servlet1.doPost(Servlet1.java:47)
    at servlets.Servlet1.doGet(Servlet1.java:29)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
    at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845)
    at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
    at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
    at java.lang.Thread.run(Thread.java:619)
    Caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
    at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at sun.misc.Launcher$ExtClassLoader.findClass(Launcher.java:229)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:169)
    at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1130)
    ... 17 more
    My application context file (context.xml) is:
    <?xml version="1.0" encoding="UTF-8"?>
    <Context path="/WebApplication3">
      <Resource auth="Container"
                      driverClassName="oracle.jdbc.OracleDriver"
                      maxActive="8"
                      maxIdle="4"
                      name="jdbc/oracle11g"
                      username="scott"
                      password="tiger"
                      type="javax.sql.DataSource"
                      url="jdbc:oracle:thin:@localhost:1521:database01" />
    </Context>and my web.xml is:
        <resource-ref>
            <description>Oracle Datasource example</description>
            <res-ref-name>jdbc/oracle11g</res-ref-name>
            <res-type>javax.sql.DataSource</res-type>
            <res-auth>Container</res-auth>
        </resource-ref>
    ...I found similar threads in different forums including sun, such as
    http://forums.sun.com/thread.jspa?threadID=567630&start=0&tstart=0
    http://forums.sun.com/thread.jspa?threadID=639243&tstart=0
    http://forums.sun.com/thread.jspa?threadID=5312178&tstart=0
    , but no solution.
    As many suggest, I also tried to put context directly in the server.xml (instead of my application context) and referencing it by <ResourceLink /> inside my application context but it didn't work and instead it gave me the following message:
    org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot create JDBC driver of class '   ' for connect URL 'null'
    Has anyone succeeded in creating a connection pool with JNDI by using Tomcat 6 or higher ? If yes, could kindly explain about the applied method.
    Regards,

    Hello again,
    Finally I managed to run my application also with Tomcat 6.0.18. There was only two lines that had to be modified
    in the context.xml file (the context of my application project and not server's)
    Instead of writing
    <Context antiJARLocking="true" path="/WebApplication2">
        type="javax.sql.DataSource"
        factory="org.apache.tomcat.dbcp.dbcp.BasicDataSourceFactory"
    </Context>we had to write:
    <Context antiJARLocking="true" path="/WebApplication2">
        type="oracle.jdbc.pool.OracleDataSource"
        factory="oracle.jdbc.pool.OracleDataSourceFactory"
    </Context>- No modification was needed to be done at server level (niether server.xml nor server context.xml)
    - I just added the ojdbc6.jar in $CATALINA_HOME/lib (I didn't even need to add it in WEB-INF/lib of my project)
    - The servlet used to do the test was the same that I presented in my precedent post.
    For those who have encountered my problem and are interested in the format of the web.xml and context.xml
    with Tomcat 6.0, you can find them below:
    Oracle server: Oracle 11g Enterprise
    Tomcat server version: 6.0.18
    Oracle driver: ojdbc.jar
    IDE: Netbeans 6.5.1
    The context.xml file of the web application
    <?xml version="1.0" encoding="UTF-8"?>
    <Context antiJARLocking="true" path="/WebApplication2">
        <Resource name="jdbc/oracle11g"
                  type="oracle.jdbc.pool.OracleDataSource"
                  factory="oracle.jdbc.pool.OracleDataSourceFactory"
                  url="jdbc:oracle:thin:@localhost:1521:database01"
                  driverClassName="oracle.jdbc.OracleDriver"
                  userName="scott"
                  password="tiger"
                  auth="Container"
                  maxActive="100"
                  maxIdle="30"
                  maxWait="10000"
                  logAbandoned="true"
                  removeAbandoned="true"
                  removeAbandonedTimeout="60" />
    </Context>The web.xml of my web application
    <?xml version="1.0" encoding="UTF-8"?>
    <web-app version="2.5" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd">
        <resource-ref>
            <description>Oracle Database 11g DataSource</description>
            <res-type>oracle.jdbc.pool.OracleDataSource</res-type>
            <res-auth>Container</res-auth>
            <res-ref-name>jdbc/oracle11g</res-ref-name>
        </resource-ref>
        <servlet>
            <servlet-name>Servlet1</servlet-name>
            <servlet-class>servlets.Servlet1</servlet-class>
        </servlet>
        <servlet-mapping>
            <servlet-name>Servlet1</servlet-name>
            <url-pattern>/Servlet1</url-pattern>
        </servlet-mapping>
        <session-config>
            <session-timeout>
                30
            </session-timeout>
        </session-config>
        <welcome-file-list>
            <welcome-file>index.jsp</welcome-file>
        </welcome-file-list>
    </web-app>Ok, now I'm happy as the original problem is completely solved
    Regards

  • What should i do if my external hard drive is not detected by my mac

    what should i do if my external hard drive is not detected by my mac?
    need to have the files saved on it and be able to backup via time machine

    Hi:
    Here are some of the options I've read about on here that may or may not work:
    1. Reset the NVRAM as it may need to be reset to recognize the drive. See below:
    http://support.apple.com/kb/ht1379
    2. If the drive is a USB drive, put a USB hub between the drive and the unit. As ridiculous as that may sound in some cases it works.
    3. If you have some types of hardware problems and want to test them this works:
    http://scsc-online.com/Scannerz.html
    That's a test tool only. It isn't going to fix anything just diagnose a bunch of possible hardware problems and it costs money, too.
    What format is the drive in? Is it a Mac native format like HFS or is it some other format, like NTFS or FAT?

  • My flash drive is not detecting in boot menu of hp j110tx

    when i m trying install windows 8.1 from usb ,my usb drive is not detecting in my laptop envy j110tx  boot menu .
    But the same pendrive is detecting  in my another pc and it contains bootable file and it is lodable too
    I searched everywhere but i got nothing  ,so please help me
    This question was solved.
    View Solution.

    Hi:
    Have you created Windows 8 or 8.1 Installation USB Flash Drive with UEFI?
    http://www.eightforums.com/tutorials/2328-uefi-unified-extensible-firmware-interface-install-windows...
    http://www.eightforums.com/tutorials/15458-uefi-bootable-usb-flash-drive-create-windows.html
    Regards
    Visruth
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • T60 - thinkpad ultranav driver is not detected

    Hello,
    From the following link I downloaded and installed the "UltraNav Utility for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP (32-bit, 64-bit) - ThinkPad "
    http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t60...
    My O.S is Windows XP-32
    Upon installation completion I was asked to restart the Laptop.
    But upon windows boot, the mouse pad is not working. Only the red mouse is working .
    I tried <Fn+F8>. It did not make a difference .
    From this link I also installed: UltraNav Wizard for Windows 2000/XP".
    When I ran the wizard I got the message:
    thinkpad ultranav driver is not detected
    In the device manager, under "Mice and other pointing devices", there is only PS/2 mouse.
    Can you help ?
    Thank you in advance,
    Z.V

    @jeet2113 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • HP pen drive v165w not detected in windows 7

    HP pen drive v165w not detected in windows 7 after using for 4 months. plsee help

    How old is the desktop? Versions of Windows XP before SP2 did not recognize usb mass storage devices such as the pen drive. Also, do the usb ports generally work? Have you tried all the usb ports on the desktop?

  • HP pen drive v165w not detected in windows XP

    HP pen drive v165w not detected in windows XP, please help

    How old is the desktop? Versions of Windows XP before SP2 did not recognize usb mass storage devices such as the pen drive. Also, do the usb ports generally work? Have you tried all the usb ports on the desktop?

  • 160gb SATA not detected while 80gb SATA is working fine

    I have a MSI K8MM-V board with AMD 2800+, I am alredy using a 80gb SATA1 drive, I recently purchased a 160gb SATA1 (seagate) however, to my surprise the disk is not being detected in the BIOS and even when I suply the drivers during windows xp installation, the system is not able to detect any hard disk attached, can somebody please suggest me what to do now, is my board in-compatible with disks with such high capacity
    system spec:
    AMD 2800+
    VIA K8MM-V
    512 RAM
    80gb SATA(working)
    160gb SATA(not detected)

    Quote from: Tiresmoke on 03-June-06, 04:14:52
    Surv1v0r don't be so hasty next time to RMA. Many times it is something simple like this that gets the job done.
    Fair comment - sorry, you guys were right and I was wrong - no excuses.
    jatin_bhasin - from Wikipedia :
       SNAFU - Situation Normal: All F***ed Up
       FUBAR - F***ed Up Beyond All Recognition/Repair/Reason/Redemption
    Quote from: mrbadnback
    I have read on WD website and on the website where I bought my WD HD and they had lots of people return the HD's just because they didn't know about the jumpers.
    You do wonder whethere WD (and others) will learn anything from this.  RMAs can't help anyone, perhaps a little guidance on the casing or an installation sheet would help to resolve some of these ?
    Once again - sorry 

  • A secondary battery was not detected, but your system supports a second battery.

    Hi,
    I have read this while testing my battery with HP tools dignostics:
    Secondary Battery: a battery was not detected, but your system supports a second battery. You may want to purchase a second battery to extend your battery life between charges
    What is meant with your system supports a second battery?
    I think this 'your system supports a second battery' should have been said if my computer supported  two batteries insereted  simulataneously.
    However, if this 'your system supports a second battery.' only means if the first battery got to its critical level, then I could shut down my computer, and then replace it with the second one which is fully charged. 
    As a result, I would be saying that my system supports a second battery, a third, fourth, fifth, and so on.  I don't need to say my system supports a second battery. 

    Thanks a lot,
    Then, for my laptop which only supports to insert on battery at the same time.  Then as long as the secondray battery will not be inserted along with the primary battery at the same time, then my system and my computer don't support secondary battery. However, they support only one battery inserted. As a result,   They wouldn't have said(written) a tip says during the battery testing   'secondary battery was not deteced, but your system supports a second battery.'
    that they should have written system supports a second battery, a third, fourth, fifth, and so on which can be inserted instead of your inserted empty primary battery.
    I really don't find any a docking station port on the bottom of my laptop. Do you think that there are some HP models can support two batteries to be inserted at the same time?

  • My external hard drive is not detected through my Thunderbolt port. How can I fix this?

    I just purchard a Seagate GoFlex Portable Adapter for Thunderbolt. I have an internal drive from an old computer that I wanted to access information on. My hard disk is not detected on the disk utility nor can i hear the hard drive  turn on and "hum" eventhough the adapter is connected.
    Thanks for any help provided.
    Items:
    Seagate GoFlex Mac Portable Adapter for Thunderbolt and Thunderbolt Cable
    http://www.seagate.com/external-hard-drives/portable-hard-drives/performance/gof lex-for-mac-thunderbolt/
    Seagate 200GB Internal Hard drive

    Here you go
    Intel-based Macs: Resetting the System Management Controller (SMC)

Maybe you are looking for