Msi gt70 with some issues and questions answer asap thanks

my first issue is my ssd it is just too small how do I increase it probably a step by step link to where I can purchase and learn how to install it second of all I really need my msi burn recovery so my f3 does not work anymore, I have my drivers cd but that doesn't have it, the next issue is softwares I use when the render the use my ssd and that makes them seriously slow the need more memory space I wish I could make them use the bigger harddrive at least for the main time till I get a new one, my soft keys work except eject and wireless off all others work

Wow.....
Well, first off, try and use some periods here and there. Or a list. Something to atleast break things up in a coherent manner.
So, you want a guide on how to install another SSD. That's a pretty complex matter, judging by what I can get out of your post, your technical prowess may not be where it needs to be in order to do that.
Also, without knowing what you currently have, other than it is a GT70, it really makes it difficult to tell you what to get.
As far as your software, I'm sorry, but there really isn't any way to help you since you seem to have not made the recovery disks like you were supposed to. I would contact MSI for more information on how to proceed at this point.
After we get the above sorted, we can work on your other questions.

Similar Messages

  • Some issues and questions about StorE TV

    Hi there! I bought stor.e tv a week ago and there are number of issues, in order of personal importance:
    1. It slows down audio playback. It happens when playing standard mp.3s on my home stereo through the analogue outlet - my music sounds bizarre, slowed-down and with lowered frequency. I have to go back change, settings to HDMI output (normal speed play, no problem), then change again to analog, scroll through the folders to find the song I want to play and play it again - voila, it works normally. Quite a complex way to play a song properly, don't you think?!
    2. When there are ID tags (especially album art) to the songs it takes ages to shift from one song to the next.
    3. Audio settings are often forgotten after the unit has been shut down normally from the remote control only - you switch it on again and it's not how I left it but back to HDMI. So, I have to remember any time checking the settings before playing a song?! Even though, in a crooked way, that^s helpful having in mind problem 1.
    4. Does not display correctly Cyrillic subtitles.
    5. Heats quite a lot.
    There are other things too (no playlists, slow, lagging, etc). I am actually writing that just before going back to the shop and ask for my money back.
    Cheers, guys!

    Hi
    > 4. Does not display correctly Cyrillic subtitles.
    Yes, this was mentioned in other threads seems that not all subtitles are supported.
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=51945
    Regarding the other issues;
    I think you should try to reset the E Store TV to default again and should check how it works.
    In many cases this helps to solve such annoying issues.
    Greets

  • Some problems and questions

    I have some problems and questions about my MSI MEGA PC 180 system...
    One problem is that MSI live monitor only works one time after every new installation then is just say "The URL is invalid" every other time I try to search for updates.
    One problem is that one of the fans  doesn't turn off when I turn of the computer and the only way to get i to turn off is to turn on the hifi mode and turn it off then the fan stops. And some times the fan can start after a while when the computer has been turned off.
    There are two fans for the cooling of the CPU but PCALERT only shows the speed of one of them.. why? according to the manual one of the is called CPU fan and the other one is called sysfan but only CPU fan showes i PCALERT.
    Are there no other way to control the Tv other than with the Home Teather system than I find way to slow if you use 1280x1024 resolution on the screen like I do. And are there no way to sort and remove channels in home teather? As i is now I can't move the channels in the order I want and I can't remover channels that the auto search thaught was channels but aren't?
    An other thing that I find annoying is that the fullscreen mode of home teather doens't cover all off the screen it doesn't hide the systray and leaves a small but annoying kolumn to the right that showes the backgrund and that is very annoying to watch tv if you have a light backgrund because the kolumn are so bright.

    Welcome Kabbo,
    I see you agree that MC III is far from perfect. Perhaps you can try the combination of Media Portal and Ir2Key. Just read some of the other posts including "WinIRX.ocx internals/usage" by ddookie.  Another possibility is to try Dscaler, but this program is only for watching TV.
    Regarding the processor fans: its normal that only one of the two shows up in PcAlert; when you look closely to both fans you'll see that one has only a two-wired connection.
    The problem of a fan not shutting down is new to me, I suppose you have checked the connections to your mobo?
    Greetz,
    JaDi

  • 8.3.1 SVM DR - issues and questions

    Hi everybody, I know that the SVM DR feature is just our with 8.3.1 RC1 but we need to test it in advance because one of our customer we're transitioning to cDOT from a consolidate and 10 years of 7Mode history! A very smart customer deeply customizing solutions, a pioneer in WFA and SnapCreator features and so on! We've tested the SVM DR feature and it roughly do what is declared on doc. But... We’re still experiencing a lot of issues related to porting what they have now to what they exptect to have... As reported it seems that it does the work that someone could expect as…basic way. But at this customer the world is a little bit more complicated (does it is the only one using that DR way with 7Mode? I don’t think so!) We need to understand how to proceed to set up this DR. Or we (better NetApp!) must officially communicate to customers that they can wast their –perfectly working for test and troubles- DR approach for it’s not possible in cDOT! Let me resume the issue.This customer, since years, doesn’t use the vFiler DR direct approach but, at the snapmirrored destination flexclone volumes are created and on this run vfiler with –d option that start from the root volume of the vfiler. I.e. (the ✓ stands for running, the X  for stopped/offlined/mirrored)    ✓                   ✓             X                                                               ✓                                                         ✓     Production        ----sm--->          DR         ---flexclone--->                DR_clone            –vfilercreate  -->              vfiler in dr This permit to have a point in time instance with all the initial configurations (share/exports/MSAD domain join, users, security ecc).This also let have the choice to choose the snapshot used as starting point and, overall, this let to maintain the source-destination replicas active and updated. All of those is automated using WFA, so it’s enough a click and everything go! We’ve seen that SVM DR more ore less work as vfiler dr worked.   ✓                   ✓             XProduction        ----sm--->          DR       < break of mirror relationship – a MUST >          X                             X                    ✓Production        ----sm--->          DR We’ve also seen with some trick and maintaining the production and test network separated in different IP spaces (and ports, switches, vlan…) that we can have both running the source and the destination, but we must also break the sm relationship!          ✓                           X                    ✓Production        ----sm--->          DR These releationships unfortunately are essential prerequisites for this customer. Let me say vols (in SVMs) must continue to replicate for the DR test SVM could be up also for 10 and more days! And customer cannot permit the risk to loose its replicated/updated copies…  The questions are: is there something like vfiler create –d? (documentation does not report anything else than “normal” usage)Something that let us create an SVM with all configurations inside but starting from cloned vols  at destination snapmirrored site? We’re really in trouble for customer is starting to suspect that this cDot could be a boomerang and, except for VSAN and VVOL support for VMware 6, the things they’ve loosed are more than the one they’ve gained! Any help will be appreciated!   

    We have been part of the beta program for SVM-DR for a while and are now still testing it in RC1. We are huge vfiler-dr shop. If you have any need to flexclone off the DR, then svm-dr will NOT work for you since you cannot flexclone off an SVM-DR.  We aren't even considering SVM-DR because identity discard/preserve methods just don't fit the bill.  

  • Some problems and questions using OWB

    For Igor or anyone who can help me :-)
    Hello Igor,
    Thanks for all your help concerning my mapping deployment problem! Now it’s working better ;-)
    I used the OWB Runtime Assistant to create a new runtime target schema and i use the owner of this schema as user while logging to OWB.
    Now i can create and deploy without problems mappings, tables, functions, procedures, packages, dimensions, views, materialized views, process flows (i have installed the Oracle Workflow Client 2.6.2.0.0 with OWF builder and OWF mailer ).
    However I have still some problems and questions :-)
    a) After deploying a mapping or process flow i can execute them from OWB Deployment Manager. How can i schedule the execution of a deployed precess without using OWBDM ? (I want to execute a process every day to perform ETL).
    b) I think i have a problem deploying cubes. I create a cube in OWB, the validation is OK, the deploment succeds, but if i look with OEMC in the tree in the Warehouse OLAP section no cube is created. Only the fact tabe is created. If i look to the scripts from the Pre Deployment generation results i found DDLs only for TABLE, INDEX, UNIQUE KEY, FOREIGN KEY and ANALYZE object types, meanwhile during a dimension deployment i found also a DDL for the DIMENSION type object. WHY ?
    c) If I look in the procedures of the new created OWB Runtime Target Schema I found 3 procedures which are in error and when I try to compile them I receive the following error messages :
    - procedure WB_OLAP_LOAD_CUBE
    PLS-00201: identifier 'DBMS_AWM.CREATE_AWCUBELOAD_SPEC' must be declared
    - procedure WB_OLAP_LOAD_DIMENSION
    PLS-00201: identifier 'DBMS_AWM.CREATE_AWDIMLOAD_SPEC' must be declared
    - procedure WB_OLAP_LOAD_DIMENSION_GENUK
    PLS-00201: identifier 'DBMS_AWM.CREATE_AWDIMLOAD_SPEC' must be declared
    How can solve this problem? Is there any link with the fact that the cube is not generated?
    d) When I first acces the deployed DIM in the OEMC tree I receive a message saying that the dimension does not have complete metadata as needed for use by Oracle OLAP services (because is created either in an earlier version of Oracle database or it was created by an an other application than OEMC) and OEMC automatically generates the default needed metadata. Is this normal ?
    I work in an environment with
    - Oracle 9i Database 9.2.0.1.0
    - Oracle 9i Client 9.2.0.1.0
    - Oracle 9i Warehouse Builder Products 9.2.0.2.8
    Best Regards:
    Vlad
    PS Sorry for my poor English ;-)

    Answered in your "Getting RPE-01008 when deploying mappings" post.
    Regards:
    Igor

  • PDF prints with little boxes and question marks

    I prepared a document in Microsoft Publisher 360 and created a pdf with creative cloud.
    Looks great and prints great for me.
    I emailed it to a few people and it looks great on their screens. However, when they print it,
    it comes out with little boxes and question marks. 
    If I email them the publisher file it is fine.
    How I can get them the PDF file without all the odd markings?

    You probably used a font that is not on their system and did not embed the font in the PDF when you created it.  Don't feel bad.  We all have done it.  Just  make sure to embed your fonts in the Joboptions settings before you recreate the PDF.

  • Blue screen with flashing folder and question mark on startup

    Hello.
    I need help with my Macbook Pro.  I get a blue screen with a flashing folder and a question mark at start up.  To date I have tried the following:
    Apple Hardware (Extensive) Test (Results:  "No Trouble Found")
    Safe Boot
    Reset NVRAM
    Reinstall OS X via the internet (I received no discs when I purchased it).  I select the StartUp Disk to reinstall. When reinstalling via the internet I get to a point of reinstalling Mountain Lion but it asks me to choose a drive - yet there are no drive options to choose from. Then a window comes up asking me to "Select the system you want to use to start up your computer" but no options appear.  When I choose "Restart" a note pops up saying "You can't change the startup disk to the selected disk.  Startup Disk could not gather enough information on the selected disk."
    The only option is "Restart" from the Apple menu.  When I choose that it goes back to the original "Blue screen with flashing folder and question mark on startup."
    I have no Time Machine
    I can't access the disc utility.
    Are there any ideas as to what might be the problem?

    Your hard drive has likely failed and needs replaced. That would explain why the system does not display it when you attempt to reinstall the OS via Internet Recovery.

  • Ichat video works with some people and not others

    Can someone help me? I can video Ichat with some people and not others. HOwever, if the people I can video ichat with put me in a three way chat with someone I can't Icaht video with, it works. Here is the first half of the error I get when I try to call someone with whom it doesn't work:
    Date/Time: 2008-05-08 20:59:35.554 -0400
    OS Version: 10.5.2 (Build 9C7010)
    Report Version: 4
    iChat Connection Log:
    2008-05-08 20:59:21 -0400: AVChat started with ID 2203145046.
    2008-05-08 20:59:21 -0400: scddean8: State change from AVChatNoState to AVChatStateWaiting.
    2008-05-08 20:59:21 -0400: 0x1946a450: State change from AVChatNoState to AVChatStateInvited.
    2008-05-08 20:59:24 -0400: 0x1946a450: State change from AVChatStateInvited to AVChatStateConnecting.
    2008-05-08 20:59:24 -0400: scddean8: State change from AVChatStateWaiting to AVChatStateConnecting.
    2008-05-08 20:59:32 -0400: 0x1946a450: State change from AVChatStateConnecting to AVChatStateEnded.
    2008-05-08 20:59:32 -0400: 0x1946a450: Error -7 (0x1946a450 cancelled the connection.)
    2008-05-08 20:59:32 -0400: scddean8: State change from AVChatStateConnecting to AVChatStateEnded.
    2008-05-08 20:59:32 -0400: scddean8: Error -7 (0x1946a450 cancelled the connection.)
    Video Conference Error Report:
    950.806728 @SIP/SIP.c:2719 type=4 (900A002D/0)
    [SIPConnectIPPort failed]
    Video Conference Support Report:
    0.000000 @SIP/Transport.c:2362 type=1 (00000000/0)
    [SIP/2.0 200 OK
    Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK253ca464241b86c5
    To: 0 <sip:user@lip:16402>;tag=1748993363
    From: u0 <sip:user@lip:16402>;tag=242696585
    Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
    CSeq: 1 INVITE
    Contact: <sip:[email protected]:16402>
    User-Agent: Viceroy 1.3
    Content-Type: application/sdp
    Content-Length: 443
    v=0
    o=SDEAN 0 0 IN IP4 68.109.25.62
    s=skiier526121
    c=IN IP4 68.109.25.62
    b=AS:2147483647
    t=0 0
    a=hwi:17412:2:2400
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 16402 RTP/AVP 110
    a=rtcp:16402
    a=rtpmap:110 X-AAC_LD/22050
    a=rtpID:163897054
    m=video 16402 RTP/AVP 126
    a=rtcp:16402
    a=rtpmap:126 X-H264/90000
    a=RTCP:AUDIO 16402 VIDEO 16402
    a=fmtp:126 imagesize 0 rules 20:160:120:320:240
    a=framerate:20
    a=rtpID:4247390608
    0.130320 @SIP/Transport.c:347 type=2 (00000000/0)
    [ACK sip:user@lip:16402 SIP/2.0
    Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK758f935e51030677
    Max-Forwards: 70
    To: 0 <sip:user@lip:16402>;tag=1748993363
    From: u0 <sip:user@lip:16402>;tag=242696585
    Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
    CSeq: 1 ACK
    User-Agent: Viceroy 1.3
    Content-Length: 0
    0.131540 @SIP/Transport.c:2362 type=1 (00000000/0)
    [SUBSCRIBE sip:user@lip:16402 SIP/2.0
    Via: SIP/2.0/UDP 68.109.25.62:16402;branch=z9hG4bK3c1d470911bfc4fc
    Max-Forwards: 70
    To: u0 <sip:user@lip:16402>;tag=242696585
    From: 0 <sip:user@lip:16402>;tag=1748993363
    Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
    CSeq: 1 SUBSCRIBE
    Contact: <sip:[email protected]:16402>
    Event: conference
    Expires: 3600
    User-Agent: Viceroy 1.3
    Content-Length: 0
    0.258925 @SIP/Transport.c:347 type=2 (00000000/0)
    [SIP/2.0 200 OK
    Via: SIP/2.0/UDP 68.109.25.62:16402;branch=z9hG4bK3c1d470911bfc4fc
    To: u0 <sip:user@lip:16402>;tag=242696585
    From: 0 <sip:user@lip:16402>;tag=1748993363
    Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
    CSeq: 1 SUBSCRIBE
    Contact: <sip:[email protected]:16402>;isfocus
    Expires: 3600
    User-Agent: Viceroy 1.3
    Content-Length: 0
    0.266139 @SIP/Transport.c:347 type=2 (00000000/0)
    [NOTIFY sip:user@lip:16402 SIP/2.0
    Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK07f3cf2d27e5dc4f
    Max-Forwards: 70
    To: 0 <sip:user@lip:16402>;tag=1748993363
    From: u0 <sip:user@lip:16402>;tag=242696585
    Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
    CSeq: 2 NOTIFY
    Contact: <sip:[email protected]:16402>;isfocus
    Event: conference
    Subscription-State: active;expires=3600
    User-Agent: Viceroy 1.3
    Content-Type: application/conference-info+xml
    Content-Length: 0
    [<c-i v="0" st="f" en="sip:user@lip:16402">
    c<h>i</h><m t="a"/><m t="v"/>
    c<h>o</h><m t="a"/><m t="v"/>
    c<h>o</h><m t="a"/><m t="v"/>
    </c-i>
    0.267647 @SIP/Transport.c:2362 type=1 (00000000/0)
    [SIP/2.0 200 OK
    Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK07f3cf2d27e5dc4f
    To: 0 <sip:user@lip:16402>;tag=1748993363
    From: u0 <sip:user@lip:16402>;tag=242696585
    Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
    CSeq: 2 NOTIFY
    User-Agent: Viceroy 1.3
    Content-Length: 0
    0.489410 @:0 type=1 (00000000/0)
    [Bandwidth Detection]
    [Received the first BWD packet from 24.9.170.64:16402]
    0.809558 @:0 type=1 (00000000/0)
    [Bandwidth Detection]
    [Avg=98115.00, NSDev=6.54%]
    1.049428 @:0 type=1 (00000000/1)
    [Bandwidth Detection]
    [Avg=1063830.90, NSDev=55.48%]
    1.396681 @:0 type=1 (00000000/2)
    [Bandwidth Detection]
    [Avg=1218589.60, NSDev=19.06%]
    1.555003 @SIP/Transport.c:347 type=2 (00000000/0)
    [MESSAGE sip:user@lip:16402 SIP/2.0
    Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK7a3f72b46979010e
    Max-Forwards: 70
    To: 0 <sip:user@lip:16402>;tag=1748993363
    From: u0 <sip:user@lip:16402>;tag=242696585
    Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
    CSeq: 3 MESSAGE
    User-Agent: Viceroy 1.3
    Content-Type: text/plain
    Content-Length: 8
    [SECUPD:0]
    1.555264 @SIP/Transport.c:2362 type=1 (00000000/0)
    [SIP/2.0 200 OK
    Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK7a3f72b46979010e
    To: 0 <sip:user@lip:16402>;tag=1748993363
    From: u0 <sip:user@lip:16402>;tag=242696585
    Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
    CSeq: 3 MESSAGE
    User-Agent: Viceroy 1.3
    Content-Length: 0
    22.411383 @SIP/Transport.c:2362 type=1 (00000000/0)
    [MESSAGE sip:user@lip:16402 SIP/2.0
    Via: SIP/2.0/UDP 68.109.25.62:16402;branch=z9hG4bK225017670f058825
    Max-Forwards: 70
    To: u0 <sip:user@lip:16402>;tag=242696585
    From: 0 <sip:user@lip:16402>;tag=1748993363
    Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
    CSeq: 2 MESSAGE
    User-Agent: Viceroy 1.3
    Content-Type: text/plain
    Content-Length: 4
    PING]
    22.552977 @SIP/Transport.c:347 type=2 (00000000/0)
    [SIP/2.0 200 OK
    Via: SIP/2.0/UDP 68.109.25.62:16402;branch=z9hG4bK225017670f058825
    To: u0 <sip:user@lip:16402>;tag=242696585
    From: 0 <sip:user@lip:16402>;tag=1748993363
    Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
    CSeq: 2 MESSAGE
    User-Agent: Viceroy 1.3
    Content-Length: 0
    23.667085 @SIP/Transport.c:347 type=2 (00000000/0)
    [MESSAGE sip:user@lip:16402 SIP/2.0
    Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK0d3ce7637235b638
    Max-Forwards: 70
    To: 0 <sip:user@lip:16402>;tag=1748993363
    From: u0 <sip:user@lip:16402>;tag=242696585
    Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
    CSeq: 4 MESSAGE
    User-Agent: Viceroy 1.3
    Content-Type: text/plain
    Content-Length: 4
    [PING]
    23.667857 @SIP/Transport.c:2362 type=1 (00000000/0)
    [SIP/2.0 200 OK
    Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK0d3ce7637235b638
    To: 0 <sip:user@lip:16402>;tag=1748993363
    From: u0 <sip:user@lip:16402>;tag=242696585
    Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
    CSeq: 4 MESSAGE
    User-Agent: Viceroy 1.3
    Content-Length: 0

    I found the following comment the other day that goes some way to explaining why iChat might have problems with some NAT routers:
    http://www.technologyevangelist.com/2007/02/ichatav_the_bestun.html#comment-53326
    While it doesn't offer any solutions it might be worth firing off some iChat feedback to Apple referencing it. It seems like it might be a trivial bug for Apple to fix and could well alleviate many of the problems people are having.
    In the mean time if your router is one that has SIP ALG you could try disabling it and forwarding all relevant ports to your machine.

  • HT1379 I have  lost everything on my mac, a gray screen with a folder and question mark is blinking. i hav another mac that is running slowly, how can I boot and reinstall os x Lion, i do not have the start up disc with me.

    I have  lost everything on my mac, a gray screen with a folder and question mark is blinking. i hav another mac that is running slowly, how can I boot and reinstall os x Lion, i do not have the start up disc with me.

    Welcome to the Apple Support Communities
    Lion uses Recovery to reinstall OS X. Press Command and R keys when your Mac starts, open Disk Utility, erase the drive and reinstall Lion. The other Mac has probably got its hard disk damaged, so take the Mac to an Apple Store

  • How to integrate Barcode system with inventory issues and receipts.

    Dear Frndz,
    My client would like to like to integrate barcode with the issues and receipts in the inventory.Pl tell me the step by step procedure to do it.
    Regards,
    Srini

    Check these threads
    [BarCode Sticker Printing]
    [Re: BARCODE PRINTING AND SCANNING OF BATCH IN SAPB1]

  • My iMac wont go past the grey screen with Apple Logo and question mark  a caution mark

    My iMac wont go past the grey screen with Apple Logo and question mark  a caution mark

    You may find this support article helpful:
    http://support.apple.com/kb/TS2570
    Ciao.

  • HT201272 My hard drive had some issues and all of my music videos are gone.  The itunes store is charging to download them.  How do I get them re-downloaded?

    My hard drive had some issues and all of my music videos are gone.  The itunes store is charging to download them.  How do I get them re-downloaded?

    From your OLD computer...
    Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
    Full Details Here  >  http://support.apple.com/kb/HT1751
    Also see this migrate iTunes library post by turingtest2

  • HT1941 grey screen with a folder and question mark

    On start up i get a grey screen with a folder and question mark- how do i get out of this?

    10.8 Mountain Lion
    http://support.apple.com/kb/PH11046
    Use Startup Manager to select Startup disk.
      http://support.apple.com/kb/HT1310
    Repair Disk
    Steps 2 through 8
    http://support.apple.com/kb/PH5836
    Reset PRAM.
    http://support.apple.com/kb/PH4405

  • MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

    MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

    Snow Leopard is a Mac OS X version. You say that it's the version you have in your Mac (10.6.8). Do a back up of your files, format the hard drive (using Disk Utility) and reinstall again

  • HT201269 Where are the notes from my iphone backup and how can I sync them with my new macbook and ipad. And my galaxy 3g if someone is feeling especially generous with their time and attention. Many thanks.

    Where are the notes from my iphone backup and how can I sync them with my new macbook and ipad. And my galaxy 3g if someone is feeling especially generous with their time and attention. Many thanks.

    - The iTunes backup that iTunes makes included photos in the camera roll. If yo go to iTunes>Preferences>Devices what is the date of the backup? Is it when the photos were on the iPod? You have to restore from that backup.
    - What may have happened is that you backup the iPod after you restored the iPod but before restoring from backup. iTunes only keeps one backup and overwrites the previous backup with the changes.

Maybe you are looking for

  • Is it possible to show previous sessions tabs AND homepages on startup?

    Hi :) I'm wondering if it's possible to open all the previous session's tabs at startup and also open the homepage(s) at the same time? I've tried fiddling with everything in the general tab but with no success. I couldn't find any solutions on the n

  • I lost my iphone and I don't know how to use the "fined my iphone" app

    Hi, can someone help me how to find my iphone using the app "find my iphone"?

  • I'd like to create 2 choice boxes in applet, how can I can it ?

    I have done a choice box in applet like this: Panel p2 = new Panel(); p2.setLayout(new GridLayout(3,0)); choice.add("Leftfoot"); choice.add("Layer1"); choice.add("Layer2"); choice.add("Layer3"); choice.add("Layer4"); choice.add("Rightfoot"); p2.add(c

  • Remembering ON/OFF states in Lingo

    I have a series of images 71 total. Each set of images consists of a transparent PNG file the "off" state and a regular PNG file the "on state". I need a presentation that initially has all of the images in the off state but each one gets turned on w

  • Promise J4 faster than M4?

    I recently purchased a Promise Pegasus2 M4 drive array.  I was surprised to get slower performance than from my older J4 enclosure. For the setup, I tried two sets of striped SSDs: 1. 4 x Intel 320 SSD (600gb each) -- these do not support SATA III 2.