MSI GT780DX turbo boost mode problem

My notebook has upgraded Windows 8 from Windows 7. I take a turbo boost mode (P1 button) for few minutes. It will be changed to off mode automatically. How should I do?

Make sure to uninstall any prior SCM or S-Bar version and install this one: http://www.msi.com/service/download/utility-19910.html

Similar Messages

How to enable turbo boost in my machine

i have hp( pavilion 15-n240se) .
my operating system is windows 8.1 .
product number:F9U42EA#ABV
i want to know if my processor goes to turbo boost mode automatically or i should enable it in some how

Hi,
The system itself will handle the process that means automatically.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Turbo-Boost: How to find out about current processor sped?

On the new Mac Pros the processors can enter Turbo-Boost-mode. How can I find out at which speed the processors are currently running?
Thanks!

It is complicated. Can happen in nanoseconds. And depends on processor and load as to how many cores will go to sleep and how many go into turbo... if the app is single threaded.
It is something you don't really need to know or worry about.
There are better tools for Windows to monitor core temp and frequency (and voltage).

MSI GT780DX P1 "TURBO MODE" automatically off in few seconds

Hello ! In my MSI GT780DX (I5, gtx570m 1.5GB, Windows 7 x64 pro, charger ON) P1 "TURBO MODE" automatically off in few seconds (aimation from s-bar)
Everything work fine, until install the new driver for GPU from nvidia, v320, and give me problem whit P1 mode.
I'm uninstall the driver, and instal old, no fix, I'm uninstall all driver MSI (nvidia overclok tool, s-bar, afterburner, nvidia drivers) ,and install it again, no fix problem, still P1 "TURBO MODE" automatically off in few seconds ;/
curiosity:
For more GPU clok (700MHZ)and memory (1700), I run "nvidia inspector",only open "show overcloking",and "Driver profile" , nothing change ! Then run afterburner , and set gpu clok to 700Mhz, memory clok 1700, aply, and in game it's run gpu to 700Mhz, no pressing P1 button !!
But I want to press only P1 button for more gpu clok...
sorry for bad english.

For anyone that needs help setting the overclock tool to run at startup, just set a task to run the tool with admin priveleges at user login with the task scheduler.
Can confirm this works for me, I can now use my turbo button and change brightness without SCM crashing on the latest Nvidia drivers (331.65).

MSI GT683R Turbo mode???

Hi I just got a msi gt 683r all the drivers are installed and all the lights of the buttons are working but the turbo doesnt seem to make any difference in frames or performance in any game,i checked through fraps but got no fps increase in any game,the benchmark that came with the notebook however shows only a difference of 18 points with the trubo mode on and no frames difference. Is there a problem with my notebook???

Quote from: Svet on 22-February-12, 22:51:20
check CPU Freq. [when its underload] with CPU-Z
Well i tried MSI afterburner along with intel turbo boost technology,i cud not find the frequency in cpu-z,however i noticed that in msi after burner while playing the game (bf3) it gave me a clock of (shader clock 1550) and (core clock 770) when i press the turbo it goes to 1627 and 813 respectively so i guess it is overclocking however the cpu remains constant at 2.60GHz so after these results i think everything is fine....I was expecting to get a drastic change while overclockingby TDE. I assume that the TDE pushes the vga card to its maximum limit,while without TDE enabled the game uses as much resource it wants to use...am I right?
I guess there is nothing to worry about??

MSI P67A-C45 - C-State, Turbo Boost, RAM and UEFI questions

I received my MSI P67A-C45 B3 a few days ago. After having installed the OS and the rest, I tried to enable C-State (no limit) and surprisingly it works (with the B2 it caused a freeze). After some time I noticed a sort of high pitched noise and I knew it was the C-State because I had read it here. So I just disabled it, later I'll tray to see if the other C-States (C3, C6, etc.) work without any noise. I'll also try different combinations of the phase mode, currently I'm using Intel SVID because it has a slightly lower idle voltage.
1) First thing, why do I hear a noise only when C-State is enabled? I'm curious.
2) I've also read that disabling the C-State affects how Turbo Boost works, is it true? If yes, what is the difference? Honestly I don't see any relation, one is a power saving feature and the other gives temporary extra performance when needed.
3) About the B3, I noticed that my RAM (G.Skill Ripjaws 1333MHz) haven't the correct timings, they are one value higher (more loose, for example 10 instead of 9).
This didn't happen with the B2 and UEFI 1.8, all the timings were exactly those in the JEDEC #4 profile. I see that in version 1.9 and 1.A they've improved memory compatibility, perhaps it's related?
Anyway since it doesn't matter to me I just left them on auto.
4) I'm not planning to update my UEFI (B3 came with v1.9) for a few months since it works fine (except that small RAM problem) and I don't overclock.
I noticed that the latest version is 1.A, so it's normal to use 1.A after 1.9? I've never seen it before.

Quote from: HU16E on 13-April-11, 17:02:09
This might shed some light on question #1. Reply #17; https://forum-en.msi.com/index.php?topic=147219.0
Thanks!
Does someone know anything about question #2?
@krkrkr
I'm currently using APS mode with C-State enabled and the noise isn't there. The strange thing is that the Vcore is the same both with C-State enabled or disabled. Anyway I think I'll continue using APS mode with C-State enabled, thanks.
Now I have a problem, I'm trying to update the UEFI but it doesn't work. I downloaded UEFI v1.A for the B3, then I used method I of the MSI HQ Tool but during the UEFI update it blocks at "Preparing to take a new BIOS backup". It just stays like that all the time...
How can I resolve?
Now I still have v1.9 and if I go in the CPU features I get "Error invalid input method" (or something similar, I can't remember properly). Before trying to update it didn't happen.

Turbo boost problem for DV6-2170ee with Windows 7 Proffessional SP1 32 bit

hello every body,
For:-
HP DV6-2170ee with I7 720 qm processor
System: Windows 7 Professional SP1 32 bit
I have a strange problem, while i am working on battery processor can boost up to 2.6 but when i connect it to the Ac adpater charger, no boost is there?!!!!
Checked through internet and did the following:-
1-update the bios.
2-check power option and use the same settings as in battery mode.
3-observe processor temperature through CPUID HWmonitor, it's almost 65 lower than 67 in the battery case.
4-searched allover the whole internet google .. yahooo ...
5-Each time i try to install the SP50038 which is the driver for the inter turbo boost, it gives an error message "your pc doesn't meet the minimum requirement"
TIll the moment no solution, could you please help me ?
Thank you for your time ans i hope to receive solutions soon ..
Thanks in advance ;-)
This question was solved.
View Solution.

Hi,
To answer your last question first, the Turbo Boost Technology Driver is only intended for processors with an integrated GPU - the i7-720QM does not have this.
More difficult is why you observe no Turbo Boost on AC Power.
Try the following.
Shut down the notebook. Tap away at f10 as soon as you start the notebook to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
When windows has reloaded, download and install the Turbo Boost Technology Monitor from Intel on the following link and see what this shows.
http://www.intel.com/support/processors/sb/CS-031038.htm?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

MSI GE70 2OE TURBO BOOST

I own a msi ge70 2oe ssd version.Turbo boost is not working.
Notebook is on high performance or balanced mode doesn't matter it only goes 2.4 ghz max.(Max gpu %100)I tested max cpu clock rate in Intel Processor Diagnostic Tool and cpu-z while playing battlefield 4.
Bios version 1757IMS.516
Firmware version 1757EMS1.506
Battery plugged and ac adapter plugged in.

Quote from: darkhawk on 13-December-13, 10:05:06
The reason it probably goes to 3.x GHz right away and then drops rather quickly to 2.4 GHz is most likely due to heat. 97C is getting close to the Tmax for the processor, and it's probably throttling back the CPU in order to keep it from being hurt.
Most likely you need to open the notebook up and replace the heatsink compound on the CPU and GPU (89C is rather hot IMHO for the GPU).
Or you can contact MSI and do an RMA.
>>How to contact MSI.<<
So you are saying that there is no another solution for this issue?

Turbo boost problem for DV6-2170ee with Windows 7 Proffessional SP1 32 bit

hello every body,
I have a strange problem, while i am working on battery processor can boost up to 2.6 but when i connect it to the Ac adpater charger, no boost is there?!!!!
Checked through internet and did the following:-
1-update the bios.
2-check power option and use the same settings as in battery mode.
3-observe processor temperature through CPUID HWmonitor, it's almost 65 lower than 67 in the battery case.
4-searched allover the whole internet google .. yahooo ...
TIll the moment no solution, could you please help me ?
Thank you for your time ans i hope to receive solutions soon ..
Thanks in advance ;-)

Have you made sure you are using the high performance profile? Here is where you can check:
Double check you performance profile and make sure its on HIgh Performance. Also download CPU-Z to monitor your CPU speed. Im unsure if the turbo boost applies to all the cores of the processor. CPU-Z will give you a better idea of whats going on.
CPU-Z
Thanks,
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Msi gx 623 no turbo boost

hello everyone,
i have my msi gx 623 laptop for over the years now, at the begining for like 8 months everything was ok, with turbo off cpu speed was almost 2.0MHz with turbo on cpu speed always jumped to over 2,3MHz.
Now for last few months i've noticed that my turbo button doesn't boost cpu while playing games.
this one screen was taken with turbo off
and this one with turbo on
anyone have any idea what can be wrong? as you can see, all what turbo does is rises cpu temp nothing else.
im runing win 7 x64 and bios wasn't updated at all

Quote from: Bas on 13-August-10, 09:32:33
As I said before, put W7-32bit on it, unless you have specific 64bit software you must run, as I do believe SCM doesn't function.
32bit software with hardware control won't work in 64bit windows!
Nor does any 32bit program benefit anything being run in 64bit Windows.
To say brief: Do not run 64bit Windows if you don't know why you run it.
i run 64bit because 32bit doesnt use all of my 4gb rams, well at least it didnt one year ago.
btw how can you explain why i had no problem with win 7 64bit and turbo boost 4-5 months ago?
here is some proof that scm doesnt have problem functioning on 64bit, the only thing that doesnt work is that cpu speed doesnt boost with turbo on

Turbo Boost Problem on Batteries in 4530s Probook

Hi Friends!
Please Some one help me , I have 4530s probook (LJ518UT) laptop Core i5 2450M. My Problem is turbo boost not working on batteries , But its Completly Working When i connect my Charger, Please Solved this Problem. My Laptop Bios Version is f.30 Updated 27 dec 2012. My Operating System is Windows 7 Home Premium. Please Reply me Urgently guys & Solve that problem.... Thanks in Advance.

Your notebook is an Enterprise/Business model. I would recommend posting this in the HP Enterprise Support Forums for better coverage.
You can access the enterprise support forums at the following link.
http://h30499.www3.hp.com/
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HP g62-a60EM Intel Turbo Boost Technology Driver problem

Hello!
When I try to install Intel Turbo Boost Technology Driver from the HP solution&drivers page i get this error: This computer does not meet the minimum requirements for installing the software.
Can you assist me with solution how to fix this problem? Before I changed my OS from Windows 7 Professional (64-bit) - English to Windows 7 Professional (64-bit) - Slovenian I had no problems.
Sorry for my bad English.
Regards,
Dragan
This question was solved.
View Solution.

dmarinov,
Short answer is you do not need the driver. The driver is intended for laptops using the same CPU but integrated GPU only. Since your PC has a discrete GPU (ATI), the TBT driver is not necessary.
-wes
I am an HP employee.

Turbo Boost and Eco buttons don't work on MSI GX660R 060US

When I try to download the Turbo boost driver, I get the following error:
" This computer does not meet the minimum requires for installing the software".
Help! How can I get the Turbo Boost and Eco buttons to work?

install sbar and nvidia oc tool to make the turbo button work. As of intel turbo boost there is no such driver or software because its purely dos based not os the intel boost will kick in when you have some free core to boost in.. as of eco mode pls descrIbe more

G580 (i5-3210m;gt635m) Turbo Boost problem

Hello!
I've bought the new G580 with the i5-3210m and the nVidia gt635m. The problem is that when i want to install the Turbo Boost Gadget on Win7(downloaded from Intel download center), it says that my processor is not compatible with the turbo boost. So how can I fix this problem? I installed all of the drivers from the DVD that came with the machine.

Your notebook is an Enterprise/Business model. I would recommend posting this in the HP Enterprise Support Forums for better coverage.
You can access the enterprise support forums at the following link.
http://h30499.www3.hp.com/
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

MSI GE70 2OE-012NL lost Turbo Boost after updating firmware? (or not)

Read EDIT2
Hi,
I just found out about the 2013-08-15 firmware update (version 1506) for my MSI GE70 2OE-012NL.
After flashing this, my cpu load doesn't go over 99% and max speed is around 2.38GHz. Before it had peaks to 3.40Ghz because of the Turbo Boost. (tested with Intel's Processor Diagnostic Tool)
Any insight on this?
EDIT: speed reduction is very noticable in applications like AutoCAD/REVIT/Cubase (rendering) and games (Battlefield 3 automatically threw me back to 'low' profile in graphic settings where it was 'high' before).
EDIT2: it's going up to 3.29Ghz again with a new test in Intel's Processor Diagnostic Tool. Weird. Nevertheless I would like to know what the differences are.

Quote from: darkhawk on 13-December-13, 10:05:06
The reason it probably goes to 3.x GHz right away and then drops rather quickly to 2.4 GHz is most likely due to heat. 97C is getting close to the Tmax for the processor, and it's probably throttling back the CPU in order to keep it from being hurt.
Most likely you need to open the notebook up and replace the heatsink compound on the CPU and GPU (89C is rather hot IMHO for the GPU).
Or you can contact MSI and do an RMA.
>>How to contact MSI.<<
So you are saying that there is no another solution for this issue?

MSI GT780DX turbo boost mode problem

Similar Messages

Maybe you are looking for