MSI GTX 460 1Gb questions

what's the recommended or lowest settings for this cards fan speed at idle? and would it affect the auto control when the card's temperature rises.
also I've read an article on how to overclock it but it only mentions roughly how high the core clock can go(825MHz). if i were to increase the shader and memory, how would i approach this or should i?
haven't tampered with a graphic card before so any additional help/info would be appreciate.

There's a minimum fan speed in place already if you check in Afterburner. I'd suggest you just leave it to adjust the speed accordingly.
Overclocking varies on each card. You need to test it youself to find the limit, though be careful you don't push it too far or you may break something. Afterburner is a good tool to use for overclocking the graphics card.

Similar Messages

MSI 890FXA-GD70 & SLI two gtx 460 1Gb ???

can i install(TWO CARD) MSI Cyclone GeForce GTX 460 1GB GDDR5 SLI on :
( MSI 890FXA-GD70 Mainboard), (Win7 64Bit ) CPU (AMD Phenom(TM) II X6 1090T Processor (6C, 3.62GHz, 2GHz IMC, 6x 512kB L2, 6MB L3) to allows 3 or 4 DVI monitors to be used in Eyefinity without needing a DisplayPort monitor or active adapter ???? to play microsoft flight simulator X for example on 3 LCD ???

Also Eyefinity is AMD feature, Nvidia cards doesn't have such.
Read more about it at: http://www.amd.com/us/products/technologies/amd-eyefinity-technology/Pages/eyefinity.aspx
And yes, SLI isn't possible as Bas mention.
To run SLI you need latest MSI's AMD platform board for AM3+, named 990FXA-GD80:
http://bg.msi.com/product/mb/990FXA-GD80.html#?div=Basic

Msi GTX 460 HAWK Beeps Problem Load to Idle

Hi all, I have the following problem with MSI gtx 460 Hawk graphics card, after being in load when returns to idle, the graphic card plate for several beeps, I already try changing the PCIe slots and psu connectors and still the same problem, the graphics card in game works well in 3dmark too and everything you throw, but always when return the load to idle makes a few beeps, any ideas? thanks in advance, best regards to all, Diego.-
CPU Intel i5 Stock
Motherboard Msi DG65
Memory brand, DDR3 2x2 GB 1600 Gskill cas 7 ripjaws
Video card MSI gtx 460 HAWK 1GB
Hard drive(s) 1x Wd Black 500 GB 7200 rpm 1x WD Green 1.5 TB 7200rpm
Operating system and version Windows7 x64
Power Supply Antec Quatro 850w

Quote from: Svet on 15-November-10, 17:42:19
Doesn't matter.[it can happens to both versions. ==> buzzer defect issue, causing to work abnormally.]
RMA the VGA as Henry said
Small Update:
two things:
First:
I noticed that the gpuz, report it when VGA is under load ( furmark ) the voltage VDDC value the higher value is 0.96, is a low voltage ? 460gtx under load must be near 1.02 ?
Second:
My reseller told me that behind the card must have an sticker "void warranty if removed " over OCP protection but the card does not comes with that sticker is that possible ?
Thanks in advance

Geforce GTX 550ti 1GB or GTX 460 1GB or other?

I have a 2 year old homebuilt i7 920 with 12GB ram built on an Asus P6T MB with a Seasonic 650W PS. I'd like to upgrade the current Graphics card that was fine for Photoshop but not for Premiere Pro which I'm just experimenting with. I'd like to get a better card for it without going crazy because this will not be my main computer. I never OC'd it either as for Photoshop it seemed fine at the time.
It will be used typically for making under 5 min videos that consist of a around half doz clips each from my Canon 1DM4 in HD 1080. Not too much in the way of effects currently with unsharp mask, color correction and transitions etc.
The ones I've sort of narrowed down to are the GTX 460 1GB or maybe the GTX 550ti 1 GB might do as well for this use? I don't like limiting myself if I'd see much of a difference between them. I'm also totally open to any suggestions for others as well.
As a side note, I'm also in the planning stages for building a new computer from scratch and that will be my main computer that I'll most likely put a better card in during the coming month or two.
While I've built several computers over the years I'm finding this graphics card choice bewildering to say the least! I hope that's enough info to go on and I greatly appreciate any help as most review sites for cards pertain mostly to gaming.
Thanks in advance,
Jim

I don't know the power needs of my GTX 285 (in a file somewhere) but I wasn't worried 'cause I have an 850 power supply
I do know that the card has 2 power connections... I presume one for the GPU and the other for the onboard fan
Before you think your PS will work... check your total requirments
Power supply calculator http://extreme.outervision.com/index.jsp (the PRO version)
Or http://educations.newegg.com/tool/psucalc/index.html?Tpk=power%20supply%20calculator

GTX 460 1GB CUDA support in CS5.5?

I've read the list of supported CUDA boards for CS5, but does this mean that the GTX 460 1GB boards will never have support in CS5.5?

Think what could be done with 2, 3, or 4 GPUs.
Hey, no one else at this point even has one. So we Premiere Pro users are lucky in that regard.
Personally, I still think the move away from the proprietary CUDA are towards OpenCL is more important than adding SLI That opens up ATI cards as well. And for the money, ATI cards often have double or triple the number of stream processors over nVidia's cores. That can mean significantly better performance out of ATI cards for the same or less money.

MSI GTX 460 1 Gb OC & NiBiTor, fan speed mod

A dew days ago, i purchased an MSI GTX 460 1 GB OC graphics card.
This one:
http://hr.msi.com/product/vga/N460GTX-M2D1GD5-OC.html
Problem is, fan is too loud at idle. I've tried using MSI Afterburner but it won't let me
go lower than 40%, which is too much. As Svet is no longer able to mod BIOS (which i perfectly
understand when we look at number of requests he received daily ) i tried to do it myself.
I saved BIOS with GPU-Z and opened it with NiBiTor. I found an option to change minimum fan speed
from 40 to 30. But, problem is that NiBitoR puts red dot at the "integrity" check, immediately when
I open it. Does this means that NibiTor was unable to properly read BIOS information? Does this mean that I can't safely save a BIOS and will damage my card if I try to flash a card with modded BIOS?
NibiTor is version 6.02. My card is MSI N460GTX M2DIGD5
S/N 602-V232-150B1101136247

My e-mail? There is nothing there.
I think that GPU-Z has some problems saving my BIOS. When i use nvflash
saving option (from DOS), Nibitor shines a green dot whan i opened BIOS with it!
I've sent an e-mail with BIOS to Svet, but with the version extracted with GPU-Z. I think
that BIOS was corrupt...

MSI GTX 460 HAWK Talon Attack beeps when is not on load.

Hello!
Yesterday I bought MSI GTX 460 HAWK Talon Attack together with FSP Group EVEREST 85PLUS 600W PSU.
I put it all in my old PC, powered on, but then after a while (when started to install latest MSI drivers for HAWK) my VGA started beeping periodically. These are short beeps in not fixed time interval.
The most interesting thing is that when I put my card on load, the beeping stops - it beeps only when I am in windows surfing internet etc.
I have searched through forums and didn't find a clear solution to this problem, but most likely it is a PSU issue.
MSI states, that card requires 24A on 12V for whole system (Core i7 ...).
My PSU is capable of the following:
Output Current:
30.0A @ +3.3V DC
    30.0A @ +5V DC
    18.0A @ +12V1 DC
    18.0A @ +12V2 DC
    18.0A @ +12V3 DC
    18.0A @ +12V4 DC
    .8A @ -12V DC
    3.0A @ +5Vsb DC Standby
Complete configuration of my system is:
CPU: AMD Athlon 64 x2 6000+ (Will change soon)
MB: Asus M2N-E (Will change soon)
RAM: 2 x 2 GB DDR2 800 (Will change soon)
HDD: 2 SATA drives
DVD: 1 PATA drive
VGA: MSI GTX 460 HAWK Talon Attack
PSU: FSP Everest 85PLUS 600
Is there a problem with PSU or something else could be wrong?
Thank you in advance.

Hi all !
I also have the annoying beep problem.
A couple of weeks ago I purchased a GTX460 Talon Attack and as soon as I entered a game I got beeps coming from the card. Tried a 3DMark and Kombustor, same issue. The PC is build by me, had a JeanTech 700W PSU and a GTX260 which gave me no problems, ever. As soon as I replaced it with the 460, the beeping started.
I returned it to the supplier and i got it back two days ago with the following message:
"Graphics card passes all Tests with no issues, Tests Run: Crysis WarHead, Furmark, 3Dmark Vantage, AVP, Lost Planet 2, Stone Benchmark MSI Kombuster, Resident Evil Benchmark, ATI Mecha, ATI Ladybug, "
(Graphics card passes all Tests with no issues, Tests Run: Crysis WarHead, Furmark, 3Dmark Vantage, AVP, Lost Planet 2, Stone Benchmark MSI Kombuster, Resident Evil Benchmark, ATI Mecha, ATI Ladybug, Streetfighter Benchmark and heaven benchmark tool, these were all tested at 1920 x 1200 resolution running maximum settings, tested on DX9, DX10 and DX11 where applicable, there was no issues apparent. There was no bleeping coming from the card)
Regards,
Overclockers UK - Support"
So I bought a brand new Antec TruePower 650W as I thought maybe the PSU does not regulate the voltages properly. No luck, I am still getting beeps but it's very weird. In idle (browsing internet, watching a movie or listening to music) the card is completely silent and sits in 25-29 degrees. As soon as I enter World of Warcraft (for example) and the temperature rises, at 35-36 degrees, I get 4-5 beeps then it stays quiet and I can play normally. (1920x1200 highest settings)
When I get out of the game and the temp drops, again around 36-35 degrees I get 1-2 beeps and then it remains silent again. No artefacts, errors or freezes. (so far)
I have seen the round sticker "Warranty void if removed" on the back of the card but I haven't touched it.
I really don't know what to do with it at this point and it's a very annoying problem, I cannot play anything like this.
I don't want to RMA it again since it already cost me £30 (transport & testing) plus a brand new PSU. And I love the card, the construction, the looks and the fact that it runs so cold. I just want a "fix".
Any ideas please ?
My system:
Intel i7 920 2.67GHz
Asus P6T SE X58
Corsair XMS3 3x2Gb DDR3, 1600MHz, 7-7-7-20, 1T
Zalman CNPS10X-Quiet
Creative X-Fi Fatal1ty
Windows 7 Home Premium 64bit
Sorry for the wall of text and thanks in advance. I really hope someone has a solution or it's going to be an annoying Christmas. (I'm a technical PC engineer with a fixation for everything to go smooth)

MSI GTX 460 Hawk hangs, need help

Hello!
Need help with my MSI GTX 460 Hawk.
Sometimes it hangs and I need to restart my computer and sometimes screen goes black and then windows says that video driver wasn't responding and was recovered.
Computer hangs more often in the 3D game, but in not 3D programms computer hangs too, but no so often.
The temperature is ok, maximum is 70 deg. in 3D game. I even tried to set videocard cooller to 100% and it didn't help.
I did no overclocking or anything like this.
I use the latest videodriver from nvidia's website and the latest directx.
Windows 7 64bit.
Can you help me to solve this problem?

Quote from: flobelix on 25-August-13, 00:21:30
Follow >>Posting Guide<<
If you are really in lack of parameters:
Board: Gigabyte GA-EP45T-UD3LR
VGA: MSI GeForce GTX 460 Twin Frozr II
PSU: Raidmax 500W (22A on 12v rail)
Intel Core 2 Duo 8500 3.16GHz LGA 775
OS: Windows 7 64bit
The problem: Videocard began to hang:
Sometimes it hangs and I need to restart my computer, sometimes I get BSOD and sometimes screen goes black and then windows says that video driver wasn't responding and was recovered.
Computer hangs more often in the 3D game, but in not 3D programms computer hangs too, but no so often.
What I've allready tried:
1. Installed latest drivers from nvidia.com and latest directx.
2. Checked temperature: maximum is 70 deg. in 3D game at 100% load. I even tried to set videocard cooller allways to 100% and it didn't help.
3. Installed MSI Kombustor to burnin test videocard, but I can't catch any hangups with it.
4. Checked windows system log. The last warning after driver recovery message is:
Video driver nvlddmkm wasn't responding and was recovered.
5. Two latest BSODs were caused by dxgkrnl.sys and nvlddmkm.sys drivers.
6. Finally installed MSI LiveUpdate, it shows that no videodriver is installed and wants to download an old videodriver ver. 258.96.
Need help to solve this problem.

MSI GTX 460 Hawk Freeze

Hello
problem: GTX 460 Hawk does Freeze on SLI and without SLI (freezes so it doesn't respond to anything at all, only turning pc off can be done)
-sometimes on start up but usually after 0-2 minutes of battlefield bad company 2
-few times didn't get even to login screen on windows.
System:
core i5 750
4gb ddr3 ripjaws
Asus Maximus 3 GENE
corsair 850 watt psu
MSI gtx 460 hawk X2
tried new drivers and also ones on dvd that came with GPUs (older drivers)

Quote from: oldtimes on 14-January-11, 08:10:17
is there some program that could test if card is defective?
MSI Kombustor is good for stress testing. It comes with Afterburner.

MSI gtx 460 and pale Picture

Hi
I was having XFX 8800 and I just got my new MSI gtx 460 hawk card but I notice that the colors are pale or a little blurred, I am not 100% sure maybe it my eye, is there a way to make sure ?
BTW I dont have someone good with computers near me.
Thanks

I don't know where you would get a new monitor from but this seems to have a very large selection to choose from.
http://www.egprices.com/subcat.php?sub=17&sortby=&sortby=&pageNum_rsProd=0

MSI GTX 560Ti Hawk Question

Just a quick question to start with, how many RPMs should my fans be doing at 100%?
I have a feeling something is going horribly wrong with my new card.

Use MSI Afterburner to adjust the fan speed - you can draw a graph and dictate how much the fan should be working against a given temp.
Is the MSI GTX 560 Ti Hawk the most problematic card.....i mean EVERYONE complains about fan noise and temps. If i had read the forums first before buying the card....i wouldn't have bought it.

Msi gtx 460 hawk upgrade???

had a Gtx 460 hawk since 2011 and now thinking of upgrading what would you recommend? budget of £150 was thinking of a gtx 660 ti want to stay NVidia

price I keep coming with for a gtx 760 is around the £175 (msi geforce gtx 760 oc gaming edition ) will keep looking but thanks for the idea of a 760 would be a good upgrade from the 460

MSI GTX 460 Hawk

Hi,
I have recently purchased and installed this gfx card. Updated all my drivers and cross referenced with MSI Live 4 to make sure my system is as updated as it can be. My comp specs are in my sig
I have had a look at the Afterburner software which triggered my concerns. My stock "out of the box" core clock speed is 675mhz (which is a regular gtx460) as opposed to the suggested 780mhz.
I have done abit of googling and everyone seems to have out of the box 780mhz.
I was wondering if this is supposed to be the case, where the card under factory settings is 675 and the OC'd edition still requires me to overclock it manually via Afterburner? If theres something wrong, is there anything I can do before taking it back to the store for return/exchange?
I am pretty sure that the card I purchased is indeed a hawk as there are labels on the card and did not get ripped off. Also I live in Australia (if that matters).
I would really appreciate any feedback or opinions in regards to this topic.

Quote from: ggCakes on 14-January-11, 12:11:41
hmm, they seem to claim that in certain areas the 460gtx hawk is defaulted at 675mhz and should live with it.
I am quite upset at this "solution", as I did not pay extra money for a hawk only to run it at a normal 460's clock speed
anyone got the vbios updates etc?
It's vary either 780 or 810 ==> http://eu.msi.com/index.php?func=prodvgaspec&maincat_no=130&cat2_no=&cat3_no=&prod_no=2152
You have 675 [e.g. yours vary too much..]
Can you tell the VGA SN?
Quote
anyone got the vbios updates etc?
Apply new desired clock freq. with Afterburner 2.1.0 Beta 6:
http://downloads.guru3d.com/Afterburner-2.1.0-Beta-6_d2604.html
Then go test the VGA and see if everything is working fine

MSI gtx 460 768mb OC - custom resolution problem

Hellow,
recently bought this card and I want to connect to TV with a resolution 1360x768, but it is not supported, please help me.( I use VGA cable connection, because HDMI cable does not work for me). How can I set my own resolution.
Thanks in advance

First right click blank area of desktop and in the menu that pops up select 'NVIDIA Control Panel', in the window that opens up at the upper left under 'Select a task click on 'Change screen resolution' and you get this window and click the 'Customize' button:
You then get this window and click 'Create Custom Resolution' button:
You then get this window and this is where you enter the information for your custom resolution:
These screenshots taken from my PC using NVIDIA drivers 260.89 with my 465 GTX. It seems to me yours would work out the same way.
If it doesn't work for you then I don't know what else you can try.

MOVED: SPLIT: MSI GTX 460 HAWK Talon Attack beeps when is not on load.

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=146886.0

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=146886.0

MSI GTX 460 1Gb questions

Similar Messages

Maybe you are looking for