Msi GTX 460 HAWK Beeps Problem Load to Idle

Hi all, I have the following problem with MSI gtx 460 Hawk graphics card, after being in load when returns to idle, the graphic card plate for several beeps, I already try changing the PCIe slots and psu connectors and still the same problem, the graphics card in game works well in 3dmark too and everything you throw, but always when return the load to idle makes a few beeps, any ideas? thanks in advance, best regards to all, Diego.-
CPU Intel i5 Stock
Motherboard Msi DG65
Memory brand, DDR3 2x2 GB 1600 Gskill cas 7 ripjaws
Video card MSI gtx 460 HAWK 1GB
Hard drive(s) 1x Wd Black 500 GB 7200 rpm 1x WD Green 1.5 TB 7200rpm
Operating system and version Windows7 x64
Power Supply Antec Quatro 850w

Quote from: Svet on 15-November-10, 17:42:19
Doesn't matter.[it can happens to both versions. ==> buzzer defect issue, causing to work abnormally.]
RMA the VGA as Henry said
Small Update:
two things:
First:
I noticed that the gpuz, report it when VGA is under load ( furmark ) the voltage VDDC value the higher value is 0.96, is a low voltage ? 460gtx under load must be near 1.02 ?
Second:
My reseller told me that behind the card must have an sticker "void warranty if removed " over OCP protection but the card does not comes with that sticker is that possible ?
Thanks in advance

Similar Messages

MSI GTX 460 HAWK Talon Attack beeps when is not on load.

Hello!
Yesterday I bought MSI GTX 460 HAWK Talon Attack together with FSP Group EVEREST 85PLUS 600W PSU.
I put it all in my old PC, powered on, but then after a while (when started to install latest MSI drivers for HAWK) my VGA started beeping periodically. These are short beeps in not fixed time interval.
The most interesting thing is that when I put my card on load, the beeping stops - it beeps only when I am in windows surfing internet etc.
I have searched through forums and didn't find a clear solution to this problem, but most likely it is a PSU issue.
MSI states, that card requires 24A on 12V for whole system (Core i7 ...).
My PSU is capable of the following:
Output Current:
30.0A @ +3.3V DC
    30.0A @ +5V DC
    18.0A @ +12V1 DC
    18.0A @ +12V2 DC
    18.0A @ +12V3 DC
    18.0A @ +12V4 DC
    .8A @ -12V DC
    3.0A @ +5Vsb DC Standby
Complete configuration of my system is:
CPU: AMD Athlon 64 x2 6000+ (Will change soon)
MB: Asus M2N-E (Will change soon)
RAM: 2 x 2 GB DDR2 800 (Will change soon)
HDD: 2 SATA drives
DVD: 1 PATA drive
VGA: MSI GTX 460 HAWK Talon Attack
PSU: FSP Everest 85PLUS 600
Is there a problem with PSU or something else could be wrong?
Thank you in advance.

Hi all !
I also have the annoying beep problem.
A couple of weeks ago I purchased a GTX460 Talon Attack and as soon as I entered a game I got beeps coming from the card. Tried a 3DMark and Kombustor, same issue. The PC is build by me, had a JeanTech 700W PSU and a GTX260 which gave me no problems, ever. As soon as I replaced it with the 460, the beeping started.
I returned it to the supplier and i got it back two days ago with the following message:
"Graphics card passes all Tests with no issues, Tests Run: Crysis WarHead, Furmark, 3Dmark Vantage, AVP, Lost Planet 2, Stone Benchmark MSI Kombuster, Resident Evil Benchmark, ATI Mecha, ATI Ladybug, "
(Graphics card passes all Tests with no issues, Tests Run: Crysis WarHead, Furmark, 3Dmark Vantage, AVP, Lost Planet 2, Stone Benchmark MSI Kombuster, Resident Evil Benchmark, ATI Mecha, ATI Ladybug, Streetfighter Benchmark and heaven benchmark tool, these were all tested at 1920 x 1200 resolution running maximum settings, tested on DX9, DX10 and DX11 where applicable, there was no issues apparent. There was no bleeping coming from the card)
Regards,
Overclockers UK - Support"
So I bought a brand new Antec TruePower 650W as I thought maybe the PSU does not regulate the voltages properly. No luck, I am still getting beeps but it's very weird. In idle (browsing internet, watching a movie or listening to music) the card is completely silent and sits in 25-29 degrees. As soon as I enter World of Warcraft (for example) and the temperature rises, at 35-36 degrees, I get 4-5 beeps then it stays quiet and I can play normally. (1920x1200 highest settings)
When I get out of the game and the temp drops, again around 36-35 degrees I get 1-2 beeps and then it remains silent again. No artefacts, errors or freezes. (so far)
I have seen the round sticker "Warranty void if removed" on the back of the card but I haven't touched it.
I really don't know what to do with it at this point and it's a very annoying problem, I cannot play anything like this.
I don't want to RMA it again since it already cost me £30 (transport & testing) plus a brand new PSU. And I love the card, the construction, the looks and the fact that it runs so cold. I just want a "fix".
Any ideas please ?
My system:
Intel i7 920 2.67GHz
Asus P6T SE X58
Corsair XMS3 3x2Gb DDR3, 1600MHz, 7-7-7-20, 1T
Zalman CNPS10X-Quiet
Creative X-Fi Fatal1ty
Windows 7 Home Premium 64bit
Sorry for the wall of text and thanks in advance. I really hope someone has a solution or it's going to be an annoying Christmas. (I'm a technical PC engineer with a fixation for everything to go smooth)

MSI GTX 460 Hawk hangs, need help

Hello!
Need help with my MSI GTX 460 Hawk.
Sometimes it hangs and I need to restart my computer and sometimes screen goes black and then windows says that video driver wasn't responding and was recovered.
Computer hangs more often in the 3D game, but in not 3D programms computer hangs too, but no so often.
The temperature is ok, maximum is 70 deg. in 3D game. I even tried to set videocard cooller to 100% and it didn't help.
I did no overclocking or anything like this.
I use the latest videodriver from nvidia's website and the latest directx.
Windows 7 64bit.
Can you help me to solve this problem?

Quote from: flobelix on 25-August-13, 00:21:30
Follow >>Posting Guide<<
If you are really in lack of parameters:
Board: Gigabyte GA-EP45T-UD3LR
VGA: MSI GeForce GTX 460 Twin Frozr II
PSU: Raidmax 500W (22A on 12v rail)
Intel Core 2 Duo 8500 3.16GHz LGA 775
OS: Windows 7 64bit
The problem: Videocard began to hang:
Sometimes it hangs and I need to restart my computer, sometimes I get BSOD and sometimes screen goes black and then windows says that video driver wasn't responding and was recovered.
Computer hangs more often in the 3D game, but in not 3D programms computer hangs too, but no so often.
What I've allready tried:
1. Installed latest drivers from nvidia.com and latest directx.
2. Checked temperature: maximum is 70 deg. in 3D game at 100% load. I even tried to set videocard cooller allways to 100% and it didn't help.
3. Installed MSI Kombustor to burnin test videocard, but I can't catch any hangups with it.
4. Checked windows system log. The last warning after driver recovery message is:
Video driver nvlddmkm wasn't responding and was recovered.
5. Two latest BSODs were caused by dxgkrnl.sys and nvlddmkm.sys drivers.
6. Finally installed MSI LiveUpdate, it shows that no videodriver is installed and wants to download an old videodriver ver. 258.96.
Need help to solve this problem.

GTX 460 Hawk SLi Problem

Hello
I have this "small" problem with my MSI GTX 460 Hawk 1 GiG SLi.. Softwares like 3DMark Vantage and Bad Company 2 just dies/stops/vanishes/crashes in a wierd way... Once you are playing and then it just goes back to desktop like u didnt ever play the game or so.. like *puff*
I have tryed many things to resolve this issue, mostly these common things what u can find from every forum.. reinstal drivers and change power rails and so on... Now i have tryed drivers 258 + 259 (msi recommended) + 260 + 260.93 beta and 3dmark 06 works fine with everyone of those.. But vantage and bad company 2
gives me a problem and i guess some other games also but havent had time to try other games yet..
Tho i got vantage work once when i runned it in vista sp1 mode and 258 drivers.. wierd.. ehh?
I have already tryed so many things to resolve this that i dont have anymore ideas... What can it be? Can it be just a driver problem? I run both cards in 16x slots... Manual says slots 1 and 3 are x16 when sli so... directx is also updated...
My comp specs are these..
I7 930 @ 4 GHz (Stable)
Asus Rampage 3 Xtreme
6 gigs 1600 MHz DDR3
850W Corsair HX850 (SLi Ready)
MSI GTX 460 Hawk SLi
WIN7 x64
What info u guys/girls still need?
Everything worked fine with cpu oc when i runned GTX 275... ofcourse its single card but cpu is stable anyways tested with intel burn and prime95..

Hmmmm...
Looks like @ this point that newest nvidia drivers solved the problem... 260.99... Vantage runs fine... one crash first.. then some driver bug or smth (RTTI crash or so).. but third run went ok and over 31k points... So didnt have to remove any hdd´s or oc to get some more power ^^ thnx anyways for the replys, always great ^^

MSI GTX 460 Hawk Freeze

Hello
problem: GTX 460 Hawk does Freeze on SLI and without SLI (freezes so it doesn't respond to anything at all, only turning pc off can be done)
-sometimes on start up but usually after 0-2 minutes of battlefield bad company 2
-few times didn't get even to login screen on windows.
System:
core i5 750
4gb ddr3 ripjaws
Asus Maximus 3 GENE
corsair 850 watt psu
MSI gtx 460 hawk X2
tried new drivers and also ones on dvd that came with GPUs (older drivers)

Quote from: oldtimes on 14-January-11, 08:10:17
is there some program that could test if card is defective?
MSI Kombustor is good for stress testing. It comes with Afterburner.

Msi gtx 460 hawk upgrade???

had a Gtx 460 hawk since 2011 and now thinking of upgrading what would you recommend? budget of £150 was thinking of a gtx 660 ti want to stay NVidia

price I keep coming with for a gtx 760 is around the £175 (msi geforce gtx 760 oc gaming edition ) will keep looking but thanks for the idea of a 760 would be a good upgrade from the 460

MOVED: SPLIT: MSI GTX 460 HAWK Talon Attack beeps when is not on load.

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=146886.0

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=146886.0

MSI GTX 460 Hawk

Hi,
I have recently purchased and installed this gfx card. Updated all my drivers and cross referenced with MSI Live 4 to make sure my system is as updated as it can be. My comp specs are in my sig
I have had a look at the Afterburner software which triggered my concerns. My stock "out of the box" core clock speed is 675mhz (which is a regular gtx460) as opposed to the suggested 780mhz.
I have done abit of googling and everyone seems to have out of the box 780mhz.
I was wondering if this is supposed to be the case, where the card under factory settings is 675 and the OC'd edition still requires me to overclock it manually via Afterburner? If theres something wrong, is there anything I can do before taking it back to the store for return/exchange?
I am pretty sure that the card I purchased is indeed a hawk as there are labels on the card and did not get ripped off. Also I live in Australia (if that matters).
I would really appreciate any feedback or opinions in regards to this topic.

Quote from: ggCakes on 14-January-11, 12:11:41
hmm, they seem to claim that in certain areas the 460gtx hawk is defaulted at 675mhz and should live with it.
I am quite upset at this "solution", as I did not pay extra money for a hawk only to run it at a normal 460's clock speed
anyone got the vbios updates etc?
It's vary either 780 or 810 ==> http://eu.msi.com/index.php?func=prodvgaspec&maincat_no=130&cat2_no=&cat3_no=&prod_no=2152
You have 675 [e.g. yours vary too much..]
Can you tell the VGA SN?
Quote
anyone got the vbios updates etc?
Apply new desired clock freq. with Afterburner 2.1.0 Beta 6:
http://downloads.guru3d.com/Afterburner-2.1.0-Beta-6_d2604.html
Then go test the VGA and see if everything is working fine

MSI GTX 460 Hawk Talon Attack - no display, cannot get past POST

Just put this thing together. Windows 7 is not installed and the HDD is not formatted yet, but I cannot even make it to the BIOS. Dell monitor works on laptop and with PS3 with both the VGA and DVI port.
Specs:
MB: Gigabyte GA-X58A-3DR
CPU: i7-960
RAM: 4GB DDR3 Adata
HDD: Samsung Spinpoint F3
DVD: ASUS DRW-24B1ST/BLK/B/AS Black SATA 24X DVD Burner - Bulk - OEM
PSU: 900W Continuous Silver
I believe I'm hearing 2-3 beeps on startup, suggesting a no display or video card error. I've tried both PCI-Ex16 slots on the MB with no avail. Two red LEDs on the card itself are on, indicating that it is receiving power. All fans are running, discs will spin in the DVD drive, I'm pretty sure the HDD clicks once or twice on startup. Only thing wrong is that I have no display and I cannot navigate BIOS regardless of whether or not it has successfully loaded.
Tried clearing CMOS with button. Tried both VGA and DVI ports on monitor and card.
Question: Is my card DOA? Or did I miss a step? Or is something else wrong?

I have connected both power cables from the PSU that were labled "PCI-E" to the card. Also, two of the card's LEDs are on after starting up the machine.
I have also recently verified that the memory I have installed is compatible with the motherboard.
It's really frustrating because if I could see the POST error report I might have some idea of what to do

MSI gtx 460 and pale Picture

Hi
I was having XFX 8800 and I just got my new MSI gtx 460 hawk card but I notice that the colors are pale or a little blurred, I am not 100% sure maybe it my eye, is there a way to make sure ?
BTW I dont have someone good with computers near me.
Thanks

I don't know where you would get a new monitor from but this seems to have a very large selection to choose from.
http://www.egprices.com/subcat.php?sub=17&sortby=&sortby=&pageNum_rsProd=0

GTX 460 Hawk - Extreme System Lag Problems, Windows 7

Brand new from Amazon. Along with a new 750W power supply
Windows 7 Pro 64 Inel Duo E6400 with 4gb ram.
I let windows install the card and driver, the computer ran very slow and laggy, games were unplayable. I downloaded the driver from MSI and did a clean install, same thing. I went to NVIDAs website and got the newer driver for the GTX 460 which is 275.33 and it acted the same. The system was so laggy that just tpying into google created a huge weird system hanging lag.
Re-installed Nvida GeForce 8800GTS which I was replacing and it worked fine, no lags, computer ran just fine as before. The 8800 GTS should not outpreform the GTX.
I'm not sure what to do, I opened a trouble ticket on the MSI website, but if they cannot help I'll just have to send it back to Amazon and look for another card. I'd really like to just save myself the trouble and use this one.
Running dual monitors on the DVI white ports. I connected the two power cables to the card.

Ugh ok, its not my computer, its the gfs computer but she was using it.
■CPU brand, model and speed - Intel Core 2 Duo E6300 - 1.86
■Motherboard model - Intel DG965OT - BIOS Intel Corp MQ96510J.15A.0386.2007.1206.0148
■Memory brand, type/speed, size, number of sticks -Kingston - DDR2 - 1024 - 4 sticks
■Video card brand, chipset type, memory size - Video Card installed Nivida GeForce 8800 GTS, the card i was trying is the GTX 460 Hawk
■Hard drive(s) brand, size, type, speed - Western Digtial 600GB
■Any other peripheral cards and devices - No, just keyboard, mouse and headset
■Operating system and version (including if 32 or 64bit!) - Windows 7 Pro 64 SP1
■Power Supply Unit brand and output in watts and DC output (amps) - Corsair Enthusiast Series 750-Watt 80 Plus Bronze

Gtx 460 Hawk downclocks when under stress... what's wrong?

Hi people,
i've received a GTX 460 Hawk, i've been testing it to check if it worked fine and how it overclocks but when i use Furmark to check stability after a while the gpu clock gets to 450mhz...
No driver error, just is gets to 450mhz.
This happens only in overclock, the card works great at stock speeds. Temps are fine, and i've changed the power setting from adaptive to max power.
I've tried latest 290.36 beta drivers and latest whql 285.62 drivers. It does the same.
I'm on a clean installation of Win7 64bit since i got an SSD and re-installed everything, my PSU is a Corsair HW1000Watt that used to run GTX 580 until a couple of months ago, so i think is powerful enough.
What can i try? Thank you in advance.
PS my card has 70.04.13.00.01 bios version (MSINV238MS.115), i've seen that on TechPowerUP! there is a 70.04.2E.00.04 (MSINV238MS.116) version too. do i have to update the bios or is kinda the same?
the MSI Updater won't find any new bios for my card...
PS my specs are:
Intel 950
Asus Sabertooth X58
G.Skill Trident 6-7-6-18
SSD Crucial M4
MSI GTX460 Hawk
Corsair HX1000W

Test using games to see if the same condition occurs. If the card functions properly in games, nothing is wrong and the card is operating properly.
Of course, if you go by the answer MSI Tech Support gave me, their cards are designed to downclock under load....in which case, even if it's trying to render heavy 3D graphics at idle clocks it's operating properly....

GTX 460 HAWK - OC issue

Have anyone running GTX 460 Hawk at above 900 mhz?
I'm using MSI AFTERBURNER version 258.96.
I have to increase my core voltage but every times when I click apply, it goes back to the default of +10.
I have already checked the unlock voltage control, unlock voltage monitoring and force constant voltage.
Did I miss out any setting?

Mine was OK at +70 for 910, wouldn't go any higher than 910 without giving me trouble and didn't need more than +70 for 910. Just start working yours up from original 810 at factory voltage until problems start and then raise voltage till stable again. I found on mine +60 at 875 and then +70 at 910 was max. Yours may OC higher or lower depending on luck of the drw just don't except to get any closer to 1000 than I did. 1000 as said on the box is not a realistic claim in my opinion.

Is there a way to disable dynamic core frequency on GTX 460 HAWK?

I just got Assassin's creed III.
I've noticed the core frequency on my GTX 460's going up and down during game play. When the core frequency drops my frame rate drops also. I have two GTX 460 HAWK's in SLi. Yesterday while runnning AC3 for the first time I noticed SLi wasn't working but a game update this morning seems to have fixed that.
This up and down frequency change could be caused by a bottle neck elsewhere in my system. My Mother board is old.
System is XPS 720 (Dell)
Windows 7 (SP1)
MB - nvidia 680i (all delled to hell)
RAM - 8 Gig - OCZ
CPU - Intel QX6700 (3.2 GHz and doesn't max load during gameplay)
Single (crappy) Asus monitor @ 1920-1080
Accepting the idea of a bottle neck, I'm still curious, is there a way to lock the GTX 460 HAWK's at their max frequency of 780 MHz? Mostly for the purposes of testing.

Thankyou for that instruction. This worked exactly as I had hoped it would by increasing the frame rate and making gameplay smoother. I suspect this will improve issues I've had with other games. I wonder if this will have to be reset back to OFF everytime I update the graphics driver?
It's my opinion that by default this power saving option should be turned off. I just don't understand the idea that someone who buys a high performance video card or cards as in my case (in SLi no less) would want their performance severely reduced to save power. I guess it would be great if I was on a lap top or relying on a generator for electricity or something.
I know someone who recently bought a pre-built gaming rig that had power saving features turned on by default for the CPU. This was causing stuttering and severely reduced performance when in games. When I bought this computer it also had these (two of them) CPU power saving features turned on. Am I the only one who thinks it's common sense to either rid a gaming rig completely of these "features" or at least have them turned off by default?

MSI GTX 460 1 Gb OC & NiBiTor, fan speed mod

A dew days ago, i purchased an MSI GTX 460 1 GB OC graphics card.
This one:
http://hr.msi.com/product/vga/N460GTX-M2D1GD5-OC.html
Problem is, fan is too loud at idle. I've tried using MSI Afterburner but it won't let me
go lower than 40%, which is too much. As Svet is no longer able to mod BIOS (which i perfectly
understand when we look at number of requests he received daily ) i tried to do it myself.
I saved BIOS with GPU-Z and opened it with NiBiTor. I found an option to change minimum fan speed
from 40 to 30. But, problem is that NiBitoR puts red dot at the "integrity" check, immediately when
I open it. Does this means that NibiTor was unable to properly read BIOS information? Does this mean that I can't safely save a BIOS and will damage my card if I try to flash a card with modded BIOS?
NibiTor is version 6.02. My card is MSI N460GTX M2DIGD5
S/N 602-V232-150B1101136247

My e-mail? There is nothing there.
I think that GPU-Z has some problems saving my BIOS. When i use nvflash
saving option (from DOS), Nibitor shines a green dot whan i opened BIOS with it!
I've sent an e-mail with BIOS to Svet, but with the version extracted with GPU-Z. I think
that BIOS was corrupt...

Msi GTX 460 HAWK Beeps Problem Load to Idle

Similar Messages

Maybe you are looking for