MSI GTX 680 TF3 OC 2GDR5 BOTH FANS NOT WORKING

]BOTH FANS OF MY GPU ARE NOT WORKING THEY ARE AT FULL STOP AND MANUALLY ALSO NOT SPINNING THROUGH AFTERBURNER UNLESS I APPLY IT AT MAX 88%  BELOW THAT AND THEY COMPLETELY STOP ALTHOUGH AFTERBURNER IS SHOWING ME THEY ARE SPINNING WHAT CAN I DO IN THIS CASE? PLEASE HELP... WHEN I BOOT THEY SPIN FOR 1 SEC & AFTER THAT THEY ARE COMPLETELY STOP.. MY TEMPS ARE REACHING SKY HIGH . THE ONLY WAY TO USE IT BY RUNNING THEM AT 88% ALWAYS MANUALLY? BELOW THAT AND BOTH FAN STOPS.. PLEASE HELP :s

I see.
You can either find replacement fans online, or buy aftermarket cooler for GPU. Or as last solution: find a broken card that will cost not much, but it and replace heatsink with fans.
Or ask MSI, maybe they can redirect you to some store with fans:
>>How to contact MSI.<<
Also did you try to reinstall Afterburner? And are you able to test the card in different PC?

Similar Messages

  • MSI GTX 680 Lightning - No Signal/100% Fans

    Hi, I recently built a computer, which contains an MSI GTX 680 Lightning. This is the first time I've built a computer so don't kill me if this has a simple solution.
    The computer ran fine for a few months, then all the sudden I started getting a recurring issue where both my moniters show "No signal" and the 680's fans turn up to 100%, it stays like that and I have to reset the computer, after which it seems to run fine for a while and then it happens again unexpectedly.
    The issue seems to happen more frequently when I'm playing games, but it also happens when I'm not even at the computer. Also, I haven't updated any drivers or anything recently so I don't think it would be that. This is pretty annoying, so any help would be appreciated.
    ~Thanks.

    can you list full system specifications? read >>Posting Guide<<

  • MSI N470GTX Twin Frozr II both Fans not working

    I bought GTX 470 Twin Frozr II several year back
    now the fans stopped working (not spinning at all)
    I've cleaned the dust and did everything
    can I get new fans for the card (My card is OUT OF WARRANTY)
    how much new fans cost???
    can anybody tell me????

    fisrt one fan stopped working and later the other
    i touched them and both FANS were too hot to touch
    cable connections of both fans are fine
    sometimes they spins but with very low RPM 200~400
    few months back both fans were very free to move (i tried spinning with my hand when I was cleaning the card) now they are hard to spin like dust is inside the motor of the fan (I know fans are not of use anymore) 
    I already know about Arctic twin turbo II but i'm not spending that much money (I live in INDIA so the shipping charges are about 10$~13$), 65$ heatsink + 12$ shipping = 75$~78$   
    I want just fans not entire heatsink 

  • MSI GTX 680 fan automatic speed problem

    Hi guys..first sorry for my bad english..
    I buy today MSI GTX 680 and I have problem with automatic fan speed...i had GTX 570 TF and that was working perfect but with GTX 680 I have weird problem, when GPU temperature goes up, fan RPM speed goes down 
    Screenshot:
    Now I disable auto speed and set speed manually, but that's not best solution becouse I must manually set higher speed when i want play BF3, Call of duty MW3 etc...
    Anyone know what is problem?
    I update GPU drivers, MSI afterburner ( 2.2.0 ), chipset drivers...
    Thanks!

    Fans or other spare parts aren't sold separately. If your vga is still covered by warranty contact MSI if seller refuses rma: >>How to contact MSI.<<
    That of course means the vga needs to be rma'ed. Alternatively you can use an aftermarket cooler like Alpenfoehn Peter, Prolimatech MK26 or Accelero Xtreme III

  • Msi Gtx 680 Twin Frozr, cold boot noise

    So about 3 out of every 10 times I turn on my computer, it sounds like one of the fans running at full speed or something, it's very loud.
    I dont know what it is . Its like rattling noises, grinding noise only on cold boot. When Windows start then all is quiet. I think its from graphic card.
    Sometimes all is quiet when i boot pc, sometimes not. Its very rarely , and only when i booting pc and when windows start all is quiet.

    Quote from: xmad on 16-October-12, 23:01:43
    Perhaps some clarification is in order.
    Is the fan spinning at full speed sometimes or making funny noises like the fan isn't spinning correctly.
    You have two entirely different discriptions going on here. Running a full speed is one thing, grinding or vibration noises are another.
    While it is working correctly use afterburner to increase the fan speed to 100%, there shouldn't be any rattling or grinding or anything. Same thing at start-up, they may goto 100% in reverse to clear dust, but they shouldn't grind or rattle.
    You say: "Same thing at start-up, they may goto 100% in reverse to clear dust, but they shouldn't grind or rattle."
    But Msi Gtx 680 Twin Frozr III dont have that feature.   <--- I have that card.        Only Gtx 680 Lighting got it.

  • Need manual for MSI GTX 680 Lightning

    I recently purchased a MSI GTX 680 Lightning card, but the cd that came along was faulty, I cant open the pdf manual. I have contacted the shop I purchased the card from but they cannot get another cd for me. From where can I download the manual?
    Great card btw, I just want to read more about the card details.
       /Peter

    as flobelix said vga manuals doesn't have much.
    but you can use nvidias official pages for the more information.
    http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-680

  • Sudden video crashes/black screen flashing with MSI GTX 680 + MSI GT 640 (PhysX)

    I've been running an MSI GTX 680 Lightning + MSI GT 640 (dedicated PhysX) setup since last September with excellent results. Most of my Steam games would crash in less than 10-15 minutes before I added the 640.
    Just this week, however, I've noticed a new and different problem. While playing several different games, the monitor randomly flashes black, then the game stutters and finally my whole system crashes. I've never seen this before. The only thing that seems to correct the problem is to scale back the resolution from 2560x1600 to 1920x1200 or even 1280x800.
    The problem seems to be getting worse. Now, while doing anything on my PC, the system freezes briefly, the screen rapidly goes black, then turns back on and system unfreezes. This happens 3-5 times in a cycle then stops. The cycle repeats every few minutes and happened twice while typing this post.
    I've got the latest graphics and other component drivers installed. All diagnostics say the video cards are working properly, but these problems persist.
    Are these indications of failing video cards? Any/all suggestions appreciated.
    My system specs: MSI GTX 680 Lightning 2GB, MSI GT 640 1GB (dedicated PhysX), i5-2500K, Asus P8Z77-V, Coolermaster V8, 16GB Corsair Vengeance 1600, 4TB storage, Corsair HX1000, Dell 3008WFP, Windows 8 Pro 64-bit.

    First of all remove the GT640 so we can check if the issue is solely related to the GTX680. Then monitor temps in load and idle using Afterburner (>>How to use MSI Afterburner<<)
    If problem presists when not using the GT640 remove current drivers in safe mode using >>Driver Fusion<< and install latest MSI driver (http://www.msi.com/product/vga/N680GTX-Lightning.html#/?div=Driver&os=All). Yes, I know that driver is older than Nvidia one but it is a surely working one with the special MSI design and features.

  • UEFI GOP VBIOS FOR msi gtx 680 2gd5 oc

    please give me uefi gop vbios for my msi gtx 680 2gb ddr5 oc edition
    my serial number is:  602-V282-020B1207004911
    my current bios : https://drive.google.com/file/d/0B_KiUr-zaS6xM2NJQ0loRExXT3c/edit?usp=sharing

    Use the attached vbios.
    Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
    Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
    To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
    Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

  • MSI GTX 680 Lightning OC problem

    Hi,
    Im hoping i can find some help here. Im having this kind of problem: if i OC my card drivers will crash after few min of playing/benchmarking. Card is only stable with Pre OC setting. tested with 306.23 whql drivers and with 310.70 whql drivers.
    Temps are fine about ~50c all to time. i have this "new" card and im using normal bios. Card is only 2 days old
    Windows 7 x64
    i7 950@4,2 Ghz
    MSI GTX 680 Lighthing
    12 GB g.skill 1600 mhz ram
    Thermaltake toughpower 1200 w

    Quote from: zbychu222 on 15-January-13, 08:20:52
    this card is made for overclocking please you think im not raise gpu voltage again please dont give me that stupid (no offence) answer
    if someone buy  680 lighting   i think he now what he bought sorry for english
    Did your post mean for me? I was replying Zhoti's post and not yours .... Zhoti said he had unstable while adding +50mv and he didn't say about adding GPU volt so I assumed that he didn't add volt and I told him to add voltage  no offence OK? Also sorry for my English language  (I'm not quite good enough in English).
    Froggy Gremlin was right, I think you're starting hijack this thread, you may make/start your own thread if you want to.

  • Msi gtx 680 4gb waterblocks

    what waterblocks can I absolutely fit on my MSI gtx 680 4gb?
    looking for an answer from a MSI rep or someone who has personally fit a block on this specific card (yes i'm aware of the ek cooling config site, i'd rather not use EK if possible)

    If you are looking for MSI tech answer ask MSI: >>How to contact MSI.<<
    None the less this is a custom PCB design and no full cover water block is offered for that.

  • Cooling fan not work correctly

    my computer says the cooling fan not work correctly plase visit www.hp.com.go/teachcenter/startup

    Dear Customer,
    Welcome to HP Support Forum and we are glad to assist you
    It looks like you are having difficulties with regards to the Cooling Fan of your Netbook
    We will surely assist you with this
    According to the message you have posted I suspect this is purely a hardware issue where in your getting "System Fan(90B) - The system has detected that a cooling fan is not operating correctly" message. This is a mechanical fault and the Cooling Fan on your Notebook and needs to be replaced before the Notebook starts up with an Overheating Issue.
    Causes/Reason for this Issue:
    1. Sometimes this is just because of Dust, Pet Animals Hair slowing down the fan
    Perform the  below shown troubleshooting steps:
    Step 01. Turn OFF the Notebook
    Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
    Step 03. Press and Hold the Power Button of the Notebook for a full minute
    Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
    Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
    Step 06. Once you get to the BIOS, Please press F5 Key to load setup defaults for the BIOS
    Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
    Step 08. Now please wait till Unit loads Windows and then Shut down the Netbook again
    Step 09. You should clean all the Vents and Openings really good with a can of compressed air
    Note: If you are still getting the same error we need to replace the fan
    I strongly recommend you to immediately Contact HP Technical Support over the Phone for further assistance without any delay to get your Netbook Fan replaced and serviced by an authorized HP Certified Engineer
    You can also Check your warranty Here to verify the warranty status
    Hope this helps, for any further queries reply to the post and feel free to join us again
     **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • HP ProBook 5220m Fan not working with battery power but work fine with adapter plugged in

    Hi,
    Any one have this issue?
    HP ProBook 5220m (Bios Version F50) Fan not working with battery power but work fine with adapter plugged in.
    This issue was found in my replacement motherboard. the original mother do not have this issue.
    The origianl mother to be replace is due to can't power on after a power failure recovery. I believe was due to power surge killed the motherboard's power controller circuitry.
    Appreciate any one can provide clue for resolving the problem.
    I have tried to install speedfan to try my luck, but it can't any fan in the application to configure. (Bios Version F50) 

    @wheng 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Horrible fps problems, fans not working

    Hi,
    Whenever I play League of Legends on my 15 inch retina macbook pro, the game starts out smoothly with a consistent 60 fps.  However, after a certain period of time, the fps severely drops to about 5.  It never used to do this, but now it happens consistently.  Also, the fans have not turned on in months; they used to always be on whenever I played League, but they seem to never turn on anymore.  Could the fps problem be related to the fan not working?  Please help, and thanks! 

    Sargeraspa,
    Lenovo G770 has ThinkVantage System Update? I thought that is suppose to be for ThinkPad system only?
    Go to the link below and Select Win 7.
    http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?DocID=HT072970
    Then update the BIOS and Energy Management driver.
    *Non Lenovo employee*
    I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

  • Win 10 Fan Not Working

    Updated To windows 10 Fan Not Working Error At BootUp ..
    Coolsense Is installed...

    If after reinstall, issue persists, have a look at this Answer given in the other forum. It might be your answer too...........
    http://answers.microsoft.com/en-us/windows/forum/windows_tp-windows_store/unable-to-launch-windows-apps/2c6ac3c1-fc6f-489c-893e-9e6d3b028c03?page=1

  • CPU Cooling Fan not working

    Hi,
    CPU Cooling fan not spinning and showing error on startup saying fan not working properly.MY HP Pavilion G6 laptop's Product number: B0P25PA#ACJ and Serial number: [edited by Moderator]. I want to replace the same. Can anyone tell me which model of fan would be appropriate?
    Thnks in advance.
    Thanks,
    PSantra

    Hi @Psantra ,
    Thank you for visiting the HP Support Forums. I'm sorry to inform you that your post has needed some editing to remove personal information such as the Serial Number in your Post. From our Rules of Participation:
    Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
    If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
    Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
    Thank you
    George
    I work for HP

Maybe you are looking for

  • Calling report from form with lexical parameter

    hi DECLARE      repid REPORT_OBJECT;      v_rep VARCHAR2(1000);      rep_status VARCHAR2(20); BEGIN           repid := FIND_REPORT_OBJECT( 'REPORT34' );           set_report_object_property(repid,report_other,'p_SEASON_YEAR='||:SALE_ORDER.SEASON_YEAR

  • Calling Report From Form To Many Destinations

    Hi I am calling reports from forms using SET_REPORT_OBJECT_PROPERTY and then run_report_object. I dont know the destination until runtime of the report which is ok as I can pass this in via my procedure, but if that destination is many ie mail and fi

  • How to use objects from other SWCs in my BPM Integration Scenario

    Dear all, I am experiencing some difficulties with the following. I have created a BPM Integration Scenario in a SWC. It contains a tranformation step in which a message from that SWC is split and mapped to two IDOCs. These IDOCs are imported in anot

  • Wireless-g router?

    My router is working fine in every way but causes loud static on the telephone lines. Any suggestions for eliminating this problem?

  • Windows 2008 Standard SP1 will Support MS SQL Server 2008R2 Enterprise Edition ?

    Dear , Currently we are running MSSQL Server Enterprise 2008 Edition on Windows 2008 Standard Edition 64Bit (.Net 3.0). Now we are upgrading the MSSQL Server to 2008R2 Enterprise with SP2. Will it support to upgrade on the same OS or do we need still