Msi Gtx 680 Twin Frozr, cold boot noise

So about 3 out of every 10 times I turn on my computer, it sounds like one of the fans running at full speed or something, it's very loud.
I dont know what it is . Its like rattling noises, grinding noise only on cold boot. When Windows start then all is quiet. I think its from graphic card.
Sometimes all is quiet when i boot pc, sometimes not. Its very rarely , and only when i booting pc and when windows start all is quiet.

Quote from: xmad on 16-October-12, 23:01:43
Perhaps some clarification is in order.
Is the fan spinning at full speed sometimes or making funny noises like the fan isn't spinning correctly.
You have two entirely different discriptions going on here. Running a full speed is one thing, grinding or vibration noises are another.
While it is working correctly use afterburner to increase the fan speed to 100%, there shouldn't be any rattling or grinding or anything. Same thing at start-up, they may goto 100% in reverse to clear dust, but they shouldn't grind or rattle.
You say: "Same thing at start-up, they may goto 100% in reverse to clear dust, but they shouldn't grind or rattle."
But Msi Gtx 680 Twin Frozr III dont have that feature.   <--- I have that card.        Only Gtx 680 Lighting got it.

Similar Messages

  • MSI GTX 680 Twin Frozr III OC edition

    Hey guys,
    First post and I know it's a bit of a long shot but does anybody know where I can get one of these cards.
    Have one already and have been very happy with it so I want to go SLI.  Don't want to buy a new 780ti or whatever as I know I can get a cheaper 680 and get the same if not better performance by going SLI with what I have.
    I know you can mix and match brands but I really want 2 of the same.  Have looked on Ebay and they do pop up now and again but just wanted to know if anybody has any ideas, or even has one in a box that is unused.
    Thanks
    Ian

    GTX680s are out of producation for quite a while. ebay is your only hope so far. Shops that still have GTX680s are often selling those at totally insane prices. A 780ti would be a better idea. SLI strongly depends on driver and SLI profile support and may feel laggy despite high fps. One high-end gpu is always better than two lower classed cards in SLI. 

  • MSI R7970 Lightning vs MSI GTX 680 Twin Frozr III OC 2 GB

    Hey
    I am looking to finalize my new build, however I am having a hard time deciding between these two cards. I will be doing some overclocking of course:)
    Which path would you recommended, AMD or nVidia?
    Thanks!

    GTX680s are out of producation for quite a while. ebay is your only hope so far. Shops that still have GTX680s are often selling those at totally insane prices. A 780ti would be a better idea. SLI strongly depends on driver and SLI profile support and may feel laggy despite high fps. One high-end gpu is always better than two lower classed cards in SLI. 

  • Help flashing UEFI bios for my GTX 680 Twin Frozr III 2GD5/OC

    Hi,
    I am very new to flashing graphics card bios, so i need some instructions as to how to update my bios to the latest UEFI GOP version. I am using a Z77 platform with Windows 8 Pro and I'm looking forward to the super fast boot times
    Here is my current bios file: **http://www.filehosting.org/file/details/434943/GK104.rom**
    Here is my serial number: 602-V282-020B1205147435
    My model: MSI GTX 680 Twin Frozr III 2GD5/OC
    Thank you

    I have followed the steps you said, but had a few hiccups on the way:
    1) when i was flashing the rom, i was told in the command line dialog box that the pci vendor identification/verification was mismatched, i was prompted to override verification and i pressed "y". Is that ok ? In total, i had to press "y" 2 times as opposed to once as said in your instructions.
    2) After flashing bios, I restarted and disabled CSM (compatibility mode) support. My PC booted fine and i reached the lock screen. But when i entered the password, I was introduced to a black screen with only the cursor showing over it. Then my pc crashed with the error IRQ_NOT_LESS_THAN_OR_EQUAL_TO
    3) I restarted and logged back again, but was introduced to the same black screen again, but i could gain access to the control panel with CLT+ALT+DEL and it was filled with error reporting tasks. I restarted the third time and finally could log back in without any crashes or black screens, but windows came up with a prompt that it had run into an error and needs to report it.
    I am suspecting that it had something to do with the driver or the verification.
    PLEASE HELP. Thanks

  • MSI GTX 670 Twin Frozr

    MSI GTX 670 Twin Frozr fan seems to make a fast clicking noise when not under load or cold.  Have to start up something that's graphics intensive to get it to stop.  This clicking noise starts a few seconds after dust off.  Anything that I can do from here?  Still under warranty.
    Great card otherwise. 

    check if the VGA FANs are touching something

  • Msi GTX 560 Twin Frozr II - Problem

    Hey folks,
    Im having a problem with my Msi GTX 560 Twin Frozr II video card.
    I can't make it work with my monitor, all I get is "No signal detected"
    I know the monitor is fine, because I used it as it worked all good when I plugged it into
    my laptop. It's a BenQ G2222HDL monitor btw. It has one VGA (D-sub) and one Dvi-D input.
    So i've tried all types of cables (VGA, Dvi-D and even Hdmi cables), and
    still, can't get no signal. What can I possibly do to make things work?
    Also, my computer acts a bit wierd when it's starting up. Usually, I would turn it on, then it would turn itself off really quick. Then I turn it on again,
    and it goes just fine and runs smoothly. After I changed the position of some RAM modules
    and such, it changed. Now when I turn it on, the fans spin for 1 and there's just a tiny bit of noise until
    it turns itself off. Then I turn it on again, and it goes just fine with all fans and stuff spinning.
    So, I really need some help!

    Cpu - Intel i5 2500k, 3,3GHz, Socket LGA1155, 6MB with Noctua DH-14 CPU Cooler
    Motherboard - ASUS P8P67 PRO, Socket-1155, ATX, P67, DDR3, 3xPCIe(2.0)x16, CFX& SLI, SATA 6Gb/s, USB 3.0, FW, BT, EF
    Memory - Corsair XMS3 DDR3 4GB 1600MHz CL 9 (2x2GB kit)
    Video card - MSI GeForce GTX 560Ti 1GB PhysX, PCI-Express 2.0,"Twin Frozr II", GDDR5, 2xDVI, native-miniHDMI, CUDA, 256bit (GF 114, overclocked to 880 Mhz on the core), (Marketing name; N560GTX-Ti Twin Frozr II/OC)
    Harddrive 1 - Crucial Real C300 (64GB - 355/75 Mb/s read/write) SSD
    Harddrive 2 - Samsung Spinpoint F3 7200RPM, SATA 3.0 Gbps, 3,5", 16MB Cache, 8.9ms
    Chassis - Fractal Define R3 Black Pearl Mid tower chassis (ATX, mATX, mITX) with two 120mm fans
    Power Supply - Corsair HX Series 750 Watt Modular 80 plus silver (ATX 12v 63 amp)
    Haven't got a chance to install os, but will install Windows 7 64Bit.
    The monitor is a BenQ 21,5" LED G2222HDL (1920 x 1080, 5000000:1, 5ms, VGA/DVI-D)
    More background info; I build the computer myself. Everything went mostly fine, except for that I had to spend quite a long time to get everything right.
    I started the machine, and it all went just fine (except for rebooting and then running smoothly, as it has done ever since). I did the MemOK! test and everything seemed to be fine. But when using the VGA cable that came with the monitor, I couldn't get any signal detected (I used a VGA to DVI adapter to plug the VGA cable into the Msi 560 TI videocard). I used 2 different adapters, but nothing happened. I tried with a HDMI cable, just to test, and that did not work either. Then, I figured out I should order a DVI-D cable.
    So I ordered the cable, and went on to plug it into my monitor and my video card, no adapters needed. Still, no signal at all! Tried a different monitor to check if it was the monitor's fault. Nope, still no signal. Frustrated, I used the VGA cable again and tried to plug the monitor into the laptop, which worked just fine. A clear, bright image appeared. But not with my desktop computer with the Msi GTX 560 Twin Frozr II. Nothing works when I plug in the cables etc. No signal at all, although the computer itself seems to run just fine with fans spinning up and the different components making noise etc. Thus, I figured out there probably was something wrong with my Msi Geforce GTX 560 TI Twin Frozr II. Now I dont really know what to do.
    Does anyone have an answer/advice/possible solution to my problem? I'm getting a tad frustrated now, seeing as I bought this computer 2 weeks ago and still haven't got to use it yet.

  • MSI GTX 770 Twin Frozr 2GB OC Bios question

    I got the MSI GTX 770 Twin Frozr OC 2gb version and would like to know how to verify if I have the newest bios for the gpu.
    This is the newest version listed on the website : http://www.msi.com/product/vga/N770_TF_2GD5OC.html#download
    And thats an ss from GPU-Z, cant find the exact bios version in that downloadable zip from msi website and i cant seem to find the date created for the bios I have on my card now.
    Having some problems with gpu load drops and microstuttering, so wondering if a bios update might sort out my problems.

    The vbios on MSI site is a different vbios series (NV282MS.331) and older than your current vbios. Your vbios (NV282MS.352) is dated 06/18/13 while the one from MSI site is dated 06/11/13. Both are legacy vbios versions (no GOP support). You can try the latest hybrid vbios (GOP support) which is NV282MH.351. It is attached.
    Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
    Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
    To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
    Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

  • MSI GTX 560Ti TWIN FROZR II 1GB GDDR5

    Currently I'm experiencing a problem where no matter what I'm doing, whether it is gaming or browsing, green/orange chequered squares appear exactly as in the picture below:
    The problem lasts for a matter of seconds and then windows informs me that the drivers have recovered from a failure. This is very remininsant, but not identical, to when I had a 9800GT that died. This issue has only started within the last month and the card is over 6 months old. Is this likely to be a GPU issue?
    M4N72-E Windows 7 64 Bit Phenom II X4 950 3.0Ghz
    Kingston Hyper-X 1066Mhz CL5 8GB @ 800Mhz CL4
    MSI GTX 560Ti TWIN FROZR II 1GB GDDR5
    Inno3D GT240 512MB GDDR5 iChill
    Sony AD-7240S 24x DVD±RW DL & RAM SATA Optical Drive - OEM Black   
    Seagate ST3500418AS 500GB Hard Drive SATAII 7200rpm 16MB Cache - OEM   
    Thermaltake 500W PSU

    Sadly I've no way of testing the card in another PC or a different PSU.
    What is the likelihood that it is the PSU even though the card has been performing flawlessly for almost a year? Also I could understand if it was causing artifacts just when gaming due to power load, but it happened when I was merely surfing the net, where power draw doesn't even reach 300W.
    Is a known solution to this issue an increase in Watts or is there a chance that it is a problem with the GPU?

  • My MSI GTX 760 Twin Frozr 2GB DDR5/OC always reboot ...

    Hello
    I have brand new PC with MSI Z87-G45 and MSI GTX 760 Twin Frozr 2GB DDR5/OC detail can see in my signature, every time i start some game ( such as :
    Simcity 2013, Watch dog, Metro Last Light, Company of Heroes, and others ... ) with graphic setting in medium, high and ultra level, Game Just stops, blank and i get my pc reboot automatically.
    I have tried to upgrade geforce driver to : Version 340.52 and nothing changed.
    Anyone can help me with this ?

    I downgraded into MSi Nvidia Graphic Driver 331.65 and do some test with games ( SimCity 2013, Watch Dog, and BF-4). Setting Graphic detail can only set to low level  , I mean if setting push to medium or high mode, my rig suddenly reboot.
    Btw i have tested also in different os with Win7 64 bit Pro, reboot appeared also.

  • MSi GTX 760 Twin Frozr Gaming on B85M-P33 MoBo

    Hello all,
    could someone tell me what I have to do? The MoBo doesn't find the GTX when I plug it in.
    *Updated the bios
    * reconnected
    *Recabled
    Nothing seemed to work. My old graphics card is found without a problem.
    Is it even compatible?
    Cheers, Luuk

    I'm terribly sorry, totally forgot about it.
    Board: MSI B85M-P33
    Bios: Version 4.3 (newest)
    VGA:   MSI GTX 760 Twin Frozr Gaming OC
    PSU:   CX500M (38a 12v rail)
    Intel Core i5-4670K 3.4GHz
    MEM: Crucial Ballistix Sport 2x4GB DDR3-1600 RAM
    HDD: Samsung SSD 840 EVO 250Gb and Western Digital HDD WD10EADS 1TB SATA
    COOLER: Corsair CWCH100 Water Cooler
    OS: Windows 7 64bit Home Edition
    Couldn't test the card in another pc.

  • UEFI GOP request for GTX 680 Twin Frozr iii OC

    I'm interested in getting a UEFI bios for my 2GB GTX 680 Twin Frozr OC.
    Serial number is 602-V282-080B1210047538
    Current bios is listed as 80.04.47.00.39 (P2002-0000). I saw from the instructions that I was supposed to upload my current bios, but I can't seem to either make an attachment or post an external link. Let me know if you need it and I can post a link to copy.
    Thanks in advance!

    Is this BIOS image suitable for my card?
    S/N: 602-V282-080B1303004631
    Code: [Select]
    NVIDIA Firmware Update Utility (Version 5.134)
    Adapter: GeForce GTX 680      (10DE,1180,1462,2821) H:--:NRM B:01,PCI,D:00,F:00
    The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
    Identifying EEPROM...
    EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
    Reading adapter firmware image...
    Image Size            : 182272 bytes
    Version               : 80.04.47.00.39
    ~CRC32                : 6A63B966
    OEM String            : NVIDIA
    Vendor Name           : NVIDIA Corporation
    Product Name          : GK104 Board - 20020000
    Product Revision      : Chip Rev   
    Device Name(s)        : GeForce GTX 680
    Board ID              : E10C
    PCI ID                : 10DE-1180
    Subsystem ID          : 1462-2821
    Hierarchy ID          : Normal Board
    Chip SKU              : 400-0
    Project               : 2002-0000
    CDP                   : N/A
    Build Date            : 06/29/12
    Modification Date     : 07/27/12
    UEFI Support          : Placeholder
    UEFI Version          : N/A (Placeholder)
    UEFI Signer(s)        : Unsigned
    Sign-On Message       : NVIDIA GeForce GTX 680
    MSINV282MS.114

  • UEFI GOP BIOS Request MSI GTX 660 Twin Frozr III

    Hi,
    Requesting GOP UEFI BIOS for Msi GTX 660 Twin Frozr III
    S/N: 602-v287-04sb1210112009
    VBIOS: xxhttps://www.dropbox.com/s/1eccbxdh2ysw5rp/GK106.rom?dl=0
    Thanks a lot

    Quote from: Svet on 19-March-15, 01:07:05
    use this one
    https://forum-en.msi.com/index.php?topic=251786.msg1447440#msg1447440
    Thank you! it works)

  • Is MSI GTX 580 Twin Frozr II/OC's pcb 100% reference???

    So like title says... is msi gtx 580 twin frozr ii/oc 100% reference design???
    If yes, will I be able to install aftermarket cooler like Arctic Cooling Accelero Xtreme Plus with Arctic Cooling (VR004) kit???

    Quote from: Krzychu23 on 23-February-11, 08:29:48
    and one more question...
    like others i have problem that default volts are to low and driver crashes from time to time during heavy loads
    can i get modified bios update so even if i dont run apps like afterburner my card wont crash
    i would like to have default bios setting as i have now cuz its 100% stable
    850/1700/2200 @ 1.050v
    your vga sn is...?
    your current default clocks are...?
    your target clocks are...?
    target new voltage is..?

  • MSI GTX 580 Twin Frozr 2/OC Problems

    Hey guys, I just build my second new(er) computer (specs below, system 2), with this MSI GTX 580 Twin Frozr 2/OC, and I am having several problems. The first problem I noticed was was in Starcraft 2, I was having major texture stretching (looked like units were stretched across the map, exc.), so I tried a new driver to no avail. I delt with that problem and played for several hours to find that the screen turned black, then recovered (happened several times), which I was able to continue playing after. I went ahead and tried Battlefield Bad Company 2, and noticed the same texture stretching, but with big black shapes (almost looked like large artifacts), so I checked the temps, 74c, so that was not the problem. I continued playing for about 5 minutes before the screen went black, turned white, and the game became unresponsive. Thinking it was a possible PSU problem, I moved the card to my first system (specs below, system 1), and produced the same results.
    Does anyone have any ideas, or is it time to RMA the card. Sad thing is, I am seeing alot of people having problems with this card, I hope MSI didn't do me wrong here.... :(
    P.s. I flashed the newest BIOS for the VGA and the MoBo.

    Quote from: doubleohseven on 12-September-11, 06:45:32
    Unfortunately it has, and the artifacting only seems to get worse as time goes on (if the card/game doesn't crash right away that is...). I guess RMA'ing is my only option at this point, thanks for your help.
    I'll chock it up to a defective card this time, but seeing all the problems with these similar cards from MSI is making me worried... I only hope MSI didn't do me dirty with this product.
    No worries, call msi at +1.626.271.1004 within regular business days and they will take care of it

  • MSI GTX 580 Twin Frozr II/OC

    Hi Svet
    is that still the latest bios for a MSI GTX 580 Twin Frozr II/OC ?
    The GF110.rom ?

    I asked before in this thread -> https://forum-en.msi.com/index.php?topic=159374.0
    Its the same card im using so i didnt see a reason to open a new thread and i didnt want to create more clutter for a small question.

Maybe you are looking for

  • Health kit not working in Iphone-5

    I am using I phone-5 with IOS-8.1 but the default Health app is not showing any result on my dash board inspite of enabling them. Do i need any third party app to support, Where in Iphone-5S it is working properly without any third party app. Can any

  • Unplanned delivery costs in MIRO

    Hi, In what scenario we use "Unplanned delivery costs" in MIRO. We created the Purchase Order and did the goods receipts. At the time of Vendor Invoicing, we came to know that we forgot to enter freight value in the Purchase Order. We don't want to r

  • Blurry Font problem

    Ever since I downloaded Acrobat Reader version 9.1.2, I have the following problem about 75% of the time:  whenever I open an Adobe file, it comes up in a font which is, for want of a better description, blurry.  It makes it much more difficult -- an

  • Hide link to SAPguiDetails from completed task list in UWL

    Below is the code I have in XML file to hide links to SAPGuiDetails. <Action name="launchSAPDetails" handler="SAPMiniAppLauncher"> <Properties> <Property name="display_order_priority" value="uwlExcludeFromPreviewDetail"/> </Properties> </Action> This

  • How do I get recordings onto my computer with MediaMonk

    I'm using MediaMonkey as my media manager and I have some recordings on my Vision: M that I want to put onto my computer. Problem is, when I try to move them, it tells me that it can't find the files. How do I get them on my comp?