MSI GTX 960 Gaming 2G 6-Pin to 8-Pin PEG Cable

I planning to get a MSI GTX 960 Gaming 2G. My PSU is 470-watt and only comes with a 6-Pin PEG cable. The power connector of the graphic card is a 8-Pin PEG. And MSI does bundle with a 6-Pin to 8-Pin PEG cable right?
My concern is the 6-Pin to 8-Pin PEG cable. If I'm using this adapter, any issues or performance degrade?

My workstation is a HP Z400. The PSU model is "DPS-475C8-1 A" from HP. And manufactured by Delta Electronics.
Max. Combined Power on +3.3V & +5.1V: 110W
Max. Combined Power on +12V (D, B, CPU): 456W (38A)
Max. Combined Total Output Power: 475W
Thank you

Similar Messages

  • MSI GTX 960 GAMING VS MSI GTX 960 GAMING 100ME

    Hello,
    What is the difference between MSI GTX 960 GAMING 2G GDDR5 and MSI GTX 960 GAMING 100ME GDDR5 ??

    Quote from: aatish579 on 08-May-15, 11:17:56
    Does this card is supported on MSI H81m-p33 board?
    it should be if you update the BIOS to the latest available (1.9) and have used the BIOS + ME update on it!

  • MSI GTX 960 GAMING 100ME new BIOS

    I’ve bought MSI GTX 960 GAMING 100ME and I have question about BIOS of this card. Some time ago MSI announced that the’re releasing a new BIOS for GTX 960 increases clock speeds. New default clock speed are set at 1241 MHz default (1190 MHz old), and boost closk are set at 1304 MHz against 1253 MHz old bios.
    http://www.computerbase.de/2015-02/msi-geforce-gtx-960-gaming-erhaelt-neues-bios/
    I got card with older version of bios and for now MSI has not yet provided the new BIOS file to download. I know that cards with new bios are in stores. Example:
    http://www.hwbox.gr/content/369-msi-gtx-960-100-million-edition-review-page16.html
    I know that I could use MSI Gaming APP which on OC Mode will give me 1241MHz and 1303 MHz at Boost. But I don’t like this software. I’m using LCD profile created by Spyder 3 Elite, and MSI Gamming APP disabling my profile, and I have load it up manually. So this software sucks.
    So, when new bios will be available for download?

    Sorry, cannot help to answer this 
    However: provide your current vBIOS (use GPUz to make copy of it) and S/N of the card.
    Little GPUz guide:
    Maybe Svet knows a bit more about this..
    If he doesn't have latest vBIOS that was, apparently, announced by MSI, then you have to wait for their answer.

  • MOVED: MSI GTX 960 GAMING VS MSI GTX 960 GAMING 100ME

    This topic has been moved to GAMING Graphics Cards.
    https://forum-en.msi.com/index.php?topic=255407.0

    My workstation is a HP Z400. The PSU model is "DPS-475C8-1 A" from HP. And manufactured by Delta Electronics.
    Max. Combined Power on +3.3V & +5.1V: 110W
    Max. Combined Power on +12V (D, B, CPU): 456W (38A)
    Max. Combined Total Output Power: 475W
    Thank you

  • Problem with MSI GTX 960 GAMAING 4G graphics card - Please help

    So I just bought an MSI GTX 960 GAMING 4G graphics card. My problem is that it seems to randomly decide when it wants to run fine at 1215 MHz, and when it wants to downclock to around 135 MHz. Today for example, I was playing Witcher 3: Game was running fine (~55 FPS) for a few hours because the card was performing at maximum. Then, out of nowehere, I dropped to about 4 FPS. I checked Afterburner, and the core clock went down to 135 MHz, while I was still in game. The card is not overheating during gaming. I have the fans set to 35% speed at all times and the GPU never got hotter than about 50c.
    I have the latest nVidia drivers installed. I even tried an earlier set of nVidia drivers and the same things happened. Also yes, it is firmly seated in the PCI-E slot and yes, the power cable is firmly plugged in.
    PC Specs:
    Intel Core i5 Devils Canyon
    Gigabyte GA-Z97N-WIFI mobo
    GSkill Sniper 16GB RAM
    MSI GTX 960 GAMING 4G graphics card
    Antec EDGE 550w PSU
    I understand these newer graphics cards have power saving settings built in, but I have my nVidia control panel settings to "Prefer maximum performance" and it doesn't seem to help. It seems my card is putting itself into power saver mode at will. I suppose my PSU could be the culprit even though the recommended PSU is only 400w, and I have 550w. Any ideas?

    So it turns out I wasn't running the latest BIOS for my motherboard. I updated my BIOS and cleared CMOS. Everything was running fine for a couple hours. I was playing Witcher 3 at full clock and memory speed. GPU temp was hovering around 62 deg c at 60 FPS. Then after a couple hours, the game crashed. Rebooted my computer, and now I am back to the same issue where the card won't run at full speed in a 3D application. Even ran the Valley benchmark tool again and the card didn't increase speed to compensate.
    Do I have a defective card? If so I will get it replaced from Newegg.
    Also I don't know if I am running the latest vbios. GPU-Z says I have 84.06.14.00.F3
    If there is a newer vbios, I can try to update and see if that does anything. I will try anything before returning this to Newegg. My old video card bit the dust and artifacts everywhere, so I don't have a temp replacement.

  • What PSU for GTX 960 Gaming 2GB?

    I'm going to buy a MSI GTX 960 Gaming 2GB, and I've notice on the box it says 42amps. now I'm a little confused when it comes to finding out amps on PSU's. I'm running an i5 4690K, 8GB HyperX Savage DDR3, MSI H81M-E34 mobo.
    I'm wondering if these are any good?
    Seasonic S12G-650 650W 80+ Gold Certified PSU with Jap Caps and 12cm Silent BB Fan
    XFX 650W Core Edition Bronze 80+ Certified Wired PSU
    XFX P1-650G-TS3X - TS Series P1-650G-TS3X (650W) Power Supply Unit Easy Rail Plus with Full Wired Cables
    Thanks for any and all help.

    Quote
    I'm wondering if these are any good?
    Seasonic S12G-650 650W 80+ Gold Certified PSU with Jap Caps and 12cm Silent BB Fan
    XFX 650W Core Edition Bronze 80+ Certified Wired PSU
    XFX P1-650G-TS3X - TS Series P1-650G-TS3X (650W) Power Supply Unit Easy Rail Plus with Full Wired Cables
    from those my choice will be the 1st one as Nichrome mention
    Quote from: keith3_16 on 20-April-15, 16:32:07
    Yeah I know the wattage would be fine, I just want to make sure I had the amps I needed. Last thing I wanted to do was buy one with out the Amps needed.
    https://forum-en.msi.com/faq/article/power-requirements-for-graphics-cards
    Seasonic S12G-650 650W 80+ Gold Certified PSU with Jap Caps and 12cm Silent BB Fan :
    +3.3V@20A, +5V@20A, +12V@54A, [email protected], [email protected]
    msi-gtx_960_gaming_2g 120W max:
    http://media.msi.com/main.php?g2_itemId=120948
    say from base decent PSU with 30A, + second one[120/12=10A] 30A+10A ==>40A max
    will be just fine to handle 2 of them

  • GTX 960 GAMING 2G vBios

    Hello,
    I just bought a MSI GTX 960 Gaming 2G. I was wondering if someone could tell if the card has the latest bios.
    The S/N of the card is 602-V320-02SB1412141633
    Current bios is: https://www.dropbox.com/s/z0d0p6bhhujheqb/GM206.rom?dl=0
    Thank you!

    yes that's the latest version

  • UEFI boot hangs with MSI GTX 960 installed

    Wasn't sure whether to post this in the graphics forum or the motherboard forum, since both components are MSI.
    I have a system with an MSI Z68A-GD65 (G3) motherboard with the old v23.7 BIOS, and a Core i7-2600k Sandy Bridge processor.
    I just bought an MSI GTX 960 Gaming 2G. However, after installing the new card, the boot hangs every time with a flashing cursor. If I put my old card back in (GTX 460), everything is fine.
    I've read that a BIOS update is recommended for the GTX 960 cards. However, the newer BIOS versions for this motherboard always say not to install them unless you have an Ivy Bridge processor, which I do not.
    I see the newest version of the BIOS is v25.8. There was another time I tried upgrading the BIOS in the past (to v25.6) and I had issues with it not saving my custom overclock settings for the i7-2600k, so I reverted to v23.7. So I'm reluctant to upgrade it now for that reason.
    Anyone know if the v25.8 BIOS update will fix the problem with the GTX 960? Or is there something else I can try to get it to boot with the old v23.7 BIOS?

    Updating it to v25.8 BIOS did work. The GTX 960 works fine now.
    But, I am now having the same issue I was having when I previously tried updating the BIOS: my overclock settings are never saved. Actually, that's not exactly true. I can set them in BIOS exactly how I want them, and they are always saved there. But once I boot Windows, the settings are reverted.
    I reinstalled the Intel Management Engine drivers as well, but no luck.
    However, the BIOS update did allow the GTX 960 to work properly, so I will start a different thread in the motherboard forum about this overclocking problem.

  • Screen resolution MSI Nvidia Gtx 960 Gaming 2 GB

    i have a BenQ GL2750H and MSI Nvidia Gtx 960 Gaming 2 GB PCI-E Graphics Card but when my screen is at 1920x1080 (recommended) the picture, task bar goes off screen ?
    is it a bad card ? or my screen doesn't work with it ?
    i have attached a picture

    You can adjust the desktop size and position under NVidia control panel or use your buttons on your screen. Have you tried them yet?

  • Question about MSI GTX 960 fans

    Hi,
    Just received my MSI GeForce GTX 960 Gaming 2G today. I noticed that the fans sometimes spin up to ~ 600 rpm for a sec, go back to 0, spin up again ... during gaming see Afterburner screenshot.
    I wonder if this is ok or if there is something wrong with the fans/fan control?

    There is no vbios for a card model. There are several batches of any card model that might require different versions. If a new one is available for your card depends on the batch of card and current vbios installed. To check the card's S/N and a copy of the current vbios (saved to file, uploaded to some file hoster and the link added here) is needed.

  • Control Voltage for Msi GTX 760 Gaming

     We can see MSI GTX 760 Gaming has 8 pin + 6 pin conector so good for up to 300W but MSI Afterburner only add 12mV, it's too small with board power and it;s cooler, more voltage can be possible in future

    No, nvidia restricts available overvoltage. MSI won't add more overvoltage possibilities.

  • REQUEST UEFI GOP VBIOS FOR MSI GTX 780Ti GAMING 3G

    I just received my new MSI GTX 780Ti GAMING 3G,  but now windows 8.1 pro won't do the ultra fast uefi boot! I need a uefi/gop vbios for this card please!
    s/n: 602-v298-12sb1312076606
    link to my ROM:
    http://www.filedropper.com/gk110

    Quote
    Present Vbios: 80.80.21.00.77
    That's no vbios version:
    Quote from: GOP / UEFI Vbios requests - Read Here First on 29-March-13, 22:47:26
    3.) If we need to check if thier is a more recent version. We can check your Vbios in one of two ways.
         A.) Upload a copy of your current vbios somewhere and give us a link. You can save a copy of your vbios using >>GPU-Z<<.
         B.) You can also just use NVFLASH >>Download NVFLASH for windows<<
    Syntax:
    nvflash /v >rep.txt [ENTER]
    This will copy all of the information we need into a txt file you will fine in the folder in which you placed nvflash.
    4.) Be aware that gpu-z screenshots or what gpu-z reads out as bios version are NOT of any use for identifying the required vbios version. While it doesn't hurt to add those when S/N and an actual copy of the vbios are also supplied simply just adding screenshots or version readouts will not get you any further and us having to ask for the required informations. 

  • REQUEST: Latest BIOS update for MSI GTX 970 Gaming 4G card

    Hi, I'd like the latest BIOS version for my MSI GTX 970 Gaming 4G card. I don't know what the serial number is, I don't have the box anymore. I've attached my BIOS file I saved through GPU-z. Thanks in advance! 

    Quote from: Nichrome on 07-May-15, 04:01:10
    Hi
    Check graphics card itself, should have a sticker with S/N. Else it might be hard (or impossible) to provide correct vBIOS.
    Thanks!   S/N: 602-V316-09SB1410116XXX

  • MOVED: REQUEST: MSI GTX 970 Gaming 4G original bios

    This topic has been moved to GAMING Graphics Cards.
    https://forum-en.msi.com/index.php?topic=251103.0

    Quote from: Svet on 04-December-14, 14:56:25
    list full detailed system specification, see >>Posting Guide<<
    which version was this?
    Board: Asus Z87I-Pro
    Bios: Version 1003
    VGA:   MSI GTX 970 Gaming 4G
    PSU:   Silverstone SST-ST65F-G Strider 650W Full Modular Power Supply single +12V rail with 54A
    Intel Core i5-4670K Haswell Quad-Core 3.4GHz LGA 1150 84W Desktop Processor
    MEM: 8GB (2x4GB) 1600mhz Corsair DDR3 Vengeance Jet Black Low Profile, PC3-12800, Non-ECC, CAS 9-9-9-24, XMP, 1.5V
    HDD: Samsung 840 Series 250GB 2.5 inch SATA Solid State Drive
    COOLER: cooler master hyper 212 evo
    OC: none
    OS: Windows 8.1 64 bit
    S/N for the GPU is 602-V316-03SB1409075224  current bios version is 84.04.2F.00.F1 which was downloaded from https://forum-en.msi.com/index.php?topic=184740.0  and I used  NV316MH.182
    I don't know what the name of the vBIOS I updated from was, but it was the stock version that came with the card so most likely the vBIOS before the one I'm currently using which was downloaded to fix the fans randomly spinning.

  • REQUEST: MSI GTX 970 Gaming 4G original bios

    My S/N is 602-V316-03SB1409075224 I would like to request the original vBIOS that my card came with.
    My card had problems with the fans randomly spinning and so I updated to the appropriate bios which was NV316MH.182 and that fixed the problem. However I have noticed since updating that the noise from the card has increased when playing games and today whenever starting any game I get an instant crash and my whole system resets, this happens now even when I'm not playing a game and my computer has been randomly restarting and I know it's a problem with the GPU.
    I am worried that it is most likely that the GPU is failing but I would like to try flashing the card to its original stock vBIOS and seeing if that fixes anything. Even if you don't believe the vBIOS is the problem, I would still very much like to have the stock vBIOS for my card. Thanks!
    I'm on windows 8.1 64 bit.

    Quote from: Svet on 04-December-14, 14:56:25
    list full detailed system specification, see >>Posting Guide<<
    which version was this?
    Board: Asus Z87I-Pro
    Bios: Version 1003
    VGA:   MSI GTX 970 Gaming 4G
    PSU:   Silverstone SST-ST65F-G Strider 650W Full Modular Power Supply single +12V rail with 54A
    Intel Core i5-4670K Haswell Quad-Core 3.4GHz LGA 1150 84W Desktop Processor
    MEM: 8GB (2x4GB) 1600mhz Corsair DDR3 Vengeance Jet Black Low Profile, PC3-12800, Non-ECC, CAS 9-9-9-24, XMP, 1.5V
    HDD: Samsung 840 Series 250GB 2.5 inch SATA Solid State Drive
    COOLER: cooler master hyper 212 evo
    OC: none
    OS: Windows 8.1 64 bit
    S/N for the GPU is 602-V316-03SB1409075224  current bios version is 84.04.2F.00.F1 which was downloaded from https://forum-en.msi.com/index.php?topic=184740.0  and I used  NV316MH.182
    I don't know what the name of the vBIOS I updated from was, but it was the stock version that came with the card so most likely the vBIOS before the one I'm currently using which was downloaded to fix the fans randomly spinning.

Maybe you are looking for

  • Sleep/Standby makes resolution changes to lowest setting

    Recently almost every time I turn my computer on after it going into sleep it ends up switching to the lowest resolution available (800x600). I can't figure out why exactly it's doing this. It's very annoying because when it resizes, it will move my

  • Text in table being truncated in between.

    Hi All, I have a form with a nested table of 3 tables, form being triggered by a driver program. The data for these tables is a longtext which mean the text is splitted into multiple lines and comes as a table type. All the 3 nested tables are for th

  • Iframe page doesn't display

    I have inserted code that works on another page of my site: <iframe src ="program/Directory/directory.html" width="590px" height="400px" frameborder="0" scrolling="yes">   <p>Your browser does not support iframes.</p> </iframe> I inserted the same co

  • How to create a responsive menu using menu module V2

    Hi Guys Just wanted to know if there is an article on how to make the module_menu v2 responsive? I don't have a problem making it vertical for mobile phones but I don't know how to change the hover state to click state to expand sub navigation items.

  • YTD in Measures or TIME

    Hi Guys, I wonder what is best practice, having YTD and MTD as a Measure for each of the core measures like: Actual Actual YTD Actual MTD Budget Budget MTD Budget YTD .. about 30 measures Or having it in the time dimension 2010 ---Qtr ----Jan -----Ja