Msi gtx 970 4G low fps

Hello,
Been struggling with this for about a week now. I took the offer on the Far Cry 4. I upgraded my card from a GTX 660ti single card. I have played FC 3 on the old card with no difficulties. I have loaded the newest drivers and upgraded my BIOS. I have Bench marked the card  on 3DMark and Unigene. I am getting very low readings and not even reaching 30 fps. When I play Far Cry 4 I barely get 12 fps. I am not sure if I have done something incorrectly here via the installation or I have a faulty card. My setup is as follows;
i7 - 3770k @3.50 GHz 4 core
16 GB of RAM
Windows 7 Home Premium 64 bit
BIOS American Megatrends Inc 2014
Any insight here would be very much appreciated.

Hi Dave,
I have the same card as you this is what ive found to be my best setttings. There by no means a fix just helps.
1 uninstall the driver suite using DDU in safe mode .
2 download drivers 344.11.
3 install ONLY 344.11 not the package install what you need later down the line.
4 go in the bios and see if you can enable x.m.p in your ram  also when your there check pci is on next gen 3 .
5 back in windows go to nvidia control panel and set ( this is the best one for  me ) change down from the native resolution to one lower that works for you . eg i use a Sony bravia native is 1080p 1920x1080 iv'e changed to 1080p 1600x900
6 go to manager 3d settings
max  pre rendered frames  use 3d
multi display single display use performance mode
power management prefer maximum performance
vertical sync use 3d application
virtual reality pre rendered frames  1
msi after burner overclock  your gpu
core voltage  +20
power limit  max
clock core  +200
memory clock +250
fan speed auto
 In game  set  all  graphic settings to  max (for some strange reason you don't see any fps improvement if you set them to low )
turn v sync on  in all games or cap fps
use fraps software  to monitor your fps
my games 
Bf4 multi player  in use bf4 settings editor to cap my fps at 60  . have micro stuttering but is  is 95% 60 fps every where
cod blop2 frame in game caped at 45  very  little problem
crysis   totally unplayable
far cry 3  working ok
just cause 2 good
batman arkham just started playing seams OK
Hope it works for you
Michael

Similar Messages

  • Msi gtx 970 gaming low asic quality

    My gtx 970 gaming card own an nvidia chip with asic value of only 64.4%
    I purchased this model because i think they used a high quality nvidia chip like my msi gtx 770 gaming /oc (80.2%) end msi gtx 670 pe /oc (86.6%).
    This chip is for reference card not for high end card...I'm a little disappointed

    asic value is irrelevant. If gpu works fine there is nothing to complain. MSI doesn't cherry pick gpus. As long as they are meeting the specs card is sold with you got what you paid for.

  • MOVED: REQUEST: MSI GTX 970 Gaming 4G original bios

    This topic has been moved to GAMING Graphics Cards.
    https://forum-en.msi.com/index.php?topic=251103.0

    Quote from: Svet on 04-December-14, 14:56:25
    list full detailed system specification, see >>Posting Guide<<
    which version was this?
    Board: Asus Z87I-Pro
    Bios: Version 1003
    VGA:   MSI GTX 970 Gaming 4G
    PSU:   Silverstone SST-ST65F-G Strider 650W Full Modular Power Supply single +12V rail with 54A
    Intel Core i5-4670K Haswell Quad-Core 3.4GHz LGA 1150 84W Desktop Processor
    MEM: 8GB (2x4GB) 1600mhz Corsair DDR3 Vengeance Jet Black Low Profile, PC3-12800, Non-ECC, CAS 9-9-9-24, XMP, 1.5V
    HDD: Samsung 840 Series 250GB 2.5 inch SATA Solid State Drive
    COOLER: cooler master hyper 212 evo
    OC: none
    OS: Windows 8.1 64 bit
    S/N for the GPU is 602-V316-03SB1409075224  current bios version is 84.04.2F.00.F1 which was downloaded from https://forum-en.msi.com/index.php?topic=184740.0  and I used  NV316MH.182
    I don't know what the name of the vBIOS I updated from was, but it was the stock version that came with the card so most likely the vBIOS before the one I'm currently using which was downloaded to fix the fans randomly spinning.

  • REQUEST: MSI GTX 970 Gaming 4G original bios

    My S/N is 602-V316-03SB1409075224 I would like to request the original vBIOS that my card came with.
    My card had problems with the fans randomly spinning and so I updated to the appropriate bios which was NV316MH.182 and that fixed the problem. However I have noticed since updating that the noise from the card has increased when playing games and today whenever starting any game I get an instant crash and my whole system resets, this happens now even when I'm not playing a game and my computer has been randomly restarting and I know it's a problem with the GPU.
    I am worried that it is most likely that the GPU is failing but I would like to try flashing the card to its original stock vBIOS and seeing if that fixes anything. Even if you don't believe the vBIOS is the problem, I would still very much like to have the stock vBIOS for my card. Thanks!
    I'm on windows 8.1 64 bit.

    Quote from: Svet on 04-December-14, 14:56:25
    list full detailed system specification, see >>Posting Guide<<
    which version was this?
    Board: Asus Z87I-Pro
    Bios: Version 1003
    VGA:   MSI GTX 970 Gaming 4G
    PSU:   Silverstone SST-ST65F-G Strider 650W Full Modular Power Supply single +12V rail with 54A
    Intel Core i5-4670K Haswell Quad-Core 3.4GHz LGA 1150 84W Desktop Processor
    MEM: 8GB (2x4GB) 1600mhz Corsair DDR3 Vengeance Jet Black Low Profile, PC3-12800, Non-ECC, CAS 9-9-9-24, XMP, 1.5V
    HDD: Samsung 840 Series 250GB 2.5 inch SATA Solid State Drive
    COOLER: cooler master hyper 212 evo
    OC: none
    OS: Windows 8.1 64 bit
    S/N for the GPU is 602-V316-03SB1409075224  current bios version is 84.04.2F.00.F1 which was downloaded from https://forum-en.msi.com/index.php?topic=184740.0  and I used  NV316MH.182
    I don't know what the name of the vBIOS I updated from was, but it was the stock version that came with the card so most likely the vBIOS before the one I'm currently using which was downloaded to fix the fans randomly spinning.

  • MOVED: MSI GTX 970 Gaming 4G + MSI Z87-G45 incompatible? Noise on speakers

    This topic has been moved to MSI Intel boards.
    https://forum-en.msi.com/index.php?topic=184068.0

    Used hardware
    MSI GTX 970 Gaming 4G (+ RMA'ed new one)
    Gigabyte 670 GTX Windforce
    MSI Z87-G45 Gaming motherboard (with Intel i7-4770K, Corsair Vengeance Pro 16GB, and Crucial M500 - 480GB SSD)
    Asus P5N32-E with Q6600 and 8GB DDR2 (Going to test this)
    SoundBlaster-Z Audio card
    Roccat Kave 5.1 Gaming Headphones (4x 3.5 mm jacks: Front, Rear, Center&bass, Microphone + USB amp/volume control)
    Corsair B600 (600W) PSU (secondary)
    Corsair RM750 (750W) PSU (Primary)
    To summarize
    Corsair RM750 + MSI Z87-G45 + Gigabyte GTX 670 + Roccat Kave = really faint noise only when scrolling in browser, in game not heard
    Corsair RM750 + MSI Z87-G45 + MSI GTX 970 + Roccat Kave = in game loud and heavy noise + screech when scrolling in browser
    Corsair RM750 + MSI Z87-G45 + MSI GTX 970 + Soundblaster-Z + Roccat Kave = In game moderate to heavy noise
    Corsair B600 + MSI Z87-G45 + MSI GTX 970 + Soundblaster-Z + Roccat Kave = In game weak to moderate noise
    Corsair B600 + MSI Z87-G45 + MSI GTX 970 + Soundblaster-Z + Roccat Kave with Mic disconnected = Almost no noise, ifg you listen for it, really faint background noise in game. But well within my acceptable limits.
    Tomorrow I'll try:
    Corsair B600 + MSI Z87-G45 (onboard sound) + MSI GTX 970 + Roccat Kave without mic
    Corsair RM750 + Asus P5N32-E (onboard sound) + MSI GTX 970 + Roccat Kave with mic
    I failed to mention, that the first thing I did was to remove my HD Audio Front panel connector off its header.
    So I did some more searches. The noise has something to do with the capacitors on (presumably) the video card. The higher the pitch usually coincides with higher FPS. So the interference must be coming from the video card, as this is the last thing added and probably the main cause.
    Both the motherboard & the SoundBlaster-Z pick up the EMI/RF interference. (I am disappointed by the SoundBlaster about this).
    I'll test with the older motherboard and see how I proceed from there.

  • B2 Error with new MSI GTX 970 :(

    Hi there team!
    Just registered to try and get help. I spent around 6 hours researching + trying all the suggestions throughout many different forums, but the B2 error still persists. I am currently running the following spec:
    Mobo - MSI Z68A-G43 (G3), with version 4.30 ( I flashed bios last night and still no help)
    CPU - Intel® Core™ i5-2500K Processor, 3.5GHz etc.etc.
    RAM - Corsair Vengeance 2x4gb at 1333MHz
    GPU - MSI GTX 970 GAMING Twin Frozr V 4GB GDDR5
    PSU - Cooler Master Silent Pro 700W
    I have tried:
    -Taking out the card and using the on-board graphics to flash the bios to later version, No help. (during this process, the B2 error does NOT show up)
    -Upgraded the card to latest nVidia drivers, even uninstalled and re-installed them. No help.
    -Upgraded all the drivers from MSI, i.e. chipset etc. through Live Update 6. No help.
    When the card is in, I cannot even access bios, it just gets stuck at B2 screen for like a minute, and then carries on with the boot process. I am able to play games etc. after the booting, but this error for sure should not be there when the PC boots up. I didn't have any issues with my old GTX 560 TI. I've read different forums saying that it might have something to do with the mobo thinking that something has to be connected to the on-board graphics; or that flashing BIOS helped a lot of users, but not me :(.
    I don't have a second PC to test the card on.
    Literally, I would try anything, please someone just help :(( This card is a beast and I wanna be able to properly use it and not having to worry about this error.
    Thank you very much guys, hope someone can help!

    Quote from: gabe_dimitrov on 08-February-15, 20:40:51
    Man thank you so much! It is finally working!!! Thank you!!!! ))) It is showing correct version in BIOS, does not show B2 error whatsoever, all done! )
    Thanks for your time! You can close thread, but it's very useful for anyone that has this issue!
    Wich version of BIOS do you have installed? Can you OC your processor with new BIOS?

  • MSI GTX 970 not being detected on first PCI-E 3.0 slot of MSI Gaming 5 motherboa

    Hi guys.
    So I recently got myself a new build and some of the components include a MSI GTX 970 Gaming 4G GPU and a MSI Gaming 5 mobo. When installing the GPU to the motherboard I found that for some reason nothing was being displayed on the screen. The screen wouldn't display a no signal message but it would stay black when I booted the PC up. However, when I plugged the GPU into the 2nd PCI-E 3.0 slot it would work and display on the screen. I read on a Tom's Hardware thread of someone with a similar problem and it was recommended to him to check his CPU for bent pins and he later confirmed that was the problem. I have tried the same, but as far as I can tell all of the pins were in their natural state and couldn't find any bent ones.
    But I also discovered something else which really started to confuse me... When I plug in my old GPU (a Gigabyte GTX 560 Ti) into the first PCI-E 3.0 slot, it would work normally?! Why would it work fine with my GTX 560 but not my GTX 970?? I have tried everything. Even stripping the pc down to the most basic parts on a wooden surface and tested everything but it's still the same problem. I have also made sure that the display setting in the BIOS is set to PEG, but it would still not display anything when the GTX 970 is in the first slot, but if I plug the HDMI cable directly into my motherboard, even with the GTX 970 installed on the first slot, it would display normally. Also, in my BIOS it doesn't even detect anything being in the first PCI-E 3.0 slot in the Board Explorer menu. But when I installed it in the 2nd PCI-E 3.0 slot the Board Explorer menu would recognize it, but would say it's running at x8 and not x16. Should I be worried about this?
    My full setup:
    MSI Gaming 5 Motherboard
    Intel i7 4790K
    MSI GTX 970 Gaming 4G
    Kingston HyperX 1333Mhz 8Gb (2x4Gb)
    Corsair RM 750 PSU
    Corsair H80i CPU cooler
    Any advice from you guys on what to do or what the problem could be would be greatly appreciated!

    remove power cord from the PSU and do >>Clear CMOS Guide<<
    also reseat the card into PCI-E slot 1 and make sure its fill very well into the slot
    Quote
    MSI Gaming 5 Motherboard
    full model is..?

  • REQUEST: Latest BIOS update for MSI GTX 970 Gaming 4G card

    Hi, I'd like the latest BIOS version for my MSI GTX 970 Gaming 4G card. I don't know what the serial number is, I don't have the box anymore. I've attached my BIOS file I saved through GPU-z. Thanks in advance! 

    Quote from: Nichrome on 07-May-15, 04:01:10
    Hi
    Check graphics card itself, should have a sticker with S/N. Else it might be hard (or impossible) to provide correct vBIOS.
    Thanks!   S/N: 602-V316-09SB1410116XXX

  • Request - MSI GTX 970 Gaming 4G VGA bios

    Hey,
    I have MSI GTX 970 Gaming 4G and I've heard about this new bios nv316mh.186 on Nvidia forums. Now, I have and use msi live update [the newest version] and it doesn't show any new updates for my card.
    System information section shows me that my current VGA bios version is nv316mh.182
    Here is my S/N: 602-V316-03SB140909****
    Thanks for any help!

    here it is: https://forum-en.msi.com/index.php?topic=252890.msg1453625#msg1453625

  • MSI GTX 970 Gaming 4G Issues & BIOS Update

     bios.zip (136.34 kB - downloaded 37 times.)
    Hello,
    ever since I bought my GTX 970 I've had about 5 BSOD's while playing CS:GO and GTA:V. I am not sure whether it's a GPU issue or not, but I never had that issue before (at least with CS:GO).
    Tech specs:
    MB: z87-pro
    CPU: i7-4770K
    GPU: MSI GTX 970 Gaming 4G
    OS: Win7 x64 SP1
    latest OS updates
    latest nVidia drivers
    I've been wondering if there's a BIOS update for my GPU? I also tried just today to download MSI Live Update 6 but after executing the installer it displays "This application does not support this platform."
    I've attached my GPU Bios.
    Thanks in advance!

    Quote from: Nichrome on 26-April-15, 03:21:48
    Hi
    With LiveUpdate, don't worry. Many users got issue with it, I believe MSI is aware of this already.
    Is your motherboard running latest BIOS?
    Is it known to work fine with other graphics card??
    Do you have any OC on your CPU/RAM? (RAM OC=more than 1600MHz). Remove and try again.
    What did the BSOD say? Error code?
    Heya, thanks for the reply.
    That's good to know for Live Update, just wanted to let you know. Before my GTX970 I was using an Asus GTS 450 (I know, lame) and used integrated graphics a couple of times but never had BSOD's during games with either of those. I didn't take a note of the BSOD error code, can I find a log somewhere on my system to upload it?
    OC-wise everything is running on stock clock, BIOS is also latest version (2103, according to Asus).

  • MSI gtx 970 gaming 4G

    Hi....I've just bought this msi graphic card...is it possible to order a backplate for this card? maybe something like the backplate of the new msi 970 gaming 4G golden edition...
    thanks

    This is a prototype....I've co-operated with ColdZero, that makes these backplates and other stuffs.
    And this is the final work for my MSI GTX 970 gaming 4G

  • MSI GTX 970 GAMING 4G + RAIJINTEK Morpheus

    Greetings everyone.
    So as I'm aware off, there are no "default" PCB for the 970. Manufacturers were told to create their own PCB or base it off some older PCBs.
    With that said, how would you know if an aftermarket GPU cooler would fit on lets say MSI GTX 970 GAMING 4G, since there should be no such things as "reference mounting holes"?
    I have the RAIJINTEK Morpheus GPU cooler laying around alright. But is there no way at all, to know if it'll fit the mention videocard?

    Okay..
    This is my suggestion:
    https://www.overclockers.co.uk/webnote.php
    Presales Enquiry:
    Tell them that you want to buy SPECIFIC graphics card (e.g. MSI GeForce GTX 970 Gaming Edition 4096MB ) and you also want to buy Rajintek Morpheus for it. And ask if it will fit. You don't have to buy it from them though (don't worry if you live outside the UK, they just provide damn good support on presales questions)

  • Msi GTX 970 Gaming 4G - GOP ?

    Dear MSI Team,
    i have a msi GTX 970 Gaming 4G in combination with a ASROCK Fatal1ty Z97 killer mainboard.
    The VBIOS version of my my GTX 970 is: MSINV316MH.184
    When I try to enable the Ultra Fast Boot option im my UEFI Bios of the mainboard, my PC does not Boot and shows a black screen.
    Only when I remove the GTX 970 from the mainboard and use the built in graphics card I’m able to boot again.
    Therefore I guess the MSINV316MH.184 VBIOS is not a GOP  BIOS.
    Question: Is there a other VBIOS available for my GTX 970 Gaming 4G whith GOP ?
    The label on my graphics card shows the serial number: 602-V316-050B1412019295
    Thank you in advance
    Best regards

    Quote
    Therefore I guess the MSINV316MH.184 VBIOS is not a GOP  BIOS.
    nope, that guess is wrong
    this is GOP/UEFI vbios
    9xx series also have only GOP/UEFI vbioses, they don't have legacy vbios
    Quote
    The VBIOS version of my my GTX 970 is: MSINV316MH.184
    Question: Is there a other VBIOS available for my GTX 970 Gaming 4G whith GOP ?
    The label on my graphics card shows the serial number: 602-V316-050B1412019295
    latest version .186 can be found here:
    https://forum-en.msi.com/index.php?topic=252727.msg1452642#msg1452642

  • Some body (mod or tester) can show me picture board of MSI GTX 970 Tiger

     I need a high res picture board of MSI GTX 970 tiger to know voltage controller they used is what, some body help me please ?

    Quote from: hpipiw on 28-October-14, 13:30:42
    Does this have what you need?
    pic from http://www.ncixus.com/products/?sku=102246
    thank you so much 

  • PC freezes at BIOS with new MSI GTX 970 gaming

    Went from a Windforce 670 to a MSI GTX 970 gaming, and the PC locks at the startup bios screen. I get 1 beep every 10-15 secs or so.
    I've tried reseating the card, memory sticks, checking connections and nothing. If I put the windforce 670 back in, the pc is perfectly fine.
    Specs
    Windows 7 64 Bit
    Intel i7 2600 @ 3.4 GHz
    BIOS AMI 7.14
    DDR3 ram 8gb @ 677mhz
    Corsair GS600 PSU
    Pegasus Corporation 2AC2 mobo

    Hi,
    Yes you will need to reinstall Operating System, type the activation key in, install fresh drivers etc. You can save documents, backup anything like installing packages for favourite software (e.g. CCleaner) but all other has to be reinstalled.
    I would suggest Z97 PC Mate with i5 4690K, Cooler Master Hyper 212 EVO cooler. Personal budget choice but still with decent performane (quad CPU and OC availability). RAM+PSU+Case you currently have should work fine.

Maybe you are looking for

  • How to enable fnd log in self service page

    Hello, In professional forms, we can enable fnd log using the profile options "FND: Debug Log Enabled" to Yes and "FND: Debug Log Level" to different levels. Similarly, can we do the same with Self Service page? how and where can i see the log result

  • Illustrator Files Heavy/Big?

    I was on the net this morning researching for a certain trick on Adobe Illustrator CS4. Then came across a few comments regarding Illustrator designers as being slow due to application features. I was disappointed. I have been on FHMX , et al for yea

  • Any way to restore events that were erased after I changed settings?

    I made the mistake of syncing iCal to MobileMe and then lost all of the original events I had entered on my iPhone. I guess MobileMe thought I wanted to replace the calendar on my iPhone with a pretty-much unused, blank calendar in MobileMe??? Does a

  • Why is my computer clicking?

    My computer is clicking at random times, and for no apparent reason. Is there a way to stop this?

  • Stop cells from overwriting without warning ?

    Hello all ! and Merry Christmas ! I have noticed - as a new user to numbers - that when I move contents of a new cell to a new position, numbers will overwrite contents of the new cell without any warning. Microsoft Excel used to prompt before overwr