MSI GTX560 Ti Hawk - question about the last bios release ?

Hi Svet
I am new on this website
i have an MSI N560GTX-Ti twin Frozr II
on WIN 8
i would like to update it
- i am lost with the different mode : silent , performance
- do i need to update with 2 files : one for the Vbios and for UEFI too ?
GPU GF114 rev A1
Bios 70 24 21 00 00 (P1040-0050)
Device ID 10DE - 1200
Sub Vendor MSI (1462)
i need some help
thank you in advance

don't know what's benefice from it, changes are not listed.
Quote
is for the silence mode
or performance
your card don't have dual chips
Quote
and what about the UEFI bios ?
5xx don't have UEFI bios

Similar Messages

"Don't import duplicates" and question about the Last Import folder

*THE CLIP IMPORTING (TO IMOVIE) PROCESS*
Ever since the last time I uploaded clips and made movies with them, I have shot new footage. I never erased the clips that were in the Sanyo VPC-HD2000A.
This morning I uploaded the clips to my iMovie '11, including image stabilization. (Bypassed iPhoto '11 completely, on purpose.)
What caused me concern while the clips were uploading is that there were no prompts about +"only new clips, no duplicates"+ to be imported. There was one set of options saying "Importing checked, or Import checked," but the problem was that I saw nowhere that any of the clips in the box (I will call it the Sanyo Box) could be checked. Selected, yes, but checked, no. I tried to select all of the newly shot footage, but that was impossible. It was only possible to select one clip at a time.
I did not interrupt the file transfer because I did so once last month and it caused me problems.
I ended up with 36 files uploaded and imported.
*THE EVENT LIBRARY LAST IMPORT FOLDER*
_In the iMovie '11 Events Library, the Last Import folder contains clips that were uploaded last month to iMovie. If I am to understand the label, "Last Import" does not mean, "And also stuff from a previous import."_
I realize that having duplicates of clips can be solved by deleting clips, but I really want to know what is going on and also what ought to be going on. Shouldn't the Last Import folder contain only those clips that are in the most recent upload?
And why was there no prompt for all duplicates to be disregarded and not imported?
Did I possibly bollix up the preferences in my Sanyo VPC-HD2000A and did I accidentally tell it not to ask whether or not I want to import duplicates?
I can see that someone could say, "Make sure you delete all old clips before you shoot new footage," but that is an "of course." I need to know what happens when you keep clips in the camera and want to import only the new clips.
-L

No.
In LR3 it would ALWAYS pick up the duplicates if I inserted a card I'd just imported.
With no change to my workflow I'm now having instances of the same files being imported multiple times.

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place. Tks

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place? I know there are different possibilities to set.
I tried but it not helped for me. What I can do? How and where can set this they stay on their place?
Thanks.
laci

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

MSI GTX560 Ti Hawk Load Temperatures

I just got my MSI GTX560 Ti Hawk within the last week. It's a nice 37 degrees on idle but runs at 75 degrees on load with fans running at 70-76% taken from GPU-Z. I tried running it with the case open with a large fan blowing into the case but the temperatures only dropped 3-4 degrees to 73-74 degrees. Before getting the Hawk I read reviews that it should run between the low 50s to at most high 60s if the fan speed switch set to "silent". But for mine, the switch is set to "performance" but I couldn't get similar temperatures. Any help for my situation? :/
Oh yeah here are my PC Specs:
Intel Core i5-2500 @ 3.30GHz
Biostar TP67B+
MSI GTX 560 Ti HAWK with 270.61 Driver
Team Elite PC10600/1333MHz DDR3 8GB
WD Blue 500GB 16MB + Hitachi Deskstar 1TB 32MB
Dell U2311h
Creative X-Fi Xtreme Audio
LG 22x DVD-RW
FSP Aurum 600w
Coolermaster CM 690 II Basic
Windows 7 Home Premium 64bit
The ambient temeperature is around 27 degrees on average at night here where I stay and was 27 degrees when I took the readings.
All hardware is runnign at stock voltages and speeds, no overclocking has be done at all on any component.

Quote from: dtonies75 on 11-June-11, 12:09:43
I have the same card, but temp really hot!!
I've played dirt 3 and temp gone to 85C, it maked crash the game to windows.
I've try using 3DMark Vantage, temp going to 87C.
Is this normal?
Should I RMA this card?
Thx before..
RMA it

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

I want to question about the official service at the service center of Sony.

I want to question about the official service at the service center of Sony.
long since I like the models and items sony. from start playstation, cameras, camcorders up, I've ever had. and a new camera that I bought two years ie compact cameras Sony Cybershot DSC H200. as of a month ago, a camera was having problems in lenses that would not close. and setting the automatic mode to move by itself. I came to the Sony Service Center in Makassar, precisely on Jl. Shop Pengayomann A5 / 05 (0411) 442340.
operator initially said only two weeks to work on my camera. but this week has been more dau even want to go in a month tomorrow, dated July 9, no news from the service center. and I kept the call to the office service. as well as assorted reasons. there are no spare parts or technical constraints, and the last one I call to his office, he said the factory spare part is damaged. imported directly from Singapore. I think, ko new spare part it can be damaged before using that? how the quality of this Sony spare part? ugly? not good? why?
I was disappointed with this situation, where soon it will Eid, want to return home as well to Java. but the camera has not been settled workmanship?
nah, roughly what is the solution of the Sony plagued with this problem? please help, because he did not know to whom to complain. operator had just said: it's up to the father alone.
once again I asked for his help. solution. if you can before Eid arrived.
Thank you,
AD. Rusmianto

Hi awwee107,
Welcome to the Sony Community!
We have forwarded your query to the relevant team for their further assistance and someone from local CC will contact you.
Thanks!

Getting information about the last opened document?

Hi there!
I've got a question about the reader and it's opened documents: Is there any possibility to get any information about a document, that was already opened by the Adobe reader?
Example: I open xyz.pdf, and after closing the reader, i want to check what the last page was, the user looked at. Or the time, when this document was closed.
thanks
Daniel

Try something like this:
Font font = UIManager.getFont("Button.font");hope this helps!

Question about the notification center (Mails and Reminders)

Hello together,
I just started using Mountain Lion and now I have some few questions about the notification center.
1. Is it possible to show all reminds in the notification center? I have a lot of reminds without an date / time and they don't appear in the notification center.
2. Is it possible to show the last five Mails in the notification center? I'm just seeing new incoming mails, but I would prefer it, if I could see the last five mails
     (no matter if readed or unreaded).
Thank you very much for you help.
Ratte1988
Hallo zusammen,
ich habe gerade damit begonnen Mountain Lion zu verweden und habe einige Fragen zur Mitteilungszentrale.
1. Ist es möglich alle Erinnerungen in der Zentrale anzuzeigen? Ich habe viele Erinnerungen, die ohne Datum / Uhrzeit sind und in der Mitteilungszentrale
     daher nicht auftauchen.
2. Ist es möglich, sich die letzten fünf Mails in der Zentrale anzeigen zu lassen? Ich sehe nur neue ungelesene Mails, würde es aber vorziehen die letzten
     fünf Mails sehen zu können (egal ob gelesen oder ungelesen.)
Danke für eure Hilfe.
Ratte1988

Only reminders with dates appear in the notification center - undated ones don't. Once an email has been read, it is removed from the notification center. Apple has a feedback center where you can offer suggestions.

Question about the "iPod radio remote"

I assume the "radio remote" is the same for every country and is under software control. I want to buy in Canada but use in UK and Canada.
Has anyone got one and seen the RDS work, in the UK almost every FM channel is RDS. Do they have RDS in Canada (Toronto) can anyone confirm?
And of course it says FM so this again I assume no AM, not that I need AM it was just an interest in if it could do it.
What happens about headphones, you can plug a pair into the remote, can you still plug into the bottom of the iPod or does the remote connector get in the way.
What is the story with "line out" I use this all the time as I amp my headphones. So I assume you cant use line out? or is the remote a line out also.
And I assume the remote cable and you headphones act as the aerial, how is the quality? Is it any good indoors, some little FM radios I have used drop to mono indoors. Does this Apple one frop to mono if the signal is weak?
Someone that has one can perhaps answer
Cheers
Ray

I can at least answer some of the questions.
The RDS function on this radio/remote is poor in the
UK. You have to set the radio function on the iPod
to "Europe" and when you do this RDS info is not
displayed on almost all radio stations such as
Virgin, XFM, Capital, GLR, etc. It does display on
Radio 2 however. At least, this is my finding. So
it's unpredictable at best. Setting the radio to
"USA" on the iPod increases the likelihood of getting
the RDS to display, but the downside is that you can
then only tune the radio in increments of 2mhz which
is a bit awkward if your looking for 89.1mhz!
There are three settings for the radio which you
choose via the iPod. They are USA/Europe/Japan. No
setting for Canada, although I'm sure you will still
be able to use it over there as I can still use mine
here in the UK even if it's set to USA.
No, there is no AM radio.
You can plug headphones into the remote or the
headphone jack on the iPod, or both at the same time.
I'm not sure I understand your question about the
bottom of the iPod. The radio plugs into the iPod
via the dock connector.
There is no 'line out' on the iPod. If you mean the
one on the dock, then no you can't use it as you
cannot place the iPod into the dock whilst the
radio/remote is connected as they use the same
connector.
Yes the cable of the remote acts as the aerial.
Reception is surprisingly good where I am, but it
will of course depend on where you use it. I've
used it indoors without any drop in signal or it
dropping to mono.
Lastly, you need to update the software for both the
nano or the 5th generation for the radio to work
(after you do this a radio function appears in the
menu), and some users have found that doing this
screws up the iPod. I have mine working on both the
nano and the 5th gen without any problems.
There is a review of the radio/remote here. I like
mine and consider it a worthwhile accessory, but of
course there will be those who disagree.
iPod
Radio/Remote Review.
Thank you for the reply.
Think your right USA or Europe will work in Canada.
Yes I mean the line out via the dock, I just wondered if the remote become a line out socket (I also use a pocket dock for line out for headphone amp as I use a pair of Sennheiser HD600 with my ipod) but of course that is silly becasue you have a volume control on the remote and line out is normaly fixed.
Based on your views I shall get one in March when in Toronto
Cheers
Ray

Question about the new Yoga 10 HD+

Hi
A few questions about the new Yoga 10 HD+ which I hope you can answer.
I bought the old model last year. Loved the design and long battery time but a few major issues made me return it.
Somewhere I read that it can't read NTFS over USB so I presume that's the same with an NTFS formatted microSD card?
Can it read exFAT formatted microSD cards?
Anyone observed issues regarding audio over bluetooth?
(I know BT isn't exactly High End HiFi but the old Yoga 10 for some odd reason - most likely a driver issue which nobody cared to fix - sounded *much* worse with quite noticeably distortion while both my phone and a cheap noname tablet I have zero fidelity issues - no matter which of my bluetooth audio devices I tried aptX or not)
So to avoid buying this only to return it too I really would like to see if I can have my questions answered before buying it.
While I love the form factor and long running time the above issues are just two mayor dealbreakers to me. Bad audio quality = no joy listening to spotify, local MP3s etc. No NTFS or exFAT = no large movies.
My old noname android tablet really could use an upgrade so I'm really curious whether this can be it or I should look at the competition and sacrify form factor and battery runtime.
Thanks in advance.
EDIT:
If it's not supporting either NTFS or exFAT on the microSD have anyone tried ext3 and/or ext4?
I mean with Androids Linux roots it should be a nobrainer to support at least when it comes to royalties unlike NTFS or exFAT where there *might* be some issues with Microsoft.
Solved!
Go to Solution.

Thanks!
OK. Seems I should just stay clear of this and look elsewhere
Sony for sure I know support exFAT. I'm usure about Samsung. Odd it seems so hard to find out. File sizes of +4 GB should be taken for granted - it's not 199x anymore...
Oh well. Wonder whether to just go for one from the competition or perhaps just save the money and wait until 64 bit catches on. Rumors is that the next Nexus 8 will be 64 bit... (I really don't expect an answer on this)

MSI GTX560 Ti Hawk - can a pc case make a difference.

Can a PC case make the components sound worse?
I've got the Antec Def-Con 35 and the entire pc sounds very noisy - i mean i can hear the computer is switched on even from across the hallway.....I've got the MSI GTX560 Ti Hawk and according to many reviewers like http://www.tweaktown.com/reviews/4049/msi_geforce_gtx_560_ti_hawk_video_card_review/index17.html
the graphic card is a very quiet card with high performance.
Do you think another case can make a difference? My friends i7 with GTX460 in a NZXT Hades case has a very nice soft whoosh playing BC2 at full graphics while mine is definitely much louder.

I've had a 260 GTX OC Twin Frozr, 465 GTX Twin Frozr ll, 460 Hawk Twin Frozr ll and now a 560 GTX Ti Twin Frozr ll and none of then made much noise till fan speed went over 70-75 % running Furmark on them. In normal daily use the front fan in my case makes more noise than anything else in it. I would bet that all of those case fans you have are probably making too much noise. I have 1 front & 1 rear case fan and they are all that's needed to keep noise down & provide enough airflow for cooling my rig in the Cooler Master Elite 330 case. If your 560 is running to hot and the fans at high speed then remove the HSF on it and replace the TIM on it There seems to have been quite a few MSI cards that needed this done. I guess I was one of the lucky ones that didn't have that problem.
Take a cardboard tube like what paper towels come on and isolate what fans are making the loudest noise.

Questions about the T410s

Hey guys,
I'm considering buying the T410s because my last laptop was a Dell XPS and the GPU burned down after two years. I am a college student and I use my laptops quite extensively for homework, flash games, TV and movies. And I have a couple of questions about the T410s.
1. Due to my previous experience with my Dell XPS, I am looking for a more reliable laptop. So would I have to worry about the T410s heating up/burning down or breaking in like two years?
2. I am not much of a gamer, but enjoy videos sometimes. Will the Intel graphics card be able to run 'not so intense' games like Starcraft 2?
3. Also, would the 4gig of RAM be sufficient to run the Windows 7 64bit smoothly or I should choose the 32bit instead?
Thanks!!
Solved!
Go to Solution.

1) your Dell XPS used the Nvidia GPU? That won't happen in the new T410s.
2) the Intel 5700 MHD GPU can handle 1080p easily, but games like Starcraft 2 may only played on low to med settings.
the Nvidia GPU Optimus GPU option would allow 4 LCD support through the dock, if you ever want to connect that many LCD in the future.
3) 4 gigs is fine for 64 bit OS.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

4 questions about the the top boxes - SD box and Home media DVR

Hello. I am going to be getting Fios soon and I have some questions about the boxes. I will be getting the Home Media DVR and 4 SD boxes.
1) Do these boxes have timers on them to set so the box can turn off at a certain time?
2) Do these boxes have parental control and if so is it good enough to block things that I do not want my child to see?
3) How many people can access the home media dvr at the same time to watch already recorded programs
4) If the Home Media DVR is in the family room can a record be started from the bedroom over the SD set top box (even an hd show)?
Thanks for any help.

I have been using two Standard Set Top Boxes for about a year. I have Parental Controls on and all channels locked. When I want to watch a channel, I tune to that channel, note the LOCKED message, which tells me to press the OK button to enter ther Parental Controls PIN and unlock the channel for viewing.
This has worked flawlessliy for the last year -- ON THE Standard STB's.
I just ordered the Home Media DVR STB to replace one of my Standardt STB..
On the Home Media DVR:
I can set the Parentals Control PIN and lock the channels, in the exact same way I did o nthe Standard STB's. However, when tuen to ANY channel, I still ge the LOCKED message and instructions to press OK to unlock the channel -- BUT no matter how I press the OK button, the Enter your Parental Conlrols PIN dialog box willl NOT open. Nothing happens -- you CAN NOT view any channel.
Again, it is the EXACT setup as for the Standard STB, but the OK button will NOT unlock any of the channels.
If you unlock all channels and LOCK the Ratings, the same problem recurs: OK buitton will never open the "enter your PIN" dialog box.
I have received two replacement boxes and have spent hours on the phone with some very capable and helpful Techs -- no luck.
Has anyone else had the same problem? Here's how to test your Home Media DVR:
1. Menu-Settings-Parental Controls.
2. You will be prompted to CREATE youre Parental Controls PIN
3. Enter you PIN twice.
4. Use the > button to scroll to Enable On/Off and set it on.
5. scroll down to Control Channels
6. Press > button to See Locked Channels
7. Scroll down to Add/Remove Channels
8. Scroll right to choose LOCK ALL
9. Press OK and then scroll to YES to lock all channels
10. Press EXIT to get out of settings.
11. All channels are now locked.
12. Go to any channel
13. A black screen will appear with a lock silhouette with the word LOCKED below, followed by instructions to Press OK to enter PIN and unlock this channel. (plus how to change locks...).
14.Press the OK button and, if it is working, you will see a dialog box at the bottom of the screen that is titled: UNLOCK, with the channel listed and the instructions to "Enter your PIN using your numeric pad on remote to naje this channel availabe for all users." THere's a PIN box, which shows asterisks for each number entered, with "Press Exit to Cancel" below.
15. On the Standard STB, it works exactly as described in steps 1 thru 14. On the Media Center DVR, it works up to step `13, but in 14, no matter how you press the OK button, the UNLOCK dialog box never pops us. The Remote STB light flashes on the remove and the REMOTE yellow light flashes on the DVR, but nothng happens.
If you have a Home Media DVR, can you please try this and see if it works?
Thanks,
John

MSI GTX560 Ti Hawk - how to update bios?

I can' install Live Update v5 to my Win 7 64 bit PC - does anyone know if that's a problem - there's an error at the end of the install.
How can i update my MSI GTX560 Ti Hawk bios?

Quote from: kot0005 on 04-November-11, 13:19:40
Bios: http://www.mediafire.com/?12mupn50trj4m4n
Yes
Quote from: tovalb on 04-November-11, 22:34:53
can you please check mine as well ?
MSI N560GTX-Ti Twin Frorz II/OC
S/N: 602-V238-16SB1101161349
bios: 70.24.0A.00.00
Link to bios:
http://www.filemail.com/dl.aspx?id=YXCVIXBEDGLYAAE
Is my VBIOS up to date?
Tovalb
No, check PM

Re: Question about the Satellite P300-18Z

Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?

Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

MSI GTX560 Ti Hawk - question about the last bios release ?

Similar Messages

Maybe you are looking for