Msi gtx560-Ti Twin Frozr 3 Issues

Hi,
My friend just sold me is msi gtx560-ti Hawk one week ago.The issue is that when i play a games for exemple Payday 2,after 5 minute of gaming my pc does a random reboot.
Spec:
Motherboard: Gigabytes 970A-DS3P
CPU:AMD Fx-8350 Eight-Core
Video Card:Msi gtx560-Ti Twin Frozr 3 Hawk
PSU:RocketFish 550W
HDD:2011 Seagate Barracuda 1tb
On the video card there is 8 red del light up(Bad?) and in the pc of my friend they were blue.Is it a problem of PSU?
Edit 1:I googled on internet and find nothing helpful so i decided to post in on the ''official'' forum

The only thing that was in my pc before i sold it was my PSU.
I just received last week from Ncix my CPU,8gb RAM and the motherboard.
The video card specs recommend a 600W PSU,but before buying a 700W PSU (just to be sure) i wanted to know if its really the problem.
I read on some forum that the led shows the power charge.So logically if its all blue its fine and if its all red its not?
Edit 1:The PSU was working very well in my old Pc.
Motherboard:Gigabyte MA785G-UD3H
CPU:AMD Phenom II X
Video card:Sapphire Radeon HD 5850
Ram:4gb ddr2+

Similar Messages

Afterburner 2.3.1 works on MSI GTX560 ti twin frozr II OC?

Hi:
I would like to know if Afterburner V2.3.1 will work without problems whit my "MSI gtx560ti twin frozr II OC".
In de readme file of afterburner i see:
Requirements
NVIDIA GeForce 6 or newer series graphics card with NVIDIA ForceWare 96.xx or higher drivers
Thanks

Quote from: Svet on 10-April-13, 19:32:58
should works
Thank you very much

MSI GTX560 Ti Twin Frozr II OC freezing/throttles

Hi there.
I have a few problem with my GTX 560 Ti - especially when playing Crysis 2. I can play from 5 minutes and up to about 30 minutes before it will freeze and eventually downthrottle to lowspeed state or, 405mhz core clock, making the game unplayable. This happens for world of warcraft too but here it will not throttle, only freeze for 5-15 seconds.
Okay, so i read another post where Svet came with some interesting tips and i tried all of those with the reinstall of Win7 as the last option. Something weird happened now, it would still freeze but not throttle instead it would just freeze occasionally. Then i tried to lower the voltage to .987v which then resulted in a freeze and now all of the sudden it would throttle back to 405mhz.
Heres some info:
Video BIOS-version: 70.24.0A.00.00
Driverversion: 270.51
And a list of what i tried so far in the order:
Increase the voltage from 1.112mV to 1.125mV and eventually to 1.138mV without any luck. (Throttled)
Adjusting nVidia settings to maximum performance etc. (Throttled)
Downclock from stock 880mhz to 822mhz (Throttled)
Reinstall OS & Driverversion 270.51 (Runs crysis 2 smoothly but with occasional freezes - the throttling stopped)
Lowering voltage to .987mV on the fresh win 7 (Freezes and throttling started again)
At this point i'm clueless, i'm not a graficcards expert but this somehow looks to me as a rather odd problem.
I have attached images to give a more clear view of whats happening during the Crysis2 game.
I would like to hear your suggestions/tips.
Thanks in advance, Kasper.

Quote from: iddqd on 08-April-11, 20:38:02
I have tested both the MSi vga drivers and the latest official nvidia drivers on my old install of Win7 - I have not tried anything else but the 270.51 on this fresh Win7 install.
well try them again anyway
another thing:
Quote
Video BIOS-version: 70.24.0A.00.00
you're running older vbios version for your card.
you can flash to the latest one for your card, check PM for details.
i doubt that will help for your issue, as other people with the same vga with the same problem,
they already running the latest version and problem remain, but you can have a try anyway, before RMA

Red Screen with SLI MSI GTX560 Ti Twin Frozr II/OC

Hi at all,
A few days ago I received the two cards I mentioned in the title of the thread.
I proceeded to uninstall the current drivers on my PC and remove the GTX285, then mount the two GTX560 and install the latest drivers 285.62 (SO Windows Seven 64-bit).
Basically I have a problem, especially when I play Crysis 2 (but I also happened with other games) that the display turns red, as you can see here.
Note that this problem only occurs when I close the game or do alt + tab, or less rarely when I open the game. In addition, to bring back the normal screen, it is sufficient to start any game or unplug and replug the HDMI cable to the video card.
In addition, disabling SLI or even leaving a single card attached (regardless of the card and the PCI-E slots used) the problem does not occur.
What can be?
I also wanted to know one thing: one of the card has problems of dissipation, it also has temperatures of 20° C above the other (tested individually).
Since the SLI and a lot warmer during exercise (I tried it with FurMark) the card heats up dangerously (more than 90° and I saw even reach 100° after a few minutes of testing), I would request the replacement of the card to the dealer or MSI for this defect?
Davide
ps: sorry for my english

I got to do other tests. Consider that I have 2 monitors connected (Asus VK246H and Samsung TV HD Ready) and the problem occurs only the Asus monitor.
In summary:
A single card: Ok
With SLI active: No
With SLI off: Ok
Connecting via VGA cable: Ok
Changing the DVI cable: No
To which I add these others:
Changing the SLI connector (with an identical one, Asus 08G160001240): No
By connecting the monitor to the secondary card: Ok (the same as flipping cards, keeping the monitor connected to the primary vga the problem occur itself, connected to the secondary does not occur).
By connecting the monitor with an HDMI cable instead of DVI: Ok
What else can I do, whereas I've found that is not an OS or driver problem and that the two cards individually do not have this problem?
It could be a problem of DVI on the monitor? And if so, why does it only with SLI enabled, there is difference in the signal that comes from a single VGA and the signal that comes from a VGA with SLI enabled?

MSI GTX560 Ti Twin Frozr II/OC Temperature

Every time that I play games the GPU temp always goes sky high to 99c. Would this be bad for my card? My case has 2 intakes and 2 outtakes. What should I do?

I am going to assume you use a user defined fan profile, or so I hope.
The card is clean?
Try opening the side of the case and see if that helps,
other wise you may need to look at what your intake out takes are,
as to say just having them isn't enough if the placement isnt right.
Intake front, outake to rear.
You've really offered very little info,
perhaps a picture and some more info on your setup would be nice

MSI N560GTX-Ti Twin Frozr II/OC: Graphical Glitches/Corruption

Hello, I bought and installed an MSI N560GTX-Ti Twin Frozr II/OC video card one week ago. For the last week, it has been running perfectly, but today when I started up a game the 3D graphics began glitching and showing random stretched triangles and distorted models. While the 3D graphics are running, the monitor randomly loses signal from the video card and occasionally the program will crash with a popup bubble stating that the NVIDIA driver has recovered from a problem.
After reading through some posts here, I downloaded the MSI Afterburner program, enabled voltage monitoring, and set everything to defaults.
The defaults are:
Core Voltage: 1000 mV
Core Clock : 880 MHz
Shader Clock : 1760 MHz
Memory Clock : 2100 MHz
When I click the button to run a Kombuster stability test, the 3D has the same graphical glitches that I saw in my games. Here is a screenshot:
http://i733.photobucket.com/albums/ww333/MP64x2/corrupted_880.jpg
I tried lowering the Core Clock speed and retrying the test. It appears that the level of corruption is proportional to the clock speed. At the minimum clock speed of 440 MHz, the graphics are almost perfect, however a glitch or two will still occasionally show up.
Here is the test at Core Clock = 705 MHz: http://i733.photobucket.com/albums/ww333/MP64x2/corrupted_705.jpg
and at 440 MHz: http://i733.photobucket.com/albums/ww333/MP64x2/corrupted_440.jpg
- I've tried bumping up the Core Voltage a little to around 1020 mV, but it doesn't seem to have any effect.
- Lowering the Memory Clock also reduces glitches, but they never go away completely.
- Even at the absolute minimum clock settings, my games still glitch and crash.
- I do not have access to another system that I can try the video card in.
System Info
CPU: Intel Core 2 Quad Q9450 2.66GHz
MoBo: Abit IP35 Pro - LGA775, Intel P35, FSB1333
RAM: G.Skill 4x2GB DDR2 800 (PC2 6400) Dual Channel (Total: 8GB)
Video Card: MSI N560GTX-Ti Twin Frozr II/OC
Video S/N: 602-V238-130B1103126135
Video BIOS: 70.24.11.00.00
NVIDIA Driver: 266.66
Hard Disks: 2x 640GB Western Digital WD6401AALS
OS: Windows 7 Ultimate 64-bit
Power Supply:
OCZ GameXStream OCZ700GXSSLI 700W
+3.3@36A,+5V@30A,+12V1@18A,+12V2@18A,+12V3@18A,+12V4@18A,[email protected],[email protected]
As I type this I'm starting to get corruption right on my desktop too, with random pixels changing color and black rectangles appearing on applications.
From what I've read in other threads, it seems like my power supply may not be sufficient since it has multiple 12V rails, but before I spend ~$100 on a new one I thought I'd see if anyone had any other thoughts.

Quote from: MP64 on 22-April-11, 03:46:20
I have an interesting update on my original problem.
A week after I reseated the card, the graphical glitches returned. I turned the computer off, reseated the card again, turned it on, and it began working fine.
Another week goes by with no problems, and then a couple days ago the glitches came back. Thinking it strange that the card could somehow take approximately the same amount of time to cause the same kind of bad connection, I wondered if there was something else that was causing the glitches to temporarily disappear.
I tried rebooting my computer, but the glitches remained.
I then completely turned off my computer and pulled out the power cord and left it for a couple minutes. I didn't open the case at all and made sure not to do anything that would bump any components. I turned the computer back on - glitches are gone once again.
So, it would seem that it may in fact have something to do with the power supply and not any bad connections with the card itself - at least, that's the best guess I have at the moment. I leave my computer on 24/7 so it seems like it doesn't like being left on for an entire week with this new video card installed.
Does this sound sensible? Is it possible for a power supply to slowly fail over several days, only to start working again after being powered down for a couple minutes?
Did you ever figure your issue out? I have the exact same issue. My system runs fine for almost a week...and then my desktop starts artifacting. The only way it goes away is to unplug my pc (or flip the switch on PSU). Then it runs again perfectly for nearly a week again and I start getting artifacts and the message stating that the graphics driver has stopped working and then recovered.
I also run my pc 24/7 and this problem is getting very annoying! My PSU shouldn't be a problem as I have the PC & Cooling 750W...
Oh...almost forgot. I've seen the same issue on 2 video cards now. RMA'd the first one and the second one does the exact same thing...

MSI GTX 560Ti TWIN FROZR II 1GB GDDR5

Currently I'm experiencing a problem where no matter what I'm doing, whether it is gaming or browsing, green/orange chequered squares appear exactly as in the picture below:
The problem lasts for a matter of seconds and then windows informs me that the drivers have recovered from a failure. This is very remininsant, but not identical, to when I had a 9800GT that died. This issue has only started within the last month and the card is over 6 months old. Is this likely to be a GPU issue?
M4N72-E Windows 7 64 Bit Phenom II X4 950 3.0Ghz
Kingston Hyper-X 1066Mhz CL5 8GB @ 800Mhz CL4
MSI GTX 560Ti TWIN FROZR II 1GB GDDR5
Inno3D GT240 512MB GDDR5 iChill
Sony AD-7240S 24x DVD±RW DL & RAM SATA Optical Drive - OEM Black
Seagate ST3500418AS 500GB Hard Drive SATAII 7200rpm 16MB Cache - OEM
Thermaltake 500W PSU

Sadly I've no way of testing the card in another PC or a different PSU.
What is the likelihood that it is the PSU even though the card has been performing flawlessly for almost a year? Also I could understand if it was causing artifacts just when gaming due to power load, but it happened when I was merely surfing the net, where power draw doesn't even reach 300W.
Is a known solution to this issue an increase in Watts or is there a chance that it is a problem with the GPU?

MSI N560GTX-Ti Twin Frozr II OC causes system to freeze

I'm having occassional freezes with my GTX 560 Ti Twin Frozr OC (system completely stops responding while display and sound freeze and it takes around 5 seconds for the PC to respond to reset button ie. to reboot). This happens, for example, under Windows 7 in 3DMark11 Deep Sea Demo and in Windows XP randomly, but most often in web browser when watching Adobe Flash content with hardware acceleration enabled? Maybe BIOS update could help? Thank you in advance.
My system specs are as follows:
Intel i5 2500k
MSI P67A-C43 Rev1.0
EXCELERAM 2x2GB E30101B (XMP selected in BIOS - 1600MHz)
MSI N560GTX-Ti Twin Frozr II OC
WD Caviar Blue WDC WD5000AAKX-001CA 500GB Sata 3.0
Dual Boot: Windows XP Pro SP3 32-bit updated / Windows 7 Ultimate SP1 64-bit updated
OCZ Stealth Xstream OCZ500SXS 500W +12V1~18A +12V2~18A, +5V~30A, +3.3V~30A

This is strange! I've just discovered that if I turn off C6 state (it's no problem to leave c states enabled, only need to set c state limit to C2) the freeze issue is gone. I guess my i5 2500k doesn't like c6 state or there is some kind of incompatibility between Intel C states and Windows or MSI P67A-C43 is ready for another BIOS update after version 1.9. What do you think Svet? After some quick googling on this issue I found out that Nehalem CPUs had somewhat similar problem.

BIOS request for 2×MSI N560GTX-Ti Twin Frozr II/OC V238-059R

Dear sir or madam,
Please provide me the BIOS for the MSI N560GTX-Ti Twin Frozr II/OC V238-059R. I have two of them. My system now sees them as NVIDIA GeForce GTX560 Ti (no OC). I can't update drivers anymore.
The serial numbers are:
S/N:602-V238-35SB1201030210
S/N:602-V238-35SB1201030151
The NVFlash output is:
NVIDIA Firmware Update Utility (Version 5.190)
Simplified Version For OEM Only
BIOS Versions of NVIDIA display adapters present in system:
<0> GeForce GTX 560 Ti (10DE,1200,1462,2382) --:NRM 70.24.2E.00.02
<1> GeForce GTX 560 Ti (10DE,1200,1462,2382) --:NRM 70.24.2E.00.02
Thank you in advance!
Sebastiaan Smit

latest vbios version attached below
Quote
I have two of them. My system now sees them as NVIDIA GeForce GTX560 Ti (no OC).
there is no OC driver, it just detect the name.
this is not issue

MSI N560GTX-TI Twin Frozr II/OC frezzing

I have question about MSI N560GTX-TI Twin Frozr II/OC .
I bought it 2 weeks ago and i get frezzing screen, audio goes like trrrrrr for about sec or two and then everything stops
i have picture but i cant do anything ctrl+esc, ctrl alt del, nothing works, mouse stops, everything is like dead.
Ventilation is working even when that happens.
i dont get blue screen, no error, nothing.
any ideas?
system:
amd x6 1090t
seasonic 520w
4gb kingstone hyperx ddr3
asrock 890gx extreme 3
MSI N560GTX-TI Twin Frozr II/OC
1tb samsung

I am having the same issue with the same card, can you please explain about applying reference clocks. I have msi afterburner.

MSI|N560GTX-TI TWIN FROZR II 2G Fan Noise

Hi, I purchased a MSI|N560GTX-TI TWIN FROZR II 2G from newegg.ca on November 21 2011. In the last month I have started getting a grinding noise on the rear fan upon start up of my computer, after a minute or two then grinding noise stops. Is there a way to fix this issue or can I get it warrantied?
Thanks, Brandon

You need to RMA for warranty.
>> How to contact MSI <<

Can MSI Radeon 7850 twin frozr III be used on MCP73M01H1 (Napa) ?

Hi guys,
I just bought new graphic card (msi radeon hd 7850 twin frozr 2gb) and seasonic 650W power supply today.
And when I put them together with other hardwares and turn on the power, the monitor doesn't not detect any signal (dvi).
so I switched the dvi cable to the on-board graphic card then the monitor can display but the device manager only detects ob board graphic card.
then I put back gt 130 and it works perfectly as before.
then I tried putting 7850 back then same issue (monitor doesn't detect anything)
I can see the fans are running on 7850. My friend tested it with his computer and it's working fine...
Help pls?
My current specs are :
Monitor: HP 2309m (1920x1080)
Motherboard: MCP73M01H1 (Napa)
CPU: Intel Core 2 Quad Q9400 2.66 GHz
Memory: 4 GB PC2-6400
Graphic card: msi radeon 7850 twin frozr III oc 2gb (previous one: GT 130 768MB)
PSU: seasonic 650W (previous one: 350W)

Yea. I've posted on their forum as well. But I was hoping the graphic card manufacturer will have info about the list of motherboards that support Radeon 7850 ??

Msi GTX 560 Twin Frozr II - Problem

Hey folks,
Im having a problem with my Msi GTX 560 Twin Frozr II video card.
I can't make it work with my monitor, all I get is "No signal detected"
I know the monitor is fine, because I used it as it worked all good when I plugged it into
my laptop. It's a BenQ G2222HDL monitor btw. It has one VGA (D-sub) and one Dvi-D input.
So i've tried all types of cables (VGA, Dvi-D and even Hdmi cables), and
still, can't get no signal. What can I possibly do to make things work?
Also, my computer acts a bit wierd when it's starting up. Usually, I would turn it on, then it would turn itself off really quick. Then I turn it on again,
and it goes just fine and runs smoothly. After I changed the position of some RAM modules
and such, it changed. Now when I turn it on, the fans spin for 1 and there's just a tiny bit of noise until
it turns itself off. Then I turn it on again, and it goes just fine with all fans and stuff spinning.
So, I really need some help!

Cpu - Intel i5 2500k, 3,3GHz, Socket LGA1155, 6MB with Noctua DH-14 CPU Cooler
Motherboard - ASUS P8P67 PRO, Socket-1155, ATX, P67, DDR3, 3xPCIe(2.0)x16, CFX& SLI, SATA 6Gb/s, USB 3.0, FW, BT, EF
Memory - Corsair XMS3 DDR3 4GB 1600MHz CL 9 (2x2GB kit)
Video card - MSI GeForce GTX 560Ti 1GB PhysX, PCI-Express 2.0,"Twin Frozr II", GDDR5, 2xDVI, native-miniHDMI, CUDA, 256bit (GF 114, overclocked to 880 Mhz on the core), (Marketing name; N560GTX-Ti Twin Frozr II/OC)
Harddrive 1 - Crucial Real C300 (64GB - 355/75 Mb/s read/write) SSD
Harddrive 2 - Samsung Spinpoint F3 7200RPM, SATA 3.0 Gbps, 3,5", 16MB Cache, 8.9ms
Chassis - Fractal Define R3 Black Pearl Mid tower chassis (ATX, mATX, mITX) with two 120mm fans
Power Supply - Corsair HX Series 750 Watt Modular 80 plus silver (ATX 12v 63 amp)
Haven't got a chance to install os, but will install Windows 7 64Bit.
The monitor is a BenQ 21,5" LED G2222HDL (1920 x 1080, 5000000:1, 5ms, VGA/DVI-D)
More background info; I build the computer myself. Everything went mostly fine, except for that I had to spend quite a long time to get everything right.
I started the machine, and it all went just fine (except for rebooting and then running smoothly, as it has done ever since). I did the MemOK! test and everything seemed to be fine. But when using the VGA cable that came with the monitor, I couldn't get any signal detected (I used a VGA to DVI adapter to plug the VGA cable into the Msi 560 TI videocard). I used 2 different adapters, but nothing happened. I tried with a HDMI cable, just to test, and that did not work either. Then, I figured out I should order a DVI-D cable.
So I ordered the cable, and went on to plug it into my monitor and my video card, no adapters needed. Still, no signal at all! Tried a different monitor to check if it was the monitor's fault. Nope, still no signal. Frustrated, I used the VGA cable again and tried to plug the monitor into the laptop, which worked just fine. A clear, bright image appeared. But not with my desktop computer with the Msi GTX 560 Twin Frozr II. Nothing works when I plug in the cables etc. No signal at all, although the computer itself seems to run just fine with fans spinning up and the different components making noise etc. Thus, I figured out there probably was something wrong with my Msi Geforce GTX 560 TI Twin Frozr II. Now I dont really know what to do.
Does anyone have an answer/advice/possible solution to my problem? I'm getting a tad frustrated now, seeing as I bought this computer 2 weeks ago and still haven't got to use it yet.

MSI GTX 770 Twin Frozr 2GB OC Bios question

I got the MSI GTX 770 Twin Frozr OC 2gb version and would like to know how to verify if I have the newest bios for the gpu.
This is the newest version listed on the website : http://www.msi.com/product/vga/N770_TF_2GD5OC.html#download
And thats an ss from GPU-Z, cant find the exact bios version in that downloadable zip from msi website and i cant seem to find the date created for the bios I have on my card now.
Having some problems with gpu load drops and microstuttering, so wondering if a bios update might sort out my problems.

The vbios on MSI site is a different vbios series (NV282MS.331) and older than your current vbios. Your vbios (NV282MS.352) is dated 06/18/13 while the one from MSI site is dated 06/11/13. Both are legacy vbios versions (no GOP support). You can try the latest hybrid vbios (GOP support) which is NV282MH.351. It is attached.
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

MSI GTX 670 Twin Frozr

MSI GTX 670 Twin Frozr fan seems to make a fast clicking noise when not under load or cold. Have to start up something that's graphics intensive to get it to stop. This clicking noise starts a few seconds after dust off. Anything that I can do from here? Still under warranty.
Great card otherwise.

check if the VGA FANs are touching something

Msi gtx560-Ti Twin Frozr 3 Issues

Similar Messages

Maybe you are looking for