MSI GTX570 POWER EDITION helppp

Hi, I just bought my MSI GTX570 POWER EDITION from amazon. And it seem to be some problem about this card. It runs poorly on the 3d mark11. And on starcraft2 it recommend the setting to only "meduim, suggested for 258VRM" but aren't the gtx570 is equipped with 1280VRM. Is there something wrong with my card? I have updated all the newest drivers already.
3d result http://3dmark.com/3d...8UuRNSxXxfNyXL9
print scr http://tinypic.com/r/xm5wz8/7

Quote from: freshlemon on 26-August-11, 12:27:02
it says, "Your Score is Low Compared to Similar Systems.
There may be a problem."
is there anything i can do to improve the performance?
It's not low, as you can see the most people with the same card has the same scores and they are into the same big graph as you
Quote from: freshlemon on 26-August-11, 12:27:02
is there anything i can do to improve the performance?
Overclock CPU or install fastest CPU or OC the GPU further or both

Similar Messages

[Request] UEFI GOP VBIOS for MSI R7750 Power Edition

Hello, I need a GOP/UEFI Vbios for MSI R7750 Power Edition.
S/N: 602-V271-08SC1208010276
ROM: goo.gl/tphw4h
(Temporarily I have no permission to post a http link, so I had to give a shorten one.)
Regards!

here it is
for flashing: http://www.techpowerup.com/downloads/2306/atiflash-4-17/
flash syntax from pure DOS, after booting from bootable USB key:
atiflash -p -f -noaper 0 xxx.rom [ENTER]
where "xxx.rom" will be your vbios file which you want to update

PC suddenly restarts while playing games MSI 660Ti Power Edition OC 2GB

Hi,
I have the following problem since I replaced my graphics card (before 9800GTX+, now MSI 660Ti Power Edition 2GB) I got 3 random restarts while playing games. The computer is not overheating, the CPU's temperature is around 58-59 degrees after running prime95 for 3 hours. The graphics card temperature is 70 degrees after running furmark for 1 hour, the stress tests never failed, just when running games. The computer has been stable. For case cooling im using (2X12cm front, rear 1X14cm below 1X12cm and above 1X12cm +1 X14cm).
I got two random system restarts while playing Doom 3 BFG and one system restart after playing Wolfenstein for 4 hours. The PC just restarts itself.
What could be wrong? I have no more ideas? Should I replace the CPU cooler (im running the stock CPU cooler but all stress tests dont show overheating?!)
Is it possible that the PSU is the reason, but it should be strong enough ...
The system:
GA 870A-UD3
AMD Phenom II 1090T (cooler box)
MSI GeForce 660Ti Power Edition OC 2GB
12GB RAM (12GB Kit 3X4GB DDR3 Kingston Genesis 1600)
Samsung 256GB 840pro
WD Blue 500GB
Thermaltake Thoughpower Q-Fan 750W PSU
Housing NZXT Source 210 Elite
OS: Windows 7 Ultimate 64-bit
Thank you.

The temps for the graphics card are quite normal. I have the same one and under load it will go to 70 to 75C, depending on ambient. What Nvidia driver are you using? Did you do a new driver installation?
If I look at your CPU though, then you are very close to the max CPU temp and throttling may invoke the shutdown http://products.amd.com/en-us/DesktopCPUDetail.aspx?id=640&f1=&f2=&f3=&f4=&f5=&f6=&f7=&f8=&f9=&f10=&f11=&f12=
62C is max.
Could also be your PSU that's not completely stable and continuous power draw may cause Overcurrent or overtemp protection. Speculating here as to probable causes.
Another possibility is your RAM. That should normally be paired in 2's. Have you tested with only 2 modules ? Remember we don't support that MB here, but its just another test I would run. But you would know, probably having run it like that with the previous GPU.

MSI 670 POWER EDITION SLI HELP!

Okay so i recently bought another MSI 670 Power Edition card. I loved my original and wanted a bit of a performance boost.
I run a MSI Z68 GD80 G3 mobo with i7 2600K. 16GB of Corsair Vengeance memory.
So after a few days of testing i get about 10-20fps increase in certain games. Now after comparing my PC to other Computers with similar specs and my cards are faster than theres.
I am not getting that much of an improvement as i should.
On unigine Valley "Everything max at 1920x1080" i get a score of 2333 thats with both cards. To me that seems rather low or am i being silly. Also i was watching a video of a guy running the Metro Last Light benchmark and he was hitting over double what i had in terms of FPS.
Then i read that it could be because i have a sandy bridge and it doesn't utilize PCI.E 3 correctly. Any help would be awesome THANKS :D

Quote from: rydek on 14-July-14, 02:34:20
I run a MSI Z68 GD80 G3 mobo with i7 2600K. 16GB of Corsair Vengeance memory.
Then i read that it could be because i have a sandy bridge and it doesn't utilize PCI.E 3 correctly.
As flobelix stated before, you are limited to PCI-E 2.0 because of your Sandy CPU.
Talking about bandwidth, SLI with PCI-E 2.0 x8-x8 is the equivalent of PCI-E 3.0 x4-x4.
Not very good, but not very bad either.
Quote from: rydek
unigine valley sli - 2349
unigine valley single original card - 1718
Tomb Raider Tress FX off everything Ultra average FPS 62.7 - SLI
Tomb Raider Tress FX off everything Ultra average FPS 36.3 - Single GPU original
Your scores are ok.
With a better CPU (i7 3770K), the scores are around 2200 (single) and 3000 (SLI).
Those with higher scores have overclocked GPUs (and CPUs).
Tomb Raider is one of those few games with great SLI scaling (most of the games are not).
As you can see, you get a 70-75% boost in this game.

MSI 7750 Power Edition OC.. Overheating .. please help.

i bought msi 7750 power edition. it's idle temp remains constant at 39` and while playing games like darksiders, temp reaches 79` even with moderate or low settings. the fan on such temp reaches max speed .. 99% and makes it really noisy. is the temp normal or is there any defect wid my piece ? .. Please Reply

Temp is absolutely normal under load. Anything below 9ß°C is nothing to worry. Try using Afterburner (>>How to use MSI Afterburner<<) and start Kombustor out of it to check tempa under maximum load.

MSI GTX660TI Power Edition problems

Hi all,
I have a problem with Battlefield since I have installed my new GPU the MSI GTX660TI Power Edition.
I have a Acer Aspire i7, with 6GB memory and a Corsair GS 800W, Windows 7 Home Premium
Since I have installed my new GPU my game freezes and my systems tells me that there had been a problem with the Nvidia Windows Kernel mode and that it has been restored.
It happens with both BF3 and BF4....while typing this topic message the same thing happens.....
It also says Directx error....but I have the latest drivers....
Could it be the Bios, mainboard or is my GPU not working as it should?
Thanks for your help.

List full system specifications, read >>Posting Guide<<

MSI R7850 POWER EDITION 2GD5/OC vs TWIN FROZR 2GD5/OC

I had to do an RMA with MSI for the R7850 POWER EDITION 2GD5/OC I had, and it turns out they don't have anymore inventory of it, so I'm accepting a R7850 TWIN FROZR 2GD5/OC as a replacement.
The only differences I can spot immediately are that I may lose voltage control, the Core clock comes slightly lower, and the heatsink is model III instead of IV.
I imagine I can just overclock with Afterburner if needed to up the core clock; I'm wondering if voltage control could also be unlocked though? Also is there any other difference that I should be aware of?

general difference between Power Edition and models with Twin Fozr,
is that Power Editions has Enhanced PWM Design and offers triple voltage control [compared to regular model: + memory voltage and + Aux voltage]

MSI 670 Power Edition -- need to disable the Dust Removal

I just bought a 670 PE and I wish to disable the dust removal because, having a filtered case that's quite free of dust, it is of no benefit to me and only an annoyance (my system is very quiet, having the fan spin that loud is ridiculous).
It sounds like in the past there was a BIOS on the German website that did this, but I no longer see it there (I tried the one that is listed in the BIOS section there and it does nothing different).
Does anyone happen to have that particular BIOS? Very surprised that MSI does not officially provide this.
Also while I'm at it, has anyone solved the issue with these cards throttling when overclocked? Changing the power limit seems to do nothing. I'm pretty sure it's a BIOS issue.

Quote from: rydek on 14-July-14, 02:34:20
I run a MSI Z68 GD80 G3 mobo with i7 2600K. 16GB of Corsair Vengeance memory.
Then i read that it could be because i have a sandy bridge and it doesn't utilize PCI.E 3 correctly.
As flobelix stated before, you are limited to PCI-E 2.0 because of your Sandy CPU.
Talking about bandwidth, SLI with PCI-E 2.0 x8-x8 is the equivalent of PCI-E 3.0 x4-x4.
Not very good, but not very bad either.
Quote from: rydek
unigine valley sli - 2349
unigine valley single original card - 1718
Tomb Raider Tress FX off everything Ultra average FPS 62.7 - SLI
Tomb Raider Tress FX off everything Ultra average FPS 36.3 - Single GPU original
Your scores are ok.
With a better CPU (i7 3770K), the scores are around 2200 (single) and 3000 (SLI).
Those with higher scores have overclocked GPUs (and CPUs).
Tomb Raider is one of those few games with great SLI scaling (most of the games are not).
As you can see, you get a 70-75% boost in this game.

BIOS Update for the MSI GTX670 Power Edition Card

There is a Bios update for the MSI GTX670 PE video card but it's for a hybrid card. What is meant by a hybrid card and how do I know if this applies to my video card? Any help would be appreciated in advance. Thank you. I do know that I can't for some reason or another install the Msi Update program for this card. It keeps saying that you have to be the administrator and Iam the administrator on my system. I do not understand.

You can use windows version of it to flash it:
>>Download NVFLASH for windows<<
syntax from cmd:
nvflash -4 -5 -6 myrom.rom [ENTER]
where myrom.rom will be your vbios file

Msi R7770 power edition 1GD5/OC dual monitor advice

Hi guys
I'm hoping someone can assist me. I have the msi r7770 graphic card installed on my pc. I would like to set up my first dual monitor display, but I am unsure what cables I need to connect two screens with and which two of the three ports on the graphics card to use.
Can anybody offer me some advice.
Peter

ok the card has 3 ports! any 2 of the 3 in combination should be perfectly capable of outputting a dual monitor setup!
DVI-I - thats the blue one and has digital and analogue pins
HDMI - Standard HDMI connector
Display Port - High Bandwidth Display signal output
usually with a card like that the best way to hook up 2 screens is 1 to the DVI-I and one to the HDMI port but if one of your monitors has a display port in on it use a display port cable as that port has much higher signal output bandwidth!
its hard to say what the best way is unless we know what monitors your planning to use?

Screen flashing/black screen for 1-2 seconds - 7850 power edition 2gb/OC

I recently bought the MSI R7850 Power Edition 2GD5/OC. I have installed amd catalyst 12.10. I have no issues while playing games...the only game i have played since i bought the card is prototype 2 (all settings set to high). The problem is while browsing or when not playing my screen flashes (just once - screen becomes black) for about 1-2 seconds. This does not happen regularly, but quite a few times.. i have uninstalled and re-installed the same catalyst version twice (downloaded from different sources - one from msi and the other from amd). The problem still persists.
Board: ASUS P8-H67-M PRO
VGA: MSI R7850 Power Edition 2GB DDR5/OC
PSU: Cooler Master GX550 550W (44a 12v rail)
Intel Core i5-2500K Sandy Bridge 3.3GHz (3.7GHz Turbo Boost) LGA 1155 95W
MEM: Corsair 1333 8gb (2x4gb)
HDD: Seagate 500 GB 7200 rpm
Thanks.
OS: Windows 7 64bit ultimate.

I've experienced the same issue exactly as described, with the R7850 Twin Frozr OC Edition. However, I've also experienced a crash or 2 in which the screen goes black and the monitor goes to sleep. The computer doesn't wake up and I'm forced to do a hard reset. One such event was severe enough that I was unable to restore Windows 8 and had to do a full reinstall...!)
Everything is clocked at factory default, passes Memtest 86+, Prime95 overnight run, even FurMark successfully...
Board: ASUS P8Z77-M
Bios: American Megatrends Inc., v1708
VGA: MSI R7850 Twin Frozr III 2GD5/OC
PSU: Seasonic X-750 (+12V@62A)
CPU: Intel Core i5-3750K
MEM: Samsung DDR3 PC1600 8GB (2x4GB)
HDD: WD 500 GB 7200rpm
COOLER: GPU: Stock. CPU: Xigmatek SD1283 Gaia w/Scythe 120mm Slipstream PWM
Sound card: Creative SoundBlaster X-Fi XtremeGamer
OC: No overclocking, factory default.
OS: Windows 8 Pro, 64-bit
When I tried to save the GPU-Z BIOS settings to a file, my computer crashed my computer (!)... Hopefully this is sufficient to indicate if I should follow the same steps or if this is a different issue / hardware issue / ???
TechPowerUp GPU-Z 0.6.7
Driver Version: atiumdag 9.2.0.0 (Catalyst 12.10) / Win8 64
BIOS Version: 015.017.000.000.000861 (113-C4030400-100)
edit:
S/N: 602-V273-010B1210251006
Also updated format of table above
(Perhaps worth noting that the box didn't include any driver CD for some reason)
Thanks for the help.
-DH

MSI GTX570 TwinFrozr III Power Edition: Unstable at stock unless fan is 100%

Hello Everyone,
I got my GTX 570 TwinFrozr III Power Edition yesterday and I like it a lot. I've been testing it and running it through various benchmarks and games to find the best stable overclocks with Afterburner. By doing this I noticed a few things that lead me to question if there is a problem.
Before I started trying to overclock, I ran the card at the stock settings 770core/1540shader/2000memory @ 0.962v and tried various benchmarks and stress tests. Immediately I noticed there were errors and artifacts. I tried to increase voltage and I noticed that the artifacts and errors were going away, so I thought maybe my VID was too low... at 1.012v it seems to be error free at stock settings.
I tried another thing as well, I left the card at stock VID (0.962v) and put the fan speed to 100% and I noticed all errors and artifacts completely gone. So I lowered fan speed to 70% because 100% is too loud for me and 70% is still pretty loud but it's better... I found that at 70% I still got some errors but not a lot. Let me just say that my GPU Core temperatures are amazing. never over 62c.
So now I don't know if there is a problem with my card or the factory just gave it too low of stock VID. I think it's kind of weird that at stock settings that the card would produce artifacts and errors unless the fan speed is at 100%. I'm guessing MSI factory tested stock overclocks with 100% fan speed?
I love this card, but if I ever resell in the future and someone installs this card they will think its broken.
Let me just state that finally, the card is an overclocking monster. I am now at 950core/1900shader/2300memory @ 1.082v without any errors... The only problem I have is that when I run unigine heaven I see some of these graphical anomalies. Here's an example I found online which is exactly what I see. http://fotohost.lv/images/n6azp80ru74so1ecp009.jpg
So far I'm not sure what the cause is for that... but I think that when I put the fan at 100% I didn't see it. I could be wrong, but I will test again when I wake up tomorrow.
Thanks MSI.

Thanks for the reply Henry, but the problem here is that it wasn't stable from the factory at their settings.
Do you understand how this can be problematic for me if I ever decided to sell the card? It is no problem for me to raise the voltage at all. I think this card is phenomenal, but if I ever sold this card to someone else who doesn't want to or know how to overclock or adjust voltages, it would be classified as a broken or faulty video card.
Also scratch the stability at 100% fan speed. I still get some errors, although not many. The card seems to be stable around 1.018 volts at default overclocked settings.
I just didn't expect MSI to make a mistake on the stock VID. If there were a way for them to fix it through a bios update it would be great.
Edit: Just for the record, the card is a great overclocker and is very stable. The only gripe I have is that it isn't stable at default frequencies unless I bump voltage to 1.018. This is no problem for me, but if I ever were to sell this card, I would have to have a disclaimer that it is unstable unless you put voltage higher?
I'm just trying to figure out if this could be some oversight on MSI's part and if it isn't, could my card not have been quality inspected?

MSI GTX570 TwinFrozr III Power Edition: Unstable at stock settings | SPLIT

Hello,
Same problem with my card also same model GTX 570 Twin Frozr III Power Edition/OC not stable at stock clocks 770/4000 (artifacts on 3DMark 11)
I even plan do not OC it and stay on default clocks for now, but today I start bechmarks and notice only in 3DMark 11 artifacts (red sqares/dots) in others benchmarks I don't noticed any, or in games.
I bought it 3 days ago and I thinking to exchange it for another, what are you think is worth ? or could you here help me somehow ? I see is possible to upgrade new updated bios with higher voltage.
Is it 100% safe to flash this in Windows 7 64bit ?
I don't know how to check which voltage is enough for stock clocks ? Is that cards was not tested before they go to market ?
As I know I have to increase the voltage by MSI Afterburner Core Voltage (mV) a little and checking stability/artifacts ?
I checked orginal default voltage VDDC in GPU-Z and is 0,9120V at idle, and 0,9880V at stress.

Quote from: PeterMac on 16-May-11, 21:09:35
I rec video how it's work on default
You think other one should be good ? or maybe all of this cards are not stable on defaults voltage/clocks
Not for all, it should work as is.
Eventually can be fixed with bios update, with voltage bump
So either try bump the voltage until it makes stable then i can make a bios for you,
or rma it

MSI NEW P.E. Series Video Card - GTX670 Power Edition 2GD5/OC with Twin Frozr 4

Glad to be back in the forum and I was been busy for awhile. By this time lots of PC hardware already came out especially from Nvidia. Just like today my share would be MSI's N670GTX PE 2GD5/OC video card.
First of all lets talk about the GTX670 GPU chip. This GPU is the younger sibling of GTX680 which uses the same 28nm GK104 chip but with one disabled shader cluster/core.The reference or standard GPU clock is 915Mhz with a turbo boost of 980 and as for the memory is concerned, it has a 256bit memory bus connected to a 2GB GDDR5 memory with speed of 6008Mhz. Just like with any Kepler based architecture, the card would also have all the goodies like "Adaptive V-Sync", "AA TXAA (Temporal Super Sampling)", supports "DX11.1" and improved 3D Vision Surround.
Moving on, let's check out now what MSI did with their GTX670 SKU based video card. The card is under a new Series named "Power Edition" (series comparison table below) and it comes factory overclocked from GPU clock of 915MHz to 1020MHz and Turbo boost of 980Mhz to 1080Mhz. It also comes with the 4th version of Twin Frozr Thermal Cooling design with a theme color of Black and Blue which matches the color of MSI's midrange to high-end motherboards as well. The dual 8cm PWM fan based cooler are equipped with Propeller Fan Blades which draws air better and now has the so called "Dust Removal Technology", basically as you startup your PC the fan will rotate counter clockwise for 30 seconds clearing the dust from the cooling heatsink. Adding a finishing touch, MSI equipped the video card with their Military Class III components ensuring the best performance, efficiency, higher overclocks and durability.
Additional Box Shots of the N670GTX PE OC
MSI Series Comparison Table
New Power Edition Series which is a notch higher than the basic Twin Frozr Series.
Below are some other basic specs of the card which not been mentioned above.
•CUDA Cores: 1344 Units
•Output: DisplayPort / HDMI / DL-DVI-I / DL-DVI-D
•Total Draw Power: 200W
•Card Dimension: 267x117x38mm
•DirectX: DX 11.1
•OpenGL: 4.2
•PCI Express: 3.0
•SLI: 3-Way Capable
•3D Vision Surround: 3 Output per Single Card
•Pure Video HD: Y
•HDCP: Y
•Minimum Power Requirement: 550W with 38A for the +12V Rail
Actual shot of the Rear Ports
The card is powered up by additional 2x 6Pin power connectors.
Five 8mm thick heatpipes design
In the future, there might be a GTX670 4GB GDDR5 version as you can see the empty spaces between the GPU memory chips
Bundled Accessories included in the package
•1x DVI to VGA Dongle
•2x 4 Pins Molex to 6 Pins VGA Power
•DVD Driver/Utility Disc
•Manual and Quick Guide
Test Sytem and Configuration
Processor: Intel i7 3770K @ Stock Speed / 4.8GHz / 4.849GHz
Cooler: Thermaltake Advanced Frio
Memory: 2x4GB Kingston HyperX DDR3 2133Mhz
SSD: Kingston HyperX 3K SSD 90GB
Motherboard: Z77A-GD80
Videocard: N670GTX Power Edition 2GB OC
PSU: Antec TPQ 1200
Softwares: Windows 7 64bit Ultimate, MSI Afterburner 2.2.2, Nvidia Forceware 304.48, GPU-Z 0.6.2, CPU-Z 1.60.1.x64, Futurmark Benchmark Softwares, HwBot Heaven DX11
Okey let the benchies begin 1st set of benchies @ stock settings
3dMark06 - 28799
Vantage - P31817
3dMark11 - P9530
Heaven DX11 - 1956.985
2nd Set - Processor @ 4.8GHz while the video card is still running at stock speed
3dMark06 - 35852 From the previous score of 28K it jumped to 35K. This is becuase 3dMark06, relies heavily on the clock frequency of the processor.
Vantage - P34377
3dMark11 - P9861
Heaven DX11 - 1986.539
3rd Set - i7 3770K @ 4.849GHz and the video card GPU clock @ 1070mhz with turbo boost at 1148Mhz and memory clock speed @ 1717MHz (6868Mhz effective rate)
3dmark06 - 36402
Vantage - P36194
3dMark11 - P10263
Heaven DX11 - 2140.223
That's it. I will share another hardware soon

@Bernhard
The card is not with me already :( it was just left for few days. Don't worry next time I will make some tests using Virtu MVP.
@Update
Afterburner 2.2.3 is already out and with this new version. You can overclock the PE better

MOVED: Display driver stopped responding and has recovered. MSI GTX 670 Power Edition

This topic has been moved to Graphics Cards.
https://forum-en.msi.com/index.php?topic=251843.0

Hey there,
Noticed that my BIOS drivers were outdated so i updated them (Z68A-GD65 G3, version: 25.8), after all the reboots i logged on my computer, started teamspeak, and while searching for the teamspeak room the driver problem happened again.
Anyway, my power supply is NOX Hummer 80 600W, model: HUM80600.
The problems started on September of this year i think? I've had this computer for almost 3 years now. I have the latest Nvidia drivers, and this still happens, i've tried downgrading, fresh installing, and nothing worked.
Graphics card: MSI GTX 670 Power Edition 2GB GDDR5 PCI-E 3.0 DirectX11, S/N: 602-V284-02SB1207063830.
I'll try it tommorow if possible.
Thank you for the attention.

MSI GTX570 POWER EDITION helppp

Similar Messages

Maybe you are looking for