MSI GTX770 OC Edition not recognized by PC

Hello, I recently build my pc, and found out that my pc doesn't recognize my graphics card (MSI GTX 770 2GB OC). I can't install drivers, since it doesn't recognize it. At first everything didn't work, but I changed pci slot and the fans started turning. Is my gpu DOA or did I do something wrong? The oddest thing happens. When I remove the GPU, I can start up perfectly thanks to Intel Integrated Graphics, however, when I put it in Pci slot 1, the screen is black. When I put it in pci slot 2, it starts up fine

Quote from: flobelix on 15-December-13, 05:01:58
Disable Win8 feature in bios. Also make sure the tool successfully prepared the stick before rebooting. If no go use the forum tools option to fix the usb stick and restart preparing the bios file with the tool.
So I succesfully flashed, but my gpu is still not recognized by my pc. I tried installing the drivers and it still didn't work
What now?

Similar Messages

MSI GTX980 Gaming sometimes not recognized by MSI Z97 Gaming 9 AC

I have been experiencing a very odd problem with my new hardware.
Hardware
Motherboard: MSI Z97 Gaming 9 AC
CPU: Intel Core i7-4790
CPU-cooler: Scythe Mugen 4
RAM: G.Skill RipjawsZ F3-17000CL9Q-16GBZH
Videocard: MSI GeForce GTX 980 4GB GAMING 4G
PSU: Seasonic X-660 80+ Gold
SSD: Crucial M550 2,5" 1TB
Monitor#1: LG 34UM95-P
Monitor #2: Eizo Foris FG2421
OS: Windows 7 Professional
Issue description
The thing is that with 2 monitors connected the videocard is not recognized on a cold boot, but boots perfectly most of the time after a restart. In some cases a restart doesn't do the trick. I have even seen a couple of times that the monitor shows that windows starts and then the monitor loses the signal from the videocard before I can see the desktop (rare). With just 1 monitor attached the videocard is recognized. Als the IGP works fine, it's just the videocard that doesn't seem to be recognized when 2 monitors are connected (all combinations of DP, HDMI and DVI). When the computer has booted after one or more restarts and the videocard is recognized the computer works flawlessly, no problems whatever I do with it (desktop work, stressing hardware, playing games, etc.). Not a single sign of instability.
It's just the cold boot and sometimes the soft boot or restart that causes the videocard to not being recognized with 2 monitors connected.
What makes it really weird to me is that when the computer goes into sleep mode I can wake it up normally within say 10 minutes. But if I wait for let's say an hour the videocard is not transmitting a signal through the videocard.
When IGP is enabled the computer boots and windows loads normally (I hear the sound of the Windows login), although the monitors stay black when connected to the videocard. Then switching the connectors from the videocard to the motherboard shows me a normal Windows login screen, but the videocard is not visible in the device list. When the IGP is disabled to bootup sequence just hangs until a restart works and the computer boots normally with the videocard getting recognized and working properly.
Click sounds
I noticed the motherboard makes 4 click sounds when booting, like relays flipping. I think it has to to with distributing power to al the components, since it looks like components respond to the click by turning led lights on. But I have to say I've never come across a motherboard before that makes click sounds. Is this normal?
Tried fixes
- Replaced the RAM with 100% working RAM from my other computer (Corsair Vengeance LP CML8GX3M2A1600C9) -> problem persists
- Disabed XMP -> problem persists
- Replaced the PSU with another one (Cooler Master V550 Semi-Modular) -> problem persists
- Reinstalled the videocard physically -> problem persists
- Tried several combinations of connecting the 2 monitors to the videocard (all DP ports, HDMI and DVI) -> problem persists
- Replaced the videocard with a MSI GTX970 Gaming (connected with 1xDP and 1xHDMI) -> problem persists
Conclusions so far
The cause can be found in the videocard or motherboard (probably BIOS issue).
Who can shed some light on this issue?

Quote from: JLio01 on 14-November-14, 17:02:39
Try all PCIE slots no luck? Does the black screen always happen on one certain monitor or both?
I tried both the first and the second PCIe slot. No difference except for the fact that in the second slot the card only works at x8 bandwidth.
Quote from: jotan.va on 24-November-14, 18:05:51
BTW - Did anybody try to remove the wifi module from the board and then test?
I didn't install the wifi module in the first place.
UPDATE
I returned the motherboard to the webshop I bought it from and sent my cpu, ram, psu and videocard (GTX980) with it so they could test it. They found out that the videocard is the problem. So now I have to send the videocard to the webshop it bought that from. However, I am suspecting that it's just a VBIOS problem and not some fault in the hardware itself. On the other hand, it would be very strange that MSI would release a videocard that cannot work with one of their own top motherboards, wouldn't it?

MSI 785gtm-e45 usb not recognizing

HI all. i just built this pc yesterday using this mobo MSI 785gtm-e45 with AMD phenom X4 2.5ghz along side with 2ghz of ram ddr2 800mhz and installed windows 7 ultimate 32bit . everything went well thru the installation of the os, cept when i went to plug in my jump drive the lower right hand box said /!\ usb is not recognized. im using a ps/2 mouse and keyboard it connects thru the internet, i even downloaded drivers from the website and installed and still im getting that warning. any idea of wut could be the culprit

Quote from: Svet on 26-July-10, 07:10:13
>>If you are having problems with USB ports, read this topic.<<
I am having the same problems, but this is also affecting my onboard USB connections. I have disconnected the panel USB connections (they only had 8 wires anyway, so no need for the posted reply in that thread) from the mobo. I cannot even get the mobo to recognize a USB mouse plugged into a PS/2 adapter.

Site edit not recognizing index.htm file

Going through the Site/Edit function to change server
information, DW told me it can't find the index.htm file. Waiting
on more information from the host - beside the new IP address, the
password has been changed and the upload path.
While I'm waiting on that info want to make sure there's not
something on my end that could be wrong. The file is in the root
directory, the name has not changed, and the default file extension
is set to .htm. Is there something I could have done to cause this?
The site's been up for years, and I last changed it successfully
last month or the month before.

> it can't find the index.htm file
No, it's telling you that you haven't told it which file is
your home page.
Find it, right click, and choose "Set as Home Page". Bada
bing, bada boom.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"oreillers" <[email protected]> wrote in
message
news:gqoi3c$pbj$[email protected]..
> Going through the Site/Edit function to change server
information, DW told
> me
> it can't find the index.htm file. Waiting on more
information from the
> host -
> beside the new IP address, the password has been changed
and the upload
> path.
>
> While I'm waiting on that info want to make sure there's
not something on
> my
> end that could be wrong. The file is in the root
directory, the name has
> not
> changed, and the default file extension is set to .htm.
Is there
> something I
> could have done to cause this? The site's been up for
years, and I last
> changed it successfully last month or the month before.
>

Xmp edits not recognized after clicking "done" in ACR or Bridge

.cr2 files... i open them in either Bridge or Photoshop to the ACR panel, make changes, click DONE. when i reopen them to, say, make futher changes or process a whole bunch of files, all settings are back to default, all adjustments forgotten. this seems to happen often, but NOT always. weird.
using MAC 10.6.8 photoshop CS6 with latest updates installed.... this has happened for awhile, though... cannot find a suitable answer on the forum. JEFF SCHEWE? OBIWAN KANOBI? anyone? this is FRUSTRATING

There have been a few users that have exactly your problem, raw edits do not take, on some, but not all images. In those cases it turned out the camera clock setting was an hour or two ahead of time so the program would not make in changes. Computer figured the pictures had not been taken yet and you can not edit for future possibilities I guess.
Anyways syncing the camera to correct time worked so edits would be executed.

MSI Radeon R9 290 not recognized

Hello people,
I hope this is the right place to post this. Yesterday I bought components to build a new computer.
- msi radeon R9 290 Gaming 4GB
- 8 gb crucial ram
- 240 gb crucial SSD
- i5 4440 processor
- MSI B85M-E33
- Cooler Master GM-Series G550M
- Cooler Master N200
I can't install catalyst center, I can't recognize the card in windows devide manager. Even in the BIOS its says that the PCIE1 express lane is empty.
So I think that my motherboard is not compatible with the R9 290? Is there anything I can do? Or do I have to buy a new motherboard?( fans of the graphicscard are running)
Please help me:)
Thanks!

There is no reason why the vga shouldn't work with your board although it is not meabt for gaming. Try updating it to the latest bios version using integrated gpu.
To update use the attached (!) bios archive and the >>Use the MSI HQ Forum USB flasher<<
With the >>Use the MSI HQ Forum USB flasher<< point to the attached and NOT unpacked bios archive (Mode 1: Point to Archive).
Let the tool prepare an USB stick for flashing and reboot from the stick. Like before after post switch to bad bios and let the tool update bios. It will flash to the version 3.5.

Re: MSI Gaming 5 Z97 not recognizing keyboard and boot devices.

Jaspericus, open your own thread for your issue please. Don't resurrect or hijack other's. >>Please read and comply with the Forum Rules.<<

We don't assist with OEM hardware but MSI retail hardware only. >>Please read and comply with the Forum Rules.<< Contact HP about it.

MSI Z87-GD65 USB Razer Megalodon not recognized by windows!?

Hi guys, I recently just upgraded my PC and everything is okay except my USB Headphones are not recognized on this system oO I had to reinstall windows to get the motherboard to be compatible with my setup and after updating windows and looking up the problem, I haven't found an answer.
The Headphones work 100% sure because they worked on my old mobo and my laptop that is right next to me.
Says its an unknown device and has a ? next to it. Also these headphones use the Windows USB Generic Audio Driver but for some reason its not working.
Any help would be appreciated alot

Try the latest Bios: >>Beta BIOSes<<
I will check for a newer version as well right now.
Edit: .141 is the latest.
Might want to check for a firmware update for the usb device as well.
Edit#2: Install the ram properly and see if that changes anything. Locking this topic as it is a duplicate.

MSI UBO-30 External Slim Bluray Drive not recognized under Windows 8.1

Hi, does anyone here have MSI UBO-30? It is an external bluray drive from MSI. For some reason the drive is not recognized under windows 8.1 64 bit (it just says USB device not recognized). But works fine if plugged into Windows 7 machine. Anyone encounter the same issue?

Try upgrading your usb 3.0 drivers on your system. That worked with My GS70 Stealth Pro...

I have updated my adobe digital editions but application not recognizing it, can't open epub book

I have updated my adobe digital editions but application not recognizing it, can't open epub book

What Adobe Digital app on your iPad? If you are talking about a third-party app (like Bluefire Reader) you need to connect your iPad to your computer, open iTunes, select the iPad, and select Apps in the Sidebar. Scroll down to the File Sharing section, select the app you plan on using, select Add (bottom right), navigate to where the book is on your computer, select the book and sync your iPad.

Msi K8t NeoFSR - HD/DVD/CDRW not recognized

hi friends,
I am not a computer genious...Just was excited to try build my own system....So but now facing a hard time....I have read almost every page of my manual...My hard drive manual..But was not able to fix the problem...
#I constantly keep on getting the following error:
PXE-E61 Media test failure, check cable
#and also i am surprised whehter my CD-ROM/DVD ROM DRIVES Should show LED even if not recognized...But none of my Optical drives glow LED.
D Bracket 2 - all lights green
NOW FOR THIS PROBLEMS I TRIED ALL OF THE FOLLOWING..
1)After reading some posts over this forum i did some of the bios changes
#BOOT ORDER (Shif + F10):I had following options of booting
(1)ROM DIABLE (2)INT 18h (3) Int 19h (4) Pnp/BEV (BBS).
I tried to boot with all above options...but none was working to find my hard drive..
#I went into BIOS ..Set settings to DEFAULT and then did following changes into Integrated Peripherals
VT8237 PATA contoller -enabled
VT8237 SATA Controller - disabled
IN OnBoard PCI controller
lan CONTROLLER - disabled..
AC'97 AUDIO -enabled
( i did not see p20378 SATA Controller- because probably thats option available on K8T NEO FIS2R and not for my motherboard)
2)Next i followed exactly the screens shown in manual.
http://www.msi.com.tw/program/support/ma...?UID=496&kind=1
But that also did not help
3)I Changed to Seagate 15gb hard drive with windos 98 installed on it and only 1 optical drive..But then also BIOS did not recognized my hard drive
I also checked my 120 gig hard drive in my old system and it was working smooth...no problems at all..
4)I tried clear my BIOS and reset jumpers ....But the same things keep on occuring.
5)I tried the 4 pin from PSU that i used for HD and DVD-ROM...Whether they carry power ? I plugged into front neo light of case...and the 4 pin carries power and front case LED Works with all the pins......
They why my PSU does not start LED of my optical drives ?
So can someone help me to findout whats going on?
Is my motherboard dead...Or i am fool enough not able to fix this...I have been working on this since 2 days...and now completely lost any hope that i will be able to boot my system anytime....
ANY help Please.....Thanks...

Quote
I am not a computer genious
...can't even spell it...
...j/k...
...take a deep breath and exhale slowly...
...your BIOS settings look OK...
...Western Digital HDD...if you have it on IDE1 (good place to have it!) and there is no Slave then remove the jumper from the drive...no jumper...connect the HDD to the black connector of the IDE cable, blue end to mobo IDE1...
...try a single DVD recorder on IDE2, jumpered as Master, the black end connector in the drive and the blue into the mobo IDE2...
...boot order should be temporarily set to 1) CD-ROM (DVD) and 2) the HDD...insert the Windows disk, F10 to Save and Exit and pray...

Memory module not recognized on K7T266 Pro2

Hello.
I have a computer with only 256 Mb of RAM and I wanted to add 256 Mb but my second memory module of 256 Mo is not recognized whereas it functions very wel.
Here are details :
- Mother board : MSI K7T266 Pro2 (ms-6380 v2.0) with 3 memory slots
- BIOS : Award Modular W6380F1 V3.0 071902
- Memory module of origin : Samsung 256 Mo PC2100 (2 Sides)
- New memory module : Corsair Value 256 Mo PC3200 (1 Side)
Configs Tested :
- Samsung only : OK
- Corsair only : OK
- Samsung in Slot 1 and Corsair in Slot 2 or 3 : the computer starts but with only 256 Mb of RAM (in this config, Everest Ultimate Edition finds both memory modules but also only 256 Mb of RAM)
- Corsair in Slot 1 and Samsung in Slot 2 or 3 : the computer starts with a blank screen and several beeps.
Can somebody help me so that my second memory module is recognized correctly ? I specify that I did not modify the BIOS.
I thank you by advance.

I'm no memory expert, but from being around here I've learned that there is more to a stick of RAM than the MHz speed. If timings etc were perfectly the same for the 3200 and the 2100, the system (the Northbridge) could simply set down memory speed to the slowest of the sticks.
However, I also know that many have been helped by entering BIOS, Advanced Chipset..., and go to the subtitle Memory timings controlled by..., and change from By SPD to By User. Then manually set down to 133 (266 effectively). This is if you absolutely want these two sticks.

Nano 3rd generation recently purchased is not recognized by iTune Account

I recently purchased a Nano 3rd generation that has no songs or any other type of media on it. It does have a device name "user1". I need to change the device name to match my current iTunes account so that it can be synced with iTunes. I ran the diagnostics but while iTunes seemed to find the device, the sync test would fail. See below. I am trying to find out how to correct this problem so the device can be loaded with the current library.
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Acer, inc. Aspire 6530
iTunes 11.0.1.12
QuickTime 7.7.3
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver 1.63.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.xxx
Gracenote MusicID 1.9.6.xxx
Gracenote Submit 1.9.6.xxx
Gracenote DSP 1.9.6.xx
iTunes Serial Number 002xxxxxx32D02xx
Current user is not an administrator.
The current local date and time is 2013-01-23 09:39:04.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Advanced Micro Devices, Inc., ATI Radeon HD 3200 Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 11.0.1.12 is currently running.
iTunesHelper 11.0.1.12 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Standard Enhanced PCI to USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
USER1'S IPO (F:\), iPod nano (3rd Generation) running firmware version 1.1.3
Serial Number: 5U7405V7YXT
Bus Speed: 61440
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

Start by working through all of the troubleshooting suggestions here.
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

I need help, my ipod touch is not recognized by windows as a harddisk

i need help, my ipod touch is not recognized by windows like a memory card or a harddisk.
i would like to transfer the files from pc to my ipod touch without useing itunes.
as i see theres some people here that theires ipod touch are recongnzed as a digitl camra, mine is reconzied as nothing, some help plz.
Message was edited by: B0Om

B0Om wrote:
ok but i still dont understed, only my itnes recongnize my ipod, when i go to " my cumputer, it dosent show up there, not even as a digital camra
Your Touch is working correctly. Currently, without unsupported third party hacks, the Touch has NO disc mode. It will only show up in iTunes.
how do i put programes and games in my ipod touch
Right now, you don't. The SDK is scheduled to be released in Feburary. Then developers will be able to write programs that will be loadable.

Ipod not recognized by computer or itunes when not in disk mode

My ipod nano 6th gen. recently has stopped working. I am able to charge it for a short amount of time but have to reset the ipod everytime I go to turn it on. I wanted to update the software but when I plug it into my comp that I have previously updated this ipod on, it says that the device is not recognized. I followed steps on the support page and discovered that the ipod is recognized as a device and as a ipod in disk mode but when I reset the ipod back to normal mode it is once again not recognized. I don't have a problem with my comp or itunes when I connect my iphone or ipod touch so I'm trying to figure out how to get the ipod to work. any suggestions.

I have kind of the same problem with my 60gb ipod with colour display.
everything was working fine up until last sunday when i plugged into my laptop and I got the 'folder with exclamation mark' icon
i reset it and put it into disk mode but when i connect it to my laptop it doesnt turn up on itunes or windows. occasionally it will appear then disappear again so i can't restore it to factory settings.
i did manage to get it to appear in itunes and click on the restore button but i got the message that it couldnt be restored and there was a problem with the 'firmware' but before i could try anything else it disappeard from itunes again.
i have been told that the problem may be with my USB cable so i will buy another one at the weekend but if that doesnt work does anyone else have any ideas as i have tried nearly everything.
i personally think my ipod caught me looking at my friends new 80gb video ipod and got jealous!!!!!
Message was edited by: princesspurplehippy

MSI GTX770 OC Edition not recognized by PC

Similar Messages

Maybe you are looking for