Msi GTX970 gaming 4g

Hye guys.. want to ask is it ok that my gpu temp is at 79 degree when i play gamess

owentsai - sorry, I disagree - 79 is WAY too high for this particular card. Unless he has poory ventilated or fully enclosed case, there is no way 4G should reach 79 with TF5. My 980 reaches 68 deg on OC with case fans off so mnct327 - no, this temp is not normal.
can you check in afterburner if your fans are spinning and what speed? do you have them on AUTO or manual?

Similar Messages

  • MSI GTX970 Gaming 4G issue

    hi guys, was after a bit of help/advice.
     I swapped out my gigabyte GTX770 4gb O/C card for a new MSI GTX970 Gaming 4G card yesterday.
     At the same time I decided to do a clean installation of drivers and update to new 344.48 drivers.
     I uninstalled the 344.16 drivers and used driver sweeper as normal to clear out old NVidia files.
     I then tried to install the new 344.48 WHQL drivers from the nvidia site and I got a security warning stating the driver install could not proceed as the driver wasn't digitally signed
     I downloaded a new version of 344.48 from the nvidia website and this time the driver installed.
     However, when I tried to play the a game of BF4 or borderlands, I get an APP Crash error and the game freezes.
     I have just done a clean installation of windows in case I had corrupt anything during card swap over, and once again downloaded a fresh version of 344.48 WHQL and once again its telling me the driver is not digitally signed and I cant proceed with installation.
     I have managed to get the older 344.16 driver installed at the moment, but I haven't a clue what is causing this. I have yet to test the games after the clean windows install, but I have feeling they are going to crash again.
     I hope I don't have to RMA this card ;/
     My build: -
     Intel i5-4670k (stock speed)
     Corsair H80 water cooler
     Gigabyte Z87x-UD3H m/b running bios update F8
     XFX 850w black edition modular PSU
     16gb DDR3 1666 corsair vengeance
     MSI GTX970 Gaming 4G GPU
     Asus VG248QE 144hz monitor with custom gaming ICC profile
     Win 7 64 bit (all updates)
     cheers for any help guys

    Quote from: matt3o on 26-October-14, 17:56:53
    I'd try to update the motherboard bios as well. http://www.gigabyte.com/products/product-page.aspx?pid=4481#bios
    cheers guys, I just flashed to latest F10b bios and changed pci-e slot from gen3 to auto in bios, running borderlands now for last 30mins in OC mode on card and no crashes or app hangs
    fingers crossed, this has resolved the crash issues.....still doesn't explain why the latest Nvidia drivers are saying I cant install due to no digital signature.
    I will try to update to latest 344.48 later and see what happens, don't want to mess too much at the moment as I've only just got this card stable....fingers crossed ;p
    thanks for your help guys

  • MSI GTX970 Gaming 4g Win 8.1& Win 10 x64 error code 43

    Good day. I`ve changed my gtx 770 OC from gigabyte to msi 970 gaming 4g. After windows loaded i have exclamation on gtx 970 in device manager - error code 43. Tried clean install new drivers with DDU. Tried all driver from 344.11 to 344.80. Updated bios for my mobo and video. Reinstalled win 8.1 x64  and win 10 tp - same error :( I was thinking that my card is dead and tried to install win 7 x64. And it works perfectly in win 7, no errors.
    Any thoughts how i can make it work in win 8.1 ? (tried to turn of gen3, standby and etc in bios. Hypervisor is not active in win 8.1 too)
    My Pc:
    cpu i4670k
    mobo z87p-d3 (f8 bios)
    ram 2x4gb kingston
    video msi gtx970 gaming 4g ( latest bios)
    psu zalman zm600-gsII
    1 ssd and 3 hdd

    sounds like there is some kind of compatibility issue
    have you tried MSI VGA drivers from smi web for your card?
    else ask your mainboard vendor for bios update
    other options/tips:
    * tell S/N of your card and save and upload its current vbios to check for updates
    * test the card in another computer with Win8.1 OS to verify if will works there

  • MSI GTX970 GAMING 4G - Electric noise when mid-full load

    Two days ago i bouhgt gtx970 and now im testing that always appears an insupportable noise form GTX that gets inside my brain. For example, while im playing bf4 and shut down speakers noise can be heard in all house. IT is an electric noise, like a FSSSSSSSSS that always increase or decrease with grafics movements.
    I dont updated GTX Bios. I have been reading and this issue is called "COIL WHINE", have any sholution o i have to do RMA. Of course im not going to waste 360€ for a noise gcard.
    MB is Z77A-G43 (MS-7758)
    MB Bios is 2.D0
    Gcard Bios version is NV316MH.126
    PD: sorry for my english

    I have to tell that i have download CPUZ and in nvidia panel pcie is set up to 2.0 instead 3.0. I check it runing GPU test in windows to mid/full load 970.
    In Bios pcie is set as "AUTO" newgen 3.0
    Operating system64-bit Windows 8.1 (6.3.9600)
    Motherboard MSI Z77A-G43 (MS-7758) - with bios 2.D0 (lastest)
    Processor Intel Core i5-2500 Processor 3,3Ghz
    MSI GtX970 with Bios NV316MH.182 - Driver version9.18.13.4475
    Memory 8192 MB
    Module 1 - 4.096 MB Kingston DDR3 @ 667 MHz
    Module 2 - 4.096 MB Kingston DDR3 @ 667 MHz
    Hard drive model 160 GB INTEL SSDSA2BW160G3H
    2nd HDD - 500GB no SSD
    PSU: APP650PS
       AC INPUT: 115/230w 16/6A 47-63hz
       DC OUTPUT +3.3V(24A) +5V(20A) // +12V (30A) +12 (22A) // -12V (0.3A) // 5V(3A) // BLK (COM) //GRN (PSON) //GRY (PWOK)
       POWER:            130wMAX          // 560 W MAX               // 3.6W          // 15w     // RETURN     // REMOTE     // PG
       MAX POWER 650W
    Here you got all information you asked

  • MOVED: [REQUESTS] Vbios - MSI GTX970 Gaming 4G

    This topic has been moved to GAMING Graphics Cards.
    https://forum-en.msi.com/index.php?topic=250983.0

    Quote from: Svet on 30-November-14, 20:27:59
    here is latest vbios for your card
    Hi Svet
    Im currently using the previous bios version and want to update to the latest for my 2x GTX 970.
    Can i use the one you attached? 
    The reason im asking is because there are many that say each MSI GTX 970 have an unique bios between 5 different(?). For getting correct bios version you have to look at the cards serialnumber

  • [REQUESTS] Vbios - MSI GTX970 Gaming 4G

    Hello. I'd like to request for a Vbios update for my GTX 970 Gaming 4G, I'm having issue with monitor blacking out
    and freezing the system.
    S/N 602-V316-09SB1410114937-7OL
    I'd post my current Vbios, but I can't seem to find where to add attachment.
    Edit: Nevermind, here it is
    "htts://www.sendspace.com/file/gwapxg"
     

    Quote from: Svet on 30-November-14, 20:27:59
    here is latest vbios for your card
    Hi Svet
    Im currently using the previous bios version and want to update to the latest for my 2x GTX 970.
    Can i use the one you attached? 
    The reason im asking is because there are many that say each MSI GTX 970 have an unique bios between 5 different(?). For getting correct bios version you have to look at the cards serialnumber

  • MOVED: Msi GTX970 gaming 4g

    This topic has been moved to GAMING Graphics Cards.
    https://forum-en.msi.com/index.php?topic=250580.0

    Quote from: matt3o on 26-October-14, 17:56:53
    I'd try to update the motherboard bios as well. http://www.gigabyte.com/products/product-page.aspx?pid=4481#bios
    cheers guys, I just flashed to latest F10b bios and changed pci-e slot from gen3 to auto in bios, running borderlands now for last 30mins in OC mode on card and no crashes or app hangs
    fingers crossed, this has resolved the crash issues.....still doesn't explain why the latest Nvidia drivers are saying I cant install due to no digital signature.
    I will try to update to latest 344.48 later and see what happens, don't want to mess too much at the moment as I've only just got this card stable....fingers crossed ;p
    thanks for your help guys

  • MSI GTX970 Gaming 4G VBIOS Request

    Is there a newer VBIOS for my card?
    Serial number: 602-V316-03SB1409038171
    I have attached the current BIOS. GM204.zip (136.14 kB - downloaded 8 times.)

    Yes, update is available:
    NV316MH.125 ==> NV316MH.186:
    https://forum-en.msi.com/index.php?topic=252890.msg1453625#msg1453625

  • Msi gtx970 gaming new vbios NV316MH.126

    Today, live update program  tell me that there is a vbios update...my installed version is NV316MH.125
    Do i really need this update?
    What are the changelog...

    A number column like "84.04.1F.00.F1" is no real vbios version despite gpu-z's wrong listing. These numbers can cover various versions even legacy and UEFI/GOP. Only the MSI version is relevant.
    Quote from: comiandrea on 08-October-14, 19:33:15
    i'll wait for more info about this vbios...
    MSI doesn't document changes in vbios versions so nobody except for an MSI bios engineer can tell you. If not especially released for a certain purpose (e.g. to fix a common issue) most users won't even notice any difference. If you want to ask MSI do so: >>How to contact MSI.<<

  • MSI GTX970 Gaming 4G Temps

    Hi,
    I recently received a new graphics card from RMA.
    ono thing that i've noticed is that my old card would idle at around 32ºc and the new one at almost 50ºc.
    is this normal? should i be concerned?
    thanks

    during games like crysis 3 the highest temp i remember to see is 62ºc. never done any stress test with a specific program
    i know that's not much, since the fans only start to work at 60ºc, but i don't know if it's normal for 2 versions of the same card to idle at such different temps

  • MSI GTX980 Gaming sometimes not recognized by MSI Z97 Gaming 9 AC

    I have been experiencing a very odd problem with my new hardware.
    Hardware
    Motherboard: MSI Z97 Gaming 9 AC
    CPU: Intel Core i7-4790
    CPU-cooler: Scythe Mugen 4
    RAM: G.Skill RipjawsZ F3-17000CL9Q-16GBZH
    Videocard: MSI GeForce GTX 980 4GB GAMING 4G
    PSU: Seasonic X-660 80+ Gold
    SSD: Crucial M550 2,5" 1TB
    Monitor#1: LG 34UM95-P
    Monitor #2: Eizo Foris FG2421
    OS: Windows 7 Professional
    Issue description
    The thing is that with 2 monitors connected the videocard is not recognized on a cold boot, but boots perfectly most of the time after a restart. In some cases a restart doesn't do the trick. I have even seen a couple of times that the monitor shows that windows starts and then the monitor loses the signal from the videocard before I can see the desktop (rare). With just 1 monitor attached the videocard is recognized. Als the IGP works fine, it's just the videocard that doesn't seem to be recognized when 2 monitors are connected (all combinations of DP, HDMI and DVI). When the computer has booted after one or more restarts and the videocard is recognized the computer works flawlessly, no problems whatever I do with it (desktop work, stressing hardware, playing games, etc.). Not a single sign of instability.
    It's just the cold boot and sometimes the soft boot or restart that causes the videocard to not being recognized with 2 monitors connected.
    What makes it really weird to me is that when the computer goes into sleep mode I can wake it up normally within say 10 minutes. But if I wait for let's say an hour the videocard is not transmitting a signal through the videocard.
    When IGP is enabled the computer boots and windows loads normally (I hear the sound of the Windows login), although the monitors stay black when connected to the videocard. Then switching the connectors from the videocard to the motherboard shows me a normal Windows login screen, but the videocard is not visible in the device list. When the IGP is disabled to bootup sequence just hangs until a restart works and the computer boots normally with the videocard getting recognized and working properly.
    Click sounds
    I noticed the motherboard makes 4 click sounds when booting, like relays flipping. I think it has to to with distributing power to al the components, since it looks like components respond to the click by turning led lights on. But I have to say I've never come across a motherboard before that makes click sounds. Is this normal?
    Tried fixes
    - Replaced the RAM with 100% working RAM from my other computer (Corsair Vengeance LP CML8GX3M2A1600C9) -> problem persists
    - Disabed XMP -> problem persists
    - Replaced the PSU with another one (Cooler Master V550 Semi-Modular) -> problem persists
    - Reinstalled the videocard physically -> problem persists
    - Tried several combinations of connecting the 2 monitors to the videocard (all DP ports, HDMI and DVI) -> problem persists
    - Replaced the videocard with a MSI GTX970 Gaming (connected with 1xDP and 1xHDMI) -> problem persists
    Conclusions so far
    The cause can be found in the videocard or motherboard (probably BIOS issue).
    Who can shed some light on this issue?

    Quote from: JLio01 on 14-November-14, 17:02:39
    Try all PCIE slots no luck? Does the black screen always happen on one certain monitor or both?
    I tried both the first and the second PCIe slot. No difference except for the fact that in the second slot the card only works at x8 bandwidth.
    Quote from: jotan.va on 24-November-14, 18:05:51
    BTW - Did anybody try to remove the wifi module from the board and then test?
    I didn't install the wifi module in the first place.
    UPDATE
    I returned the motherboard to the webshop I bought it from and sent my cpu, ram, psu and videocard (GTX980) with it so they could test it. They found out that the videocard is the problem. So now I have to send the videocard to the webshop it bought that from. However, I am suspecting that it's just a VBIOS problem and not some fault in the hardware itself. On the other hand, it would be very strange that MSI would release a videocard that cannot work with one of their own top motherboards, wouldn't it?

  • MSI X99S Gaming 7 and debug code 67

    Hi,
    I have MSI X99S Gaming 7 motherboard, Crucial 2x8GB 2133 DDR4, MSI GTX970 Gaming 4G, Corsair RM650, i7-5820k setup.
    When I am trying to boot the machine it always stops and the debug led shows code 67. I have tried to take everything out, reseated processor and to boot with just the minimum set of components. Result is always the same code 67.
    I am running out of ideas. Do you have any hints or should I just return the mobo and processor?
    Best Regards,
    juha

    Quote from: shadow85 on 22-December-14, 19:40:31
    So are you going to RMA the board or just use it with 2 sticks? Thats means you are not planning on using it in quad channel, would be a waste.
    Anyways if I were you I would definatly RMA it asap. This error 67 problem people are having seems to be widespread.  MSI really need to look into this.
    As has been said previously, contact MSI. Should they look into it? Yes, but the moderators here are not MSI employees, and while we can bring issues to their attention, we cannot make them look into problems.
    So if you have this problem, please contact MSI directly:  >>How to contact MSI.<<

  • MSI GTX970 - many games don't start "game.exe has stopped working"

    Hey guys,
    I have a problem with my new MSI GTX970. I have several games that just won't work.
    Working games:
    Witcher 2
    Guild Wars 2
    Project CARS in DX9 Mode
    Not working games:
    Project CARS in DX11 Mode
    Battlefield 4
    Assetto Corsa
    Thief
    Even dxdiag "stopped working" when testing the Direct3D Stuff
    Most likely I think this is some driver issue but I have no idea how to resolve it? My "old" R9 290X was running without any problems. I did 2 clean installs of Windows 8.1 but it didn't help.
    I'm running the latest nvidia driver of course but I'm a bit lost now - do you have any idea what the problem could be?
    Thanks
    Dan

    Hey,
    Sorry - did not read that before :-/
    This is my system:
    Main Board: Gigabyte GA-Z97M-D3H
    Bios Version: F5
    Video Card: MSI GeForce GTX 970 Gaming 4G
    PSU:  be quiet! Straight Power E9-CM
    12v rail Rating of listed PSU: V1 18A V2 18A V3 20A V4 20A
    CPU: Intel Xeon E3-1231
    Memory: 4x8GB Crucial DIMM DDR3
    SSD/ HDD: Samsung 840 Evo 500GB
    CPU COOLER: Mugen 2 Rev B
    Sound Card: Focusrite Scarlett 8i6
    Any Additional hardware plugged into your system: Nope
    OC: (Yes / No) No
    Operating System: Win 8.1 64 Bit running the latest updates via MS Update
    I also tested the card in my GFs system which has the same issues - it's nearly the same spec though, except that it has a Z87-GD65 Mainboard and only 16GB of RAM.

  • GTX970 Gaming 4G and Kraken G10

    Has anyone successfully connected an NZXT Kraken G10 to a GTX970 Gaming 4G ?
    NZXT says their Kraken G10 won't fit on a GTX970 Gaming 4G since it's a non-reference design.

    It seems not compatible, because the VRMs are on the left side.
    I've seen others discuss this on overclock.net forum
    http://www.overclock.net/t/1523813/msi-gtx-970-twin-frozr-with-nzxt-g10-cooling
    But I think you should be able to install Kraken G10 like this (watercool one the left side and fan on right side)
    you just have to add another fan for the left side VRMs.

  • Msi 290x gaming - black screen crash

    Hi
    Recently i bought MSi 290x gaming . After a day i has got first black screen freeze. Only way to turn on computer was unplug it and connect again after 10-20 sec. I try to use different drivers but nothing helped. Sometimes pc worked fine for 2-4 days and them 3-5 crashes in hour. It never happened in a game . always in windows . I tried different psu and nothing change .
    I tried msi afterburner , set voltage to constant. change gpu memory clock ..... but nothing changed :(
    I make decision to RMA card to the shop but they just send me msg that everything was fine :( any ide what i should do ?
    AMD fx-8350
    Asus formula z
    XFX Black Edition 850W Fully Modular 80+ Gold Power
    2x 8GB 1866MHz DDR3 CL10 DIMM HyperX Fury Black Series
    Now im running my old gtx 460 and everything looks fine :((
    Any advice?
    I should maybe try to sell card and buy something else like gtx970 but i just spend 270 pounds and im at least not happy .... huge disappointment

    Not much to try then. Make sure bios of your board is latest and check general system stability with prime95: http://www.mersenne.org/download/

Maybe you are looking for

  • Icloud is no longer syncing to my outlook 2007.

    My iPhone is syncing to iCloud, but iCloud is no longer syncing the contacts and calendar data to Outlook 2007.  I have a PC, Toshiba laptop, running Windows Vista.  It was working up until about 2 weeks ago.  I need my calendar to sync accurate in o

  • CUA roles sometimes do not match the target system

    Hi, We are using CUA on Solution manager to assign roles to our different systems.  Every now and then what is in CUA does not match the target System. I know that you can look at the idocs using WE05 and see what the root cause was, fix it and then

  • ITunes Library too big; how do I create an abbreviated 2nd?

    Hello. I've searched the forum but was unable to find the answer to my situation. I have a rather large library of music and find iTunes incapable of keeping it organized. It is stored on an external hard drive. I would like to create a second--techn

  • GL Account : Cannot be posted to cost object, please check your entry

    Dear All, I've problem in general posting or in FBCJ (cash journal) .... When I try to make journal  : Debit Expense  and Credit Cash in F-02 or in FBCJ then I chose Post an error appear " Cannot be posted to cost object, please check your entry " ..

  • Timing appearance of PPT slideshow elements after importing to Captivate

    I know that in Captivate I can import PPT slides along with the animations (bullet points appearing one at a time, etc.), and that if these are timed in PPT, the timing can be preserved on the Captivate timeline after importing... However, do you hav