MSI GX660, help for dissassembly

Hi,
First of all, I'm french, I'll do my best to explain my problem but it's not easy in english.
I have a MSI GX660 (bought it one year ago) and it seems that there is a lot of dust (dont know if it's the good word :o) on the air outlet (?). I saw the dissassembly guide, but I'm REALLY scared to do that.
Could you give me some clues to do it without damaging the PC ?
Is it risky to do that alone ?
Thx a lot, and sorry for my bad english.

Ah sorry, I didn't understood your answer. That was i was thinking about, but i dont want to wait weeks for my computer :/

Similar Messages

Please help for MSI GX660 bad flash

Hello everyone!
I've writed to Online Custumer support on MSI Company, asking for new BIOS version fo my laptop. They send it to me, and i flashed BIOS successsfuly to new version, but i didn't like it becouse a lot of config menus were removed. I asked Tech Support for the original one, i've flashed it the same way, but laptop wont boot on now. Everything start exept of display.
I'm waiting them for answer from 1 week- nothing !! There is not MSI representive company in Bulgaria and i'm stuck :(
Also i want to say a lot things to MSI Customer support !!! For me - THEY bricked my laptop. And i can't understand how htey just stop write to me and leave me with this brick :(
Can anyone help with something ? Blind flash, recovery, other ?? Thanks a lot !

Quote
I didn't asket exactly for 1.0F but in 1st question i told that is my original version.
you should told them which bios version you are looking for,
as stock bios versions varry per models.
Quote
So, you reccomend to swap CPU, Ram , Video card with others to try if it could works?
Yes eventually
Quote
Can anyone give me 1.0F Bios for my GX660 and what is hiw auto recovery name so i can try blind flash/recovery ?
attached it below
but for recovery name is unknown.
you can try names: AMIBOOT.ROM , E16F1IMS.ROM
placed over FAT/FAT32 USB key, and use this procudure: https://forum-en.msi.com/index.php?topic=134435.msg1009999#msg1009999
just use your bios file names.
other option is to desoldier to bios chip, then to repprogram it and resoldier back
[assume your NB has no warranty]

MSI GX660 RAM Problem! Help me please.

Hello dear members!
I'm from Bulgaria (sorry for my English)
I have MSI GX660 from 4 days. Intel i5 480M and 4GB RAM 2x2GB DDR3 1333Mhz.
I see 3 problems in this notebook.
1.I see RAM memory is 2x2 GB DDR3 1333Mhz
Procesor support 1066 Mhz no 1333!
In Windows Experince index i have Procesor 6.9 and RAM - 5.9. No synchronization with Ram and Processor!
This is great problem i think.
2.In SYSTEM i see installed memory RAM 3.92 GB. Where is other RAM?
This is Windows 7 64 bit and must be see all 4GB RAM but here not.
3.LED Diods on touchpad not working.
I hope you will help me with your answer about this problms.
I waiting your answer and thank you so much!

Quote
1.I see RAM memory is 2x2 GB DDR3 1333Mhz
Procesor support 1066 Mhz no 1333!
this is not a problem they will just run at 1066, it makes no sense to buy/fit 1066 when it is the same price as 1333
Quote
In Windows Experince index i have Procesor 6.9 and RAM - 5.9. No synchronization with Ram and Processor!
WEI is pretty useless, the two ratings you refer to are supposed to be seperate.
Quote
3.LED Diods on touchpad not working.
I believe these only come on when you disable the touchpad, try it.

Request for MSI X360(MS-1355) dissassembly guide

Request for MSI X360(MS-1355) dissassembly guide

I need clearer instruction on how to remove the keyboard.
There are 3 clips/locks on the top portion of the keyboard. somehow Prying it with a flat head screw driver does nothing.
Or do you need to unscrew the screws at the botton of the chassis first before trying to remove the keyboard?
How exactly do you pry the said 3 clips/locks at the top of the keyboard?

Request for MSI U180(MS-N082) dissassembly guide

Request for MSI U180(MS-N082) dissassembly guide

I need clearer instruction on how to remove the keyboard.
There are 3 clips/locks on the top portion of the keyboard. somehow Prying it with a flat head screw driver does nothing.
Or do you need to unscrew the screws at the botton of the chassis first before trying to remove the keyboard?
How exactly do you pry the said 3 clips/locks at the top of the keyboard?

Please help me with msi installer file for 11.6.8.* as this is our standard version which we use for all machines in our organization

please help me with msi installer file for 11.6.8.* as this is our standard version which we use for all machines in our organization

arai-c wrote:
I have full version of this software but I am not able to install it silently because it always gives Google toolbar pop up which We dont required
arai-c wrote:
the problem is we dont have msi file for 10.6.*.* and hence I am not able to create package for it
I don't understand; two days ago you wrote that you have it, now you don't...?
If you don't have it, then why not deploy the current version 12.1.3.153 - I don't see the point of installing an old, unsecure software version.

SSD 128GB OCZ Vertax 3 on MSI GX660 it's possible?

Hello
I have a question and i hope you will help me with this.
Can i put in my MSI GX660 chipset Intel PM55 SSD OCZ Vertax 3 Sata III?
Because if i open this SSD 128GB after that i can't return back in the store.
Help me please with your answers.
Thank you so much.

Well i'm ready with SSD Test on my MSI GX660 SSD OCZ Vertex 3 120GB.
SSD working so good and windows index on Hard Drive is 7.6 not 5.9 like with WD 7200 rpm.
Windows load only for 8 sec Fast yes?! :D
I recommend to all MSI GX660 owners this SSD!

MSI GX660, Power Input Broken, How To Use Warranty? OCC Doesn't Reply

Quoting what I wroteto OCC (Online Customer Service)
Quote
Power Input Broken, MSI GX660
Last September I bought an MSI GX660 laptop/notebook. A few weeks ago, I had problems charging it, as I had to adjust the alignment of the cable to get it to charge. The case got worse and worse, until it stopped charging completely last week. I have tried using another MSI charger, and it still does not charge, so I assume that the error is that the input for power has broken. How do I proceed with getting my notebook repaired on warranty?
It's been a week now, and no reply. I'm getting pretty damn mad about having a very good computer which is perfectly functional except for the fact I can't power it. Even more mad am I becoming at the fact that this should very well be included in the warranty, but MSI give very scarce information of how to use this warranty, thus disallowing me from getting my computer repaired. What I've managed to figure out is that I need this to be deemed by an MSI engineer or something as a valid case, and then I get a ticket which I can use when I send my computer to the nearest repair central, but how the hell am I supposed to get this warranty ticket? I thought it was through OCC?
Can anyone please help before I buy a plane ticket and personally shoot the one who arranged customer support in this extraordinarily stupid way? How am I supposed to make use of my warranty, and what have I understood wrong? Thanks on beforehand.
EDIT: Looked through another thread, where I found this link. http://support.msi.eu/en/contact.php
I have never seen that site before, and wonder why it can't be accessed from the main MSI webpage!
Since I live in Sweden, am I support to contact the given company in order to get my warranty, or is there a step inbetween with msi that I have to take?

Excuse the threath, it was supposed to be a joke. I just found the information given on how to handle the situation to be very scarce and insufficient. It made me frustrated, and I joked about how frustrated I was. I will refrain from such actions.
I called the company representing MSI repairs today, and found out that they were in fact the ones to contact, something not made very clear on the MSI website. I sent in a report, they accepted it, and my laptop is on the mail now. So much (unneccessary) waiting could've been skipped with better info.
About the error, I assure you that it is no act of violence that caused it. I only had the charger plugged in while the computer was placed on a table, and always transferred the computer in a belkin laptop backpack, with the charger in a separate storage on the bag. I can't see how any physical trauma/extensive pressure could've occured, especially since the problem kind of sneaked up on me. I have no idea how this issue was caused (production error seems somewhat unlikely, as you mentioned, but could still be a posibility), but it certainly was not because of me. Most apparently the repairing company saw it the same way as me as they accepted my warranty repair request, and that's really all that matter to me right now.
The point of this thread was however help with contacting warranty, support, etc. and I managed to figure that out by myself, even though you didn't really answer to that question. Thanks for your reply and your time, though.

Problem with System Control Manager on MSI GX660

HI.
I am new
I have problem with my MSI GX660.
Since yesterday SCM didn't work for me.
When windows starts, SCM have appcrash error and FN, and touchpad(eco,turbo,wifi) didn't work.
I installed the newest version of SCm but still didn't work.
I have Windows 7 x64
Sory for my English-I am from Polish

Quote from: Bas on 03-March-11, 02:24:11
Did you install SP1 yesterday?
I don't know did SP1 but I install some new updates yesterday.
This is the problem?

Is there Full Version MSI installer package for the last version of Adobe Reader?

Is there Full Version MSI installer package for the last version of Adobe Reader?
Where can we find it?
Thanks.

Hi,
The full MSI installer for the latest 9.5.0 release is available at:
ftp://ftp.adobe.com/pub/adobe/reader/win/9.x/9.5.0/en_US/AdbeRdr950_en_US.msi
However, there is no full MSI installer available for the latest 10.1.2 release, since it wasn't a single dot release. The Reader 10.1.2 installer is available as a MSP file which can be applied onto the Reader 10.1.0 or Reader 10.1.1 installation.
You could also create an AIP for the latest 10.1.2 release, which would give you a single MSI installer along with the extracted files. Please have a look at the below mentioned document for more details on the same:
http://kb2.adobe.com/cps/837/cpsid_83709/attachments/Acrobat_Enterprise_Administration.pdf
Hope this helps.
Thanks
Ankit

MSI GX633 DRIver For Linux

Please help me :
where can i
download
MSI GX633 DRIVER For
Linux
Please help help.
thank all manager

There are no drivers to download for Linux because a) MSI does not support Linux on their products, and b) your Linux distribution will normally already include all the drivers you need.
Which Linux distribution have you installed, and is there a particular driver you need?

Creating search help for a field in AdHoc Query

Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten

Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten

Need to restrict values in F4 help for Batch Characteristic

Hi,
I need to restrict values in F4 Help for a batch characteristic based on values entered for another characteristic. I could not find any BADI or Exit for this purpose. There is a BADI CACL_VALUE which is triggered after an entry is selected from dropdown list but nothing when we press F4. I thought of using Object Dependency but I need to write a programming logic for the requirement. Please let me know if there is any way to write program in Object Dependency or any other way for this requirement.
Regards,
Nikhil

Hi nikhil simha,
first of all, find out which search help is called.
[Hierarchy of the Search Help Call|http://help.sap.com/saphelp_nw70/helpdata/en/0b/32e9b798da11d295b800a0c929b3c3/frameset.htm]
may help you.
If you know the search help, you may enhance it, but first of all you should check the where-used-list and make sure that the search help shows the requested behavior only in the context where you want it to.
If it is your own program, you may be better off to create your own search help and define the triggering fields as search help interface input fields. Then you can use the values to filter results.
Regards
Clemens

Search Help for Vendor Feild not getting populated in the Screen Element

Hi Everyone,
In transaction Miro, I get a POP-UP for Invoicing Party i.e. Vendor and Users required a custom search help.
The Search help for Vendor(LIFNR) is KRED_C and i appended a Z search help under this.
Now that the search help exists and I can drill down the values too but when i select/choose any value, that value is not getting populated in Screen feild.
is there any validation I need to do for this.
Please suggest me... I checked SDN there are many things but i couldn't figure out wat i need to do and where I need to modify.
Regards,
Raj

Dear Hema,
Could you please tell me how many internal tables you are using to store the data for display.
I observerd that you have lt_stock and lt_mat2 declared in the part of the program
>DATA: lv_stock TYPE lty_stock.
>DATA: ltmat2 TYPE TABLE OF lty_mat.
you have displayed above, however you are also using ls_stock and lv_stock .
>IF p_ztotal = ' '. "line
>WRITE 18 ls_stock-matnr.
>WRITE 38 lv_stock-strgr.
>
>ELSEIF ztotal = 'S'.                             "subtotal
    >WRITE: 15 ls_stock-nrmit.
    >WRITE 32 lv_stock-dispo.
    >WRITE 43 lv_stock-fevor.
>ELSE.                                            "total
    >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
>
>ENDIF.
Are those for displaying some other information?
Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
Best Regards,
Rajesh.
Please reward points if found helpful.

Search help for SKAT-SAKNR OR SKAT-SAKNR is not working

Hi All,
I have created a Search Help for F4 in a dialog program for SKAT-SAKNR OR SKAT-SAKNR. While i click F4 on that field, it displays blank values.
Here is the module:
module HELP_FOR_SAPGL_ACC input.
CLEAR t_SAPGL.
SELECT SAKNR TXT20
    FROM SKAT
    INTO CORRESPONDING FIELDS OF TABLE t_SAPGL UP TO 1000 ROWS
    WHERE SPRAS = SY-LANGU.
   WHERE L_GL_ACC = v_FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    DDIC_STRUCTURE         = ' '
      RETFIELD               = 'SAKNR'
    PVALKEY                = ' '
     DYNPPROG               = PROGNAME
     DYNPNR                 = DYNNUM
     DYNPROFIELD            = 'SKA1-SKANR'
    STEPL                  = 0
    WINDOW_TITLE           =
    VALUE                  = ' '
     VALUE_ORG              = 'S'
    MULTIPLE_CHOICE        = ' '
    DISPLAY                = ' '
    CALLBACK_PROGRAM       = ' '
    CALLBACK_FORM          = ' '
    MARK_TAB               =
IMPORTING
    USER_RESET             =
    TABLES
      VALUE_TAB              = t_SAPGL
    FIELD_TAB              =
    RETURN_TAB             =
    DYNPFLD_MAPPING        =
EXCEPTIONS
    PARAMETER_ERROR        = 1
    NO_VALUES_FOUND        = 2
    OTHERS                 = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endmodule.
In the above code I am selecting 1000 rows from SKAT table and in the Search Help Popup it is also displaying 1000 rows but all are blank.
Please help me.
Regards,
Avaneet

Hi check my weblog on search help exit codeing..
https://wiki.sdn.sap.com/wiki/x/du0
\* Prepare for output
CALL FUNCTION 'F4UT_RESULTS_MAP'
TABLES
shlp_tab = shlp_tab
record_tab = record_tab
source_tab = lt_result
CHANGING
shlp = shlp
callcontrol = callcontrol
EXCEPTIONS
illegal_structure = 1
OTHERS = 2.
IF rc = 0.
callcontrol-step = 'DISP'.
ELSE.

MSI GX660, help for dissassembly

Similar Messages

Maybe you are looking for