MSI H55M-E32 will not detect Graphics card

HI,
I just bought a new cpu, i am using the intel intergrated graphics (on-board) at the moment. I tried installing radeon 9600 pro graphics card but the mobo does not detect it. Monitor is black screen, no boot up. btw the fan on radeon 9600pro is not spinning.
I tried using another graphics card that i have. A creative gf4 Ti4200. no boot up on monitor as well. fan not spinning.
How to get the motherboard to detect the graphics card...??? my computer does not detect any graphic cards..
I like to get radeon 9600pro working ...How to do it?
My comp:
Motherboard - MSI H55M-E32
cpu - Intel i3 540
mem - kingston 2gb ddr3 pc1333
psu - Vios 450w psu
os - win xp sp3
vid - Ati radeon 9600pro , creative gf4 Ti4200
Thanks.

and the other one is an ancient agpx 4 card as well
YOU DO NOT HAVE AN AGP SLOT TO PUT THEM IN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Similar Messages

MSI H55M ED55 will not boot

Hello everybody,
Recently I purchased said motherboard with a core i3 530 processor.
The problem is that windows fails to load. The pc restarts every time the Windows logo appears.
I have tried several things wich I will summarize:
I tried different Hdd's wich both had windows 7 64bit on it,
I tried to install windows via dvd, but the pc restarted again before the installation,
I tried different Psu's wich both work on another pc(this goes for all components btw except processor and mainbord),
I tried with and without the igp,
I tried different memory modules; one from OCZ and one from G.E.I.L. I tested them at 1066 and 1333 mhz with cas latancy 9-9-9-24 and mem voltage @ 1.5, 1.55 and 1.6 volts. The OCZ normaly runs @ 1600, cas 7-7-7-21 1.65 volt and the G.E.I.L. @ 1333 cas 9-9-9-24 1.5volt.
I tried with one, two and four memory sticks,
I tried to clear Cmos a dozen times(with the powercord removed) after the boot it says that the CMOS isn't correct or something like that. I get to choise to go to setup(F1) or to just continue(F2) I tried both,
I tried with BIOS 1.2, 1.6 and 1.7,
I also did a memtest via dos with the G.E.I.L. kit and a memtest via windows with the OCZ kit, they both succeeded without errors.
The capacity of the sticks is 2gb per stick.
The hdd was 1.5 tb and 80gb(IDE).
The PSU was also from OCZ(600watts) and the other one was 350 watts. I'm not sure about the brand, FSP electronics or something like that.
Does anybody know what might be wrong? The guy from whom I purchased it said that it had been working last time he used it. He seems like an honest bloke(lots of positive feedback and he was helpful).
One more thing btw, the temp of the processor was 26 degrees, wich must be cool enough.
Thank you for your time.

Quote from: Henry on 04-December-11, 07:30:50
I would recommend don't use the OCZ RAM as they have been problematic for lot lot of people and in fact OCZ stopped marketing RAM early this year. Also from what I've seen on this forum their PSU's seem to be not very good. The Geil RAM I don't know about. I've had good luck with the Crucial you see in my signature, that or Kingston value RAM (1333 1.5V) is plenty good enough for a system like yours. Don't know what RAM like that costs where you live but only about $30 USD at newegg for what I have.
I had an H55-GD65 and had a similar problem with PC crash/restarting sometimes not very often sometimes several time one time after another and it ended up a problem with RAM compatibility with the original BIOS. All of the 1156 socket MB's had quite a few BIOS updates for memory compatibility issues.
I don't see why you would need more than 2 x 2GB RAM for your system especially if it's just used for HTPC.
Do you know what BIOS version is currently on the MB? You can find that info in 'Start' > 'All programs' > 'Accessories' > 'System tools' > 'System information'
BIOS Version/Date American Megatrends Inc. V1.12, 6/8/2011
Currently I'm using 4GB of GeiL ram. The 8gb OCZ ram is in my other pc right now.
The BIOS I'm using is 1.7.
I tried with the IGP but that turned out to be more problematic. Then I inserted the graphics card and turned on the oc genie button and everything seems to be fine.
I will run orthos for a couple of hours and if the pc won't crash, then I think I solved my problem.
Strange, as it is ocing my pc right now and it's more stable than stock .

MSI H55M-E33 SATA Not Detected

I've been putting together a new computer with this H55 board fresh out of the box. No matter what I do though all my SATA ports still show up as Not Detected in my BIOS for my hard drive or disk drive. I've tried all kind of combinations with every port. I've even taken out the CMOS battery for a while.
Specs are:
MSI H55M-E33 motherboard
Intel Core i5-680 Clarkdale 3.6GHz 4MB L3 Cache
Western Digital 1.0 TB HDD Model WD1002FAEX-00Z3A0
Pioneer DVR-218LBK
Corsair 850HX Power Supply

Okay, so I cleared CMOS several times, and even tried a brand new hard drive and DVD drive with at least seven different sata cables and every sata slot I had. Still nothing showing up at all in CMOS.
Also, here's my Bios: A7587IMS V1.1 012210
I'm very new at putting computers together, but from my understanding Sata should pretty much be plug-and-play. Or at the very least plug-and-see.

Z77A-G45 will not detect video card.

I though that I was having trouble with a new gtx 760sc, so I RMA'd it. On-board video works fine. Still can't detect video card. Bought a new power as well(antec HCG-750). After i received the new video card and still had the same issues I tried out other video cards. Tried two different nvidia cards. One was a 4 series and one a 5 series. Tried in both pci-e slots, and yes the correct power cables were plugged in.

CPU looks fine.
Was finally able to breadboard the thing today. Had the same issues at first. Then I tried the third pcie slot and got post. This one is pcie2.0, so I tried the other slots again. Was able to get the 760 to boot on th second pcie slot. Put the mb back in the case and lost boot on card again. Reseated, same issue. Breadboarded and was able to get the card to post. Still no post in case. Can't see what could be causing a short. Rearranging the risers right now to see if is one of the risers causing a short, or maybe not enough clearance. Any other suggestions would be appreciated.

MSI 770-G45: Will not detect SSD.

My mother board can't detect my SSD but strangely enough it can detect my DVD drive (sorry, I don't know the name and model).
My computer was fine till I recently switched out my heat sink. I tried to turn on my computer and it wouldn't start at all; I noticed that I plugged in the wrong connectors into JFP1, so I fixed that and reconnected them into their proper pins. It powered on but that's about it so I cleared CMOS jumper which helped me get to the BIOS but now it can't detect my SSD to which it contains my OS. As I said, I can get to the BIOS but that's about it.
I'm at work so I can't tell you what BIOS version is on it but before clearing the CMOS it was at the latest BIOS version. I will have to confirm it's current version later.
I checked all connections, tried different SATA cords and other connections on my board. Still can't detect it.
OS: Windows 7
CPU: AMD HDT35TWFGRBOX Phenom II X6 1035T Processor - Six Core, 6MB L3 Cache, 3MB L2 Cache, 2.60GHz (3.10GHz Max Turbo), Socket AM3
MEMORY: G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBRL
HEATSINK: COOLER MASTER Hyper 212 Plus RR-B10-212P-G1 "Heatpipe Direct Contact" Long Life Sleeve 120mm CPU Cooler Compatible Intel Core i5 & Intel Core i7
FAN: COOLER MASTER SickleFlow 120 R4-L2R-20AR-R1 120mm Silent operation Red LED case fan
PSU: Thermaltake TR2 RX 750W Bronze W0382RU ATX 12V v2.3 / EPS 12V v2.91 SLI Ready CrossFire Ready 80 PLUS BRONZE Certified Modular Active PFC Power Supply
Video Card: EVGA 015-P3-1580-AR GeForce GTX 580 (Fermi) 1536MB 384-bit GDDR5 PCI
SSD: Kingston SSDNow V+100 KR-S1296-3H 2.5" 96GB SATA II MLC Internal Solid State Drive (SSD)

Quote from: Panther57 on 17-April-12, 09:49:53
My mistake... I was thinking you were running Raid with 2 SSD's...
Is your SSD in Sata 1? It is best to put your storage drives in the lower Sata connectors and your optical drives in the last, higher numbers. Possibly change out your Sata cable. Check that it is seated correctly. Having a single SSD you can set IDE, Raid disabled. If Raid is on, it will be looking for the raid program to control the drives. You don't have to run and do it, but a new Bios was released .9 (bios should only be updated if the changes benefit you) Also make sure the power lead to the SSD is seated. Possibly when you were installing your cooler, you didn't realize you... it happens.
Another option is to test your SSD in another PC and see if it shows up.
Are you using 'Del' or 'F11' to get into Bios.. I use 'F11'.. it's on the list.
I don't think I can update to 9. The latest is 10.8 according to MSI but if I can upgrade to 10.9 then I'll try that out.
Yeah, my SSD APPEARS to work; I plugged it into a hard drive enclosure and it powered on; plugged it to my laptop and it was able to read it; only thing was that I couldn't really do anything with it which I found odd. It didn't show up in my list of drives in windows explorer however it did appear in the disk management console (diskmgmt.msc at command prompt). This issue might be suspect.
One thing I didn't mention; to check to see if there was an issue with my SSD, I tried another SATA hard drive. At this point, I was able to detect my DVD drive but not my SSD so I figured I should try and see if I can read a normal hard drive. I plugged her and my computer didn't start. I put the normal hard drive back into its enclosure and it didn't work; the power light was red blinking; tried another enclosure similar results.

H55m-e23 not detecting video card

Hello i recently upgraded my pc with new video card (asus engtx570 directcu ii gtx 570) the problem is that main board(MSI H55M-E23) is not detecting video card, so here is what happens when i turn the pc on it starts to beep 1long beep and 2 short beeps. First i thought it might be power suply so i bought new power suply with 700w and still the same thing happens, then i tryed with LC850w and same thing so i guess the power supply is not the problem. I removed rams and tryed with 1 stick, i have 4 different sticks and same thing happened with each stick. i tested the videocard on different mainboard (ASUS P5Q PRO and ASUS P8H67-M PRO REV. 3.0) and videocard worked fine. i tested my mainboard H55M-E23 with sapphire ATI HD 6950 and it worked too so the pci slot is ok, and now i dont know what to do more i tested all things possible. So what is the problem? my mainboard does not want to detect videocard (asus engtx570 directcu ii gtx 570) 3beeps ( 1long and 2 short) PLEASE HELP!

CPU: Intel® Core™ i5-760 Processor Clock Speed 2.8 GHz Max Turbo Frequency 3.33 GHz
Main Board: Msi h55m-e23 Bios: AMI BIOS Version 17.4
Video Card: Asus GeForce ENGTX 570 Direct Cu II
Memory: Kingston 1x2GB 1333MHz DDR3 CL9 DIMM 1.5V
Apacer 1x2GB 1333Mhz DDR3 CL9 1.5V
PSU: LC 850W Arkangel LC8850, 140mm FAN, V2.2
850W max., ATX V2.2, Free-Plug cable-Management, Active-PFC, 3 x PCI-Express, 4 x +12V: 60A, S-ATA,
+3,3V: 30A
+5V: 28A
+12V1: 18A
+12V2: 18A
+12V3: 18A
+12V4: 18A
HD: Seagate Baracuda 7200 - 320GB
Windows 7 x64
For the memory ( i did try with only 1 stick at the time... they go well together with my other card Sapphire ATI HD 6950)

Msi x99 gaming 9 ack does not detect capture card when using with xsplit

msi x99 gaming 9 ack does not detect capture card when using with xsplit
i install every but still it does not work.

Hi
It wasn't hard to find your motherboard version:
http://www.msi.com/support/mb/Z68AGD80_B3.html#down-bios
Since your BIOS is v20.1, it couldn't be G3
Apart from checking BIOS, you can only check motherboard or moth...

MSI B85M-G43 could not detect Gigabyte R929OC 4GB 3X Windforce

I recently build a new PC a month ago and have been using it for 3 weeks then random black screens problem started to occur.
It started right around the time after I updated to catalyst 14.4 w/o the beta. At the same time i noticed windows update has updated some files which i did not note down what it was. Also Noticed that startup list had some new programs running.
I proceeded to disable the programs in startup, undo the latest windows update and finally reinstalled windows 8.1
Nothin works and I am left with black screen, which i realised that to be actually the mobo not detecting the card once i got a vga screen plugged in to mobo onboard graphics and went to BIOs to see.
Previously my BIOs were updated to latest through the liveupdate 5 program, which itself updated to liveupdate 6. For some reason I dont like programmes sitting at the back constantly checking for updates, so after updating those, I deleted all those programs. The updates also took forever to download, I figured i will download/install individually in future. Now that I do a search there is no live update 6?
Just to make sure, I have reflashed the BIOs to E7823IMS v3.6 again through the m-flash inside BIOs, but did not choose the BIOs + ME option as i dont know what it is. After reboot, BIOs version remained there, checked for ME and there's the version number 9.0.21.1462.
BIOs version: E7823IMS v3.6
ME version: 9.0.21.1462
Prior to the Win8.1 reinstall, my OS was sitting on my SSD in non UEFI mode, I chose to install in non-uefi as i dont know what it was then. When i tried to reinstall, somehow the boot priority identified the SSD as UEFI first, so i wanted to give it a try and proceeded to install win8.1 in UEFI until reboot failed. Then I decided to installed my win8.1 on my HD in non UEFI instead. The system, as usual, works using the integrated graphics and mobo could not detect the graphics card in the only PCIe 3.0 x16 slot. Should I plug it into the PCIe 2.0 x16 slot and try, It never occur to me until now as I thought that was the only slot my graphics card could use.
Please help
Here are my specs:
MSI B85M-G43
Intel i7-4770 3.4GHz
G.Skill Ripjaw 1600MHz (2 x 8)MB Blue
SSD Samsung Evolution 240GB
WD 1TB Blue
Gigabyte R929OC 4GB 3X Windforce
LG 24x DVD Writer
Corsair Carbide Air 540 Case
SeaSonic G-750 80+ GOLD Power Supply
ASUS PCE-N53 PCI-E Adapter
Windows 8.1 OEM
Qnix QX2710 Evolution II 27" matte PLS monitor (uses dual-DVI-D connector only)

try to update your bios again but use the BIOS + ME option as it will flash not only your bios but Intel ME at the same time.
Note: Don't remove your USB during bios flash as the system will restart for I think around 2 times and plugging out USB might kill the MB bios.
Did you modify any settings in the bios setup??
If updating bios not can't work, try to plug your card to second PCIE slot and see if it could boot or not.

MSI NEO-FISR Will not Boot

Specs
NEO-FISR Bios 3.60
Pentium 4 3.0 Ghz
1 gig (2 X 512) Kingston Valueram
Radeon 9600
Soundblaster Live! Value
CNET Nic (For reasons explained below).
I HAVE:
Unplugged everything except for boot HDD, Video, Sound, NIC, Mouse, Keyboard.
Reset CMOS Jumper
Held Ctrl Home
About a week ago, the NIC on the board went bad. I didn't want to RMA it since a PCI NIC is only 5 -10 bucks, and shipping is at least as much with no mobo for a month. So, I installed a PCI NIC.
No problems, been running fine until today. I was fiddling with my power strip, unplugging something and accidentily unplugged the PC, but I don't think this has anything to do with it because it booted once before then. When I plugged it in, it booted to Windows login and froze. Now it won't start at all. Not a power problem, because everything starts and spins up. Just no picture, nothing. The lights on the box thingy (forget what it's called, but you know what i mean, the thing with the USBS and the 4 lights), anyway, it'll light up the top Left one in green, then every once and a while, it'll light up all four in a flash, then go back to just top left. Keeps running, just no picture.
It's probaly not the graphics card, because the lights don't light up as they should.
It's not the monitor, I tried my secondary one.
It's not the CMOS, I used the jumper and reset it.
It's not the bios, because I havn't updated it recently (because MSI hasn't released one in ages).
Another odd quirk, the pc will usually turn off immediatly when the power is hit if it's still booting, but it does as if it's in windows. I have to hold it down for it to power off.
If It's broke i'm not really sure I want to RMA or just buy a new mobo/processor. It's a little out of date, plus I assume RMAing takes quite some time and I can't live without my fast machine for too long.

It worked! Wow that's wierd. I've never had something as minor as a NIC cause a complete blackout before.
Chalk that one down as the wierdest computer problem i've ever had.
Guess I shouldn't of used that old thing that was lying in my parts box! rofl, guess I'd better cough up 5 bucks for a new one!
Edit:
Holy crap now the onboard NIC works. Lol, thats quirky. One problem fixed another. I suppose my clearing the CMOS repaired something. Couple days ago i'd stick the cable in and it'd be black. Now it lights up like a firecracker and connects again. Sometimes these things just wanna make me do this: .

Lumia 625 does not detect MicroSD cards, please he...

My Lumia 625 does not detect MicroSD cards when inserted.
I have tried powering off/on.
I have tried formating them in my PC.
I have updated my phone to 3050.0000.1334.0007
I have tried a Kingston 64GB SDXC Class10
I have tried a Sandisk Ultra 64GB SDXC Class10
I have tried formatting the cards in various ways including exFAT / FAT32 / FAT64 etc.
The only progress i made was when i tried formatting in NTSC and after inserting the card i recieved a message saying "incomattable formatted card inserted, do you whish to format the card in a compattable format?" After choosing yes, the phone formatted the card and then the card was undetected...
This was confirmed by checking the card in my PC, which confirmed that the card had been formatted using exFAT, which i believe is the correct format for the phone/card.
Clearly the phone is somehow detecting and writing to the card and the card is functioning properly, except that the phone does not detect that the card exists as expanded memory and will not allow me to use it.
Any help with this would be really appreciated!
Becoming quite frustrated now...

Hi Pepperami33,
Have you tried to perform a reset? It will delete all your data so backup is required. See this link: http://www.windowsphone.com/en-us/how-to/wp8/basics/back-up-my-stuff for the steps on how to backup your files. After creating a backup, go to Settings > About > Reset your phone.
If the reset will not work, it is best to have your phone checked by our care point. Visit www.nokia.com/support for more info about the repair process.

Ricoh PCIe SDXC/MMC Host Controller does not detect SD cards

Hi,
My Lenovo Thinkpad X230 has an integrated 4-in-1 SD card reader (SD/SDHC/SDXCMMC), but it does not detect any card I insert. The two cards I have are working correctly under my sister's MacBook. My kernel version is 3.6.10. Here's the output of a few commands :
lspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Lenovo Device 21fa
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Subsystem: Lenovo Device 21fa
Kernel driver in use: i915
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: mei
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
Subsystem: Lenovo Device 21f3
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: i801_smbus
02:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 07)
Subsystem: Lenovo Device 21fa
Kernel driver in use: sdhci-pci
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. Device 8195
Kernel driver in use: rtl8192ce
lsmod | grep sd
sd_mod 29560 4
scsi_mod 133434 2 libata,sd_mod
sdhci_pci 10834 0
sdhci 23695 1 sdhci_pci
mmc_core 82791 2 sdhci,sdhci_pci
Nothing new happens if I type dmesg | tail after inserting a card.
I didn't find any solution after searching on Google, but it seems there are a few other people experiencing the same problem as me. I haven't actively tried anything yet.
I don't have much experience when it gets to this kind of things, so I hope there are some of you who can help me.
Thank you!
Last edited by Fayden (2012-12-22 05:13:09)

In case someone else has the same problem, there's actually a package in the AUR that fixes the problem : https://aur.archlinux.org/packages/ricoh-e823-fix/
Install it and enables it with systemd and it should work correctly!

K8N Neo Platnium not detecting PCI cards

This is my second K8N Neo 2 Platnium board. Both of them have failed to detect the cards in the PCI slots. I know for sure that both of the cards work in my old system since i had to switch back to my old parts when i was getting my first board RMAed. The two cards are:
Creative Audigy 2 ZS sound card
Promise 100TX ATA controller card
I've disabled the onboard audio in BIOS, but that wouldn't matter since its not detecting either card. I've done the "search for new hardware" wizard in Windows XP Pro w/ SP2 and all updates as of Sept 26, 2005. I've tested it both inside and outside of the case so it isn't shorting.
I am P*ssed off.
Frankly, this is unacceptable. Not only that, but upon inspecting the second board right out of the package, I saw that it has been ran before. Long enough for dust to collect on some caps and on the SATA slots around the nForce chipset. Also, there were little rings around the mounting holes from where screws have obviously been screwed in before.
Not to mention i had to call them to send my RMA out. Website said it was ready to be shipped on 9-14-2005, I called on 9-20-2005, and it finally shipped out the following day.
I am not happy with my MSI purchase. This coming after hearing so much good about this company. Unless this problem is resloved I doubt I'll ever buy another one of their products again.

I had a similar problem with a 945p neo platinum board. Anything I plug into any PCI slot didn't detect. I solved the problem by flashing to the latest BIOS for the board. Now everything seems to be working fine.
Maybe that might work for you?

HT1386 iTunes will not detect my iPhone(5s) after the most recent update.

Ever since i updated iTunes it will not detect my iPhone, every time i plug it in it asks to trust the computer which I always use to sync my iPhone. Every time i select "trust this computer" and it still won't detect it. PLEASE HELP.

Hello fercho965,
Sorry to hear that your iPhone is currently not recognized by iTunes. I found an article with steps you can take when you experience an issue like this. I wasn't sure whether you were using a Windows or Mac computer, so I included the respective articles for each:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Thank you for using Apple Support Communities.
Best,
Sheila M.

My imac will not detect external monitor after recent update. Is there a way to fix this?

I have a VGA monitor plugged in to my imac using the VGA adapter to the mini-DVI. All was working well. Since I updated over the weekend, the computer will not detect the monitor.
Any ideas how to fix this?

Pcantin wrote:
I have tried another VGA monitor and that failed as well. Since you don't think the update was the cause, it may be that the adapter I am using decided to call it quits. I will see if I can find another and test that out.
I will look into the external drive idea as well.
Thanks for your help on this.
I didn't think about the adaptor, but you should at least visually inspect both the adaptor and the cable at both ends. If one or more pins got bent even slightly the connection might fail. The cables can also fail internally. Replacing the adaptor and cable may be the quickest thing to do initially. If you want to try to save money, first replace the adaptor, and if the problem persists, then go replace the cable (or vice versa).

On a windows 7, ifinally got the Iphone4 setup so i can copy my pictures off of the phone. know itunes will not detect the iphone to get it synced. how do i get it back to be seen by Itunes?

On a windows 7, i finally got the Iphone4 setup so i can copy my pictures off of the phone. Know itunes will not detect the iphone to get it synced. how do i get it back to be seen by Itunes?

See earlier post by tt2
https://discussions.apple.com/message/7217190#7217190

MSI H55M-E32 will not detect Graphics card

Similar Messages

Maybe you are looking for