MSI h61m-p21 has overclocking option but its not working

hi msi i have h61m-21 and even it has oc option in bios but its not letting me set my ram to 1600 i have 1600 fsb ram please help.

Quote from: Bernhard on 17-November-11, 19:51:36
You think you need 1600. What do you need it for?
Please read this: https://forum-en.msi.com/index.php?topic=147704.0
If you still believe that 1600 will make a noteworthy difference, then unfortunately you will have to consider a board with a different chipset. The mem controller is part of the CPU which cannot be overclocked on this chipset.
i know that all but my stupid friend wants it to run at 1600

Similar Messages

  • MOVED: MSI h61m-p21 has overclocking option but its not working

    This topic has been moved to Overclockers & Undervolting & Modding Corner.
    https://forum-en.msi.com/index.php?topic=154225.0

    Quote from: Bernhard on 17-November-11, 19:51:36
    You think you need 1600. What do you need it for?
    Please read this: https://forum-en.msi.com/index.php?topic=147704.0
    If you still believe that 1600 will make a noteworthy difference, then unfortunately you will have to consider a board with a different chipset. The mem controller is part of the CPU which cannot be overclocked on this chipset.
    i know that all but my stupid friend wants it to run at 1600

  • My phone died last night and when I plugged it in it wouldn't turn on.I tried restarting it but it has yet to turn on since last night,It was just a black screen,i try the on/off and home buttons together but its not working,What should I do?

    My phone died last night and when I plugged it in it wouldn't turn on.I tried restarting it but it has yet to turn on since last night,It was just a black screen,i try the on/off and home buttons together but its not working,What should I do?

    How long have you had your phone? Because if you've had it a long time, the battery in the phone might of died on you. Or have you dropped it in water, snow, from high up? All those things could of disconnected something internally in your phone, or permentaly damaged the internal hard drive its self, or the sims card.

  • I want to reduce pdf size up to 5mb for mailing perpose, anybody have any option to reduce it since I have used optimiser & reduce file size option but its not helpfull.

    I want to reduce pdf size up to 5mb for mailing perpose, anybody have any option to reduce it since I have used optimizer & reduce file size option but its not helpful.

    The optimizer can reduce space, but some things can't get smaller. Text for example. Play with the settings, examine the results of Audit Space Usage.
    Or give up. Even 5 MB is too large for a bulk mailing, by far. Instead put it on your web site and mail a link - done!

  • I forget my password to my ipod and i have try to rerstart it but its not working what should i do?

    i forget my password to my ipod and i have try to restart it but its not working. i have done i could think of please help!!

    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
      1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
      2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
      3. iOS- Understanding passcodes
      4. What to Do If You've Forgotten Your iPhone's Passcode
      5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the
              Back Up option. If you have just backed up the device, it is not necessary
              to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

  • I bought my iphone 4 through ebay and its unlocked. the problem is that my phone does not sync straight away. I sync my music file through autofill. I want to sync ringtones but its not working

    i bought my iphone 4 through ebay and its unlocked. the problem is that my phone does not sync straight away. I sync my music file through autofill. I want to sync ringtones but its not working.
    I saw cidya aap so i m not sure if it was jailbroken or not before but it is back to normal settings.
    My problem started when I tried to sync my music files. I pressed 'sync' all it says is waiting for sync start, preparing to sync and then waiting for the changes to be applied. but it does not sync at all.
    I found a way to sync my music files through autofill but I really wanted to sync ringtones but its not syncing and I really wanted to put ringtones in my phone please help.

    If you see the cidya app, your iPhone is hacked with the cutsie term for this being jailbroken. This also means all the built in security has been removed making the iPhone as insecure as an android device.
    Restore the iPhone with iTunes as a new iPhone or not from the backup to get rid of that hacking garbage. If the iPhone has hacked to be unlocked, the iPhone will no longer be unlocked when doing so.

  • HT4865 Have tried to verify my icloud account, but its not working the Verifying screen is just scrolling round, but not doing anything

    Have tried to verify my icloud account, but its not working, the Verifying screen has been scrolling for ages now, it seems stuck, but it wont let me do anything, please help

    " I ordered the Snow Leopard software and tried installing it, but it stopped and said to clean the disk."
    First off, your installation disc is in all likelihood faulty.
    This has been a known issue in the past:
    Faulty Snow Leopard install discs - Apple has no timeline on ...
    http://store.apple.com/us/help/returns_refund#policy:
    *You can return software, provided that it has not been installed on any computer. Software that contains a printed software license may not be returned if the seal or sticker on the software media packaging is broken.

  • I baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

    i baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working. when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I bought an app but its not working!

    I bought the pocket dictionary app pro for £2 but now it's installed, its gone straight to the unistalled section on my blaackberry app world and won't let me reinstall it. I've paid for it but its not working. Any suggestions?

    Hello chloewilliams
    Welcome to BlackBerry Support Community Forums
    First  Clear your App World Cache for that :
    Open App World  >  Go to My World > 
    Keyboard based – Hold down the ALT key and then press RST
    For Touch Screen Only BBs -- Hold the num-lock  button so it locks and then press, in sequence 3, then 4, then (
    KB24714 How to clear the BlackBerry App World cache
    App World shall Close
    Please Perform a Battery Pull Restart like this While Device is Powered On remove the Battery wait for a min. then re-insert it back wait till the device take a long Reboot.
    After that please have a try and see if it allow you the Install option.
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Ive tried to reset my iclouds password but its not working

    i need to activate iphone 4s, ive tried on my laptop to re-set it but its not working, ive been trying for the pass 3hours?
    i just want to use my phone again?
    i cant remember setting a password?
    I aslo cant remember if i created two different passwords for iclouds and appleID.
    NEED HELP?

    Contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

  • My vreative cloud downloaded and so did PS but now its saying there is an error...update failed and im retrying it but its not working what do i  do?

    my creative cloud downloaded and so did PS but now its saying there is an error...update failed and im retrying it but its not working what do i  do?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Storeand turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • I just got the new i pod touch and im trying to get my wi fi on with my grandparents passcode but its not working, what do i do?

    i just got a new i pod and cant connect to wi fi im putting in the right passcode but its not working what should i do?

    Try:
    - A reset. Nothing will be lost
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Powering off and then back on the router.
    - Resetting network settings: Settings>General>Reset>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • I just buy operativesystem onlocker from 3 webshop i got the mail and it says i need to but it on itunes i do the all  steps but its not working its lockt to 3!

    i just buy operativesystem onlocker from 3 webshop i got the mail and it says i need to but it on itunes i do the all  steps but its not working its lockt to 3!

    sorry my english is very cash I think we got the paper on the lock operator and we have done all the steps but it will not play if it is unlocked, bought locked to three paid 350kr

  • HT1212 i forgot my passcode, i did whatever was told to me from the above information but its not working.

    i forgot my passcode, i did whatever was told to me from the above information but its not working.

    Forgotten Screen-Lock Passcode
    Connect the iOS device to your computer and try to make a backup
    iOS: How to back up
    Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up    
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store    
    If problems, what exactlyhappens or does not happen and when?

  • I have two iphones , i lost one  and entered to find my iphone and as mistake i block both and delate all the data of both. how can i get it on, im trying to restore it , but its not working ...

    i have two iphones , i lost one  and entered to find my iphone and as mistake i block both and delate all the data of both. how can i get it on, im trying to restore it , but its not working ...

    Hi Roger
    Thank you for your reply.
    My original feed is: http://casa-egypt.com/feed/
    However, because I modified the feed http://feeds.feedburner.com/imananddinasbroadcast and nothing changed, I redirected it to another feed and then I deleted this feed.
    Is there any way to change the feed in itunes? The only feed I have now is  http://feeds.feedburner.com/CasaEgyptStation
    I tried to restore the feed http://feeds.feedburner.com/imananddinasbroadcast but feedburner refused.
    I know that I missed things up but I still have hope in working things out.
    Thanks is advance.
    Dina
    Message was edited by: dinadik

Maybe you are looking for

  • Mail not working.. no error message

    Good day everyone! I have a problem since two days now. I have mail not updating email received and not sending email either. Tried the "Connection Doctor", and it says connections are ok. I have no problems to open and type a new message, but looks

  • To determine the amount of space currently used in each tablespace

    I am preparing for OCA and came through a question. QUESTION 389 You need to determine the amount of space currently used in each tablespace. You can retrieve this information in a single SQL statement using only one DBA view in the FROM clause provi

  • DELETE_RECORD changes the Record_status to 'NEW' HELP ME

    Hi Gurus, I have only one record in my block. I am trying to delete it and it executed all the Triggers like PRE-DELETE, KEY-DEL-RECORD succesfully. But when I save it, it gives FRM-40202. This only happens when I try to delete the last record in the

  • Graph in a webreport

    Hi, I want to create a graph in webreport with only one Char in Y Axis and one KF in X Axis. How do we do that? When I try to create a graph with columns, all the KFs are being shown. Also, I have a date field in the cube which should be shown as onl

  • Not able to Add Database to Failsafe

    Dear all, Hope you guys are doing fine. I am getting the weird errors when trying to add the database to my fail safe. Verification runs quite fine The error log is Oracle Database 10g CRS Release 10.2.0.4.0 Production Copyright 1996, 2008 Oracle. Al