MSI H61MA-E35 - After bios update PC not sleeping correctly

Hi,
I have just built up a pc with the motherboard H61MA-E35. Initially I had windows installed and when hitting sleep the PC would go into sleep with all monitors, fans, power supplies all turned off. After I updated to the latest BIOS 7740V20 I am having issues with the power saving features. The PC goes into sleep and my monitors, mouse and keyboard are turned off. The pc fans, cpu fan and power supply still remains on and the power light doesn't blink as it should.
I had thought initially this was a windows/driver problem. I installed a fresh copy of windows and all the drivers supplied. I also updated to the latest drivers via liveupdate. This didn't resolve the issue. I then thought it was a power supply issue and so I installed another power supply into the machine and this did not solve the issue also.
I tried to downgrade the BIOS to the older version 7740V12 but I can't as it tells me that the ROM FILE ROMID IS NOT COMPATIBLE WITH THE EXISTING BIOS ROMID.
Any help on how to resolve this will be much appreciated.
Thanks
Castor

Quote
Any ideas if there are issues with this Bios version causing pc not to sleep completely or shutdown completely. Just tried shutting down and peripherals and monitor turn off but the pc fans and CPU fan, power supply and power light remain on.
Ah ok, it wouldn't flash to a Sandy version at all, had misinterpreted that, sorry. Then the chip corruption was avoided, that is a good thing.
It might be a setting someplace that needs to be disabled. Maybe EuP 2013 or C-State?

Similar Messages

After bios update, will not boot, says install an operating system

I have a amd hp 2000 notebook. i replaced the hard drive with an ss drive, windows 7. been working fine until the bios update, I bleieve, which lost the boot up parameters. how do I get it to boot. hard drive works well in another system so not that. getting the usual message, boot dvice not found, install an operating system, F2 diagnostics all pass. Hard disk (3F0) message
should one revert to earlier bios, usually not recommended. bios version 45 it says, so not sure the latest.

jwess wrote:
I have a amd hp 2000 notebook. i replaced the hard drive with an ss drive, windows 7. been working fine until the bios update, I bleieve, which lost the boot up parameters. how do I get it to boot. hard drive works well in another system so not that. getting the usual message, boot dvice not found, install an operating system, F2 diagnostics all pass. Hard disk (3F0) message
should one revert to earlier bios, usually not recommended. bios version 45 it says, so not sure the latest.

Satellite A100 bios update does not work correctly

Hi,
I have a Satellite A100-153 PSAA9E and using Vista OS.
How do I install the new bios?? I run the .exe and nothing happens it shows that it extracts some files and then a notepad text appears that says something like this.
' INVENEC Pre-Flash Script for SanAntonio10
' 09/26/2006 Version 1.0.0.3
On Error Resume Next
'=== Declare Variables & Objects
Dim WshObj, objArgs
Dim WMIObj, chipset
Dim InfoStr, WorkPath
Dim VideoType
Dim fso, oFile etc....
and then an error appears that says if the SanAntonion10 BIOS590MP.exe is installed correct.
pls help

Hm, sounds a little bit weird. I would suggest you to do the following:
go to the drivers download page
-> http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Download the latest common modules if available and RE-download the BIOS update.
Then try it again. If this doesnt help then perform a full system recovery, download the BIOS update and then it MUST work.
Greets

Two new IDE-Controllers after BIOS update, but not installable

Hi there,
i recently updated my bios to the latest version and now the following strange thing happens:
when i boot my machine (875P NEO, P4 2.8 GHz, 1 GB RAM, 2 Otical drives at IDE0, 2 S-ATA drives at the S-ATA-controller, WIN XP SP), there are two new IDE (primary and secondary) Chanels to be found by the system.
Windows seems to act normal as it states them "new device found" (all that in german as i live here and tries to install the proper drivers, i think.
but then the new-devices-assistant pops up and tells me, that they cannot be installed because there are no drivers for my system.
i even used the actual inf-drivers from the msi-site.
that will happen at every start. in the hardware-manager there are both ide-devices marked as non-functional with a yellow sign in front of them with a exclamation mark in it.
oh, and my office installation wants the same .cab-file from the installation-cd everytime i boot the system.
the bios was the only thing changed.
does anyone have an idea whatr to do?
thanks in advance, cpo
(hope that all is understandable

yeah, seems like the same symptoms.
my version was 3.6 from october 2004. Version 3.5 from september works fine except for the cpu temperature beeing displayed too high in bios...
rollback to 2.5 did not work, still the same though i did not do the thing with the cmos-reset via jumper. will try this today...

Presario CQ61-104SV after bios update computer not start

Hello,
I made an update on BIOS inside windows. When the update start the fan start working very noisy. The update ended succesfully and shutdown the computer. The computer was connected to AC power without battery. After the shutdown the computer can not start. When I connect it to power, the power led turn on for 4 seconds and then turn off. I tried the keys combination (windows keys + B + power button) but nothing happen. The computer seems to be dead. Can anyone help me?
Thanks.

yeah, seems like the same symptoms.
my version was 3.6 from october 2004. Version 3.5 from september works fine except for the cpu temperature beeing displayed too high in bios...
rollback to 2.5 did not work, still the same though i did not do the thing with the cmos-reset via jumper. will try this today...

Satellite L650 - ODD does not read most of CDs or DVD's after BIOS update

While copying DVD's I was asked to do a bios upgrade from the software that came on my laptop, so i thought coming from toshibsa it should be safe. I closed all my applications and let the update happen, restarted my pc and tried to continue to copy my dvd's.
Now my dvd writer does not read most of my cds or DVD's,originals as well.
I have managed to get hold of my previous Bios version after quite a battle before the update to see if i can go back to my old version but the exe file runs a program that says the version is older then the one i am using so it will not load it.
Any help would be greatly appreciated as i have two days to copy 100 DVD's for a client and i am unable to do this now,
I have a Toshiba Satellite L650 laptop running windows 7 64 bit 8 gigs memory with a SSD Hard drive

> i can go back to my old version but the exe file runs a program that says the version is older then the one i am using so it will not load it
I dont think that BIOS is the problem here the point is that the CD and DVD support details are stored in the CD/DVD drive firmware and NOT in the notebook BIOS.
So in my opinion the BIOS update is not the reason for your issue.
I think you should check if laser lens cleaning would help you to read the disks.
Use an cotton wool tip and alcohol fluid to clean gently the laser lens.

After BIOS update DVD driver do not read DVDs anymore - Sat A80

Hi,
I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
Can I reinstall the old bios? Can I reinstall the firmware?
Thanks
Ronai Lisboa

Hi Ronai
Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
However, it's nice that you have solved the problem and that the drive works properly.
Thanks for the feedback.

After bios update, my window media player got hang and headphone clarity is not proper

HP Pavilion g6 after bios update, my window media player got hang and headphone clarity is not proper

Hello mathewstays,
Which model of g6 do you have? Which operating system? I'll be able to better assist when I know this information.
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

After bios update side nomberpad is not workinh keys from 0-9

after bios update side nomberpad is not workinh keys from 0-9

Hello jay04,
Welcome to the HP Forums!
I understand the number keys do not work on your keyboard. I will do my best to assist you. First, I require the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Does this occur on certain programs, or all programs?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
Thanks!
Mario
I worked on behalf of HP.

Satellite A series does not start up after BIOS update

After bios update with downloaded utility my notebook does not start up.
Did this case covered by warranty?

Im not quite sure if this would be covered by warranty. You should contact the ASP in your country for details but I presume its not covered.
PS: Did you try this workaround:
- remove battery, disconnect the AC adaptor
- wait ~ 40min
- connect both devices again and try to power up the notebook

M93P Tiny - Bios Update - Does not want to boot hdd, usb, cd rom or over network after update

M93P Tiny - Bios Update - Does not want to boot hdd, usb, cd rom or over network after update
Bios
FBKTB0A
3/31/2015
The bios shows updated and i can go into the bios but the ram amount and frequency does not show rite and it also does not want to boot any of those items.
Please advise.
Thank You

Hello all,
I, too, found this oversight on the part of Lenovo to be quite distressing. It is possible to upgrade the X61 BIOS with a USB thumb drive. I have provided directions at http://ubuntuforums.org/showthread.php?t=817897
The above tutorial is aimed towards Ubuntu Linux users. However, I believe that users of Vista should be able to follow along. Please let me know if you have any questions... the process is simple enough that it should be possible with any OS out there right now.
Mike

MSI H61MA-E35

Hi,
I've just recently bough a MSI H61MA-E35 and i have a big problem :
The pc works perfectly with only one slot of ram, the slot N°2.
If i had ram on RAM 1 slot, the pc boot few seconds then shut dow then boot infinitly.
I test my ram (2gb * 2) and each one with Memory test, no problem.
I alternatly use one then the other to lauch the PC, no problem as soon as i use only Ram 2 Slot.
If i dare to add ram on Ram 1 the PC boot then shut downi immetidatly after few seconds.
So iam froce to work with 2Gb of Ram instead of my 4Gb. Otherwise, i shoud by a 4gb Ram instead.
Why should i do to change that in BIOS ?
I precise : all others components have been test and are OK.
Thanks for your support.

Please state all your components. See my signature as an example.
The CPU seating is sometimes the cause of RAM slot problems.
It may be that one or more pins of your CPU socket were bent upon installation ?

Problem in booting after bios update

Originally, it was windows home basic was installed in my laptop. But recently I had installed Windows professional. After installation I have downloaded all drivers which are compatible for my laptop model. After BIOS update installation my pc is not booting up at all. Only power button, WiFi and capslock is lighting. Capslock is continuosly blicking. Even FAN speed gets lowered. I have tried hard reset as well as windows+B comand during startup still condition is same. Please reply me....

see help 8....
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

After BIOS update Satellite L350-172 doesn't start anymore

Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
"It was stopped for reason not to damage the Computer" - blue schreen.
How can I downgrade the bios again? Or - what have I to change in the bios-settings?

Hi schuwe,
Im a little bit confused about your posting. How do you tell your BIOS not to restart?
Anyway, after BIOS update you should load the default settings in BIOS.
Did you choose the right BIOS especially for your model?

Satellite Pro L300: BSOD after BIOS update

Hi
after update the Bios of Satellite Pro L300, the windows not start!
Its show the blue dead screen!
What can i do?

Hi
Are you able to access the BIOS settings?
Im not quite sure why this BSOD appears but possibly the SATA mode settings have been changed after BIOS update
Usually the SATA mode should be set to AHCI if the SATA drivers are installed.
But if the SATA drivers are not included the SATA mode should be set to compatible.
Please check this!
Furthermore you could set the BIOS to the default settings and could try to boot the machine again.

MSI H61MA-E35 - After bios update PC not sleeping correctly

Similar Messages

Maybe you are looking for