MSI H67MA ED55 - Can't activate crossfire EDITED

Hi, I know that crossfire is not officially supported on MSI H67MA ED55 but I see that some H67 board from other manufacturer (like Gigabyte) can enabled it.
So i just wanna know if MSI disable it or if it's just my computer which is had a problem and that I can make it word with my board.
Thx guys for the answer.

Quote
Can this (slot) be used by other types of PCIe cards then?
To my understanding, with a VGA filling the primary 16X slot, the second slot will only support a 1X device. If your add-in cards are 1x, then they are supposed to work. If the primary drops to 8x, then the other slot should also cover up to an 8X add-in. But it is not real clear about that.

Similar Messages

MSI H67MA-ED55 (B3) - Booting Time

Hi,
I use a MSI H67MA-ED55 (B3) motherboard with an Intel Core i7 2600K processor. However, the booting time of the motherboard is from my point of view very slow. It takes over 40s until the Windows 7 Logo is shown, during the booting process the number "98" is shown in the lower right corner. Therefore I was wondering, how I can increase the booting time, because 40s is rather inacceptable. I hope you can help me. Thank you very much in advance

EuP2013 is an energy compliancy standard that all producers of electrical and electronic equipement must have in place by 2013, else I believe their products may not be sold in especially european markets anymore.
For the normal consumer, it means that a EuP2013 product may not consume more than 0,50W when in standby mode. Thats quite aggressive and the EuP provisioning in the BIOS supposedly ensures that the motherboard stays within that tolerance whenever the PC goes into full standby mode. This power saving feature though has some unwanted side effects at times and numerous users have found that some of their unexplained problems disappear after this feature is disabled.
Here is an overview http://www.intertek.com/electrical/eup-directive/faq/

Msi h67ma ed55(B3), 2500k problem

   Hello everybody!
   I have a problem and I hope someone can help me. I bought a Msi h67ma ed55(B3) motherboard with a pentium g620 processor. Now I want to buy a core i5 2500K (for OC), but i do not know if I will be able to overclock it.
   Will I be able to set the multiplier in bios as high as I want, or are there some limitations to the h67 chipset ?
   Thanks!

Quote
I'm not convinced yet.
Then, the best thing is probably to go ahead and buy the 2500K, put it in and try to overclock it. You will then find out, that you won't have much luck with that. I am sure, you will be convinced then...
... you will make the same experience as this user did:
---> https://forum-en.msi.com/index.php?topic=152339.msg1127719#msg1127719
Quote
I'm getting the impression that you can't really overclock the H67 series.
Quote
no matter what I do, the processor stays at 3.3 gHz.
So, again:
http://rethinkthought.com/intel-sandy-bridges-h67-p67-and-z68-differences-explained/
Quote
Anyway, bottom line is this.
H67 – Onboard graphics are enabled, while overclocking is disabled
P67 – You need a graphics card for this chipset – onboard graphics is disabled, however overclocking is enabled here
Z68 – You guessed it…best of both worlds. Onboard graphics are enabled, as is overclocking

Can't activate Digital Editions

Can't activate Digital Editions. Error: E_ADEPT_REQUEST_EXPIRED http://adeactivate.adobe.com/adept/Activate 2012-09-02T13:32:48-07:00%20(1346617968000)%20is%20before%202012-09-02T14:06:49-07:00%20( 1346620009678) I checked date and time zone of computer (and tried all possibilities. I have moved from Ghana to Europe to Canada in recent years). Also activated immediately after download, so 'good until' time should not have passed. What now?

Thanks A LOT!! I have been going crazy for the past hour trying to understand why I kept getting that error message when I tried to authorize my computer. I even contacted customer service through chat but they couldn't help me.
So yes, same thing as you : the way to finally manage to authorize the computer was to CHANGE THE TIME. Actually, funnily enough, what worked for me was changing the Time Zone. I think it's based on what address or city you give when you register.
For example, for me, I had the right time for my city, but the wrong Time Zone. Once everything matched, it worked.
So for those of you who get that "REQUEST_EXPIRED" error message, you now know what to do!

MSI H67MA-ED55 B3 memory compatibility

Hello everyone,
I'm interested to buy the MB named in the topic AND a pair of RAM modules.
The modules are made by Mushkin. They got the following ID code: 991586, Essentials Series, DDR3 1333, 2 GB.
Does anyone know if there are any compatibility issues with the MSI motherboard (H67MA-ED55)?
They got a nice price and lifetime warranty.
Thank You.

Those are good, JEDEC-standard compliant modules. I have not really seen any other user who uses them (or perhaps I simply don't remember), but there is no reason at this point to assume that there would be any compatibility problems. The memory controller is part of the CPU and natively supports DDR3-1333 1.5V+/-0.075V modules and that is exactly what those modules are.

I can not activate Photoshop (edit: CS2) over the Internet. Can you help me?

I can not activate Photoshop over the Internet. Can you help me?

why can't you and what version and what os?
if there's a connection issue, Sign in, activation, or connection errors | CS5.5 and later

When I try to activate my prepaid CC card I get: "This card was purchased in a country that does not match your Adobe ID." I bought it in the USA for use here in the UK...how can I activate it? It is a student edition. Thanks

When I try to activate my prepaid CC card I get: "This card was purchased in a country that does not match your Adobe ID." I bought it in the USA for use here in the UK...how can I activate it? It is a student edition. Thanks

I don't know that you can purchase in one country and use it in another. Try contactoing Adobe support thru chat:
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

I am unable to activate Digital Editions; I keep getting an "expired" notice, can anyone help?

I am unable to activate Digital Editions; I keep getting an "expired" notice. I tried uninstalling and re installing but it didn't help. Can anyone help?

Click here and follow the instructions.
(99027)

Have Adobe's Digital Edition, now I wanted per bookcase the books in a list printing, but printing can not activate. I cannot get it working to someway to print lists. Please tell me what the cause is that this fails or what should I change to get the lis

have Adobe's Digital Edition, now I wanted per bookcase the books in a list printing, but printing can not activate. I cannot get it working to someway to print lists. Please tell me what the cause is that this fails or what should I change to get the lists be printed

Hello, Edward and thank you for your note.
I read through the thread you mentioned and it seems that people are having a lot of problems with the iCloud clients, so we're not alone, but the unique issue in my case is the failing email address vs. the working perfectly email address.
After reading your message tonight, I tried my setup again with the preferred Apple ID (the one without the "." between the names), and for the first time ever, IT WORKS. Mail app configured the servers both send and receive as p01-smtp.mail.me.com and p01-imap.mail.me.com. For the first time, I'm able to send and receive into the Mail app, create mailboxes, move messages into and out of mailboxes, keep Sent messages, etc.
I had a 50-minute support chat with MobileMe support via ExpressLane on Monday afternoon. They couldn't resolve my issue but passed me on to escalation. I was told to expect to get an email from advanced support by this afternoon, but none has arrived. However, so far tonight -- and I will check again tomorrow several times before declaring victory -- it looks like something has been fixed on the Apple end to make things work.
I will report back after I do some additional testing tomorrow to make sure the fix is real and is solid...and before I let my friend, the new Mac user, know the good news.
Regards,
Mike

Msi h67ma-e55 (b3): continuous reboots, no video out, dual bios problem?

hi,
I'm here with a new problem.
I got this motherboard h67ma-e55 (b3) "reconditioned" by the seller.
I tried it with a celeron g550 & DDR3 module in 1600 and later in 1333, no hdd and no dvd.
coolermaster silent pro 550W power supply (80plus bronze)
the motherboard to boot has black screen after a few seconds, restart it, and it continues like this forever.
tried to remove battery, clear CMOS, and change all the slots of ram, but always the same problem ... no successful boot
according to the manual, this motherboard would have a dual boot:
Quote
Dual BIOS LED
The Dual BIOS LED indicates the BIOS status during system power on. Follow the
instructions below to read.
Off: Normal.
Blink (1 cycle/second): The primary BIOS failed.
Solid: Both primary and secondary BIOS failed.
alternately blink at boot are different, so I think that the motherboard before trying to start with a bios, but fails to do this .. then with the other bios, but can not even ... and this all the time!
What can I do for it?
a super hard reset?
there is a procedure to flash the bios in this situation from pendrive?
http://www.msi.com/product/mb/H67MA-ED55--B3-.html
thanks
max

thank you for your reply, svet!
I did everything out of the case, open air, even removed the battery, with single ram on different slot every time I try start it, without vga....but nothing changes!!
I believe that if I can not force bios setup, I can not start the system properly ..
The card come back by RMA (it's written on the box), sold by super ebay power seller.
the seller (very helpful, he said he takes the card back) said he has not tested the card, but I'm surprised that MSI service center did not fix it with the new double Bios.

Difference between H67MA-E45 and H67MA-ED55

Hi,
what are the differences between the H67MA-E45 and the H67MA-ED55 boards, besides their different PCIe slots?
Thanks

See here http://www.msi.com/product/mb/H67MA-E45--B3-.html#/?div=Detail
and here http://www.msi.com/product/mb/H67MA-ED55--B3-.html#/?div=Detail
Looks like voltage checkpoints are lacking on the E45.
Normally the higher numbered boards have more BIOS options available too and their VRM components usually allow for more stable overclocking.
As can be seen on the MB photo the heatsinks surrounding the CPU are also lacking on the E45.

Can't activate windows vista

I am trying to install Windows Vista Business (retail boxed) 64 bit. The box didn't include 64 bit media and so I've downloaded it from technet. The install asks for the product key but it is not accepted "your product key cannot be validated.
Review your product key and make sure that you have entered it correctly".
I have been in a chat with microsoft for 2.5 hours so far and they have referred me to this forum. I don't feel that I am getting anywhere and I am incredibly frustrated.
I enclose the contents of the chat so that you can see what has already been discussed and what steps have already been taken.
You are now chatting with 'Ethan'.
Ethan: at 10:05:35
Hello Craig. Welcome to the TechNet Online Concierge. How may I assist you today?
Ethan: at 10:07:56
Excuse me, Craig, are you there?
Craig Stenton: at 10:08:01
Hi Ethan. I believe I spoke to you yesterday. I have a retail boxed version of Vista that has been unused that I'd like to use, but it only includes media for 32 bit and I am trying to obtain the media for 64 bit. I was given a link to download the software,
which I have done but my product key doesn't work with the software - product key cannot be validated. The software that I have is Vista Business (box)
Ethan: at 10:09:36
Thanks for your inquiry. In that case, you may claim a product key from the downloading page by clicking the "Product Keys" button.
Ethan: at 10:10:06
Or do you still want to use that product key?
Craig Stenton: at 10:11:07
That's ok if I can legally do that. The software will not be used by me and so I'm not sure the technet license should be used by another. I'm ok with it because I know that I have got a license for Vista. Is that ok legally?
Craig Stenton: at 10:12:01
Also, now that Microsoft is finishing the technet program, what happens to the license keys? Will they become invalid at some point in time?
Ethan: at 10:12:40
Technically, they will continue to work as usual. However, according to TechNet Licensing Terms, you must remove all TechNet products after your subscription expires. There is no perpetual use rights for any TechNet subscription.
Craig Stenton: at 10:16:08
So how does that relate to this enquiry? If I use the technet license and then my subscription expires then I can no-longer use the technet product key. Is it ok to continue to use it in place of the one with the boxed product? If it will work technically,
and I can prove that I have one product key (that I am not using for technical reasons) is that ok?
Ethan: at 10:18:06
In this case, I'd like to check your product key for you. Could you please send the key to [email protected] with "To Ethan" included in the subject so that I could know the issue better? Thanks.
Ethan: at 10:20:45
I mean I'd like to check why the key can't activate your media so that I could tell you if there is any other solutions.
Craig Stenton: at 10:22:01
My media only seems to install 32 bit but the license covers 32 bit and 64 bit. I need 64 bit media.
Craig Stenton: at 10:22:46
My product key doesn't work with the 64 bit media that I have downloaded from technet.
Ethan: at 10:23:38
Excuse me, you mean your product key is a 32 bit key, right?
Craig Stenton: at 10:24:22
I have a product key and just want 64 bit software to work with it. I want it to be legally correct but to a point, in my mind, it shouldn't matter if the software has to use a different product key to replace mine.
Ethan: at 10:26:43
Please note that product key and installation media must match with each other. Do you need me to check the type of your product key for you at this moment?
Craig Stenton: at 10:27:07
There is nothing on the box to say that it is 32 bit only. It does say "includes 32 bit dvd and information on obtaining 64 bit dvd", which does suggest that the product key is for 32 bit and 64 bit. there isn't any information to obtain 64 bit media
Ethan: at 10:31:25
Thanks for your information. In this case, I'd suggest you to contact our Windows Store support to see if they could provide you the retail installation media for you.
Ethan: at 10:31:25
Please click “Windows store support” on the bottom of the following to submit a support ticket for assistance:
Ethan: at 10:31:25
https://msdn.microsoft.com/subscriptions/windevcenter
Craig Stenton: at 10:32:46
Link just takes me to a page that says "We can't find any MSDN Subscriptions that are linked to your current Microsoft Account. If you have your subscription details (Subscriber ID or Benefit Access Number, name, and email) then you can activate your account
to start using your subscription benefits."
Ethan: at 10:33:21
Sorry, one more moment please.
Ethan: at 10:36:52
Still checking, one more moment please.
Craig Stenton: at 10:42:56
ok
Ethan: at 10:43:27
Sorry for the delay.
Ethan: at 10:43:27
Microsoft Store Hours of Operation:
Ethan: at 10:43:27
08:00-20:00 (GMT), Monday - Friday + 09:00-18:00 (GMT), Saturday
Ethan: at 10:43:27
Microsoft Store Sales and Customer Support.
Ethan: at 10:43:27
One of our representatives can process the order over the phone for you:
Ethan: at 10:43:27
0800 026 0329
Ethan: at 10:44:25
By the way, may I know where did you get this product key?
Craig Stenton: at 10:45:28
But surely I can just download the 64bit software? I don't want to have to wait for a disk to be delivered and I don't expect to have to pay for it if it's available on download.
Craig Stenton: at 10:46:19
The product key is on the Vista Business box. I can provide a photo if you wish
Ethan: at 10:46:31
Sorry, I mean could you please tell me where did you get your retail boxed version of Vista
Craig Stenton: at 10:47:36
Oh, sorry. I can't be certain. Possibly PC World - I used them quite a lot at that time.
Craig Stenton: at 10:49:05
I didn't buy it off ebay or other dubious sources if that is the purpose of your query. If I look back through our accounts I will be able to determine where it was purchased but that is a big task.
Ethan: at 10:53:16
I just double checked it for you, Windows Vista product keys should work for both 36 bit and 65 bit versions.
Ethan: at 10:54:11
**Windows Vista product keys should work for both 36 bit and 64 bit versions. Sorry for my typo.
Craig Stenton: at 10:55:17
I saw that but I know what you meant ;-> so, now that we know that my product key is valid for 64 bit, how do I download the 64bit media? It must be available.
Ethan: at 10:57:55
Just to confirm, your product key is for Windows Vista Business, right?
Craig Stenton: at 10:58:50
Yes, that is correct
Ethan: at 11:02:37
Could you please tell me if you have used before? Also please give me more information about activating the media downloaded from our TechNet site.
Ethan: at 11:02:55
**Could you please tell me if you have used the key before? Also please give me more information about activating the media downloaded from our TechNet site.
Ethan: at 11:04:30
Sorry, I just noticed that you said the key is unused. Then could you please tell me the error message when you activate with the key?
Craig Stenton: at 11:04:52
TBH, I'm not even sure I ever used it, but if I did, it wasn't for long. I purchased it so that I could support a couple of users with new Vista laptops but then downgraded them to XP due to problems (then) with Vista.
Craig Stenton: at 11:06:14
The problem that I get when trying to use my product key with the download from technet is "your product key cannot be validated. Review your product key and make sure that you have entered it correctly"
Ethan: at 11:06:48
In that case, could you please send the key to [email protected] with "To Ethan" included in the subject so that I could check for you if the key is still valid?
Ethan: at 11:09:17
Excuse me, Craig, are you still there?
Craig Stenton: at 11:11:10
yES, i AM STILL HERE. jUST SENDING THE EMAIL
Craig Stenton: at 11:11:31
Sorry, caps on for typing the product key in my email to you.
Ethan: at 11:12:02
It's okay, please take your time.
Craig Stenton: at 11:16:24
I have sent the email to you. I have included photos of the product key and the message.
Ethan: at 11:17:08
Thank you, please give me a moment to check it for you.
Craig Stenton: at 11:19:47
ok
Ethan: at 11:23:57
Still checking. Sorry for the delay.
Ethan: at 11:31:44
Thanks for your waiting. I have checked it for you, your product key is valid.
Craig Stenton: at 11:32:23
OK, but it doesn't work with the software downloaded from technet so what do we do about it?
Ethan: at 11:32:27
But I'm afraid it can be only used on one machine.
Craig Stenton: at 11:33:06
It will only be used on one machine.
Ethan: at 11:35:24
Our tool shows that the key has been used for activation before. Is that also on the same machine?
Craig Stenton: at 11:37:40
If it has been activated before then it would either have been my machine, in which case it hasn't been used for a very long time, or a 32 bit version on the machine that I am trying to use it on, which would have been in the past couple of days.
Craig Stenton: at 11:42:44
Are you still there Ethan?
Ethan: at 11:43:46
Sorry, I was taking to another customer online.
Ethan: at 11:44:54
Could you please provide me the file name of your installation media?
Ethan: at 11:47:34
Excuse me, Craig, are you still with me?
Craig Stenton: at 11:47:41
Yes I am
Craig Stenton: at 11:47:56
Do you mean the file that I downloaded from technet?
Ethan: at 11:48:09
Yes, you are correct.
Craig Stenton: at 11:48:40
en_windows_vista_x64_dvd_x12-40712.iso
Craig Stenton: at 11:49:12
I understand that this is not Vista Business, which I queried in my chats yesterday and I was told that it is the same media and should be ok
Ethan: at 11:52:13
Yes, the media contains Windows Vista and other editions. Normally, you may just claim a product key for Windows Vista Business, then you can install Windows Vista Business on your machine.
Craig Stenton: at 11:54:14
OK, so can you help me with that please?
Craig Stenton: at 11:54:42
It seems that I have the correct media, and my product key is valid so there shouldn't be any problems
Ethan: at 11:57:21
In that case you may call your regional Activation Center for further assistance. Please give me a moment to locate the contact information of the Activation Center in the UK.
Ethan: at 11:58:25
Thanks for your waiting. You may refer to the following KB article to learn how to contact Microsoft Product Activation Center for your region:
Ethan: at 11:58:25
http://support.microsoft.com/kb/950929
Ethan: at 11:58:25
(Or you may enter “SLUI 4” in “Run” to check out the number of every region in the world)
Ethan: at 12:01:04
Excuse me, have you received my above messages, Craig?
Craig Stenton: at 12:01:54
Yes I have
Ethan: at 12:02:41
Is there anything else I could do for you at this moment?
Craig Stenton: at 12:02:59
yes
Craig Stenton: at 12:03:12
just bear with me
Craig Stenton: at 12:05:06
I have done what you said and when I call the number it is an automated system that requires numbers from the activation wizard. I can't ebven install thde software to be able to get to that stage. I need my product keey to be made to wotk with the downloaded
media, or if it can't be made to work then I need to be supplied with a product key that will work
Ethan: at 12:07:18
Please give me a moment to check it for you.
Ethan: at 12:12:07
Thanks for your waiting. Have you tried the following steps?
Ethan: at 12:12:07
To activate Windows Vista over the telephone, follow these steps:
Ethan: at 12:12:07
1. Click the Start button, and then click Computer.
Ethan: at 12:12:07
2. Click System properties on the toolbar, and then click Click here to activate Windows now in the Windows activation area.
Ethan: at 12:12:07
User Access Control permission If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
Ethan: at 12:12:07
3.The Windows Activation Wizard starts.
Ethan: at 12:12:07
4.Click Use the automated telephone system in the Windows Activation Wizard.
Craig Stenton: at 12:13:04
but I can't install windows! During the install I am asked for the product key and it tells me that it is not valid and so I can't proceed.
Craig Stenton: at 12:14:16
I can't use the usual methods of activation because I cannot get an activation code. I can't use the activation wizard. I can't call the number because it requires an activation code.
Craig Stenton: at 12:14:35
I am completely stuck without somebody making it work.
Craig Stenton: at 12:16:01
We've established that everything is correct so what is the problem?
Ethan: at 12:18:45
Okay, then you may post this issue on our support forums for further assistance from our support engineers. One moment please, let me locate the entrance for you.
Craig Stenton: at 12:20:09
But surely it isn't a support issue. It is a product key issue.
Ethan: at 12:21:03
Windows Vista Activation
Ethan: at 12:21:03
http://social.technet.microsoft.com/Forums/windows/en-US/home?forum=itprovistasetup&filter=alltypes&sort=lastpostdesc
Ethan: at 12:24:45
But your product key is valid, and the media is correct. You may post your issue on the Windows Vista Activation forum to see if our support engineers have any solution on this issue.

Craig Stenton: at 12:13:04
but I can't install windows! During the install I am asked for the product key and it tells me that it is not valid and so I can't proceed.
Craig Stenton: at 12:14:16
I can't use the usual methods of activation because I cannot get an activation code. I can't use the activation wizard. I can't call the number because it requires an activation code.
Hi,
I'm a bit confused with this paragraph, as you said Vista already install on your computer, why did you say Windows can't be installed?
According to your description with your problem, it is Product edition and key are not match. Firstly of all, we must make sure the system you installed on your computer was
Windows Vista Business, not matter 32 or 64 bit.
Note: you can check current system edtion at System Properties.
After that, you can try to input your product key and activate your system for test.
If problem still presists, it would be better to provide the activation error message.
Roger Lu
TechNet Community Support

Can't activate iPhone because Apple ID is locked 'for security reasons', can't reset Apple ID because need iPhone to receive two-step activate code!

So here's an interesting one...
I have just updated iOS on my iPhone and it came up with the activation prompt. I entered my iCloud email and password and it told me that my account was disabled for security purposes.
This happens quite regularly as my iCloud account and I constantly get the account locked out as other people mistake it for their account.
The procedure to unlock my account is to visit iforgot.apple.com and select the 'Reset your password' option, enter my iCloud email address, two-step recovery key and then nominate my iPhone to receive a two-step authentication code.
The problem is my phone won't receive the authentication code because it needs activation! My iPad is also listed but also won't receive the authentication code, I expect because my Apple ID is disabled!
Having read the support article regarding what to do when you can't receive the two-step authentication code it says login to your apple id account and manage the list of devices! You what!? I can't login because my account is disabled.
It seems there is a complete design flaw here in that I can't activate my phone without unlocking my Apple ID and I can't unlock my Apple ID without activating my iPhone first!
I've spoken to Apple in the past about this and their response was to login and manage my devices and I pointed out that I could not login in because my account is disabled. They then basically said there is nothing I can do! Really? They won't unlock my Apple ID because they don't have the ability to do so.
If I'm not mistaken my iPhone is no longer fit for propose and if I can't sort this I will be visiting the Apple store and asking for a replacement as basically my device is bricked. I guess I will have to create a new Apple ID and will no longer be able to get to my email on the old account!?
Any folks on here has similar issues or any suggestions?
<Email Edited by Host>

I have something similar going on, but not exact. I basically have a useless phone here because I restored the phone but supposedly when my son's father redid the phone years ago for our son he added the phone to HIS apple id (on find my phoen supposedly) which he no longer has nor uses. I need said apple id and pass to finish restoring the phone. Maybe we should all get together and pile all our bricks in front of apple headquarters so no one can get out of the building and they have to stay there until they fix this. :-P

I just bought a new 4s and I can't activate using cellular connection, what is wrong?

I just bought a new 4s and I can't activate it using cellular connection and Wi-Fi and also I can't seem to get the iTunes connection option from my phone as well. What can I do?

posted in error.
Message was edited by: Radiation Mac

I forgot my iCloud and i can't activate my iphone 4 can i send you imei to remove my iCloud from my phone

I forgot my iCloud and i can't activate my iphone 4 can i send you imei to remove my iCloud from my phone

Iphone 4S
<Edited by Host>

MSI H67MA ED55 - Can't activate crossfire EDITED

Similar Messages

Maybe you are looking for