MSI H77MA-G43 - Windows XP, black screen with A3 code

Hi,
I've just bought mb MSI H77MA-G43 and samsung SSD830 series.
I have Windows XP.
I had to have set Sata mode to IDE beforee installing XP because Windows didn't see ssd.
Now it's ok but PC starts slowly. When I press power on button there is a black screen with A3 code and it takes some times(about 1-2 minutes) and next the Windows start normally.
What should I do to fix this issue?
Thanks for replies.

Quote from: Jack on 22-April-12, 20:22:25
If you want to install XP in AHCI mode you need to integrate the Intel AHCI drivers into an XP installation disk (with NLITE or XP ISO Driver) or load the drivers from a floppy disk during setup (Windows XP Setup only supports floppy drives/disks for that task, unfortunately).
I know that, I integrated drivers: "Intel Rapid Storage Technology Floppy Driver for 7x series" from that link http://www.msi.com/product/mb/H77MA-G43.html#/?div=Driver&os=XP%2032 but it didn't help. SSD was still undetected, so I change SATA mode to IDE to install XP.

Similar Messages

MSI Z87 GD65 - Hangs on black screen with 9C at bottom right

Pretty much what the title says, 'MSI Z87 GD65 - Hangs on black screen with 9C at bottom right'. Does anyone have any idea why it does this? It hangs for a while before eventually continuing with the start-up, this is most frustrating when I have an SSD and want a quick start-up. I have already looked it up in the manual to no luck. Help?

9C last for me like 1 to 3s, depending on the amount of USB devices attached. If I have only USB printer, keyboard, and mouse attached, it shows for roughly less than 1.5s.

MSI 7870 TF 2GD5/OC black screen with sound loop

hello,
Im getting the black screen with sound loop during the gaming. i have to shut down pc.
in win log is no info about problem, just that the win was not shuted down correctly..
no matter whats type of game, sometimes after 15 minutest sometimes after 4 hours.
no matter on card temperature.
tried reinstall windows, tested on all driver versions for 7870 from amd, but still same...
found an article about this
http://w w w .behardware.com/news/12705/black-screens-and-radeon-hd7870-a-solution.html
now the card is in RMA

Then ask MSI: >>How to contact MSI.<<
This is a Users-to-Users Forum

Windows 7 black screen with mouse in normal mode only

Windows 7 Ultimate goes to login screen on startup. After login to any account (which takes longer than normal - normal is pre-issue) the screen goes black and I'm left with a mouse and no keyboard input. I can boot into any mode except Normal
mode - Normal mode is the only mode where I cannot get my desktop.
I tried 'Last known good configuration' and that works until I reboot or shut down the computer, which then goes back to the black screen on startup and login. Also, when I do utilize the 'Last known good configuration' boot, I lose my network card
driver. That's not a problem because I just reinstall it and I can then connect.
I ran anti-virus with zero results. I ran Malwarebytes with zero results. I ran SUPERAntiSpyware with zero results (exempting cookies).
I have yet to see another post where someone can get into any mode except Normal mode, or keep their 'Last known good configuration' only once before it goes bad/corrupt on them. I don't know what else to look for. My registry shows Shell = Explorer.exe,
and any other registry checks mentioned in other posts come out valid (nothing to change/update).
What should I do short of reinstalling Windows?
George, Shorty

Hi,
Besides that, you also could try startup repair to fix this issue.
Startup Repair
http://windows.microsoft.com/en-IN/windows7/products/features/startup-repair
Karen Hu
TechNet Community Support

Windows 7 Black screen with cursor after boot camp partition

So I realise this is a problem that was plaguing people a few years back. So I'll go from the very start.
I've downloaded a copy of windows 7 professional 64bit from the Microsoft website. My optical/CD drive isn't working, so I've been unable to use it
to install windows. I decided I'd try booting from my USB. So I have the ISO file and formatted my USB and I've downloaded the latest drivers for boot camp assistant on my mac (version 5.0.4) I'm up to date with every update for my mac. Now, I do realise that Apple doesn't recommend using a USB to load windows, but I watched this http://www.youtube.com/watch?v=8z1gqw0ougo and it explained how to get the checkbox up when you're in boot camp so you can run from your USB.
My problem now, is that straight after I have partitioned my hard drive, it goes on to install windows but upon restarting it reaches "the black screen of death" with just the white cursor blinking. I've tried multiple times and keep getting the same result. I've even tried what Apple suggested and only have one USB device plugged in http://support.apple.com/kb/TS4536
The details for my mac are as follows:
Model Name:
iMac
Model Identifier:
iMac10,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
3.06 GHz
Number of Processors:
1
Total Number of Cores:
2
L2 Cache:
3 MB
Memory:
4 GB
Bus Speed:
1.07 GHz
Boot ROM Version:
IM101.00CC.B00
SMC Version (system):
1.53f13
Serial Number (system):
W800992A5PE
Hardware UUID:
A108E54E-3C53-5AF8-BFDF-2CF7ED567A74
and it's a late 2009 model.

I have solved this issue now but seem to have encountered another one. I solved the above issue simply by keep on trying time and time again, partitioning the hard drive and trying to install windows 7.
Anyway, I have encountered this error: windows setup could not apply the configuration set. The WINDOWS folder cannot be found.
Please help!

Windows Server 2008 black screen with mouse *PLEASE HELP*

Hello fellow techs,
I have been tearing my hair out for the past 12hrs on this issue.
About 3 weeks ago, one of our clients reported that they were experiencing
issues on the network so one of the staff went into the server room and noticed
the screen was black with only the cursor. As they couldn't reboot, they
decided to hold the power button to power it off. When they powered it back
up, it went passed the windows loading
splash screen, and again the screen is black with
the mouse pointer in the center of the screen.
I am diagnosing the server and find that at the black screen, I’m able to move
the cursor and beyond that nothing happened. I started in safe mode with the
exact same results.
I have been trying many different solutions from posts that I have found in
Google but no change.
From other machines you can type \\servername in
the run box and see the shared folders, as well as ping it.
This is a very urgent request as I need to have the Server back up and running
by tomorrow.
I am quiet willing to pay for phone support with anyone that can assist as soon
as possible. I am happy to transfer founds via Paypal.<o:p></o:p>
PLEASE HELP!

Hi,
I agree with sm, you should give us more details. Also you should use sfc /scannow
command to scans the integrity of all protected system files and repairs files with problems when possible. For more details, please refer to the following article.
Sfc
http://technet.microsoft.com/en-us/library/ff950779.aspx
Before going further, would you please let me know whether there were any changes on the affected server? Has windows update or any new device been added? Please also check your shadow copies.
The Windows Server black screen may be caused by them.
In addition, there are similar questions, please refer to.
Windows Server 2008 black screen
http://social.technet.microsoft.com/Forums/en-US/463b529b-26a6-4d5d-88f5-7d8b3460d165/black-screen-windows-2008-r2
Windows Server 2008 and the Black Screen of Waiting
http://projectdream.org/wordpress/2009/03/03/windows-server-2008-and-the-black-screen-of-waiting/
By a way, you also can be able to boot into last know good configuration to solve the trouble. You can refer to the following similar question that provide the detailed operations.
Windows Server 2008 black screen with only the mouse pointer showing
http://social.technet.microsoft.com/Forums/en-US/5c878af8-78f2-430d-9530-a0e5ad73ff03/windows-server-2008-black-screen-with-only-the-mouse-pointer-showing
Hope this helps.
Best regards,
Justin Gu

Windows xp install -- black screen with no cursor

I've seen a number of posts about Boot Camp installation problems involving a black screen with a blinking cursor, but my problem is simply with a black screen. On my MacBook Pro 15" Core 2 Duo (graphics card: ATY,RadeonX1600) I'm able to partition the HD, but then after I'm prompted in Boot Camp to insert the Windows XP install disk, the computer attempts to restart and install, but after a flash of grey screen, the screen goes totally black, and eventually the optical drive powers down (after whirring for a while) -- no cursor, no nothing. I've tried a number of suggestions I've seen elsewhere: my firmware seems up-to-date (at least that's what I'm told when I try to run both EFI and SMC firmware updates); the Windows XP is a brand-new, single-disk, SP2 install disk; I've tried holding down the option key upon reboot and selecting windows start-up. I've used Parallels with no problem under 10.4.X, but recently upgraded to 10.5.2, and thought I'd try a Boot Camp installation for better access to peripherals. Any suggestions?
Model Name: MacBook Pro 15"
Model Identifier: MacBookPro2,2
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP22.00A5.B07
SMC Version: 1.12f5

Hello to all and it wanted to request aid to them on this subject, days ago I acquired a Imac 24"2.4GHZ Aluminum (generation previous to the last ones sent for a month),then it is that I have years with my macbook pro and always I have used bootcamp since was beta in Tiger, so installation experience I believe that I have a little.
The problem is that in it is new machine I have partition my disc with the assistant without no problem, but when it is going to install Windows XP or Vista (the 2 I have them original) and boot the machine, it remains in gray screen and no nothing happens, reason why boot with option pressed and they leave systems both to me, followed this I select Windows and it is hoisted in the screen that nor the leader of the mouse moves.
I have made the procedure as 10 times and proven with different sizes from partition (with its respective disc repair with the DVD of Leopard and the disc assistant) and nothing.
Finally uses WinClone in my macbook pro and clone my partition of Vista Windows, recovers it in the Imac without no problem and it appears to me in startup but the same, I select Windows and there it remains. Fiirmware of the updated machine this and I am in OSX 10.5.3. I have proven everything until changes to the memories and nothing. Them request if somebody has had east problem and to most erudite of the forum I request aid to them to see if they can give me.
Beforehand a million thanks to all,

Using Firefox to access facebook chat Button or online friiend chat button generates a Black screen with CANNOT LOAD IMAGES and no chat window opens.

This does not happen in other browsers and it happens on a variety of computers I have access to and would seem to be a common problem but I can find no identical cases in my searches of
Firefox , Facebook or windows help or Google search. My home machine is only a P2 with WINXPCORP but works fine and I have done all updates but still have this continuing problem every time I try to use Firefox
to access Facebook chat but it does not happen with IE or chrome
The response to clicking on chat button or friend chat is a black screen with small center square box with blue title bar that says
'' VIEW IMAGE FULL SCREEN - (42) FACEBOOK X""
center of box is ""! "" mark in yellow triangle and wording
"" CANNOT LOAD IMAGES ''' OK
clicking on OK returns to facebook page but no chat opens.
Some times |VERY RARLEY if as the page loades you click on
chat button with 1/2 second of it appearing chat will open.

Hi,
Please also see [https://support.mozilla.org/en-US/kb/Problems%20using%20Facebook%20in%20Firefox this.]

My MacBook Pro just turned itself off while installing Windows 7. It has now got a black screen with a white flashing bar in the top left corner...what can I do?

I was just installing windows 7 onto my MacBook Pro. I selected to have 200GB for Windows and the rest leave for Mac.
I clicked install and the bar filled up as it should do. However, once the install had completed, my MacBook turned itself off. I assumed this was normal. Now, my MacBook has a black screen with a white flashing underscore in the top left corner.
What is wrong and what should I do?

Hold down the Option key when starting up then on the sceen that comes up select Mac OS X to boot from.
The Win 7 install didn't go well and is hung in some way. You should use boot camp assistant to remove the win partition and start over.
Make sure you are using a Retail version of Win 7. A Branded OEM version, like ones from Dell and HP, will NOT work to install Windows 7 on your Mac.

Windows XP won't install. Black screen with cursor!

Ok, so I originally partitioned the HD using 'Boot Camp Assistant". I had no problems installing Windows. When I plugged in the Mac OS X install dvd to install the drivers it always crashed. so, I went back into 'Boot Camp Assistant', delete and repartitioned the HD. Now when I try to reinstall Windows a black screen pops up with a blinking, white cursor at the upper-left-hand corner of the screen.
I've tried:
1. Repartitioning the HDD at least 5 times.
2. Restarting and holding down option and selecting the windows dvd.
3. Resetting a bunch of times.
4. Ejecting and inserting windows cd over and over again.
5. Renaming partitions.
6. Hitting space bar continuously upon restart.
Are there any remedies for this?
Also, after partitioning, even without installing Windows... when resetting and holding down the 'option' button.... should it still show one partition or both?
Message was edited by: enrique_david

Well, I finally got it to work! What I did was turn off the computer, unplugged the cord from the back of the computer (not from the outlet), let it sit for 30 seconds, plug it back in and restart your computer. I got the tip from this article http://support.apple.com/kb/TA24192. Make sure you click on 'Reset the NVRAM'.

Windows Vista and Windows 7 Only Boots to a black screen with a mouse cursor

Windows Vista and Windows 7 Only Boots to a black screen with a mouse cursor after I installed Mcafee Internet Security.
Hi I installed 1of 3 McAfee Internet Security protections on my HP laptop a few weeks ago with no issues. I Have a Dell XPS 420 desk top with Windows Vista operating
system, it’s never had any issues, until 2 nights ago I installed McAfee Internet Security (detected incompatible files and will remove) pc now only boots up to a black screen with a mouse cursor, it will show the windows logo and a hash symbol floating around
the screen. Now 2 weeks ago I installed the same program on my Dell all in one desk top with Windows 7, the same issue happen but that pc has no screen activity, I tried a back to factory reboot on this one, still black screen.

Hi,
Please install the compatible version of McAfee Internet Security:
http://home.mcafee.com/store/internet-security
if you have startup issue, you can boot into Safe Mode to uninstall the problematic software to go back into Windows.
Alex Zhao
TechNet Community Support

Windows 8.1 update - S440 ThinkPad black screen with flickering cursor.

Hello,
Sorry if this is answered elsewhere.
I have an S440. I've had it for one week. Two days ago I downloaded the Windows 8.1 update from the store. Since then, when I start up the computer, it doesn't even taken me to the 'sign in' screen. There's just a black screen. When I move the cursor, it briefly appears, flickers, then disappears again.
I understand this is an issue with the graphics drivers. So I ran Windows in safemode and disabled Intel R HD Graphics family and AMD Radeon HD 8600 series graphics drivers.
This, unfortunately, hasn't fixed the problem. It still boots to a black screen with an occasionally flickering cursor. I'm currently running in safemode.
Any advice?
Thanks,
Alex
Solved!
Go to Solution.

Hi
I also have an S440 and have tried 3 times to update laptop without success including updating all drivers and updates inc those from Lenovo.
Is there a fix for this? Is this an AMD issue?
My laptop is also very new and cannot believe it is incompatible with windows 8.1.
Tried the compatibility checker with Windows 8.1and it didn't report any problems.http://windows.microsoft.com/en-gb/windows-8/upgrade-assistant-download-online-faq
Is there anything that can be done to get this working?
Paul

Windows 7 bootcamp show black screen with a small white bar

I just upgraded my iMac mid 2011 21.5" with a crucial m4 SSD. The SSD is plugged in the disk 1 DATA port and on the SSD power on the motherboard. I fully installed Windows 7 with all the driver and updates. My mac is upgraded with the lastest update. The crucial m4 firmware is 009. I installed no driver for the SSD.
The problem is that when I start my bootcamp it only show a black screen with a small white bar on the corner. I waited about 5 minutes before to close the computer manually. The only way my bootcamp work is when I put my Windows 7 DVD in the reader for the startup.

Sometimes windows installation will install a WDM driver for ati or nvidia. It causes the screen to go black altho ugh everything else is running in the background. I found that using an external monitor will allow you to see the screen so that you can install the lastest bootcamp drivers. After the drivers are installed the screen comes back. I reinstalled windows 3 times and tried all other solutions including repairing the hard drive in disk utility.

Boot Camp: Early 2011 MacBook Pro boots to black screen with blinking cursor after windows 7 installation.

I bought and downloaded the windows 7 ultimate edition 64 bit iso, then proceeded to perform a correct burn to a DVD one at the slowest speed and one at the fastest. all went well. so I open Boot Camp assistant and follow the instructions to the letter, downloaded the driver support to the flash drive. partitioned my drive with more than enough room 150 gb. its starts its install. I get through everything seamlessly where I put in my info all with the exception of my activation code. yet it still continues to finalize the install and does another restart. boots back up to either A. black screen saying press any key to boot to my install disk. B. if I take it out just a white curser. also I read it may be because I had the flash drive in while I was trying to boot so I removed it as well, same result. any input would be much appreciated.

Boot Camp- Windows installation boots to black screen with blinking cursor.

Windows 7 on Boot Camp stuck at black screen with blinking cursor... starts up fine in Parallels desktop

Hi,
Recently my dad's Windows 7 (Ultimate 64-bit) on his Mac Pro has stopped working. It gets stuck at a black screen with a blinking cursor. I've waited at least five minutes and it doesn't do anything, I have to power it off.
However it starts up perfectly fine and intact in Parallels desktop. If I insert the original installation DVD and boot from the Disc that says 'Windows' it will boot into the partition and work fine, unless I press a key to boot from the DVD.
I find both these things to be strange. The partition is backed up, which is fine, but I'd rather not have to re-install it if possible.
I have booted from the DVD and tried to repair the disk. It said it found a problem with something related to startup and that it needed to restart to repair it. I clicked yes, and then held alt/opt and (I think wrongly) booted back into the disc rather than the Windows partition. However it now says that it can't detect any problems.
In the repair my computer section when booting from the DVD, it detects the OS as Windows Vista Business. I followed these steps I found online:
Fixed! Peroblem was I think using OEM, which Bootcamp advise against using... they advise to use retail only. Fixed like this:
1. Put the Windows 7 installation disc in the disc drive, and then start your computer.
2. Hold down Option key till all available disks are displayed and select DVD. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then 4. click Next.
5. Click Repair your computer.
6. Click the operating system that you want to repair, and then click Next.
7.In the System Recovery Options dialog box, click Command Prompt.
Type (these commands are safe)
Code: Bootrec.exe /FixMbr
Code: Bootrec.exe /FixBoot
Code: Bootrec.exe /RebuildBcd
*Press ENTER after each command.*
*Restart your computer.*
Done. Rockin'
FixMbr was successful, as was FixBoot. However RebuildBcd reported that it found no Windows installations.
Does anyone know what could be wrong here? I should note that recently I removed the drive Windows 7 is installed on and put it back in. Also Windows Updates probably have been done by my dad. Not sure if they could be the problem.

Cult, welcome to the forum.
It sounds like you have a failing power supply unit (PSU). This will cause the symptoms that you describe. If the computer isn't getting enough power, it can cause numerous problems. You can try disconnecting any unnecessary components to see if it will boot. Here is a guide to help you troubleshoot the problem.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

MSI H77MA-G43 - Windows XP, black screen with A3 code

Similar Messages

Maybe you are looking for