MSI has a serious KVM switch problem.
On the K8N the iogear USB KVM switches DO NOT WORK. I have two computers.. one with an asus board and one with an MSI. Works fine on the asus board. I did a search and noticed another guy was having the same problems. So its a error that MSI needs to fix. Have they fixed it yet? If not it really needs to be looked into.
Quote
Originally posted by suaZman
Quote
Originally posted by Sharkbait
I should mention that the Linkskey 2-Port Slim Desktop KVM Switch is a PS2 KVM, not USB.
Sharkbait
Well the PS/2 type Iogear works fine. It is just the USB version that does not with this board. That sux because I need the USB version so it will recognize my MX 500 mouse. If you place an adaptor on the PS/2 version it just sees it as a standard mouse thus not enabling the other buttons.
The belkin USB 2 port KVM works fine but the damn thing has no hot key switching and it is slow.
Could you not use a USB > PS2 adapter for your mouse and run your mouse off PS2 and use a PS2 KVM? I use a MX700 mouse on the PS2 port and with mouseware installed, all my extra (5) buttons work fine
Similar Messages
-
KVM switchs, any problems with MSI boards???
Hi Everybody!!
X-Abit fan here, I have a 2 port Belkin DVI KVM switch. I had trouble with Asus and kvm's so I'm asking ahead of time. I built a couple of MSI boxes in the P3 days and had good experience. I'm glad to here Quality is back as a priority at MSI. Congrats on the #1 spot on Tomshardware 965P round up.
Hope the forums here as lively as the Abit one is.
Thanks for the help??some KVM switch has incompatibility issue with some boards. What you have is just by luck they both work together!
-
Problems Usingt External VGA Monitor Through KVM Switch
I have my ThinkPad x201 connected to a KVM switch along with three other machines. The KVM is attached to a monitor with a resolution of 1920x1200.
Does the ThinkPad have to be rebooted with the KVM switch attached to the VGA port and with the switch set to the THnkPad?
I plug in the VGA connector with the KVM switch set to the ThinkPad. I then press fn-F7 and get four choses: Computer Only, Duplicate, Extend and Projector Only. I only want to display on the external monitor but Projector Only does not seem to be the correct choice although it does switch to the monitor it also puts up a message box saying the projector was not found. When I go to change the resolution I am offen limited to 1680 x 1050. Other times I can set it to 1900 x 1200.
When I switch the KVM to another machine I hear a tone from the ThinkPad that indicates something has changed. Then when I switch the KVM back to the ThinkPad I briefly see the display on the monitor at a lower resolution and then the monitor goes dark and the ThinkPad screen lights up.
I have also tried Extend mode with the output set to go only to the monitor. Again, if I switch the KVM away from the ThinkPad I hear a tone from the ThinkPad. When I switch the KVM back to the ThinkPad I again briefly see the display on the monitor at a lower resoulution and the the monitor goes blank and the ThinkPad's display lights up.
Is there a way around this behavior that will stop the ThinkPad from switching its output or can an external monitor only be used if it is directly connected to the ThinkPad?I am also having the same problem with a ThinkPad T420s and a Trendnet TK-409 KVM. This KVM has worked for so many other laptops and desktops, I find it difficult to believe the ThinkPad would not work with a KVM - particularly this one. Any suggestions and help would be highly appreciated. Thank you.
-
my computer has some serious problems, my iphoto only shows only shows thumb size pics when I try to open them, i tried to rebuild my files from folders that had the pics in them. originally all the photos had a large delta with a question mark. also I can't back up the library file because its not there. I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place. I also lost my Idvd file, only have broken chain showing.
Details please
What version of iPhoto and of the OS?
i tried to rebuild my files from folders that had the pics in them.
Exactly what did you do and how did you do it? this ay be the cause of your issue but without details we can n=ony guess
my iphoto only shows only shows thumb size pics when I try to open them,
where do you see htis? In the iPhoto window? what does "try to pen them" exactly mean?
originally all the photos had a large delta with a question mark.
Ok - this usually has a simple solution - do you still have a copy of the library that has this problem?
also I can't back up the library file because its not there.
This makes no sense at all - all of your previous statements indicate that you do have an iPhoto library but have some problems with it
By default your iPHoto library is located in your Pictures folder and is named iPhtoo library - if tha tis not the case the you have moved or renamed it and only you know what you did until you tell us the details
I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place.
Again unless you actually share what and how you are doing thing but continue to simply state abstract problems it is no possible to assist you - details on using Time Machine are here -- http://support.apple.com/kb/HT1427?viewlocale=en_US&locale=en_US -- and -- http://pondini.org/TM/FAQ.html ---
I also lost my Idvd file, only have broken chain showing.
This would be better addressed in the iDVD forum - but again unlesss yu share detailed information no one can assist
LN -
Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
Any way to fix it?only $99, i thought it was closer to $175.
-
I bought an iPhone 5 around fifteen days back and it has already started to give problem with the on/off button. I have to press it five six times to switch it on or off. I am so frustrated by the fact that if I bring it to the service centre, I am going to get a refurbished phone in place of my brand new phone which I just bought. The idea of a used phone repulses me. Any solutions ?
sumeshdua wrote:
The idea of a used phone repulses me.
Why? Your current phone is used... it has been since the instant it was removed from the shrink wrap and turned on.
sumeshdua wrote:
Any solutions ?
Live with the phone as is.
Take the device to Apple for evaluation... it may not need replacement.
Even if it does, neither you or the Apple tech should be able to tell if the replacement is new or refurbished. -
Problem with iBook G4 and Belkin KVM switch
I purchased an iBook G4 a few months ago, and then recently got a Belkin KVM switch to share a monitor with my Windows XP computer. The switch is powered over USB (so uses a USB mouse and keyboard). It worked great up until recently. Now, whenever I switch over to the iBook, it shows the OSX desktop, and you can hear the USB devices (mouse and keyboard) "unplug" from the XP box (familiar USB sound on XP). Then, after about 2 or 3 seconds, it goes back to the XP display and re-enables the USB mouse and keyboard in XP. The only thing I can figure is that the KVM switch is not getting any or enough power from the iBook USB to let it know it's there. I should mention that the only thing I did different in between the time it worked and started to not work was plug in an M-Audio Fasttrack USB guitar device to the iBook at the same time. Both the KVM and Fasttrack worked together only once. Now, the KVM won't work, both alone and with the Fasttrack. I have used the Fasttrack before and it worked just fine, but this was the first time I used it with the KVM together.
I have seen a few posts on this general topic, but none that I saw had any possible solutions. Could it be an OSX update that broke this somehow? Thanks.
iBook G4 Mac OS X (10.4.4)Well, I managed to figure out the problem. I called Belkin, and they suggested unplugging everything and then plugging it back in. And, wouldn't you know, it worked. I'm not sure why, but I'm not complaining. So, if anyone else runs into this same issue, try this.
-
Xorg + KVM switch = Flickering and artifacts
Dear all,
I recently bought two small kvm switches produced by Digitus.
They are working fine when I use my Windows box but sadly it's another story with my Arch laptop. When I don't use the KVM switches my two displays a rendered fine. However when I plug the KVM switches I get some kind of flickering red/green/blue lines/pixels on the display, It's a bit tricky to describe so here is a photo (Here it is some green dot, but that might vary) :
As you might think, I am trying to get rid of those artifacts.
A couple of information regarding my setup :
KVM switches
Monitor
On my laptop the graphic adapter is an intel hd 4000
dna@DNA-NOTEBOOK ~ % sudo lspci -vvv | grep -A 20 "00:02.0"
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 1815
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00018 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915
My intel driver configuration (I have already tested with some other options as you might see. I'm not a graphical guru so please bear with me if those options are irellevant):
Note that I don't have any xorg.conf nor a configuration files for the monitors.
dna@DNA-NOTEBOOK ~ % cat /etc/X11/xorg.conf.d/20-intel.conf
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "sna"
# Option "TearFree" "true"
# Option "DRI" "false"
# Option "AccelMethod" "uxa"
EndSection
xrandr query (HDMI1 is using the KVM switch and HDMI2 is not, they are using the exact same mode)
dna@DNA-NOTEBOOK ~ % xrandr -q
Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 32767 x 32767
LVDS1 connected 1366x768+1920+0 (normal left inverted right x axis y axis) 256mm x 144mm
1366x768 60.0*+ 40.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm
1920x1080 60.0*+
1680x1050 59.9
1680x945 60.0
1400x1050 74.9 59.9
1600x900 60.0
1280x1024 75.0 60.0
1440x900 75.0 59.9
1280x960 60.0
1366x768 60.0
1360x768 60.0
1280x800 74.9 59.9
1152x864 75.0
1280x768 74.9 60.0
1024x768 75.0 70.1 60.0
1024x576 60.0
800x600 72.2 75.0 60.3 56.2
848x480 60.0
640x480 75.0 72.8 66.7 60.0
720x400 70.1
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm
1920x1080 60.0*+
1680x1050 59.9
1680x945 60.0
1400x1050 74.9 59.9
1600x900 60.0
1280x1024 75.0 60.0
1440x900 75.0 59.9
1280x960 60.0
1366x768 60.0
1360x768 60.0
1280x800 74.9 59.9
1152x864 75.0
1280x768 74.9 60.0
1024x768 75.0 70.1 60.0
1024x576 60.0
800x600 72.2 75.0 60.3 56.2
848x480 60.0
640x480 75.0 72.8 66.7 60.0
720x400 70.1
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
My Xorg log
[ 12802.582]
X.Org X Server 1.13.3
Release Date: 2013-03-07
[ 12802.582] X Protocol Version 11, Revision 0
[ 12802.582] Build Operating System: Linux 3.8.2-1-ARCH x86_64
[ 12802.582] Current Operating System: Linux DNA-NOTEBOOK 3.7.10-1-ARCH #1 SMP PREEMPT Thu Feb 28 09:50:17 CET 2013 x86_64
[ 12802.582] Kernel command line: root=/dev/sda2 ro elevator=noop initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 12802.582] Build Date: 09 March 2013 08:45:37AM
[ 12802.582]
[ 12802.582] Current version of pixman: 0.28.2
[ 12802.583] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12802.583] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12802.583] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 11 10:58:50 2013
[ 12802.583] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 12802.583] (==) No Layout section. Using the first Screen section.
[ 12802.583] (==) No screen section available. Using defaults.
[ 12802.583] (**) |-->Screen "Default Screen Section" (0)
[ 12802.583] (**) | |-->Monitor "<default monitor>"
[ 12802.583] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 12802.583] (**) | |-->Device "Intel Graphics"
[ 12802.583] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 12802.583] (==) Automatically adding devices
[ 12802.583] (==) Automatically enabling devices
[ 12802.583] (==) Automatically adding GPU devices
[ 12802.583] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 12802.583] Entry deleted from font path.
[ 12802.583] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 12802.583] Entry deleted from font path.
[ 12802.583] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 12802.583] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 12802.583] Entry deleted from font path.
[ 12802.583] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 12802.583] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 12802.583] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12802.583] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12802.583] (II) Loader magic: 0x7fcc20
[ 12802.583] (II) Module ABI versions:
[ 12802.583] X.Org ANSI C Emulation: 0.4
[ 12802.583] X.Org Video Driver: 13.1
[ 12802.583] X.Org XInput driver : 18.0
[ 12802.583] X.Org Server Extension : 7.0
[ 12802.583] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 12802.584] (--) PCI:*(0:0:2:0) 8086:0166:103c:1815 rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00002000/64
[ 12802.584] Initializing built-in extension Generic Event Extension
[ 12802.584] Initializing built-in extension SHAPE
[ 12802.584] Initializing built-in extension MIT-SHM
[ 12802.585] Initializing built-in extension XInputExtension
[ 12802.585] Initializing built-in extension XTEST
[ 12802.585] Initializing built-in extension BIG-REQUESTS
[ 12802.585] Initializing built-in extension SYNC
[ 12802.585] Initializing built-in extension XKEYBOARD
[ 12802.585] Initializing built-in extension XC-MISC
[ 12802.585] Initializing built-in extension SECURITY
[ 12802.585] Initializing built-in extension XINERAMA
[ 12802.585] Initializing built-in extension XFIXES
[ 12802.585] Initializing built-in extension RENDER
[ 12802.585] Initializing built-in extension RANDR
[ 12802.585] Initializing built-in extension COMPOSITE
[ 12802.585] Initializing built-in extension DAMAGE
[ 12802.585] Initializing built-in extension MIT-SCREEN-SAVER
[ 12802.585] Initializing built-in extension DOUBLE-BUFFER
[ 12802.585] Initializing built-in extension RECORD
[ 12802.585] Initializing built-in extension DPMS
[ 12802.585] Initializing built-in extension X-Resource
[ 12802.585] Initializing built-in extension XVideo
[ 12802.585] Initializing built-in extension XVideo-MotionCompensation
[ 12802.585] Initializing built-in extension XFree86-VidModeExtension
[ 12802.586] Initializing built-in extension XFree86-DGA
[ 12802.586] Initializing built-in extension XFree86-DRI
[ 12802.587] Initializing built-in extension DRI2
[ 12802.587] (II) LoadModule: "glx"
[ 12802.587] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12802.587] (II) Module glx: vendor="X.Org Foundation"
[ 12802.587] compiled for 1.13.3, module version = 1.0.0
[ 12802.587] ABI class: X.Org Server Extension, version 7.0
[ 12802.587] (==) AIGLX enabled
[ 12802.588] Loading extension GLX
[ 12802.588] (II) LoadModule: "intel"
[ 12802.588] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 12802.588] (II) Module intel: vendor="X.Org Foundation"
[ 12802.588] compiled for 1.13.2.901, module version = 2.21.3
[ 12802.588] Module class: X.Org Video Driver
[ 12802.588] ABI class: X.Org Video Driver, version 13.1
[ 12802.588] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 12802.589] (++) using VT number 1
[ 12802.589] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 12802.589] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 12802.589] (==) intel(0): RGB weight 888
[ 12802.589] (==) intel(0): Default visual is TrueColor
[ 12802.589] (**) intel(0): Option "AccelMethod" "sna"
[ 12802.589] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 12802.589] (**) intel(0): Framebuffer tiled
[ 12802.589] (**) intel(0): Pixmaps tiled
[ 12802.589] (**) intel(0): "Tear free" disabled
[ 12802.589] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 12802.589] (II) intel(0): Output LVDS1 has no monitor section
[ 12802.589] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 12802.602] (II) intel(0): Output VGA1 has no monitor section
[ 12802.603] (II) intel(0): Output HDMI1 has no monitor section
[ 12802.645] (II) intel(0): Output DP1 has no monitor section
[ 12802.898] (II) intel(0): Output HDMI2 has no monitor section
[ 12802.912] (II) intel(0): Output HDMI3 has no monitor section
[ 12802.952] (II) intel(0): Output DP2 has no monitor section
[ 12802.992] (II) intel(0): Output DP3 has no monitor section
[ 12802.992] (II) intel(0): EDID for output LVDS1
[ 12802.992] (II) intel(0): Manufacturer: SEC Model: 3953 Serial#: 0
[ 12802.992] (II) intel(0): Year: 2012 Week: 0
[ 12802.992] (II) intel(0): EDID Version: 1.4
[ 12802.992] (II) intel(0): Digital Display Input
[ 12802.992] (II) intel(0): 6 bits per channel
[ 12802.992] (II) intel(0): Digital interface is undefined
[ 12802.992] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 14
[ 12802.992] (II) intel(0): Gamma: 2.20
[ 12802.992] (II) intel(0): No DPMS capabilities specified
[ 12802.992] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 12802.992] (II) intel(0): First detailed timing is preferred mode
[ 12802.992] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 12802.992] (II) intel(0): redX: 0.576 redY: 0.349 greenX: 0.336 greenY: 0.556
[ 12802.992] (II) intel(0): blueX: 0.159 blueY: 0.115 whiteX: 0.313 whiteY: 0.329
[ 12802.992] (II) intel(0): Manufacturer's mask: 0
[ 12802.992] (II) intel(0): Supported detailed timing:
[ 12802.992] (II) intel(0): clock: 76.9 MHz Image Size: 256 x 144 mm
[ 12802.992] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1644 h_border: 0
[ 12802.992] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
[ 12802.992] (II) intel(0): Supported detailed timing:
[ 12802.992] (II) intel(0): clock: 51.3 MHz Image Size: 256 x 144 mm
[ 12802.992] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1644 h_border: 0
[ 12802.992] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
[ 12802.992] (II) intel(0): Unknown vendor-specific block 2
[ 12802.992] (II) intel(0): EDID (in hex):
[ 12802.992] (II) intel(0): 00ffffffffffff004ca3533900000000
[ 12802.992] (II) intel(0): 00160104901a0e780a91e59359568e28
[ 12802.992] (II) intel(0): 1d505400000001010101010101010101
[ 12802.992] (II) intel(0): 0101010101010e1e561651000c303020
[ 12802.992] (II) intel(0): 25000090100000190914561651000c30
[ 12802.992] (II) intel(0): 30202500009010000019000000000000
[ 12802.992] (II) intel(0): 00000000000000000000000000000002
[ 12802.992] (II) intel(0): 000c4cff0a3c64100f196400000000c1
[ 12802.992] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 12802.992] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 12802.992] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 12802.992] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 12802.992] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 12802.992] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 12802.992] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 12802.992] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 12802.992] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 12802.992] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 12802.992] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 12802.992] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 12802.992] (II) intel(0): Printing probed modes for output LVDS1
[ 12802.992] (II) intel(0): Modeline "1366x768"x60.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 12802.992] (II) intel(0): Modeline "1366x768"x40.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 12802.992] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 12802.992] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 12802.992] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 12802.992] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 12803.005] (II) intel(0): EDID for output VGA1
[ 12803.006] (II) intel(0): EDID for output HDMI1
[ 12803.048] (II) intel(0): EDID for output DP1
[ 12803.302] (II) intel(0): EDID for output HDMI2
[ 12803.302] (II) intel(0): Manufacturer: ACR Model: 198 Serial#: 294659115
[ 12803.302] (II) intel(0): Year: 2011 Week: 19
[ 12803.302] (II) intel(0): EDID Version: 1.3
[ 12803.302] (II) intel(0): Digital Display Input
[ 12803.302] (II) intel(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 12803.302] (II) intel(0): Gamma: 2.20
[ 12803.302] (II) intel(0): DPMS capabilities: Off
[ 12803.302] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 12803.302] (II) intel(0): First detailed timing is preferred mode
[ 12803.302] (II) intel(0): redX: 0.631 redY: 0.349 greenX: 0.341 greenY: 0.622
[ 12803.302] (II) intel(0): blueX: 0.152 blueY: 0.058 whiteX: 0.313 whiteY: 0.329
[ 12803.302] (II) intel(0): Supported established timings:
[ 12803.302] (II) intel(0): 720x400@70Hz
[ 12803.302] (II) intel(0): 640x480@60Hz
[ 12803.302] (II) intel(0): 640x480@67Hz
[ 12803.302] (II) intel(0): 800x600@56Hz
[ 12803.302] (II) intel(0): 800x600@60Hz
[ 12803.302] (II) intel(0): 1024x768@60Hz
[ 12803.302] (II) intel(0): 1024x768@70Hz
[ 12803.302] (II) intel(0): Manufacturer's mask: 0
[ 12803.302] (II) intel(0): Supported standard timings:
[ 12803.302] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 12803.302] (II) intel(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 12803.302] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 12803.302] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 12803.302] (II) intel(0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 12803.302] (II) intel(0): Supported detailed timing:
[ 12803.302] (II) intel(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 12803.302] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 12803.302] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 12803.302] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 12803.302] (II) intel(0): Monitor name: Acer P226HQL
[ 12803.302] (II) intel(0): Serial No: LNJ0W0014320
[ 12803.302] (II) intel(0): EDID (in hex):
[ 12803.302] (II) intel(0): 00ffffffffffff00047298012b249011
[ 12803.302] (II) intel(0): 1315010380301b782a9535a159579f27
[ 12803.302] (II) intel(0): 0e5054b30c00714f810081809500d1c0
[ 12803.302] (II) intel(0): 010101010101023a801871382d40582c
[ 12803.302] (II) intel(0): 4500dd0c1100001e000000fd00384b1e
[ 12803.302] (II) intel(0): 5311000a202020202020000000fc0041
[ 12803.302] (II) intel(0): 636572205032323648514c0a000000ff
[ 12803.302] (II) intel(0): 004c4e4a3057303031343332300a00d9
[ 12803.302] (II) intel(0): Printing probed modes for output HDMI2
[ 12803.302] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 12803.302] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 12803.302] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
[ 12803.302] (II) intel(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)
[ 12803.302] (II) intel(0): Modeline "1400x1050"x59.9 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[ 12803.302] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 12803.302] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 12803.302] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 12803.302] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 12803.302] (II) intel(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 12803.302] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 12803.302] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
[ 12803.302] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 12803.302] (II) intel(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 12803.302] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 12803.302] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 12803.302] (II) intel(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
[ 12803.302] (II) intel(0): Modeline "1280x768"x60.0 68.25 1280 1328 1360 1440 768 771 778 790 +hsync -vsync (47.4 kHz e)
[ 12803.302] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 12803.302] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 12803.302] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 12803.302] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 12803.302] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 12803.302] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 12803.302] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 12803.302] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 12803.302] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 12803.302] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 12803.302] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 12803.302] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 12803.302] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 12803.302] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 12803.315] (II) intel(0): EDID for output HDMI3
[ 12803.355] (II) intel(0): EDID for output DP2
[ 12803.395] (II) intel(0): EDID for output DP3
[ 12803.395] (II) intel(0): Output LVDS1 connected
[ 12803.395] (II) intel(0): Output VGA1 disconnected
[ 12803.395] (II) intel(0): Output HDMI1 disconnected
[ 12803.395] (II) intel(0): Output DP1 disconnected
[ 12803.395] (II) intel(0): Output HDMI2 connected
[ 12803.395] (II) intel(0): Output HDMI3 disconnected
[ 12803.395] (II) intel(0): Output DP2 disconnected
[ 12803.395] (II) intel(0): Output DP3 disconnected
[ 12803.395] (II) intel(0): Using exact sizes for initial modes
[ 12803.395] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 12803.395] (II) intel(0): Output HDMI2 using initial mode 1366x768
[ 12803.395] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 12803.395] (==) intel(0): DPI set to (96, 96)
[ 12803.395] (II) Loading sub module "dri2"
[ 12803.395] (II) LoadModule: "dri2"
[ 12803.395] (II) Module "dri2" already built-in
[ 12803.395] (==) Depth 24 pixmap format is 32 bpp
[ 12803.395] (II) intel(0): SNA initialized with IvyBridge backend
[ 12803.395] (==) intel(0): Backing store disabled
[ 12803.395] (==) intel(0): Silken mouse enabled
[ 12803.395] (II) intel(0): HW Cursor enabled
[ 12803.395] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 12803.396] (==) intel(0): DPMS enabled
[ 12803.396] (II) intel(0): [DRI2] Setup complete
[ 12803.396] (II) intel(0): [DRI2] DRI driver: i965
[ 12803.396] (II) intel(0): direct rendering: DRI2 Enabled
[ 12803.397] (==) intel(0): hotplug detection: "enabled"
[ 12803.397] (--) RandR disabled
[ 12803.406] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 12803.406] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 12803.406] (II) AIGLX: enabled GLX_ARB_create_context
[ 12803.406] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 12803.406] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 12803.406] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 12803.406] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 12803.406] (II) AIGLX: Loaded and initialized i965
[ 12803.406] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 12803.406] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[ 12803.465] (II) intel(0): switch to mode 1366x768 on crtc 5 (pipe 1)
[ 12803.645] (II) intel(0): Setting screen physical size to 361 x 203
[ 12803.676] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 12803.676] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 12803.676] (II) LoadModule: "evdev"
[ 12803.676] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 12803.676] (II) Module evdev: vendor="X.Org Foundation"
[ 12803.676] compiled for 1.13.0, module version = 2.7.3
[ 12803.676] Module class: X.Org XInput Driver
[ 12803.676] ABI class: X.Org XInput driver, version 18.0
[ 12803.676] (II) Using input driver 'evdev' for 'Power Button'
[ 12803.676] (**) Power Button: always reports core events
[ 12803.676] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 12803.677] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 12803.677] (--) evdev: Power Button: Found keys
[ 12803.677] (II) evdev: Power Button: Configuring as keyboard
[ 12803.677] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 12803.677] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 12803.677] (**) Option "xkb_rules" "evdev"
[ 12803.677] (**) Option "xkb_model" "evdev"
[ 12803.677] (**) Option "xkb_layout" "us"
[ 12803.699] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 12803.699] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 12803.699] (II) Using input driver 'evdev' for 'Video Bus'
[ 12803.699] (**) Video Bus: always reports core events
[ 12803.699] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 12803.699] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 12803.699] (--) evdev: Video Bus: Found keys
[ 12803.699] (II) evdev: Video Bus: Configuring as keyboard
[ 12803.699] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[ 12803.699] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 12803.699] (**) Option "xkb_rules" "evdev"
[ 12803.699] (**) Option "xkb_model" "evdev"
[ 12803.699] (**) Option "xkb_layout" "us"
[ 12803.699] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 12803.699] (II) No input driver specified, ignoring this device.
[ 12803.699] (II) This device may have been added with another device file.
[ 12803.700] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 12803.700] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 12803.700] (II) Using input driver 'evdev' for 'Sleep Button'
[ 12803.700] (**) Sleep Button: always reports core events
[ 12803.700] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 12803.700] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 12803.700] (--) evdev: Sleep Button: Found keys
[ 12803.700] (II) evdev: Sleep Button: Configuring as keyboard
[ 12803.700] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 12803.700] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 12803.700] (**) Option "xkb_rules" "evdev"
[ 12803.700] (**) Option "xkb_model" "evdev"
[ 12803.700] (**) Option "xkb_layout" "us"
[ 12803.700] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 12803.701] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event21)
[ 12803.701] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 12803.701] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 12803.701] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 12803.701] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event21"
[ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
[ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
[ 12803.701] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 12803.701] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input24/event21"
[ 12803.701] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 9)
[ 12803.701] (**) Option "xkb_rules" "evdev"
[ 12803.701] (**) Option "xkb_model" "evdev"
[ 12803.701] (**) Option "xkb_layout" "us"
[ 12803.701] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event22)
[ 12803.701] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 12803.701] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 12803.701] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 12803.701] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event22"
[ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
[ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons
[ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
[ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Found relative axes
[ 12803.701] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing relative x/y axes to exist.
[ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Found absolute axes
[ 12803.701] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing absolute x/y axes to exist.
[ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
[ 12803.701] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as mouse
[ 12803.701] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 12803.701] (II) evdev: Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
[ 12803.701] (**) evdev: Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
[ 12803.701] (**) evdev: Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12803.701] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input25/event22"
[ 12803.701] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 10)
[ 12803.701] (**) Option "xkb_rules" "evdev"
[ 12803.701] (**) Option "xkb_model" "evdev"
[ 12803.701] (**) Option "xkb_layout" "us"
[ 12803.702] (II) evdev: Logitech Logitech Illuminated Keyboard: initialized for relative axes.
[ 12803.702] (WW) evdev: Logitech Logitech Illuminated Keyboard: ignoring absolute axes.
[ 12803.702] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1
[ 12803.702] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0
[ 12803.702] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000
[ 12803.702] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4
[ 12803.702] (II) config/udev: Adding input device HP HD Webcam [Fixed] (/dev/input/event7)
[ 12803.702] (**) HP HD Webcam [Fixed]: Applying InputClass "evdev keyboard catchall"
[ 12803.702] (II) Using input driver 'evdev' for 'HP HD Webcam [Fixed]'
[ 12803.702] (**) HP HD Webcam [Fixed]: always reports core events
[ 12803.702] (**) evdev: HP HD Webcam [Fixed]: Device: "/dev/input/event7"
[ 12803.702] (--) evdev: HP HD Webcam [Fixed]: Vendor 0x4f2 Product 0xb2ef
[ 12803.702] (--) evdev: HP HD Webcam [Fixed]: Found keys
[ 12803.702] (II) evdev: HP HD Webcam [Fixed]: Configuring as keyboard
[ 12803.702] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input7/event7"
[ 12803.702] (II) XINPUT: Adding extended input device "HP HD Webcam [Fixed]" (type: KEYBOARD, id 11)
[ 12803.702] (**) Option "xkb_rules" "evdev"
[ 12803.702] (**) Option "xkb_model" "evdev"
[ 12803.702] (**) Option "xkb_layout" "us"
[ 12803.703] (II) config/udev: Adding input device OCT KVMLite (/dev/input/event19)
[ 12803.703] (**) OCT KVMLite: Applying InputClass "evdev keyboard catchall"
[ 12803.703] (II) Using input driver 'evdev' for 'OCT KVMLite'
[ 12803.703] (**) OCT KVMLite: always reports core events
[ 12803.703] (**) evdev: OCT KVMLite: Device: "/dev/input/event19"
[ 12803.703] (--) evdev: OCT KVMLite: Vendor 0xb39 Product 0x3
[ 12803.703] (--) evdev: OCT KVMLite: Found keys
[ 12803.703] (II) evdev: OCT KVMLite: Configuring as keyboard
[ 12803.703] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.1/1-1.4.1.1:1.0/input/input19/event19"
[ 12803.703] (II) XINPUT: Adding extended input device "OCT KVMLite" (type: KEYBOARD, id 12)
[ 12803.703] (**) Option "xkb_rules" "evdev"
[ 12803.703] (**) Option "xkb_model" "evdev"
[ 12803.703] (**) Option "xkb_layout" "us"
[ 12803.703] (II) config/udev: Adding input device Saitek Cyborg R.A.T.9 Wireless Mouse (/dev/input/event20)
[ 12803.703] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: Applying InputClass "evdev pointer catchall"
[ 12803.703] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: Applying InputClass "R.A.T.9"
[ 12803.703] (II) Using input driver 'evdev' for 'Saitek Cyborg R.A.T.9 Wireless Mouse'
[ 12803.703] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: always reports core events
[ 12803.703] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Device: "/dev/input/event20"
[ 12803.704] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: ButtonMapping '1 2 3 4 5 0 0 8 9 7 6 12 0 0 0 16 17'
[ 12803.704] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Vendor 0x6a3 Product 0xcd9
[ 12803.704] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found 17 mouse buttons
[ 12803.704] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found scroll wheel(s)
[ 12803.704] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found relative axes
[ 12803.704] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found x and y relative axes
[ 12803.704] (II) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Configuring as mouse
[ 12803.704] (II) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Adding scrollwheel support
[ 12803.704] (**) Option "YAxisMapping" "10 11"
[ 12803.704] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: YAxisMapping: buttons 10 and 11
[ 12803.704] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12803.704] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.0/input/input23/event20"
[ 12803.704] (II) XINPUT: Adding extended input device "Saitek Cyborg R.A.T.9 Wireless Mouse" (type: MOUSE, id 13)
[ 12803.704] (II) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: initialized for relative axes.
[ 12803.704] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) keeping acceleration scheme 1
[ 12803.704] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) acceleration profile 0
[ 12803.704] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) acceleration factor: 2.000
[ 12803.704] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) acceleration threshold: 4
[ 12803.704] (II) config/udev: Adding input device Saitek Cyborg R.A.T.9 Wireless Mouse (/dev/input/mouse2)
[ 12803.704] (II) No input driver specified, ignoring this device.
[ 12803.704] (II) This device may have been added with another device file.
[ 12803.704] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 12803.704] (II) No input driver specified, ignoring this device.
[ 12803.704] (II) This device may have been added with another device file.
[ 12803.705] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event10)
[ 12803.705] (II) No input driver specified, ignoring this device.
[ 12803.705] (II) This device may have been added with another device file.
[ 12803.705] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11)
[ 12803.705] (II) No input driver specified, ignoring this device.
[ 12803.705] (II) This device may have been added with another device file.
[ 12803.705] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 12803.705] (II) No input driver specified, ignoring this device.
[ 12803.705] (II) This device may have been added with another device file.
[ 12803.705] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event13)
[ 12803.705] (II) No input driver specified, ignoring this device.
[ 12803.705] (II) This device may have been added with another device file.
[ 12803.705] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event14)
[ 12803.705] (II) No input driver specified, ignoring this device.
[ 12803.705] (II) This device may have been added with another device file.
[ 12803.706] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
[ 12803.706] (II) No input driver specified, ignoring this device.
[ 12803.706] (II) This device may have been added with another device file.
[ 12803.706] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event16)
[ 12803.706] (II) No input driver specified, ignoring this device.
[ 12803.706] (II) This device may have been added with another device file.
[ 12803.706] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 12803.706] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 12803.706] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 12803.706] (**) AT Translated Set 2 keyboard: always reports core events
[ 12803.706] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 12803.706] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 12803.706] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 12803.706] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 12803.706] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 12803.706] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 12803.706] (**) Option "xkb_rules" "evdev"
[ 12803.706] (**) Option "xkb_model" "evdev"
[ 12803.706] (**) Option "xkb_layout" "us"
[ 12803.707] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event17)
[ 12803.707] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 12803.707] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 12803.707] (**) PS/2 Generic Mouse: always reports core events
[ 12803.707] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event17"
[ 12803.707] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
[ 12803.707] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
[ 12803.707] (--) evdev: PS/2 Generic Mouse: Found relative axes
[ 12803.707] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
[ 12803.707] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
[ 12803.707] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 12803.707] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12803.707] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input17/event17"
[ 12803.707] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 15)
[ 12803.707] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
[ 12803.707] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 12803.707] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 12803.707] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 12803.707] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 12803.707] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
[ 12803.707] (II) No input driver specified, ignoring this device.
[ 12803.707] (II) This device may have been added with another device file.
[ 12803.707] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event18)
[ 12803.707] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 12803.707] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 12803.707] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 12803.707] (II) LoadModule: "synaptics"
[ 12803.708] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 12803.708] (II) Module synaptics: vendor="X.Org Foundation"
[ 12803.708] compiled for 1.13.2, module version = 1.6.3
[ 12803.708] Module class: X.Org XInput Driver
[ 12803.708] ABI class: X.Org XInput driver, version 18.0
[ 12803.708] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 12803.708] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 12803.708] (**) Option "Device" "/dev/input/event18"
[ 12803.778] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 12803.778] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1200 - 5736
[ 12803.778] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 824 - 5172
[ 12803.778] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 12803.778] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 12803.778] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 12803.778] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 12803.778] (**) Option "TapButton1" "1"
[ 12803.779] (**) Option "TapButton2" "2"
[ 12803.779] (**) Option "TapButton3" "3"
[ 12803.779] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 12803.779] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 12803.805] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input18/event18"
[ 12803.805] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 16)
[ 12803.805] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 12803.805] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 12803.805] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.032
[ 12803.805] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 12803.805] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 12803.805] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 12803.805] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 12803.805] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 12803.806] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 12803.806] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 12803.806] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
[ 12803.806] (II) No input driver specified, ignoring this device.
[ 12803.806] (II) This device may have been added with another device file.
[ 12803.806] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 12803.806] (II) No input driver specified, ignoring this device.
[ 12803.806] (II) This device may have been added with another device file.
[ 12803.806] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 12803.806] (II) No input driver specified, ignoring this device.
[ 12803.806] (II) This device may have been added with another device file.
[ 12803.807] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
[ 12803.807] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 12803.807] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 12803.807] (**) HP WMI hotkeys: always reports core events
[ 12803.807] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event9"
[ 12803.807] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 12803.807] (--) evdev: HP WMI hotkeys: Found keys
[ 12803.807] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 12803.807] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[ 12803.807] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 17)
[ 12803.807] (**) Option "xkb_rules" "evdev"
[ 12803.807] (**) Option "xkb_model" "evdev"
[ 12803.807] (**) Option "xkb_layout" "us"
[ 12804.127] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 12804.127] (II) intel(0): Printing DDC gathered Modelines:
[ 12804.127] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 12804.127] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 12832.404] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 12832.404] (II) intel(0): Printing DDC gathered Modelines:
[ 12832.404] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 12832.404] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 12832.816] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 12832.816] (II) intel(0): Printing DDC gathered Modelines:
[ 12832.816] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 12832.816] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 12843.035] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 12843.035] (II) intel(0): Printing DDC gathered Modelines:
[ 12843.035] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 12843.035] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 12843.443] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[ 12843.481] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[ 12843.493] (II) intel(0): switch to mode 1920x1080 on crtc 5 (pipe 1)
[ 12843.702] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 12843.702] (II) intel(0): Printing DDC gathered Modelines:
[ 12843.702] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 12843.702] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 12849.209] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 12851.804] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 12851.804] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[ 12851.855] (II) intel(0): switch to mode 1920x1080 on crtc 5 (pipe 1)
[ 12852.035] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 12852.035] (II) intel(0): Printing DDC gathered Modelines:
[ 12852.036] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 12852.036] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 12852.458] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 14696.360] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[ 14696.540] (II) intel(0): switch to mode 1920x1080 on crtc 5 (pipe 1)
[ 15755.118] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[ 15755.300] (II) intel(0): switch to mode 1920x1080 on crtc 5 (pipe 1)
[ 19135.570] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 19135.570] (II) intel(0): Printing DDC gathered Modelines:
[ 19135.570] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 19135.570] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 19338.494] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 19338.494] (II) intel(0): Printing DDC gathered Modelines:
[ 19338.494] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 19338.494] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 19338.907] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 19338.907] (II) intel(0): Printing DDC gathered Modelines:
[ 19338.907] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 19338.907] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 19339.308] [mi] Increasing EQ size to 512 to prevent dropped events.
[ 19361.868] (II) config/udev: removing device OCT KVMLite
[ 19361.871] (II) evdev: OCT KVMLite: Close
[ 19361.871] (II) UnloadModule: "evdev"
[ 19363.084] (II) config/udev: Adding input device OCT KVMLite (/dev/input/event19)
[ 19363.084] (**) OCT KVMLite: Applying InputClass "evdev keyboard catchall"
[ 19363.084] (II) Using input driver 'evdev' for 'OCT KVMLite'
[ 19363.084] (**) OCT KVMLite: always reports core events
[ 19363.084] (**) evdev: OCT KVMLite: Device: "/dev/input/event19"
[ 19363.084] (--) evdev: OCT KVMLite: Vendor 0xb39 Product 0x3
[ 19363.084] (--) evdev: OCT KVMLite: Found keys
[ 19363.084] (II) evdev: OCT KVMLite: Configuring as keyboard
[ 19363.085] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.1/1-1.4.1.1:1.0/input/input26/event19"
[ 19363.085] (II) XINPUT: Adding extended input device "OCT KVMLite" (type: KEYBOARD, id 12)
[ 19363.085] (**) Option "xkb_rules" "evdev"
[ 19363.085] (**) Option "xkb_model" "evdev"
[ 19363.085] (**) Option "xkb_layout" "us"
[ 19368.413] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 19368.414] (II) intel(0): Printing DDC gathered Modelines:
[ 19368.414] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 19368.414] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 19368.826] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 19368.826] (II) intel(0): Printing DDC gathered Modelines:
[ 19368.826] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 19368.827] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 19529.431] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 19529.431] (II) intel(0): Printing DDC gathered Modelines:
[ 19529.431] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 19529.431] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 19530.153] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 19530.153] (II) intel(0): Printing DDC gathered Modelines:
[ 19530.153] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 19530.153] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 19540.502] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 19540.502] (II) intel(0): Printing DDC gathered Modelines:
[ 19540.502] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 19540.502] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 19540.991] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 19540.991] (II) intel(0): Printing DDC gathered Modelines:
[ 19540.991] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 19540.991] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 19545.780] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 19545.780] (II) intel(0): Printing DDC gathered Modelines:
[ 19545.780] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 19545.780] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 19546.260] (II) intel(0): switch to mode 1920x1080 on crtc 7 (pipe 2)
[ 19546.455] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 19546.455] (II) intel(0): Printing DDC gathered Modelines:
[ 19546.455] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 19546.455] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 20234.499] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 20234.499] (II) intel(0): Printing DDC gathered Modelines:
[ 20234.499] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 20234.499] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
I had a look on the windows box and as far as I can tell the same mode is used 1920x1080@60Hz. I really have no idea of what's is going on, so far I can think of :
- Something wrong with xorg
- Something wrong with the i915 driver
- The KVM cable armouring
- Something else?!
Any suggestion/remark/help is welcome
And please let me know if you need me to gather more information.
EDIT 1:
Crappy image hoster
Last edited by dna (2013-03-12 09:05:40)Hi, sorry for the delayed answer, I didn't have the time to update the topic yesterday evening.
Also, when you boot the Arch machine, do you have the kvm set to its port until from bootloader until X is up? I have an issue with resolution detection when I boot any Linux with my kvm set to another port. It's not artefacts, but it may be worth looking into.
During the entire boot process up to some point in the systemd init sequence my external screens are disabled either by using the KVM switch or not (When the KVM is used, the active port is set to the Arch box).
I have did some research yesterday and I am wondering if that might be caused by DDC?! I found this post on the Open Suze forums. The user seems to describe a simmilar issue but with another hardware.
I have been trying to disable DDC but unfortunately without success so far. By adding to the device section of Xorg (According the intel man page)
Option "DDC" "false"
The option is simply ignored :
1 dna@DNA-NOTEBOOK ~ % grep DDC /var/log/Xorg.0.log
[ 504.104] (WW) intel(0): Option "NoDDC" is not used
[ 505.189] (II) intel(0): Printing DDC gathered Modelines:
Is that because KMS has now become mandatory?
Could those artifacts be the actual DDC queries? or some signal corruption due to improper handling on the KVM switch?
EDIT1:
Well according to the data sheet, this switch should support DDC with DDC2 Monitor. How can I found out which DDC version my monitor support? I can't find anything on the web for this model.
I am also contacting Digitus regarding this issue. I will keep this post updated.
EDIT2:
I keep digging this stuff and I don't think it has to do with DDC for two reasons. First I can disable DDC/CI feature on my monitor. Sadly it didn't help. Still those artifacts. Second xrandr is able to read the EDID correctly. I am no expert but as I understand that's why DDC is meant for.
I have also noticed an interesting thing this afternoon. I was working remotely on a box via rdp but for some reason the artifacts was not rendered on the viewer. They stopped at the border ... Any idea?
EDIT3:
I kept investigating this issue during the past weekend and I think it's related to the intel driver. First I have tested the switch with 2 others machines. The first one was running a dual boot with windows 8 and arch. Both OS detected and rendered the display correctly (On windows the latest catalyst driver was used and on arch the open source radeon driver). The second setup however produced the same display corruption (As the picture in the first post) and was also running the intel driver but on a HD 3000 serie graphic chip.
Secondly I noticed (happend only once) a couple of messages in the xorg log :
[ 40264.490] (EE) intel(0): sna_mode_redisplay: page flipping failed, disabling CRTC:3 (pipe=0)
[ 40264.490] (EE) intel(0): sna_mode_redisplay: page flipping failed, disabling CRTC:5 (pipe=1)
I have tried rolling back to uxa + disabling triple buffer but sadly the issue remain.
I was not able to replicate the above messages. Here follows 2 xorg log. Maybe that someone has an idea?!
Xorg.0.log With SNA+TripleBuffer+TearFree
[ 41601.648]
X.Org X Server 1.13.3
Release Date: 2013-03-07
[ 41601.648] X Protocol Version 11, Revision 0
[ 41601.648] Build Operating System: Linux 3.8.2-1-ARCH x86_64
[ 41601.648] Current Operating System: Linux DNA-NOTEBOOK 3.7.10-1-ARCH #1 SMP PREEMPT Thu Feb 28 09:50:17 CET 2013 x86_64
[ 41601.648] Kernel command line: root=/dev/sda2 ro elevator=noop acpi_osi=Linux acpi_backlight=vendor initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 41601.649] Build Date: 09 March 2013 08:45:37AM
[ 41601.649]
[ 41601.649] Current version of pixman: 0.28.2
[ 41601.649] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 41601.649] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 41601.649] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 18 14:41:47 2013
[ 41601.649] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 41601.649] (==) No Layout section. Using the first Screen section.
[ 41601.649] (==) No screen section available. Using defaults.
[ 41601.649] (**) |-->Screen "Default Screen Section" (0)
[ 41601.649] (**) | |-->Monitor "<default monitor>"
[ 41601.649] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 41601.649] (**) | |-->Device "Intel Graphics"
[ 41601.649] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 41601.649] (==) Automatically adding devices
[ 41601.649] (==) Automatically enabling devices
[ 41601.649] (==) Automatically adding GPU devices
[ 41601.649] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 41601.649] Entry deleted from font path.
[ 41601.649] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 41601.649] Entry deleted from font path.
[ 41601.649] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 41601.649] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 41601.649] Entry deleted from font path.
[ 41601.649] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 41601.649] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 41601.649] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 41601.649] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 41601.649] (II) Loader magic: 0x7fcc20
[ 41601.649] (II) Module ABI versions:
[ 41601.649] X.Org ANSI C Emulation: 0.4
[ 41601.649] X.Org Video Driver: 13.1
[ 41601.649] X.Org XInput driver : 18.0
[ 41601.649] X.Org Server Extension : 7.0
[ 41601.649] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 41601.651] (--) PCI:*(0:0:2:0) 8086:0166:103c:1815 rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00002000/64
[ 41601.651] Initializing built-in extension Generic Event Extension
[ 41601.651] Initializing built-in extension SHAPE
[ 41601.651] Initializing built-in extension MIT-SHM
[ 41601.651] Initializing built-in extension XInputExtension
[ 41601.651] Initializing built-in extension XTEST
[ 41601.651] Initializing built-in extension BIG-REQUESTS
[ 41601.651] Initializing built-in extension SYNC
[ 41601.651] Initializing built-in extension XKEYBOARD
[ 41601.651] Initializing built-in extension XC-MISC
[ 41601.651] Initializing built-in extension SECURITY
[ 41601.651] Initializing built-in extension XINERAMA
[ 41601.651] Initializing built-in extension XFIXES
[ 41601.651] Initializing built-in extension RENDER
[ 41601.651] Initializing built-in extension RANDR
[ 41601.651] Initializing built-in extension COMPOSITE
[ 41601.651] Initializing built-in extension DAMAGE
[ 41601.651] Initializing built-in extension MIT-SCREEN-SAVER
[ 41601.651] Initializing built-in extension DOUBLE-BUFFER
[ 41601.651] Initializing built-in extension RECORD
[ 41601.651] Initializing built-in extension DPMS
[ 41601.651] Initializing built-in extension X-Resource
[ 41601.651] Initializing built-in extension XVideo
[ 41601.651] Initializing built-in extension XVideo-MotionCompensation
[ 41601.651] Initializing built-in extension XFree86-VidModeExtension
[ 41601.652] Initializing built-in extension XFree86-DGA
[ 41601.652] Initializing built-in extension XFree86-DRI
[ 41601.653] Initializing built-in extension DRI2
[ 41601.653] (II) LoadModule: "glx"
[ 41601.653] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 41601.653] (II) Module glx: vendor="X.Org Foundation"
[ 41601.653] compiled for 1.13.3, module version = 1.0.0
[ 41601.653] ABI class: X.Org Server Extension, version 7.0
[ 41601.653] (==) AIGLX enabled
[ 41601.653] Loading extension GLX
[ 41601.653] (II) LoadModule: "intel"
[ 41601.654] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 41601.654] (II) Module intel: vendor="X.Org Foundation"
[ 41601.654] compiled for 1.13.2.901, module version = 2.21.3
[ 41601.654] Module class: X.Org Video Driver
[ 41601.654] ABI class: X.Org Video Driver, version 13.1
[ 41601.654] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 41601.654] (++) using VT number 1
[ 41601.654] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 41601.654] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 41601.654] (==) intel(0): RGB weight 888
[ 41601.654] (==) intel(0): Default visual is TrueColor
[ 41601.654] (**) intel(0): Option "AccelMethod" "sna"
[ 41601.654] (**) intel(0): Option "TearFree" "true"
[ 41601.654] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 41601.655] (**) intel(0): Framebuffer tiled
[ 41601.655] (**) intel(0): Pixmaps tiled
[ 41601.655] (**) intel(0): "Tear free" enabled
[ 41601.655] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 41601.655] (II) intel(0): Output LVDS1 has no monitor section
[ 41601.655] (--) intel(0): found backlight control interface intel_backlight (type 'raw')
[ 41601.666] (II) intel(0): Output VGA1 has no monitor section
[ 41601.742] (II) intel(0): Output HDMI1 has no monitor section
[ 41601.782] (II) intel(0): Output DP1 has no monitor section
[ 41602.035] (II) intel(0): Output HDMI2 has no monitor section
[ 41602.049] (II) intel(0): Output HDMI3 has no monitor section
[ 41602.089] (II) intel(0): Output DP2 has no monitor section
[ 41602.129] (II) intel(0): Output DP3 has no monitor section
[ 41602.129] (II) intel(0): EDID for output LVDS1
[ 41602.129] (II) intel(0): Manufacturer: SEC Model: 3953 Serial#: 0
[ 41602.129] (II) intel(0): Year: 2012 Week: 0
[ 41602.129] (II) intel(0): EDID Version: 1.4
[ 41602.129] (II) intel(0): Digital Display Input
[ 41602.129] (II) intel(0): 6 bits per channel
[ 41602.129] (II) intel(0): Digital interface is undefined
[ 41602.129] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 14
[ 41602.129] (II) intel(0): Gamma: 2.20
[ 41602.129] (II) intel(0): No DPMS capabilities specified
[ 41602.129] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 41602.129] (II) intel(0): First detailed timing is preferred mode
[ 41602.129] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 41602.129] (II) intel(0): redX: 0.576 redY: 0.349 greenX: 0.336 greenY: 0.556
[ 41602.129] (II) intel(0): blueX: 0.159 blueY: 0.115 whiteX: 0.313 whiteY: 0.329
[ 41602.129] (II) intel(0): Manufacturer's mask: 0
[ 41602.129] (II) intel(0): Supported detailed timing:
[ 41602.129] (II) intel(0): clock: 76.9 MHz Image Size: 256 x 144 mm
[ 41602.129] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1644 h_border: 0
[ 41602.129] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
[ 41602.129] (II) intel(0): Supported detailed timing:
[ 41602.129] (II) intel(0): clock: 51.3 MHz Image Size: 256 x 144 mm
[ 41602.129] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1644 h_border: 0
[ 41602.129] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
[ 41602.129] (II) intel(0): Unknown vendor-specific block 2
[ 41602.129] (II) intel(0): EDID (in hex):
[ 41602.129] (II) intel(0): 00ffffffffffff004ca3533900000000
[ 41602.129] (II) intel(0): 00160104901a0e780a91e59359568e28
[ 41602.129] (II) intel(0): 1d505400000001010101010101010101
[ 41602.129] (II) intel(0): 0101010101010e1e561651000c303020
[ 41602.129] (II) intel(0): 25000090100000190914561651000c30
[ 41602.129] (II) intel(0): 30202500009010000019000000000000
[ 41602.129] (II) intel(0): 00000000000000000000000000000002
[ 41602.129] (II) intel(0): 000c4cff0a3c64100f196400000000c1
[ 41602.129] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 41602.129] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 41602.129] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 41602.129] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 41602.129] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 41602.129] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 41602.129] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 41602.129] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 41602.129] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 41602.129] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 41602.129] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 41602.129] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 41602.129] (II) intel(0): Printing probed modes for output LVDS1
[ 41602.129] (II) intel(0): Modeline "1366x768"x60.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 41602.129] (II) intel(0): Modeline "1366x768"x40.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 41602.129] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 41602.129] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 41602.129] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 41602.129] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 41602.142] (II) intel(0): EDID for output VGA1
[ 41602.218] (II) intel(0): EDID for output HDMI1
[ 41602.218] (II) intel(0): Manufacturer: ACR Model: 198 Serial#: 74506241
[ 41602.218] (II) intel(0): Year: 2010 Week: 47
[ 41602.218] (II) intel(0): EDID Version: 1.3
[ 41602.218] (II) intel(0): Digital Display Input
[ 41602.219] (II) intel(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 41602.219] (II) intel(0): Gamma: 2.20
[ 41602.219] (II) intel(0): DPMS capabilities: Off
[ 41602.219] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 41602.219] (II) intel(0): First detailed timing is preferred mode
[ 41602.219] (II) intel(0): redX: 0.631 redY: 0.349 greenX: 0.341 greenY: 0.622
[ 41602.219] (II) intel(0): blueX: 0.152 blueY: 0.058 whiteX: 0.313 whiteY: 0.329
[ 41602.219] (II) intel(0): Supported established timings:
[ 41602.219] (II) intel(0): 720x400@70Hz
[ 41602.219] (II) intel(0): 640x480@60Hz
[ 41602.219] (II) intel(0): 640x480@67Hz
[ 41602.219] (II) intel(0): 800x600@56Hz
[ 41602.219] (II) intel(0): 800x600@60Hz
[ 41602.219] (II) intel(0): 1024x768@60Hz
[ 41602.219] (II) intel(0): 1024x768@70Hz
[ 41602.219] (II) intel(0): Manufacturer's mask: 0
[ 41602.219] (II) intel(0): Supported standard timings:
[ 41602.219] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 41602.219] (II) intel(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 41602.219] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 41602.219] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 41602.219] (II) intel(0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 41602.219] (II) intel(0): Supported detailed timing:
[ 41602.219] (II) intel(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 41602.219] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 41602.219] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 41602.219] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 41602.219] (II) intel(0): Monitor name: Acer P226HQL
[ 41602.219] (II) intel(0): Serial No: LNJ0W0014320
[ 41602.219] (II) intel(0): EDID (in hex):
[ 41602.219] (II) intel(0): 00ffffffffffff000472980101e07004
[ 41602.219] (II) intel(0): 2f14010380301b782a9535a159579f27
[ 41602.219] (II) intel(0): 0e5054b30c00714f810081809500d1c0
[ 41602.219] (II) intel(0): 010101010101023a801871382d40582c
[ 41602.219] (II) intel(0): 4500dd0c1100001e000000fd00384b1e
[ 41602.219] (II) intel(0): 5311000a202020202020000000fc0041
[ 41602.219] (II) intel(0): 636572205032323648514c0a000000ff
[ 41602.219] (II) intel(0): 004c4e4a3057303031343332300a0059
[ 41602.219] (II) intel(0): Printing probed modes for output HDMI1
[ 41602.219] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 41602.219] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 41602.219] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
[ 41602.219] (II) intel(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)
[ 41602.219] (II) intel(0): Modeline "1400x1050"x59.9 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[ 41602.219] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 41602.219] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 41602.219] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 41602.219] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 41602.219] (II) intel(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 41602.219] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 41602.219] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
[ 41602.219] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 41602.219] (II) intel(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 41602.219] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 41602.219] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 41602.219] (II) intel(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
[ 41602.219] (II) intel(0): Modeline "1280x768"x60.0 68.25 1280 1328 1360 1440 768 771 778 790 +hsync -vsync (47.4 kHz e)
[ 41602.219] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 41602.219] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 41602.219] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 41602.219] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 41602.219] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 41602.219] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 41602.219] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 41602.219] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 41602.219] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 41602.219] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 41602.219] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 41602.219] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 41602.219] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 41602.219] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 41602.259] (II) intel(0): EDID for output DP1
[ 41602.512] (II) intel(0): EDID for output HDMI2
[ 41602.512] (II) intel(0): Manufacturer: ACR Model: 198 Serial#: 294659115
[ 41602.512] (II) intel(0): Year: 2011 Week: 19
[ 41602.512] (II) intel(0): EDID Version: 1.3
[ 41602.512] (II) intel(0): Digital Display Input
[ 41602.512] (II) intel(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 41602.512] (II) intel(0): Gamma: 2.20
[ 41602.512] (II) intel(0): DPMS capabilities: Off
[ 41602.512] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 41602.512] (II) intel(0): First detailed timing is preferred mode
[ 41602.512] (II) intel(0): redX: 0.631 redY: 0.349 greenX: 0.341 greenY: 0.622
[ 41602.512] (II) intel(0): blueX: 0.152 blueY: 0.058 whiteX: 0.313 whiteY: 0.329
[ 41602.512] (II) intel(0): Supported established timings:
[ 41602.512] (II) intel(0): 720x400@70Hz
[ 41602.512] (II) intel(0): 640x480@60Hz
[ 41602.512] (II) intel(0): 640x480@67Hz
[ 41602.512] (II) intel(0): 800x600@56Hz
[ 41602.512] (II) intel(0): 800x600@60Hz
[ 41602.512] (II) intel(0): 1024x768@60Hz
[ 41602.512] (II) intel(0): 1024x768@70Hz
[ 41602.512] (II) intel(0): Manufacturer's mask: 0
[ 41602.512] (II) intel(0): Supported standard timings:
[ 41602.512] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 41602.512] (II) intel(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 41602.512] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 41602.512] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 41602.512] (II) intel(0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 41602.512] (II) intel(0): Supported detailed timing:
[ 41602.512] (II) intel(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 41602.512] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 41602.512] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 41602.512] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 41602.512] (II) intel(0): Monitor name: Acer P226HQL
[ 41602.512] (II) intel(0): Serial No: LNJ0W0014320
[ 41602.512] (II) intel(0): EDID (in hex):
[ 41602.512] (II) intel(0): 00ffffffffffff00047298012b249011
[ 41602.512] (II) intel(0): 1315010380301b782a9535a159579f27
[ 41602.512] (II) intel(0): 0e5054b30c00714f810081809500d1c0
[ 41602.512] (II) intel(0): 010101010101023a801871382d40582c
[ 41602.512] (II) intel(0): 4500dd0c1100001e000000fd00384b1e
[ 41602.512] (II) intel(0): 5311000a202020202020000000fc0041
[ 41602.512] (II) intel(0): 636572205032323648514c0a000000ff
[ 41602.512] (II) intel(0): 004c4e4a3057303031343332300a00d9
[ 41602.512] (II) intel(0): Printing probed modes for output HDMI2
[ 41602.512] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 41602.512] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 41602.512] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
[ 41602.512] (II) intel(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)
[ 41602.512] (II) intel(0): Modeline "1400x1050"x59.9 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[ 41602.512] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 41602.512] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 41602.512] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 41602.512] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 41602.512] (II) intel(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 41602.512] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 41602.512] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
[ 41602.512] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 41602.512] (II) intel(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 41602.512] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 41602.512] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 41602.512] (II) intel(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
[ 41602.513] (II) intel(0): Modeline "1280x768"x60.0 68.25 1280 1328 1360 1440 768 771 778 790 +hsync -vsync (47.4 kHz e)
[ 41602.513] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 41602.513] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 41602.513] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 41602.513] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 41602.513] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 41602.513] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 41602.513] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 41602.513] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 41602.513] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 41602.513] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 41602.513] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 41602.513] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 41602.513] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 41602.513] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 41602.525] (II) intel(0): EDID for output HDMI3
[ 41602.565] (II) intel(0): EDID for output DP2
[ 41602.605] (II) intel(0): EDID for output DP3
[ 41602.605] (II) intel(0): Output LVDS1 connected
[ 41602.605] (II) intel(0): Output VGA1 disconnected
[ 41602.605] (II) intel(0): Output HDMI1 connected
[ 41602.605] (II) intel(0): Output DP1 disconnected
[ 41602.605] (II) intel(0): Output HDMI2 connected
[ 41602.605] (II) intel(0): Output HDMI3 disconnected
[ 41602.605] (II) intel(0): Output DP2 disconnected
[ 41602.605] (II) intel(0): Output DP3 disconnected
[ 41602.605] (II) intel(0): Using exact sizes for initial modes
[ 41602.605] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 41602.605] (II) intel(0): Output HDMI1 using initial mode 1366x768
[ 41602.605] (II) intel(0): Output HDMI2 using initial mode 1366x768
[ 41602.605] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 41602.605] (==) intel(0): DPI set to (96, 96)
[ 41602.606] (II) Loading sub module "dri2"
[ 41602.606] (II) LoadModule: "dri2"
[ 41602.606] (II) Module "dri2" already built-in
[ 41602.606] (==) Depth 24 pixmap format is 32 bpp
[ 41602.606] (II) intel(0): SNA initialized with IvyBridge backend
[ 41602.606] (==) intel(0): Backing store disabled
[ 41602.606] (==) intel(0): Silken mouse enabled
[ 41602.606] (II) intel(0): HW Cursor enabled
[ 41602.606] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 41602.606] (==) intel(0): DPMS enabled
[ 41602.606] (II) intel(0): [DRI2] Setup complete
[ 41602.606] (II) intel(0): [DRI2] DRI driver: i965
[ 41602.606] (II) intel(0): direct rendering: DRI2 Enabled
[ 41602.606] (==) intel(0): hotplug detection: "enabled"
[ 41602.606] (--) RandR disabled
[ 41602.612] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 41602.612] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 41602.612] (II) AIGLX: enabled GLX_ARB_create_context
[ 41602.612] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 41602.612] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 41602.613] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 41602.613] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 41602.613] (II) AIGLX: Loaded and initialized i965
[ 41602.613] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 41602.613] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[ 41602.729] (II) intel(0): switch to mode 1366x768 on crtc 5 (pipe 1)
[ 41602.909] (II) intel(0): switch to mode 1366x768 on crtc 7 (pipe 2)
[ 41603.090] (II) intel(0): Setting screen physical size to 361 x 203
[ 41603.110] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 41603.110] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 41603.110] (II) LoadModule: "evdev"
[ 41603.110] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 41603.110] (II) Module evdev: vendor="X.Org Foundation"
[ 41603.110] compiled for 1.13.0, module version = 2.7.3
[ 41603.110] Module class: X.Org XInput Driver
[ 41603.110] ABI class: X.Org XInput driver, version 18.0
[ 41603.110] (II) Using input driver 'evdev' for 'Power Button'
[ 41603.110] (**) Power Button: always reports core events
[ 41603.110] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 41603.110] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 41603.111] (--) evdev: Power Button: Found keys
[ 41603.111] (II) evdev: Power Button: Configuring as keyboard
[ 41603.111] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 41603.111] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 41603.111] (**) Option "xkb_rules" "evdev"
[ 41603.111] (**) Option "xkb_model" "evdev"
[ 41603.111] (**) Option "xkb_layout" "us"
[ 41603.125] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 41603.125] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 41603.125] (II) Using input driver 'evdev' for 'Video Bus'
[ 41603.125] (**) Video Bus: always reports core events
[ 41603.125] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 41603.125] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 41603.125] (--) evdev: Video Bus: Found keys
[ 41603.125] (II) evdev: Video Bus: Configuring as keyboard
[ 41603.125] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[ 41603.125] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 41603.125] (**) Option "xkb_rules" "evdev"
[ 41603.125] (**) Option "xkb_model" "evdev"
[ 41603.125] (**) Option "xkb_layout" "us"
[ 41603.125] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 41603.125] (II) No input driver specified, ignoring this device.
[ 41603.125] (II) This device may have been added with another device file.
[ 41603.125] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 41603.125] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 41603.125] (II) Using input driver 'evdev' for 'Sleep Button'
[ 41603.125] (**) Sleep Button: always reports core events
[ 41603.125] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[ 41603.125] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 41603.125] (--) evdev: Sleep Button: Found keys
[ 41603.125] (II) evdev: Sleep Button: Configuring as keyboard
[ 41603.126] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 41603.126] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 41603.126] (**) Option "xkb_rules" "evdev"
[ 41603.126] (**) Option "xkb_model" "evdev"
[ 41603.126] (**) Option "xkb_layout" "us"
[ 41603.126] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 41603.126] (II) config/udev: Adding input device HP HD Webcam [Fixed] (/dev/input/event15)
[ 41603.126] (**) HP HD Webcam [Fixed]: Applying InputClass "evdev keyboard catchall"
[ 41603.126] (II) Using input driver 'evdev' for 'HP HD Webcam [Fixed]'
[ 41603.126] (**) HP HD Webcam [Fixed]: always reports core events
[ 41603.126] (**) evdev: HP HD Webcam [Fixed]: Device: "/dev/input/event15"
[ 41603.126] (--) evdev: HP HD Webcam [Fixed]: Vendor 0x4f2 Product 0xb2ef
[ 41603.126] (--) evdev: HP HD Webcam [Fixed]: Found keys
[ 41603.126] (II) evdev: HP HD Webcam [Fixed]: Configuring as keyboard
[ 41603.126] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input15/event15"
[ 41603.126] (II) XINPUT: Adding extended input device "HP HD Webcam [Fixed]" (type: KEYBOARD, id 9)
[ 41603.126] (**) Option "xkb_rules" "evdev"
[ 41603.126] (**) Option "xkb_model" "evdev"
[ 41603.126] (**) Option "xkb_layout" "us"
[ 41603.126] (II) config/udev: Adding input device OCT KVMLite (/dev/input/event18)
[ 41603.127] (**) OCT KVMLite: Applying InputClass "evdev keyboard catchall"
[ 41603.127] (II) Using input driver 'evdev' for 'OCT KVMLite'
[ 41603.127] (**) OCT KVMLite: always reports core events
[ 41603.127] (**) evdev: OCT KVMLite: Device: "/dev/input/event18"
[ 41603.127] (--) evdev: OCT KVMLite: Vendor 0xb39 Product 0x3
[ 41603.127] (--) evdev: OCT KVMLite: Found keys
[ 41603.127] (II) evdev: OCT KVMLite: Configuring as keyboard
[ 41603.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1.1/3-1.4.1.1:1.0/input/input22/event18"
[ 41603.127] (II) XINPUT: Adding extended input device "OCT KVMLite" (type: KEYBOARD, id 10)
[ 41603.127] (**) Option "xkb_rules" "evdev"
[ 41603.127] (**) Option "xkb_model" "evdev"
[ 41603.127] (**) Option "xkb_layout" "us"
[ 41603.127] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event19)
[ 41603.127] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 41603.127] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 41603.127] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 41603.127] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event19"
[ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
[ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
[ 41603.127] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 41603.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1.3/3-1.4.1.3:1.0/input/input23/event19"
[ 41603.127] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 11)
[ 41603.127] (**) Option "xkb_rules" "evdev"
[ 41603.127] (**) Option "xkb_model" "evdev"
[ 41603.127] (**) Option "xkb_layout" "us"
[ 41603.127] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event20)
[ 41603.127] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 41603.127] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 41603.127] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 41603.127] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event20"
[ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
[ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons
[ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
[ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Found relative axes
[ 41603.127] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing relative x/y axes to exist.
[ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Found absolute axes
[ 41603.127] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing absolute x/y axes to exist.
[ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
[ 41603.127] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as mouse
[ 41603.127] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 41603.127] (II) evdev: Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
[ 41603.127] (**) evdev: Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
[ 41603.127] (**) evdev: Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 41603.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1.3/3-1.4.1.3:1.1/input/input24/event20"
[ 41603.128] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 12)
[ 41603.128] (**) Option "xkb_rules" "evdev"
[ 41603.128] (**) Option "xkb_model" "evdev"
[ 41603.128] (**) Option "xkb_layout" "us"
[ 41603.128] (II) evdev: Logitech Logitech Illuminated Keyboard: initialized for relative axes.
[ 41603.128] (WW) evdev: Logitech Logitech Illuminated Keyboard: ignoring absolute axes.
[ 41603.128] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1
[ 41603.128] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0
[ 41603.128] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000
[ 41603.128] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4
[ 41603.128] (II) config/udev: Adding input device Saitek Cyborg R.A.T.9 Wireless Mouse (/dev/input/event21)
[ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: Applying InputClass "evdev pointer catchall"
[ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: Applying InputClass "R.A.T.9"
[ 41603.128] (II) Using input driver 'evdev' for 'Saitek Cyborg R.A.T.9 Wireless Mouse'
[ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: always reports core events
[ 41603.128] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Device: "/dev/input/event21"
[ 41603.128] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: ButtonMapping '1 2 3 4 5 0 0 8 9 7 6 12 0 0 0 16 17'
[ 41603.128] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Vendor 0x6a3 Product 0xcd9
[ 41603.128] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found 17 mouse buttons
[ 41603.128] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found scroll wheel(s)
[ 41603.128] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found relative axes
[ 41603.128] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found x and y relative axes
[ 41603.128] (II) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Configuring as mouse
[ 41603.128] (II) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Adding scrollwheel support
[ 41603.128] (**) Option "YAxisMapping" "10 11"
[ 41603.128] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: YAxisMapping: buttons 10 and 11
[ 41603.128] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 41603.128] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1.4/3-1.4.1.4:1.0/input/input25/event21"
[ 41603.128] (II) XINPUT: Adding extended input device "Saitek Cyborg R.A.T.9 Wireless Mouse" (type: MOUSE, id 13)
[ 41603.128] (II) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: initialized for relative axes.
[ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) keeping acceleration scheme 1
[ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) acceleration profile 0
[ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) acceleration factor: 2.000
[ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) acceleration threshold: 4
[ 41603.129] (II) config/udev: Adding input device Saitek Cyborg R.A.T.9 Wireless Mouse (/dev/input/mouse2)
[ 41603.129] (II) No input driver specified, ignoring this device.
[ 41603.129] (II) This device may have been added with another device file.
[ 41603.129] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 41603.129] (II) No input driver specified, ignoring this device.
[ 41603.129] (II) This device may have been added with another device file.
[ 41603.129] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 41603.129] (II) No input driver specified, ignoring this device.
[ 41603.129] (II) This device may have been added with another device file.
[ 41603.129] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11)
[ 41603.129] (II) No input driver specified, ignoring this device.
[ 41603.129] (II) This device may have been added with another device file.
[ 41603.129] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[ 41603.129] (II) No input driver specified, ignoring this device.
[ 41603.129] (II) This device may have been added with another device file.
[ 41603.129] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[ 41603.129] (II) No input driver specified, ignoring this device.
[ 41603.129] (II) This device may have been added with another device file.
[ 41603.129] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event14)
[ 41603.129] (II) No input driver specified, ignoring this device.
[ 41603.129] (II) This device may have been added with another device file.
[ 41603.130] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event8)
[ 41603.130] (II) No input driver specified, ignoring this device.
[ 41603.130] (II) This device may have been added with another device file.
[ 41603.130] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9)
[ 41603.130] (II) No input driver specified, ignoring this device.
[ 41603.130] (II) This device may have been added with another device file.
[ 41603.130] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 41603.130] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 41603.130] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 41603.130] (**) AT Translated Set 2 keyboard: always reports core events
[ 41603.130] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 41603.130] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 41603.130] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 41603.130] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 41603.130] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 41603.130] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 41603.130] (**) Option "xkb_rules" "evdev"
[ 41603.130] (**) Option "xkb_model" "evdev"
[ 41603.130] (**) Option "xkb_layout" "us"
[ 41603.130] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event16)
[ 41603.130] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 41603.130] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 41603.130] (**) PS/2 Generic Mouse: always reports core events
[ 41603.130] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event16"
[ 41603.130] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
[ 41603.130] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
[ 41603.130] (--) evdev: PS/2 Generic Mouse: Found relative axes
[ 41603.130] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
[ 41603.130] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
[ 41603.130] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 41603.130] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 41603.130] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input16/event16"
[ 41603.130] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 15)
[ 41603.130] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
[ 41603.130] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 41603.130] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 41603.130] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 41603.130] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 41603.131] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
[ 41603.131] (II) No input driver specified, ignoring this device.
[ 41603.131] (II) This device may have been added with another device file.
[ 41603.131] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
[ 41603.131] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 41603.131] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 41603.131] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 41603.131] (II) LoadModule: "synaptics"
[ 41603.131] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 41603.131] (II) Module synaptics: vendor="X.Org Foundation"
[ 41603.131] compiled for 1.13.2, module version = 1.6.3
[ 41603.131] Module class: X.Org XInput Driver
[ 41603.131] ABI class: X.Org XInput driver, version 18.0
[ 41603.131] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 41603.131] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 41603.131] (**) Option "Device" "/dev/input/event17"
[ 41603.182] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1200 - 5736
[ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 824 - 5172
[ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 41603.182] (**) Option "TapButton1" "1"
[ 41603.182] (**) Option "TapButton2" "2"
[ 41603.182] (**) Option "TapButton3" "3"
[ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 41603.182] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 41603.209] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input17/event17"
[ 41603.209] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 16)
[ 41603.209] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 41603.209] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 41603.209] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.032
[ 41603.209] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 41603.209] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 41603.209] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 41603.209] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 41603.209] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 41603.209] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 41603.209] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 41603.209] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
[ 41603.209] (II) No input driver specified, ignoring this device.
[ 41603.209] (II) This device may have been added with another device file.
[ 41603.210] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 41603.210] (II) No input driver specified, ignoring this device.
[ 41603.210] (II) This device may have been added with another device file.
[ 41603.210] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
[ 41603.210] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 41603.210] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 41603.210] (**) HP WMI hotkeys: always reports core events
[ 41603.210] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event6"
[ 41603.210] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 41603.210] (--) evdev: HP WMI hotkeys: Found keys
[ 41603.210] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 41603.210] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[ 41603.210] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 17)
[ 41603.210] (**) Option "xkb_rules" "evdev"
[ 41603.210] (**) Option "xkb_model" "evdev"
[ 41603.210] (**) Option "xkb_layout" "us"
[ 41603.443] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 41603.443] (II) intel(0): Printing DDC gathered Modelines:
[ 41603.443] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 41603.443] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 41608.132] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 41608.132] (II) intel(0): Printing DDC gathered Modelines:
[ 41608.132] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 41608.132] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 41608.609] [mi] Increasing EQ size to 512 to prevent dropped events.
[ 41608.623] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 41608.623] (II) intel(0): Printing DDC gathered Modelines:
[ 41608.623] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 41608.623] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 41618.875] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 41618.876] (II) intel(0): Printing DDC gathered Modelines:
[ 41618.876] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 41618.876] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
[ 41619.358] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[ 41619.386] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[ 41619.394] (II) intel(0): switch to mode 1920x1080 on crtc 5 (pipe 1)
[ 41619.577] (II) intel(0): switch to mode 1920x1080 on crtc 7 (pipe 2)
[ 41619.841] (II) intel(0): EDID vendor "SEC", prod id 14675
[ 41619.841] (II) intel(0): Printing DDC gathered Modelines:
[ 41619.841] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 41619.841] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
Xorg.0.log With UXA+TearFree-TripleBuffer
[ 41275.791]
X.Org X Server 1.13.3
Release Date: 2013-03-07
[ 41275.791] X Protocol Version 11, Revision 0
[ 41275.791] Build Operating System: Linux 3.8.2-1-ARCH x86_64
[ 41275.791] Current Operating System: Linux DNA-NOTEBOOK 3.7.10-1-ARCH #1 SMP PREEMPT Thu Feb 28 09:50:17 CET 2013 x86_64
[ 41275.791] Kernel command line: root=/dev/sda2 ro elevator=noop acpi_osi=Linux acpi_backlight=vendor initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 41275.791] Build Date: 09 March 2013 08:45:37AM
[ 41275.791]
[ 41275.792] Current version of pixman: 0.28.2
[ 41275.792] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 41275.792] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 41275.792] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 18 14:36:21 2013
[ 41275.792] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 41275.793] (==) No Layout section. Using the first Screen section.
[ 41275.793] (==) No screen section available. Using defaults.
[ 41275.793] (**) |-->Screen "Default Screen Section" (0)
[ 41275.793] (**) | |-->Monitor "<default monitor>"
[ 41275.793] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 41275.793] (**) | |-->Device "Intel Graphics"
[ 41275.793] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 41275.793] (==) Automatically adding devices
[ 41275.793] (==) Automatically enabling devices
[ 41275.793] (==) Automatically adding GPU devices
[ 41275.793] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 41275.793] Entry deleted from font path.
[ 41275.793] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 41275.793] Entry deleted from font path.
[ 41275.793] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 41275.793] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 41275.793] Entry deleted from font path.
[ 41275.793] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 41275.793] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 41275.793] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 41275.793] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 41275.793] (II) Loader magic: 0x7fcc20
[ 41275.793] (II) Module ABI versions:
[ 41275.793] X.Org ANSI C Emulation: 0.4
[ 41275.793] X.Org Video Driver: 13.1
[ 41275.793] X.Org XInput driver : 18.0
[ 41275.793] X.Org Server Extension : 7.0
[ 41275.793] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 41275.795] (--) PCI:*(0:0:2:0) 8086:0166:103c:1815 rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00002000/64
[ 41275.795] Initializing built-in extension Generic Event Extension
[ 41275.795] Initializing built-in extension SHAPE
[ 41275.795] Initializing built-in extension MIT-SHM
[ 41275.795] Initializing built-in extension XInputExtension
[ 41275.795] Initializing built-in extension XTEST
[ 41275.795] Initializing built-in extension BIG-REQUESTS
[ 41275.795] Initializing built-in extension SYNC
[ 41275.795] Initializing built-in extension XKEYBOARD
[ 41275.795] Initializing built-in extension XC-MISC
[ 41275.795] Initializing built-in extension SECURITY
[ 41275.795] Initializing built-in extension XINERAMA
[ 41275.795] Initializing built-in extension XFIXES
[ 41275.795] Initializing built-in extension RENDER
[ 41275.795] Initializing built-in extension RANDR
[ 41275.795] Initializing built-in extension COMPOSITE
[ 41275.795] Initializing built-in extension DAMAGE
[ 41275.795] Initializing built-in extension MIT-SCREEN-SAVER
[ 41275.795] Initializing built-in extension DOUBLE-BUFFER
[ 41275.795] Initializing built-in extension RECORD
[ 41275.795] Initializing built-in extension DPMS
[ 41275.795] Initializing built-in extension X-Resource
[ 41275.795] Initializing built-in extension XVideo
[ 41275.795] Initializing built-in extension XVideo-MotionCompensation
[ 41275.795] Initializing built-in extension XFree86-VidModeExtension
[ 41275.796] Initializing built-in extension XFree86-DGA
[ 41275.796] Initializing built-in extension XFree86-DRI
[ 41275.797] Initializing built-in extension DRI2
[ 41275.797] (II) LoadModule: "glx"
[ 41275.798] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 41275.798] (II) Module glx: vendor="X.Org Foundation"
[ 41275.798] compiled for 1.13.3, module version = 1.0.0
[ 41275.798] ABI class: X.Org Server Extension, version 7.0
[ 41275.798] (==) AIGLX enabled
[ 41275.799] Loading extension GLX
[ 41275.799] (II) LoadModule: "intel"
[ 41275.799] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 41275.799] (II) Module intel: vendor="X.Org Foundation"
[ 41275.799] compiled for 1.13.2.901, module version = 2.21.3
[ 41275.799] Module class: X.Org Video Driver
[ 41275.799] ABI class: X.Org Video Driver, version 13.1
[ 41275.799] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 41275.800] (++) using VT number 1
[ 41275.800] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 41275.800] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 41275.800] (==) intel(0): RGB weight 888
[ 41275.800] (==) intel(0): Default visual is TrueColor
[ 41275.800] (**) intel(0): Option "AccelMethod" "uxa"
[ 41275.800] (**) intel(0): Option "TripleBuffer" "false"
[ 41275.800] (**) intel(0): Option "TearFree" "true"
[ 41275.800] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 41275.800] (**) intel(0): Relaxed fencing enabled
[ 41275.800] (**) intel(0): Wait on SwapBuffers? enabled
[ 41275.800] (**) intel(0): Triple buffering? disabled
[ 41275.800] (**) intel(0): Framebuffer tiled
[ 41275.800] (**) intel(0): Pixmaps tiled
[ 41275.800] (**) intel(0): 3D buffers tiled
[ 41275.800] (**) intel(0): SwapBuffers wait enabled
[ 41275.800] (==) intel(0): video overlay key set to 0x101fe
[ 41275.800] (II) intel(0): Output LVDS1 has no monitor section
[ 41275.800] (--) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[ 41275.812] (II) intel(0): Output VGA1 has no monitor section
[ 41275.889] (II) intel(0): Output HDMI1 has no monitor section
[ 41275.929] (II) intel(0): Output DP1 has no monitor section
[ 41276.182] (II) intel(0): Output HDMI2 has no monitor section
[ 41276.195] (II) intel(0): Output HDMI3 has no monitor section
[ 41276.235] (II) intel(0): Output DP2 has no monitor section
[ 41276.275] (II) intel(0): Output DP3 has no monitor section
[ 41276.275] (II) intel(0): EDID for output LVDS1
[ 41276.276] (II) intel(0): Manufacturer: SEC Model: 3953 Serial#: 0
[ 41276.276] (II) intel(0): Year: 2012 Week: 0
[ 41276.276] (II) intel(0): EDID Version: 1.4
[ 41276.276] (II) intel(0): Digital Display Input
[ 41276.276] (II) intel(0): 6 bits per channel
[ 41276.276] (II) intel(0): Digital interface is undefined
[ 41276.276] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 14
[ 41276.276] (II) intel(0): Gamma: 2.20
[ 41276.276] (II) intel(0): No DPMS capabilities specified
[ 41276.276] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 41276.276] (II) intel(0): First detailed timing is preferred mode
[ 41276.276] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 41276.276] (II) intel(0): redX: 0.576 redY: 0.349 greenX: 0.336 greenY: 0.556
[ 41276.276] (II) intel(0): blueX: 0.159 blueY: 0.115 whiteX: 0.313 whiteY: 0.329
[ 41276.276] (II) intel(0): Manufacturer's mask: 0
[ 41276.276] (II) intel(0): Supported detailed timing:
[ 41276.276] (II) intel(0): clock: 76.9 MHz Image Size: 256 x 144 mm
[ 41276.276] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1644 h_border: 0
[ 41276.276] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
[ 41276.276] (II) intel(0): Supported detailed timing:
[ 41276.276] (II) intel(0): clock: 51.3 MHz Image Size: 256 x 144 mm
[ 41276.276] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1644 h_border: 0
[ 41276.276] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
[ 41276.276] (II) intel(0): Unknown vendor-specific block 2
[ 41276.276] (II) intel(0): EDID (in hex):
[ 41276.276] (II) intel(0): 00ffffffffffff004ca3533900000000
[ 41276.276] (II) intel(0): 00160104901a0e780a91e59359568e28
[ 41276.276] (II) intel(0): 1d505400000001010101010101010101
[ 41276.276] (II) intel(0): 0101010101010e1e561651000c303020
[ 41276.276] (II) intel(0): 25000090100000190914561651000c30
[ 41276.276] (II) intel(0): 30202500009010000019000000000000
[ 41276.276] (II) intel(0): 00000000000000000000000000000002
[ 41276.276] (II) intel(0): 000c4cff0a -
Hi; I have a 2.16 with an Apple mini DVI to VGA adapter trying to connect to a LCD display through a Belkin KVM. The problem is that the desktop will show up on both monitors momentarily then go blank (both), after a few seconds the MB display will come on at a different resolution and the external display will show "No signal". A few seconds later they will both come back on at a different resolution and then immediately go blank again. This goes on until the DVI connector is pulled.It goes through many different combinations of settings. I think (a dangerous thing) that for some reason the MB and external monitor can't resolve the proper settings and so just goes into a loop of check and reset. My question, is it possible to set a default setting for any external monitor connected so that the two will sync? I have a 1.8 G5 connected also and it has no problems although it is a different situation.
Hi,
I sometimes have problems with my KVM switch too. I have a Dell E172FP Monitor.
In certain scenarios when I change from my PC to Mini the resolution goes to pot. The way I get round it is to do the following :
1. Go to system preferences
2. Go to Displays
3. Click 'detect displays'
It then restores the screen to the proper resolution. It's a bit of a pain. It's almost as though the mac forgets what is connected to it and defaults to facory settings or something.
What KVM switch are you using? I've got a Belkin. Maybe it's got something to do with that too.
Hope this offers some help.
TMan -
KVM switch and Mavericks don't play well together
I upgraded to Mavericks yesterday, and started having this very annoying problem with my KVM switch, which used to work fine with Mountain Lion. I've been using this KVM switch for my mac mini and PC, in order to share my keyboard and mouse, very stably for several months.
Basically, when switching back and forth, there is a chance that ALL the peripheral devices would stop working in Mavericks. This includes my apple bluetooth keyboard and the magic touchpad, which are not related with USB (or maybe the bluetooth chip is still hooked up via USB inside).
For some reason, screen sharing stops working too, althought the IP I was trying to connect to was the ethernet port.
If I try to do a shutdown -r now via SSH, the system tries to shut itself down, but would get stuck with a spinning animation on the screen.
There is nothing in the system log, no error message.
My KVM switch is an IOGear GCS42UW6. Connected USB devices are: Apple USB keyboard and Logitech G500 mouse.10.8 worked well with my Mac Mini (2009) connected to IOGEAR KVM model GCS1108. My mouse is from Redmond and the keyboard is a Goldtouch.
Mavericks has a problem with my KVM switch as well. It seems to be a USB problem.
Case 1: The Mini's video is connected to the KVM switch -- mini DVI port to DVI. If the KVM USB cable (known good) is connected, the Mini chimes at boot but no grey Apple logo appears. LCD remains blank white. Boot does not progress.
Case 2: The Mini's video is connected to the KVM switch, as before. If the KVM USB cable is NOT connected, the Mini chimes at boot, the grey logo appears, and boot proceeds normally. Video is fine. I then connect the KVM USB cable to the Mini and use keyboard and mouse. KVM switching works as expected.
If the KVM USB cable is NOT connected but a keyboard and mouse are connected directly to the Mini, the boot sequence is normal. Video works.
The problem is not the hardware, all of which worked well with 10.8 (Mountain Lion). I would downgrade if Apple made 10.8 available from the App Store. -
KVM switch w/ usb i/o for keyboard mouse doesn't work [Solved]
Edit:
This problem appears to have magically disapeared. I'm still not sure why it happened or why it has ceased.
Hello Everybody,
I'm not sure why this is happening, but I've got a KVM switch that used to get "automagically" detected as "a no-brand KVM switch" on boot-up that has ceased working. I don't get this "no brand KVM switch" detected on boot-up anymore, but I can use the VGA part of the switch, at least, however the keyboard and mouse don't work unless plugged directly into the computer.
Below I've attached the result of
dmesg | grep --context=3 usb
dmesg | grep kvm
returns no result.
The most signifcant thing seems to be:
usb 1-2: new full speed USB device using uhci_hcd and address 7
usb 1-2: device descriptor read/64, error -71
usb 1-2: device descriptor read/64, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 8
usb 1-2: device descriptor read/64, error -71
usb 1-2: device descriptor read/64, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 9
usb 1-2: device not accepting address 9, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 10
usb 1-2: device not accepting address 10, error -71
hub 1-0:1.0: unable to enumerate USB device on port 2
I've googled this, and somewhere it was suggested this mean the usb device is not drawing power. The only thing that has happened that I can imagine as being the culprit between function/dysfunction here is that there was a power outage (circuit breaker tripped), and though my computers were on battery-backup, the monitor is not. I don't suppose that this could have messed up the switch?
Note this problem is uniform across 3 computers, 2 which have recently run a system update, but the 3rd has not recently run an update, this is not an Xorg problem, "K and M" don't work in either console or X.
Any help would be appreciated. Below as, mentioned previously, is the output of
dmesg | grep --context=3 usb
included on the off-chance that someone sees something significant there.
ata1.00: configured for UDMA/100
ata2.00: ATAPI: HL-DT-ST RW/DVD GCC-4480B, GW02, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA WDC WD400EB-11CP 06.0 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4480B GW02 PQ: 0 ANSI: 5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
huhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using uhci_hcd and address 2
usb 1-2: device descriptor read/64, error -71
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa7fc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
hub 1-0:1.0: unable to enumerate USB device on port 2
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: device descriptor read/64, error -71
usb 1-2: device descriptor read/64, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 4
usb 1-2: device descriptor read/64, error -71
usb 1-2: device descriptor read/64, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 5
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
usb 1-2: device not accepting address 5, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 6
usb 1-2: device not accepting address 6, error -71
hub 1-0:1.0: unable to enumerate USB device on port 2
usb 3-2: new low speed USB device using uhci_hcd and address 2
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:01:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e100 0000:01:08.0: PME# disabled
e100: eth0: e100_probe: addr 0xff8fe000, irq 20, MAC addr 00:07:e9:50:88:58
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
usb 3-2: configuration #1 chosen from 1 choice
Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Intel ICH 0000:00:1f.5: setting latency timer to 64
usbcore: registered new interface driver hiddev
input: Logitech USB Optical Mouse as /class/input/input2
input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
intel8x0_measure_ac97_clock: measured 50831 usecs
intel8x0: clocking to 48000
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input4
reserve_memtype failed 0xf0000000-0xf8000000, track write-combining, req write-combining
X:2394 freeing invalid memtype f0000000-f8000000
X:2367 conflicting memory types f0000000-f8000000 write-combining<->uncached-minus
reserve_memtype failed 0xf0000000-0xf8000000, track write-combining, req write-combining
X:2395 freeing invalid memtype f0000000-f8000000
usb 1-2: new full speed USB device using uhci_hcd and address 7
usb 1-2: device descriptor read/64, error -71
usb 1-2: device descriptor read/64, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 8
usb 1-2: device descriptor read/64, error -71
usb 1-2: device descriptor read/64, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 9
usb 1-2: device not accepting address 9, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 10
usb 1-2: device not accepting address 10, error -71
hub 1-0:1.0: unable to enumerate USB device on port 2
Thanks again!
Last edited by pseudonomous (2008-12-30 23:57:47)i'm sorry, but this is all software related then. if you haven't already, run disk utility a few times to try to correct the error. otherwise, you should back up your info immediately if you can. if you can access another mac you can do that with firewire target disk mode. http://docs.info.apple.com/article.html?artnum=58583. the other mac has to have built-in firewire. then you can try to repair the directory with a third party utility like diskwarrior or techtool pro. if it cannot solve the problem, or if you do not want to spend the money on the software, you have no choice but to erase and install your operating system. do you already have your info backed up?? it's always a good idea. keep us posted as to how it's going for you or if you have any further questions. [ 8 ) ]
-
Belkin Flip KVM Switch and Blue Screen
G5 Dual 2ghz, clean install of Leopard.
I have a dual head video card, attached to the DVI port is a 22" monitor connected via DVI, on the ADC port I have ADC to VGA adaptor which a Belkin "Flip" KVM switch is attached, leading to a 17" monitor.
On booting I get to the point when the Finder should be loading and get a blue screen on both monitors, the monitors both periodically do a fade from black as though the system has just tried to change video resolution. However this loop continues.
If I remove the KVM and have the 17" plugged in, boot up is fine. This set up worked fine with 10.4x.
Any suggestions.
ThanksZork, have you cracked this problem yet?
I have a similar item - Belkin's Switch2 for Mac mini - and I get the same halting at the blue screen. Belkin UK's 2nd line support failed to replicate this error and replaced my device with the one that they used. It failed as well on my system (which works fine without the Switch2!).
In case it helps, a dig in the logs showed the following fault repeating itself presumably while the screen stayed blue:
(starts 6 lines down, I think)
01/05/2009 10:12:25 com.apple.SystemStarter[29] kextload: /Library/Extensions/VBoxDrv.kext loaded successfully
01/05/2009 10:12:25 com.apple.SystemStarter[29] Loading VBoxUSB.kext
01/05/2009 10:12:25 com.apple.SystemStarter[29] kextload: /Library/Extensions/VBoxUSB.kext loaded successfully
01/05/2009 10:12:25 com.apple.SystemStarter[29] Loading VBoxNetFlt.kext
01/05/2009 10:12:25 kernel vboxdrv: fAsync=0 offMin=0x1230 offMax=0x39450
01/05/2009 10:12:25 kernel VBoxDrv: version 2.1.4 r42893; IOCtl version 0xa0009; IDC version 0x10000; dev major=18
01/05/2009 10:12:25 ReportCrash[110] Formulating crash report for process WindowServer[68]
01/05/2009 10:12:25 com.apple.SystemStarter[29] kextload: /Library/Extensions/VBoxNetFlt.kext loaded successfully
01/05/2009 10:12:26 com.apple.launchd[1] (com.apple.WindowServer[68]) Exited abnormally: Floating point exception
01/05/2009 10:12:26 kernel VBoxFltDrv: version 2.1.4 r42893
01/05/2009 10:12:27 kernel AirPort: Link Up on en1
01/05/2009 10:12:28 ReportCrash[110] Formulating crash report for process WindowServer[116]
01/05/2009 10:12:28 com.apple.launchd[1] (com.apple.WindowServer[116]) Exited abnormally: Floating point exception
01/05/2009 10:12:28 com.apple.launchd[1] (com.apple.WindowServer) Throttling respawn: Will start in 9 seconds
01/05/2009 10:12:30 ReportCrash[110] Saved crashreport to /Library/Logs/CrashReporter/WindowServer2009-05-01-101214GottaLight-2.crash using uid: 0 gid: 0, euid: 0 egid: 0
01/05/2009 10:12:30 ReportCrash[110] Saved crashreport to /Library/Logs/CrashReporter/WindowServer2009-05-01-101227GottaLight-2.crash using uid: 0 gid: 0, euid: 0 egid: 0
01/05/2009 10:12:38 ReportCrash[121] Formulating crash report for process WindowServer[120]
...and repeats it every 9-10 seconds.
Do/did you get this as well?
Can anybody comment on what is going on, please? -
How to use a KVM switch with a Pavillion 23
I have a Pavillion 23, and it has no VGA port, but it does have a USB port.
I have another machine that is not an all in one pc, and I was hoping to use a KVM switch to use the Pavillion 23's video monitor capabilites, and just toggle between it and my other machine. I have a USB to VGA converter. Can this work? Will this create some sort of infinate loop? I have a sneaking suspicion that I need a 2nd usb to VGA converter. Am I right?Hi,
This will be the out port, not in port therefore you can't use the 23" monitor.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
A discussion of DVI KVM Switches
Hi Gang
I have an APPLE Cinema Display 20" LCD A1081 MONITOR with two Power Mac G5's.
I researched DVI KVM switches, and tried out an Iogear Model GCS1762;
http://www.iogear.com/product/GCS1762/
With DVI, (as opposed to VGA), there is a neccessity for a 'hand shake' between computers, as it tries to figure out what to do. The Iogear doesn't connect instantly, consequently producing glitches, lines, video noise for a few seconds before it clears up when toggling back n forth.
Gefen on the other hand, apparently realizing this issue came out with something called a DVI detective; http://www.gefen.com/kvm/dproduct.jsp?prod_id=4714
They also make a (probably better) switch;
http://www.gefen.com/kvm/dproduct.jsp?prod_id=5040
Has anyone had any experience with either of these?
Thanx
MikeI've gone thru several between work (2 offices) and home and after using different models and having them die or exhibit difficulties with new larger monitors, I've been happy with the Belkin KVMs that I've had for the last couple years. But I foresee a possible problem with the wireless part. I think you'd better put out a call for reports on success/foibles using a KVM and wireless mouse/keyboard. What I'm not sure about is how the computer will react to losing contact with wireless and then getting it back again.
-
Recommendations for DVI KVM Switches?
I wish to share the same USB wireless keyboard/mouse, and monitor between my Macbook and PC.
Has anyone tried this with a DVI KVM switch, and can you recommend which one to use? They're a little pricey, so I'd like to get comments from actual users if possible...
Thanks
MacBook, Black, 2GB RAM Mac OS X (10.4.7)I've gone thru several between work (2 offices) and home and after using different models and having them die or exhibit difficulties with new larger monitors, I've been happy with the Belkin KVMs that I've had for the last couple years. But I foresee a possible problem with the wireless part. I think you'd better put out a call for reports on success/foibles using a KVM and wireless mouse/keyboard. What I'm not sure about is how the computer will react to losing contact with wireless and then getting it back again.
Maybe you are looking for
-
i tried putting some picture on my computer today and i could not find iphoto..some how got deleted off my computer..my computer came with 2 cds.would i need to use those to have i photo back?
-
Is anyone else annoyed with how Flash Builder 4 runs? Stuff I hate: I hate the new Package Explorer. Why isn't it alphabetical?...dumb. I hate the twirl downs on in the Package Explorer that show the methods and such of a class. This is what the Outl
-
Change PHY Mode, max speed is 54mbps
Hi Guys One of my partners is having trouble configuring his first AP-1042 in standalone mode. Having some issues configuring our first AP-1042N. I am not sure how to change the PHY mode; it seems to be currently set to 802.11a and are only achieving
-
Issues deploying to Glassfish - Cast exceptions (DefinitionContextAgeable)
Hi there, hope you can help me JDev 11.2.3.0 with Glassfish 3.1.2.2 I used ADF Essentials and all works fine for a small fast application I made. But I'm working on a bigger project (without using features not included in ADFE). All is configured as
-
Tecra S2 crash when dynamic CPU mode activated
I have problem with my Tecra S2. My Tecra S2 is crash after a few second after logon to OS if dynamic CPU frequency mode is activated, but this problem doesn't occur if I set the CPU frequency to always low. I tried several operating system but this