MSI K7D MAster and ram?

I have a MSI K7D Master motherboard, with dual athlon mp2200+, i had 2 sticks of unbuffered 256mb PC2100 ddr in the 1st two slots all thsi while, and last week i got 4 sticks of 256mb PC2100 DDR ECC-Registered ram, and when i put all four in, and boot up, i get a beep sound and the system wotnt boot. when i remove the sticks from slot 3 and 4, and boot up it works. anyone know the problem here? All the sticks work, i have put every single one in slots 1 and 2 to test. and help would be appreciated.
thanks

i se 2 things.
1.
psu 18a 12v is weak for 2 cpu's if it runs them from 12v line.
if it does i do not know.
2.
pc2100 memory.
i bet those cpu uses 166fsb so yuo cant run fsb / dram ratio 1:1.
can cause instability on atleast k7n2.
try to get some pc2700 memory to test with.
some stores will give you a refund if the memlry dont wornk so check first.

Similar Messages

MSI K7D Master

Hi!
I've a friend who has a MSI K7D Master and it doesn't boot.
Probably he give me that mother board.
Since he bought it as stock, he has no warranty.
Is it still possible to get RMA?
How much do I have to pay for replacement?
I'm from Italy.
Bye

You need to contact Tech Support via calling them in your region or emailing from the main website...
This forum isn't moderated or read by MSI employees, the moderators here don't work for MSI, we're just volunteers and don't get paid for our time...
GL on getting a replacement!
Bonz

RAM type for MSI K7D Master?

Hello,
I am looking to purchase the K7D Master and I was wondering what kind of RAM to purchase for it. Can I use PC2700 DDR or will that just waste my money considering the clock speed of the board is 266MHz and the clock speed of PC2700 is 333MHz.
TIA
Axle

I just read in this thread that someone made the XMS memory work in the K7D Master L. Check out this thread:K7D Master L MPX boot issue
Too bad I did not know how to make it work 4 weeks ago... ;(
jim

Problems with Promise SX6000 and MSI K7D Master

There is a problem with Promise SuperTrack SX6000 controller and motheboard MSI K7D Master.
We use most fresh bios for both products - version 1.5 for motheboard and build 77 for controller.
With previous controller's bios version it can't be initialize and now after initialisation the bios of controller does not show up.
It seems to be like one of problems wich are described in controller's manual, but this problem can't be decided by user's hand, but only new version of bios, we think.
What you can help ?

No ways ?

K7D Master and the onboard audio.

Hello, Im new here but not new to the PC scene. I just purchased the above mentioned mobo for my game/file server and its running fantastic. But I cant get the ac97amd.inf file to install correctly. I cant get the onboard audio working at all, I install the exe installer and reboot when asked. Apon reboot the sound card still isnt installed and I cant find that inf file anywhere on the pc at all. I saw this mentioned once on these forums from doing a search but there was no clear answer as too how the person got it working.
Ill list the specs below:
2 AMD MP 2200+
1 MSI K7D Master mobo
1gb of PC2700 DDR ECC Samsung Ram
1 WD 8mb 40gb HD for the O/S
1 Maxtor 8mb 120gb for files (on promise card)
1 Maxtor 8mb 80gb HD for games (on promise card)
1 Promise ata/133 PCI controller card
1 Lite On 54x CDROM
1 GF2mx 200 video card
400w Antec PSU
So is there a trick to getting this working? I have tried the supplied driver on the cd, 1 from msi's website & 1 from amd's website w/ none of them working at all.
Any help would be greatly appreciated.

My on-board sound works fine...but i have it disabled for obvious reasons, (better audio via a sound card). I cant recall how I installed it, but it may need to be installed in a specific order like chipset then audio then whatever else...i cant remember but i know i had no problem at all installing it. Check out the manual, i know it has info on installing drivers in there.

MSI K7D Master L - CRC Problem

Hey gang.
I've been having some CRC troubles with my MSI K7D Master L. On most occasions, I cannot perform an install from either of the cd drives--eventually a CRC error will pop up. In addition, data on the hard disks (i.e. registry settings) dissapear or are corrupted. Which sucks. ...and you can imagine how my slightly corrupted windows install is performing :(. ?(
Here's my specs:
-AMD MB 2800+ Barton (Only one CPU installed right now)
-1024 mb of Kensington ram
-ATI 9700 Pro
-Bios Version 1.3 (latest bios for Master L)
-Enermax 431watt power supply
-Creative Audigy Sound card (onboard sound disabled)
Just for reference, I've ran all the diagnostics (memtest86, and that IBM hard disk checker) and no problems show up. Only the motherboard and processor are new... all of the components, cables, drives, etc. were working well before I poped in the new MB. Of course, I started fresh with a clean formatted drive for my windows install.
I've heard that my Enermax 431 is about a 10 on the blows-O-meter. Could this be the problem? I realize that my new AMD 2800MP is prolly pulling out a bit more juice than before.
I love this motherboard, and I know that CRC errors are pretty rare on the K7D (cough, unlike some other MBs), I'd hate to have to RMA it.
Thanks in advance ,
JonnyLongTorso

Replaced the Enermax 431 supply with an Antec 550 watt unit. Still getting the errors.
Any ideas?

MSI K7D Master AMD Dual Athlon MP

OK so I've completed my first Dual Athlon and I'm getting some varied results. here's the specs:
MSI K7D Master AMD Dual Athlon MP Motherboard ATX
Dual 2400+
Antec 350W
various NVIDIA video cards
Kingston 266/512 64X64 DDR
I first tried a Wildcat 5110 but got no video, 3DLabs tells me this mobo has not been tested and cleared by them, so heads-up don't go with this mobo/video combo.
I went to NVIDIA and got video, I set the system jumper to 133MHz. I got a RAM error, change sticks (I have several of the same kind) but get the same result. After several attempts the machine boots and I install WinXP.
Now it is hit and miss sometimes I get the RAM error and the machine just sits there, sometimes it boots but the mouse doesn't work other times it seems to boot fine but the programs (3D Studio Max / Brazil) will just quit for no apparent reason. I set the BIOS to to check the RAM on start-up, it finds no errors.
I really appreciate hearing any ides or from anyone who has attempted this sort of thing before.
Liquidman

Very cool thank you.
Well I got a call back from MSI customer service, they said try going to 'Advanced chipset' and change the 'AGP Fastload' from whatever it is to the opposite state (enable vs disable) I think the default is enable. I tried that, but it was the same if not worse. I reset the BIOS, set the fsb to 100MHz flipped the 'AGP Fastload' and that, of all things worked. Giving credit to the cs department - it did not work without changeing the Fastload state.
I got the 3DS Max/serverrunning and here are some statistics:
Rendered with Brazil, tons pf polygons, reflection and refraction.
Athlon 2500XP (non-Barton) 1gig unbuffered MSI KM4M:
3 hours 15 minutes per frame.
Intel P4 2.4 533MHz fsb 1 gig unbuffered MSI 845GE (northwood)
2 hours 54 minutes minutes per frame.
K7D Master 100Mhz fsb (non-Barton) 1gig unbuffered value ram.
1 hour 15 minutes per frame.
I will try the ecc registered RAM next week. If the results are this good with the jumper set to 100MHz I really looking forward to checking out the 133MHz...
Any suggestions on brand/configuration ?
Liquidman

K7D Master + 4GB RAM- New problem

Hi this is my setup:
Dual AMD Athlon MP-A, 2133 MHz (8 x 267) 2800+ Barton A2
Motherboard Properties
Motherboard ID   10/09/2003-AMD762-W83627-6A6S7M49C-00
Motherboard Name   MSI K7D Master (MS-6501) (bios v. 1.91- newest)
Front Side Bus Properties
Bus Type   DEC Alpha EV6
Bus Width   64-bit
Real Clock   133 MHz (DDR)
Effective Clock   267 MHz
Bandwidth   2133 MB/s
Memory Bus Properties
Bus Type   DDR SDRAM
Bus Width   64-bit
Real Clock   133 MHz (DDR)
Effective Clock   267 MHz
Bandwidth   2133 MB/s
Chipset Bus Properties
Bus Type   PCI
Bus Width   32-bit
Real Clock   33 MHz
Effective Clock   33 MHz
Bandwidth   133 MB/s
My problem is that the motherbord can see only 3670016k RAM with all 4 dimms plugged
I have checked by changing setup several times that all modules and slots are working.
I addictionally checked SPD, and found that all modulles are visible as 1024.
I use Transcend TS128MDR72V6A
Memory Module Properties form (SPD)
Module Name   Transcend TS128MDR72V6A
Serial Number   00011DA2h
Module Size   1024 MB (2 rows, 4 banks)
Module Type   Registered
Memory Type   DDR SDRAM
Memory Speed   PC2100 (133 MHz)
Module Width   72 bit
Module Voltage   SSTL 2.5
Error Detection Method   ECC
Refresh Rate   Reduced (7.8 us), Self-Refresh
Highest CAS Latency   2.5 (7.5 ns @ 133 MHz)
2nd Highest CAS Latency   2.0 (10.0 ns @ 100 MHz)
Memory Module Features
Early RAS# Precharge   Not Supported
Auto-Precharge   Not Supported
Precharge All   Not Supported
Write1/Read Burst   Not Supported
Buffered Address/Control Inputs   Not Supported
Registered Address/Control Inputs   Supported
On-Card PLL (Clock)   Supported
Buffered DQMB Inputs   Not Supported
Registered DQMB Inputs   Not Supported
Differential Clock Input   Supported
Redundant Row Address   Not Supported
I have also foud that info from chipset is wery strange- showing some non existing 5-th memory slot.
This is the info
Chipset Properties
Motherboard Chipset   AMD-760MPX
CAS Latency   2.5T
RAS To CAS Delay   3T
RAS Precharge   3T
RAS Active Time   6T
Memory Slots
DRAM Slot #1   1024 MB (Registered ECC DDR SDRAM)
DRAM Slot #2   1024 MB (Registered ECC DDR SDRAM)
DRAM Slot #3   1024 MB (Registered ECC DDR SDRAM)
DRAM Slot #4   512 MB (Registered ECC DDR SDRAM)
DRAM Slot #5   256 MB (Registered ECC DDR SDRAM)
There should be 1024 MB module indicated in slot #4 - but insted there is some s....
What can be wrong? I'm getting mad cause This Transcend modules cost me a fortune - and i bought it cause i really need it... all four!!!

This is from the Tyan mainboard web site
http://www.tyan.com/products/html/tigermpx_spec.html
* Note: The AMD-760 MPX requires a portion of memory to be reserved for PCI devices. Allocation for these devices is dependent on the number of PCI devices installed, and option ROM for each device. Common configurations will see 3.5GB to 3.8GB of available memory.
Several brands of mainboard say this unless they support more than 4GB.
MSI does not mention this on their web site or in the manual.
I suspect the only solution is to get a mainboard that supports 6GB or more.

MSI K7D Master-L & 3ware 7506-4LP boot hang

I recently purchased a 3ware Escalade 7506-4LP RAID Controller (IDE, 4 ports - see product info here) for use with my MSI K7D Master-L (MSI-6501-030 - see product info here) to replace my Promise FastTrak100 TX4. On boot, the system POSTs fine, and then freezes solid at the point at which it should load the BIOS for the 3ware controller. I get nothing but a blank screen with a blinking cursor in the top left hand corner, and a hard reset (CTRL-ALT-DEL doesn't work) is required to to reset the machine. The diagnostic LEDs on the motherboard indicate it's freezing at the point where it is "Initializing IDE controller".
What I have tried:
- Verified BIOS on RAID card was latest version (1.08.00.048)
- Removed all PCI cards (except for RAID controller and video card)
- Adding 33 MHz PCI cards to 64/66 PCI slot to slow down bus
- Tried RAID controller in each PCI slot
- Flashed the motherboard BIOS to 3 different versions, 1.91, 1.82, and 1.5 (which the motherboard was validated for use with this card on - see here)
- Tried various BIOS settings (ACPI on/off, PCI Latency, etc)
- Disabled all onboard devices (sound, ide, fdc, serial, parallel, etc.)
- Detached all drives from card
- Tested card in another computer to verify it works - it does.
I have noticed some people on this forum have had similar problems with SCSI or RAID cards:
http://forums.2cpu.com/showindex.php?threadid=39696 The first post in this thread describes the problem I'm having almost exactly.
http://forums.2cpu.com/showindex.php?threadid=37755
http://forums.2cpu.com/showindex.php?threadid=46450
http://forums.2cpu.com/showindex.php?threadid=41381
Here's my sistem configuration as I'm attempting to troubleshoot:
MSI K7D Master-L
2x Athlon MP 2200+
512 MB Samsung PC2700 CL2 ECC DDR SDRAM
ATI Radeon 9000 Pro 128 MB
3ware Escalade 7506-4LP
KDS Avitron AV-195TF Monitor
Microsoft Natural Keyboard Pro
If you have any suggestions, questions, etc, please let me know. I'm desperate on this one.
MSI K7D Master-L w/ Dual AMD Athlon MP 2200+'s - 512 MB Samsung PC2700 CL2 ECC Registered DDR SDRAM - ATI Radeon 9000 128 MB - ATI Radeon 9000 PCI 64 MB - Hauppauge WinTV-PVR - 3ware Escalade 7506-4LP - 4x Western Digital WD1200JB (RAID 5) - Hitachi GD-2500 BV+ 5x DVD - LG GSA-4040B DVD-RW - Sound Blaster 5.1 DE - Addtronics 7896A Case - Enermax EG465P-VE PSU - 3x KDS Avitron AV-195TF Monitor - Microsoft Natural Keyboard Pro - Microsoft Intellimouse Explorer 3.0 - fUnc sUrface 1030 Mouse Pad

Any luck with this issue yet, I have been trying to get some help from MSI tech support, but no replies to my email.

Logitech cordless optical mouse & MSI k7D-master

Hi,
just wanted to know if someone is using a logitech cordless and optical mouse around and a MSI
K7D-MASTER???
I bought one last week and put it to work, pretty nice invention I said!!!!!
it was functioning pretty well, comfortable i´d say, until that moment!!!!!!!!!!!!!!!!!!!!!!!!!! ;( :O X( 8o ?( X(
X( ;( ;( ;( ;( ;( ;( ;( ;(
The moment i decided to install the st*pid software bundle it has!!!!
MOUSEWARE 9.41.1 (windows) for Microsoft Windows:
XP, Me, 2000, 98, 95, NT 4.0
this machine runs 2 processors (athlons MP)& Wxp PRO.
I installed the software like i always do it ( put it into my cdrw and appeared the install screen) i was prompted to install the mouse software & music match too, i did it.
My machine is as follows:
K7D MASTER-L
2 Athlons MP 1600+
1024 Mb ddr ecc registered Kingston
4-80 Gb IDE barracuda 7200 rpm UATA 100 (0+4)
1-19 gb SCSI barracuda 7200 rpm ultra 160
Adaptec SCSI card 29160
Pomise Fast track 100 RAID card,0,1,0+1,JBOD
Geforce 4 Ti 4400
Sound Blaster Audigy Platinum (shuld listen how it sounds!)
Nec USB 2.0 card
Creative Encore dvd decoder card
2 Lite On cd rw 32*12*40
1 hp scsi 9600 cd rw 12*8*32 external
1 creative dvd 12 encore (reg 1 set)
Intel SC-5000 SERVER CASE (modified)
Pinnacle DV 500 DVD video capturer
Cirrus Logic serenum external modem
WinXP PRO
Linux Suse 8.0 (dual boot)
Then i was prompted to restart my machine....i did it.
then the post, the fasttrak bios, the scsi card bios, everything that my machine runs before starting..........finally the WINDOWS XP PRO screen booting up...........then suddenly a BSOD (blue screen of death), telling me that it was stopping due to new installed software or hardware, blah, blah blah stop at code 0x93c3487…. !!!....................................... ......................... 8o 8o 8o 8o 8o 8o ?( ?( ?( ?(
what the hell??????????????!!!!!!!!!!!!!!!!!!!
restarted my system and entered in safe mode..........run uninstall mouseware and everything i installed.
again the post, the fasttrak bios, the scsi card bios......booted up and enter in windows like i normally do.
I wanted to restart my system once and did it, but when it restarted a small st*pid window suddenly appeared telling me i have lost my profile just like this:
"Windows cannot load your profile because it may be corrupted. Contact your administrator. "
“Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off”
“seconds until you are logged into a temporary profile…………30,29,28,27,…..,2,1,0”
it logged in ……………………all my icons, where were them????????
My programs, my work ?????????????????????????!!!!!!!!!!!!!!!!!!!!aaaaahhhhhhh!!!!
I was insane, insane, insane!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ;( ;( ;( ;( 8o 8o 8o 8o ;( ;( ;( ?( ?( 8o :O :O :O :O :O ;( ;( ;( ;( ;( ;( ;( ;( ;(
I decided to use system restore…..it functioned. I have everything back ) ) ) ) ) )
I think Wxp pro, 2 processors & mouseware from Logitech are not good combination!
Logitech: I won’t buy anything from them again, the box the mouse came in has a legend telling you: over 10 million Cordless mice Sold!! (Yeah, that´s right for uni processor machines, maybe)
I ´m still learning things about my dual processor machines: they do not like everything that is designed for uniprocessor machines!!!
A dual processor machine is something fast, more than one processor has to be better in many aspects. But again, not everything is designed for a dual processor machine.
Does anyone know how to back up your profile in Wxp pro????
Any comments are welcomed!!!

Before Installing CD drivers you should always check to see if later drivers are available. The 9.6x drivers have been out for ages so go and try them.
BIm2k

[nVidia] "K7D master" and "AMD Sempron3000+"

I got a "MSI K7D master-L" mainboard. with uppdated Bios. It's a "dual cpu" mainboard, with only one (1) "AMD Sempron 3000+" cpu.
I have tried everything, but can't get my Cpu to go faster than 1800Mhz. What am i doing Wrong ?
Annyone have a good advice for me?

Quote from: Holoas on 09-November-05, 20:59:55
I got a "MSI K7D master-L" mainboard. with uppdated Bios. It's a "dual cpu" mainboard, with only one (1) "AMD Sempron 3000+" cpu.
I have tried everything, but can't get my Cpu to go faster than 1800Mhz. What am i doing Wrong ?
Annyone have a good advice for me?
The board that you're using is for server systems. These mobo's doesnt have overclocking potencial and options cause of the need for stability.
So don't try pushing it. Your board may be like this

MSI K7D master L and Linux

I just recently got a K7D master L and I have been doing some research on the mainboard while waiting for the ECC DDR memmory to arrive. During my research, I found a series of messages to the kernel.org mailing list that concerned a 'southbridge' problem with the K7D when using a USB/serial mouse instead of a PS/2 mouse ( I only have USB mice now, but i do have the little green adapter to make them PS/2 )
My question regards the progress in correcting the issue(s), which i understand is(are) an AMD 760 MPX problem.
Is there a patch or BIOS update that can work around or correct this issue in the works?
-sb

Looks like I may have found my answer here in the AMD errata.
clipped from: http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/24472.pdf
Multiprocessor System May Hang While in FULL APIC Mode and IOAPIC Interrupt is Masked
Products Affected. B1, B2
Normal Specified Operation. The AMD-768 peripheral bus controller is designed to support FULL APIC mode in multiprocessor systems for system management events. If an interrupt is masked in the APIC controller of the AMD-768, then the corresponding interrupt message should not be sent to the processor via the 3-wire APIC bus.
Non-conformance. The AMD-768 peripheral bus controller will send an interrupt message via the 3-wire
APIC bus regardless if the interrupt is masked or not.
Potential Effect on System. Since the processor had previously masked the APIC interrupt, it is not
expecting to receive future APIC messages for the masked interrupt. The APIC controller will continuously send the interrupt message via the 3-wire bus until a processor accepts the message, causing the system to hang.
A system hang has been observed when executing a server shutdown command in Novell Netware versions 5.0 or 5.1 while using a serial mouse. During the server shutdown sequence, software writes an invalid CPU ID to the IOAPIC redirection table, and the system does not complete the shutdown.
Note:[/i] No failure has been observed when using a PS/2 mouse.
Suggested Workaround. None.
Resolution Status: No fix planned.
X(

K7D Master-L RAM Woes...

Hey MSI Crew,
Hope this posting finds you all well. I seem to be having a problem with my K7D Master-L MoBo that is driving me insane! Please help!
Here is the history of the problem (Sorry if it's long). I used to have a Tyan Tiger MPX dual CPU board. It had two AMD 2400+ CPUs, 1 GB of memory (ECC) and various cards (video, USB, sound). Well, one day I decide to open it to clean it. I had my air can and sprayed the dust away. I then pushed the power button and nothing. I then turned on the power from the back of the PSU and it started but no POST. Great... I fiddled with the board and no matter what I did, it would not pass POST. Blank screen.
What I realized started to happen was a flux of power on the board. You could hear the PSU rev up and down. I then replace the PSU. The new one is an ANTEC 550 BASIQ PLUS. Still no POST. Still reving.
I then go ahead and replace the Mobo. I got a MCI K7D Master-L. I put it into my box, attach everything and it runs steady. I had to get new memory because the sticks I had in the Tyan wouldn't fit. I got a Kingston 1GB 266MHz DDR Non-ECC CL2.5 DIMM PC-2100 ValueRAM. When it ran, everything worked: fans spinning, lights on CD/DVD-ROMs blinking BUT still no POST. Blank screen... Stripped down to basic and still no POST.
I then look at the D-Bracket lights and I see "Red Green Red Red". I look in the manual I downloaded from the MCI page and it states: "Memory Detection Test - Testing onboard memory size. The D-LED will hang if the memory module is damaged or not installed properly." It is brand new. I'm not sure if it is Registered or not. I do know the manual says that the MoBo requires: 184-PIN 2.5v DDR DIMM PC2100 DDR SDRAM (8 memory banks)."
I thought that this RAM was good enough. I have read on this forum that this board can be picky when it comes to RAM. PLEASE HELP! I really want this to work! Thanks everyone!

OK, so now I'm between and
I received the memory from Crucial yesterday and installed it into my K7D Master-L. I close my eyes, pray for a second, turn on the power and... nothing. It is still showing red green red red. No POST. This is what I've done so far:
*Cleared CMOS (Nothing)
*Change from 100 to 133 and back for memory (Nothing)
*Tried all slots for the memory (Nothing)
*Unplugged power supply so no juice was going to the computer and plugged it back and started (Same result)
The only thing now is that when I start the computer, I get a series of beeps (sporadic, not a real sequence) in the beginning and then becomes less as time goes by (a few seconds). I'm not sure if that's progress or not...
I don't know what else to do. I want to go from to Please help me!

MSI K7D master L

Have just purchased K7D master L mobo + 2 x AMD 2800+ procs with 2 x 512mB reg memory.
The problem i am having is that if i completely shutdown ie: pull the power plug from the power supply, mobo will not boot, even the fan on the power supply will not work, but if i reset the cmos battery, everything boots with no probs.
Brand new power supply has been fitted, 520w Hyperpower.
Any ideas please!!!!

http://www.theinquirer.net/?article=9331
the mp 2800 is a 266 fsb cpu,the 2800 thrbrd is a 166 fsb cpu
so you should be ok if the boards bios is up to date
im afraid i cannot get the msi site to load
and i see you now have ram speeds etc in your signature
this psu ,i can find nothing on it in goggle
how much was it as there are many junk 20 dollar so called 500 watt psu now
none of which i would trust to deliver

K7D Master and Adaptec 2100S RAID not working

I have the K7D Master with 2 AMD 1900+ MP cpu's and 1 GB RAM. I can not get the Adaptec 2100S RAID SCSI card to work with this mainboard. I have taken out all of my PCI cards, and I have tried to place the 2100S in all of the PCI ports, but the card will not work. It seems that the bios of the K7D do not like the bios of the Adaptec card. The Adaptec works fine with the K7NPro motherboard, so it is nothing wrong with the card. I have just bought 2 x 15.000 rpm scsi disks, and I was really looking forward in having SCSI RAID with this excellent motherboard.
Does anybody have the same problem, or does anyone have a solution - it will be highly appreciated.

I am using anAdaptec 29160N with 3 scsi drives and this works like a charm. It is just the Adaptec 2100S which doesn't work, and the problem is related to the AGP port. I tried to remove my AGP card and installed a PCI video card - then suddenly the 2100S worked. It was assigned an IRQ and I could also get inside the bios/menu of the card.
I therefore decided to test different AGP cards - I tried Creative Banshee (3DFX chip), Creative GeForce 2 Ultra, Leadtek GeForce 3 Ti 500 and 3DFX Voodoo 3. The Adaptec card would not boot no matter what AGP card I tried. The machine hangs when the bios of the Adaptec is showing. I then tried 3 different PCI video cards (Geforce 2MX, ATI Rage3D and Matrox), and the 2100S worked with all of them.
So it seems that the Adaptec 2100S will not boot (hangs during bios message) as long as the AGP port is being used on the k7D - the question is: can MSI come up with a new bios that resolves this problem or do I have to live without my 2100S ?

MSI K7D MAster and ram?

Similar Messages

Maybe you are looking for