MSI K7N2 Delta, D Bracket LEDs problem

CAn anyone tell me where to find out information on the D bracket. My new system wony start and it indicates a problem with the inializing of the floppy drive controller. I have so far tried 3 floppy drives and four leads.

Hi neusaap,
Are all the optical, DD5.1 software settings correct?...
I had also these problems, but only with MP3 files. I checked the settings, and muted the mic. line in, video I do not need. It's also important to ground your rig and receiver.
Take care

Similar Messages

HD Led not working with SATA drives on MSI K7N2 Delta

I noticed the HD led does not work with the SATA drives on my MSI K7N2 Delta ISLR
I confirmed that the led is not burnt out by reconnecting a spare IDE HD with XP on it to IDE 1 and the led worked when there was activity, but it does not work when connected to IDE3 or if the SATA drives are connected to Serial 1 & 2.
Could it be because the motherboard doesn't support and hdd led for the Promise SATA controller.
I had Bios v7.3 and flashed to v7.4 with no luck.
Could a new bios update fix this problem?
Anybody seen this before?

basically it not wired up so works for no one

Internet Connection Problem on MSI K7N2-Delta-ILSR

Hi, recently I buy an MSI K7N2-Delta-ILSR.I have a problem when I was trying to connect to the Internet through my modem on WinXP Pro SP1. It bring me up an error message 678 ( The computer that was tried to connect did not respond...). I have also a second hard disk with Mel windows. On disk the disk with the Mel I don’t have any problem with the internet connection. All my settings are same on WInXP pro and Mel.I have checked I thousand times. My computer configuration is:
Athlon XP 2400+ Overclocked to 2205MHz
2 memory modules of 256MB 400 manufactured by Samsung
TharmalTake Volcano 11
Triplex Xabre 400 PRO with 128MB
Hercules Gamesurrround Fortissimo III 7.1
Microcom InPorte Home modem 56k
Leadtek winfast 2000 (TV/FM radio)
Acard SCSI controller (Acard AEC-6710D) for my scanner
WesternDigital WD800 GB
WesternDigital 15.3gb
Bios ver.7.4
Can anyone help me?

Quote
Originally posted by Roger Wilco
Hmmmmm, I\'m also having a problem with the onboard lan of the K7N2 Delta.
I have an ADSL connection, and have an Alcatel SpeedTouch Home modem.
I pretty much get the same error as SiliconMan (The computer that was tried to connect did not respond...)
I ended up giving up on it for the time being, just using my SMC NIC. Would be quite interested in finding out what the problem is though.
Anyone else in the same boat?
Hi,
Your problem is not the same, SiliconMan is trying to connect with a dial-up modem not LAN. Your problem sounds like it may be configuration, do a search on this post, I'm sure you will find people with onboard LAN troubles. It's hard to troubleshoot though since you didn't provide any info about your computer. Good Luck
Rob

Msi k7n2 delta ilsr problem

hi i have this configuration on my pc:
antec true control 550 watts
msi k7n2 delta ilsr
kingston hyper x pc3700 2x512 mb
athlon xp 3200+
seagate 120 gb sata 7200.7 hd
ati radeon 9800 pro excalibur ice q
i have 2 problems : the first one is that sometimes windows display me a blue screen with certain problem related to ati2dg.dll i think that problem is beacause the video card so i decided to update the bios , in the live update page from msi says that the bios 7.6 fix a bug with ati vga cards but after flashing and updating to bios v7.6 that blue screen with the same error still appearing so i dont know what else to do to solve the problem and the second one is that when i start any game or make the processor to work a little mostly related with video stuff the case speaker start to beep and the pc lags until he restarts with no reason i really dont know why if u can help me thank you

Foxtrotccs,
In the BIOS try setting the AGP to 4X and disable Sidebanding. Then set the AGP Apeture to 256. See if that helps.
Make sure you are running the lastest nVidia nForce Drivers and the latest ATI Catalyst Drivers
Take Care,
Richard
P.S. There is still a possibility that the Kingston RAM is the problem.

MSI K7N2 Delta ILSR Memory problems

I'm trying to burn in a system in a 50 deg C (122 deg F) room for a minimum of 12 hours. The main system components are as follows:
Motherboard: MSI K7N2 Delta ILSR
CPU: AMD Athlon XP 2800+
Memory: 2x512 OCZ PC3200 EL
My problem is that the burn-in software continues to freeze up during the memory test. I've already contacted the software manufacturers and the software is stable. It's a problem with the way the motherboard handles the memory. I've tried putting the memory in dual channel configuration and changing the timing settings in the BIOS. The SPD settings are 2.5-3-3-7. Right now I have them at 3-4-3-8. It's a lot more stable than it was under the default settings but it still freezes up sometime after 7 hours. Unfortunately, I wasn't around when it froze so I don't know exactly how long it lasted. I can say that after 7 hours, it wasn't showing any slowdown in performance. If anyone could think of anything else I might be able to do to get the system stable, I would greatly appreciate it.

Thanks for the suggestions. The CPU FSB is 200, so it's already matched up there. And we have a ton of fans already. There are two in the front, 4 inside and 1 on the back. It's a custom case, 2u high. The power supply is oversized and more than adequate to provide the required power. I have four of these units running right now. Two with 2x512 sticks and two with 1x1024 sticks. For each combination, the memory clock speed for one is 166 and 200 for the other. I have been loosening up the memory timings trying to get the system stable, but it still isn't. If the power supply is good, and I'm unable to cool the system anymore due to limititions within the case, is there anything you can think of to stabilize the system. Maybe other settings in the BIOS or suggestions on how to go about getting good timings for the memory. Thanks.

MSI K7N2 Delta-ILSR MB Problems, Need Help ASAP!! PLEASE

Ok I just got this motherboard (MSI K7N2 Delta) Yesterday and after getting it setup I began overclocking the Processor (an AMD Athlon XP Barton Mobile 2500+) I was at 11x 215 1.750V Perfectly. I moved to 216 it started to seem unstable so I pushed the VCORE up to 1.775 and tried 217. It couldn't boot so I dropped it back down and decided ok 208 and a 11.5 multi might get me past the 2.4 mark which I was looking for. Well when I changed the Multi. to 11.5 and said save the system just sate as the flashing y for save. I could not change it to n I had already pushed enter So i firgured great and left it alone for a few minutes, nothing so I reset it. Now it refuses to boot/post. It spinds the fans the HD's the Network port is going but I get no picture. I have cleared the CMOS using the jumper I have removed the battery and power for over an hour and I still get nothing. I am assuming this is a BIOS error but I am not sure what to do to fix it. Does anyone here kno maybe, something I have yet to try something I can do? I would hate to RMA it and have to wait on newegg. Hell the thing is a day old. So please any idea's are welcome I have this posted on the Hard Forums as well but I am hopinh this forum may be more popular with getting help as no one is helping over there. Thanks!

Hi,
Cross: Just in case you are doing something wrong there's a clear CMOS guide here, follow it to the letter (and don't forget to put the FSB jumper to SAFE beforehand - there's a note about it in the guide).
How To Clear the CMOS
Your system board or CPU maybe not be dead yet - I had a similar problem with one of my boards and I tried everything - to cut a long story short I eventually got it working!!!
Btw, If you can't boot or get into the BIOS put your other CPU in (clear BIOS again after fitting!), so that you can prove whether your motherboard is working correctly!
Good luck! I'm off ta bed!
Axel

MSI K7N2 Delta-ILSR (MS-6570) BSOD problems grrr

I recently purchased this board and although it is an awesome product, I'm having a problem with BSOD's when I play a game for a certain period of time
Specs:
MSI K7N2 Delta-ILSR (7.6 BIOS)
AMD Athlon XP 2800+ Barton
512MB (2x256MB) Samsung PC-2700 DDR memory (2.5-3-3-6 1T)
MSI 128MB GeForce4 Ti 4200 (4X AGP)
NVIDIA nForce on-board sound
Western Digital 80GB drive w/ 8MB cache
MSI X48 CD/CD-RW/DVD combo drive
Windows XP Professional SP1
PSU:
Turbolink 420watt (came with case)
+3.3V is 28A
+5V is 40A
+12V is 18A
So what happens is I get a STOP error during the game that shows the kmixer.sys driver as the culprit. Sometimes it's accompanied by PAGE_FAULT_IN_NON_PAGED_AREA too. I read somewhere that kmixer.sys has to do with windows audio and that it's a 3rd party driver issue or a memory issue. I'm using the latest NVIDIA 3.13 nForce platform drivers. I ran Memtest lastnight for 12 hours straight and 0 errors. I'm thinking the memory may not be compatible with the board nor dual channel, is this possible? I have also tried several different drivers for both video and chipset including MSI's own and I still get the kmixer.sys BSOD when playing games. My previous motherboard was an MSI KT3 Ultra2-R (MS-6380E) which I had no issues with. Any help would be greatly appreciated. Thank you in advance.
--Update--
I just tried to play a game with audio disabled and it crashed this time with DRIVER_IRQL_NOT_LESS_OR_EQUAL with nv4_mini.sys as the problem. My IRQ table shows some sharing, but device manager shows no conflicts.

Ok I tried running the DTM-CB3 module which is nForce2 approved at 3-4-4-11 2T timings and experienced the same result even at 2.6 and 2.7v. I tried both in dual-channel and same thing happened. However, I downloaded a program called Prime95 and ran the CPU torture test and the system returned a fatal error within the first few minutes. CPU Temp was at 57 C and the warning beep (set to 60C though) sounded intermittentley which is strange. I let it cool down then ran the torture test again and about 5min. later the system either seized completely or the program crashed. IE has also crashed randomly on me. I did this several times, before trying a different FSB/DRAM ratio. So I left the system at 200 FSB and used a 6:5 ratio so my memory was running at DDR333 and processor was a 3200+. I ran Prime95 again and the system locked up just as it did the other times. So after I did this a few times with consistent results. I went back and set the FSB to 166 and tried a 5:6 ratio so the memory was DDR400 and processor was the normal 2800+. I ran it again and to my suprise it passed all the tests and after an hour of this, I tried a game and that was perfectly fine as well. I checked the temps and CPU was only 45 C this time. So I'm thinking the processor can't handle anything above 50C or it's just plain overheating. I ordered a Thermaltake Silent Boost HSF today which is tested up to 3400+ so this should fix my problem. If not, then I'm going to replace the memory with a 512MB Geil PC3200 golden dragon dual-channel kit.

MSI K7N2 DELTA -L (601-6570-020) nFORCE 2 DUAL 400 , RANDOM RESTART PROBLEM (WinXP,Win98)

Machine Specs:
- AMD Athlon XP 2600+ With L2 512 KB (Model 10)
- MSI K7N2 Delta -L nFORCE 2 Ultra 400 (601-670-020) (My AwardBios is updated to v5.7, Using nVIDIA`s O/B Audio and Ethernet Controllers)
- TwinMOS PC3200(CL2.5) 512 MB DDR400 RAM (Desktop Series)
- Samsung SpinPoint (SP0411N) 40 GB 7200 Rpm HDD
- GeForce2 MX400 64MB AGP 4x (Oem Manufacturer)
- Samsung SyncMaster 753s 17" Monitor
- Sony 52x Cd-Rom
- Philips Stereo Headphones
- Windows XP Home Edition Turkish (Service Pack 1 Turkish) , I did all of critical and other updates ,Totally up to date.Device drivers are too...(nForce 3.13 whql International,Forceware 56.72 whql International)
Problem :
- ERROR EVENT : 1003 ERROR NAME : IRQL_NOT_LESS_OR_EQUAL
Original Error Texts:
A problem has been detected & Windows has been shut down to prevent damage to your computer.
IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this Stop error screen, restart the computer. If this screen appears again follow these steps.
Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If the problem continues, disable or remove any newly installed hardware or software.
Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components restart your computer, Press F8 to select Advanced Start-up options & select Safe Mode.
Technical Information :
*** STOP: 0x0000000A (0x00000004, 0x00000002, 0x00000001, 0x804F1473)
Beginning dump of physical memory
Physical memory dump complete. Contact your system Administrator or technical support group for further assistance.
After restarting manually from the PC. I get the following message
The system has recovered from a serious error.
BCCode : a BCP1 : 00000004 BCP2 : 00000002 BCP3 : 00000000
BCP4 : 804F1ADA OSVer : 5_1_2600 SP : 0_0 Product : 256_1
C:\WINDOWS\Minidump\Mini042202-01.dmp
C:\DOCUME~1\DANIEL~1\LOCALS~1\Temp\WER3.tmp.dir00\sysdata.xml
And when I check EVENT VIEWER
Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 22/04/2002
Time: 5:55:03 PM
User: N/A
Computer: XXX-BOX
Description:
Error code 0000000a, parameter1 00000004, parameter2 00000002, parameter3 00000000, parameter4 804f1ada.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 30 30 30 30 30 30 30 0000000
0020: 61 20 20 50 61 72 61 6d a Param
0028: 65 74 65 72 73 20 30 30 eters 00
0030: 30 30 30 30 30 34 2c 20 000004,
0038: 30 30 30 30 30 30 30 32 00000002
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 30 2c 20 38 30 34 66 00, 804f
0050: 31 61 64 61 1ada
I installed 6 operating systems on my pc (WinXp Home Edition Turkish/English,WinXP Pro Turkish/English,Win98 Turkish/English) and tested it, but every time i meet the same thing (MS Blue Screen Of Death Sux...).I checked the WinXP`s logs and searched for error code`s meaning from microsoft knowledge database. They are saying nothing about this problem but the problem`s root is coming from a bad device driver. It seems to be a generic problem for all operating systems cuz all of them were restarting themselves randomly, before i close "auto-restart on critical errors" option.After i saw some messages on forums , i searched for my RAM maker`s home page then i learned that my RAM is assembled with VIA KT Series and SIS chips & optimized for them. I think nForce is too picky about rams.But i aint sure about where the hell is this problem coming from. If you guys are sure about that is an unsupported ram problem and knew the list of ram marks&models that supported by MSI K7N2 Delta -L ,please help me about this damn problem. Thanks for your help.
Note : I tried Asus Ati Radeon 9200SE 64mb g.adapter (some peoples told me thats about g.adapter), but problem continued.

If I read correctly in your specs I see only 11 Amps on the +12v Rail. Is this correct?
If so, I'd advise a PSU that has at least 18 amps on the +12v Rail, perhaps as low as 16 with the other rails to match as shown currently in your spec.
11 Amps is just way too underpowered for that rig. I am surprised it even boots.
At what point does the BSOD occur?

XFX GeForce 7600GS 512mb AGP with MSI K7N2 Delta Problem

Hi, I have been searching in everyplace and still I havent find a solution.
I have the XFX GeForce 7600GS 512mb AGP card.
I use the MSI K7N2 Delta.
My Processor its the AMD 2600+ XP
my PSU its a 420watt
my RAM its 2gb DDR 400
I made everything in the bios, didnt work.
I updated the lastest drivers and bios, didnt work.
I went to a friend house, he use a P4 motherboard with 500watts. Worked, PERFECTLY.
I changed the card once (the first one didnt worked at all) but this one worked...
now the question is:
HOW I MAKE IT WORK IN MY PC ?????????
Can anyone help me? I dont wanna sell it to a friend for only 60$ (that the only costumer I have found for the card in Panama)

Heh I had problems with trying to see again was what happening in my PC but yesterday....
Ok I went to my friend house, we used the card with his 350 watts 15A in the 12V+ and it worked.
Then we tried to install the PSU but I dont know why its 4pin was incompatible with mine....
Well heres the important part: I went to a local Computer Store where they repair too and with another more powerfull PSU in my PC and the card didnt worked for seconds, but the guy played a little with my Ram and he noticed that its posible to that be the problem. Remember that my ram its a Kingston 400DDR 2X1 Gb running in the purple and the green slots of the mobo. when we changed them to both purples slots of the mobo the PC dosent work and make a the beep sound. I have the braket in my computer and it showed a red dot here: GR
GG
Gonna search the manual to know what that means.

Problems with DMA (WinXP + MSI K7N2-Delta)

Hi!
I'm having problems with my IDE dvd-burner (NEC-1300) as I can't get it to use DMA in Windows XP. The motherboard is a MSI K7N2-Delta. I've tried using Nvidia's newest driverpack, 2.45, but in vain. The only mode I can use is PIO and it slows slows down the computer.
Thanks in advance!
Jussi Teppo

Quote
Originally posted by
wonkanoby
what drives make models in pc in detail
what else is on each ide
hows every thing jumpered
is it a modern 80 wire ide lead
On Primary Master I have a 60Gb Seagate Barracuda ATA IV. And the Secondary Master is the NEC-1300 http://www.necd.de/productdetail.php/id/672, which is supposed to be fully capable of UDMA-2 (33) as all the modern drives are (some are even UDMA66). The drive are jumpered as Masters. The wires are ok (UDMA100).
Registry editing suggested in a another message didn't work, neither did deleting the ide-channel.
I found a temporary solution to this: I placed the DVD-RW as Primary Slave and it works. The drive is detected as UDMA33-capable. Why it doesn't work as Secondary Master is beyond my knowledge.
Raven_
Yes, you guessed it. I do indeed live in Finland. Hur är läget?
Thanks to everyone for the effort!
Jussi Teppo

HD or Booting problem on MSI K7N2 Delta 2 Platinum

Hi all,
Ive a weird issue which i cant figure out myself. I've 2 HD's..lets call them A and B where A = 60Gb (Master) and B = 80Gb (Slave)
It's is like this:
A and B are connected to the primary IDE-slot. A will boot when set as Master and B wont start booting when set as Slave mode (i mean, it wont show/appear in the first hardware (detection) bootscreen of yer BIOS where it says its present or the so called POST-screen), but if I set B as Master only (A turned off) it will boot.
What also happens is if I disconnect the power of drive B..drive A will boot..and while OS is loaded...I turn on the powercable from drive B and reboot..suddenly out of the blue it detects both HD's and reboots like it should do normally...but when i reboot from than..the same thing happens again..(it wont recognize B anymore)
Sumtime it regonizes both drives and sumtime it just won't and sumtimes just 1 drive..
Another thing, when it won't recognize one or sumtime both drives...the POST-screen gets stuck at the name and version of the BIOS...and where it says: 'detecting IDE drives...' when it is at this stage..and I press on the DEL-key for example..it's loading damn too slow..I've to wait about 10min before it enters the BIOS-setup..
I am 100% sure I set the jumper correctly for Master or Slave mode on my HD..I know there's sumthing wrong..but don't know where...Ive changed the jumper with a new one ..switched IDE-cables...switched HD's (set B as Master and A as Slave and vice versa, knowing there is no active partition on B..but only to check if it recognizes the drive)..in all cases..the BIOS settings are set as default!
any1 can help me out with this?
It worked smoothly on my system till i noticed my second MEM bank of my mobo broke (Asus A7N8X-E)..so i had to change it quickly (and went to the store with my warranty to fix this board..it was only 3 months old) ..since I've seen/had enough Asus mobo's in my life I went this time for an MSI which looks better in my opinion...so now i have an MSI K7N2 Delta 2 Platinum..it works fine...except that HD issue mentioned above
any help would be appreciated..thnx in advance!
cheers!

Hi,
I've done that already several times...it doesnt work..any other suggestions?
Now I can boot normally when I disconnect the power of the 2nd HD (or just any HD)...when the os is loaded...I turn back on the power of the 2nd drive and reboot...than it will run/boot/restart etc..normally...this is the only workaround I have at the moment...this only works when the system is turned a long time...
My power supply is 400W..so I don't think Ive any prob with that
cheers

Strange phantom restarts on MSI K7N2 Delta ILSR

Just wanted to see if I could get opinions on this. My MSI K7N2 Delta ILSR mobo runs real nice now, but still, on occasion, very rare and intermittently, it will just restart. Not likely a heat issue, as the temps are nice and low. Also, not just happenning when I'm playing a game or anything strenuous. Did it once while checking email, once during install of an MS Office program, and once during a game. Could it be my old Gforce 2 MX 200 video card, as the picture sometimes gets wavy (like fine waves on an ocean), and the old computer it was in did similar things, or is it common with this mobo.
MSI K7N2 Delta ILSR
Athlon XP 2500+ Barton
1026 MB Kingston DDR RAM (2x512 Dual)
Gforce 2 MX 200 AGP 4x
WD 60 GB 7200 RPM

I had errors on test 4 not 5 with Winbond 2-512 Dual Channel called Hardcore Cooling and they said that getting errors with memtest86 may not mean that the ram is defective, it may not be compatible with the memory comtrol and they had me RMA it back. I also was not able to run the ram stable at there advertized rate of 6 2 2 2 it was only stable at 8 3 3 2.5
I replaced it with OCZ after talking to there Tech support people about compatiblety problems with the Nvidia chipset. Sense I installed the OCZ I only had one ram reboot and when I checked I was running the voltage at 2.5 and OCZ said that I should be running at 2.6. They also said that I could run it up to 2.8 with no worry.
Look on manufactor web site to see what ram timing yours should be running at and what voltage, Auto setting in Bios is not always the best setting.
If it still not stable at manufactor spec than I'd talk to who ever you bought it from about replacing it or refund and buy something thats on the Nvidia compatible list.
Most ram manufactors have a list of motherboards that there ram will work on but sometimes the newer boards like K7N2 or not listed yet as still working that out.

Kate needs HELP!!! MSI K7N2 Delta ILSR

Guys...
pls help me...
I am assembling, yes I know I am a techi girl...., msik7n2 with radeon9600 and 2xCorsair Value Select 256Mb DDR 400Mhz PC3200 mem...(hence 512mb)
I installed everything assembled it... booted and loaded fine for about 3 times...
and suddenly....
>power on
>no video
>no beeps
>after checking hard nothing happens...
>only thing I can tell is that the d bracket is indicating "memory section"
....d-bracket from MSI K7N2 Delta ILSR is 1,3,4 red and 2 green. Which is according the the manual "Memory Detection Test"-if the memory module is damaged or not installed properly.
Why woudl a memory suddenly not work?
I know I was adjusting bios for this and that....
I think just before this happened.. I adjusted something on agp setting... but what ahs that got to do with memory?
COuld it be the mobo or memory or the video card???
pls help....
My email is [email protected]...
please please help...
and guys in MSI what is your expert opinion? mobo? or memory?
Heeeeeeeeeeeeeeeellllp...
thanks...
Kate x

hi and welcome to this forum.
nice to se a girl here for a change
clear cmos jumper jbat1.
also try safe mode jumper j10 ans j11.
also try to reseat memory and dont trust the dbracket to 100%.
it can show wrong sometimes.
Quote
COuld it be the mobo or memory or the video card???
when you got it running then run http://www.memtest86.com to check memory,
also what psu do you have ?
post max amps on 3.3v 5v and 12v rails.
minimum is 28 35 16.recommended is higher.

Data corruption on MSI K7N2 Delta ILSR

Hi all,
Just got my new MSI K7N2 Delta ILSR up and running.
Got some issues with the memory running at 200mhz while the Barton core of my Athlon Xp 2600+ was running 166mhz, this had to be 1:1 (thx forum )
While running the default bios settings with cpu/mem at 166/166 fsb everything is stable as hell. I have been running Prime95 for 2 days now and using the system for dvd ripping/encoding, UT2004 gaming etc.
Then the overclocking began I'm using the standard AMD cooler that came with my boxed Xp2600+ so I didn't expect an FSB of 200mhz.
I stopped at an FSB of 190mhz...been crunching Prime95 for 18 hours now and again very stable.
Now comes the problem : Sometimes I get crc errors when installing a game or decrypting a dvd!! But how can this be? Prime95 is stable at this 190fsb overclock.
When using an FSB of 166mhz no data corruption or crc errors.
What can this be? It's not the cables because they're all the same as in my old setup which was running (ahum...walking) stable. PCI/AGP speeds are locked when overclocking...
Only thing I can think of is the power supply. I've read in a warning post from Bas that the Q-Tec 550w psu I have is crap. So my guess is PSU, but maybe it's something else I'm forgetting...Any suggestions??
The stupid thing is when I'm not overclocking I don't have the data corruption problems, but I'm still using the same crappy Q-Tec 550w PSU.
Help!
gr,
Remco

Hmmm, that's curious. On the MSI K7N2 Delta ILSR product page Kingston memory is recommended
Ok, did a Memtest86 v1.11 pass at cpu/dimm 166/166 - no problems whatsoever. I think using Prime95 would have revealed memory problems...but will do another pass with cpu/dimm at 190/190.
Can overclocking affect the Promise Raid Controller?? It should be locked like the PCI/AGP but who knows...
Well, I still have to replace my PSU but I'm not 100% sure that this is the problem. What PSU would you recommend? ...and I'm also thinking about replacing the standard CPU cooler, any advice is welcome
gr,
Remco

FLASH BIOS MSI K7N2 Delta-ILSR ????????

I am trying to flash the BIOS of my K7N2 Delta-ILSR board. I follwed all the instructions from the MSI Web but I can't get it going. I booted from Win ME & Win98 but could not get into C: drive. So I used Command Prompt from Window to get into the C: drive and follwed the Flash Bios Procedures. I keep getting the message: AwdFlash No Support WinNT/2000/XP OS
I got problem with the temp after I updated the BIOS. I wanted to flash it back to the old Bios. Please help me out
Thank you
My system:
WinXP Pro
MSI K7N2 Delta-ILSR
AMD 2500+
1 GB DR3200
Seagate 160 SATA

http://www.msi.com.tw/html/support/bios/note/ntfs.htm

MSI K7N2 Delta, D Bracket LEDs problem

Similar Messages

Maybe you are looking for