MSI K7N2-L usb 2.0 doesn't work with scanjet 4570c

I have a MSI K7N2-L motherboard with WINXP and SP1 that doesn't work with Scanjet 4570C if I set USB in BIOS to 1.1+2.2. Sometimes it locked up the PC or it showed streaks on the image. It worked just fine if I set to USB 1.1. Does anyone knows this is the problem with the MSI motherboard? I'm sure it was not the Scanjet since it is USB 2.0 supported, and I'd tried another Scanjet and the problem was still the same.

Quote from: Wonkanoby on 21-March-05, 21:14:07
If you are having problems with USB ports, read this topic.
besure you have only 8 wires connected no usboc
Nice topic!
But usb 2.0 DOES work with 1.3, 1.4 and 1.52 BIOSes. Only after updating to 1.5 official one of the front panel ports (not all 2) start works as 1.1

Similar Messages

Musket a3 USB 600 Scanner doesn't work with Yosemite

Hi there,
I have a Musket a3 USB 600 Scanner that doesn't work now that I have upgraded to Yosemite. Does anyone have a recommendation as to how I can use it? As Musktek aren't helpful and have told me they don't have a driver for yosemite... is there a way around this? Any help would be appreciated.

I found this and testing now.
http://www.canon-europe.com/Support/Consumer_Products/products/scanners/Others/P -215.aspx?type=download&language=&os=OS%20X%20v10.10

USB Bose Audio Doesn't Work & DVD/CD Ejects during startup 10.6.1

Anyone having this problem on the Mac Pro 8 Core
USB Bose Audio Doesn't Work, have to pull USB plug out and put it back in for audio to be recognised & DVD/CD Ejects during startup >>> 10.6.1

What is the ouput of cat /proc/asound/cards, aplay -l?
For an example:
[firekage@arch_desktop ~]$ cat /proc/asound/cards
0 [XFi ]: SB-XFi - Creative X-Fi
Creative X-Fi 20K1 SB073x
1 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xf6080000 irq 17
2 [U0x46d0x825 ]: USB-Audio - USB Device 0x46d:0x825
USB Device 0x46d:0x825 at usb-0000:00:14.0-7, high speed
[firekage@arch_desktop ~]$
[firekage@arch_desktop ~] aplay -l
card 0: XFi [Creative X-Fi], device 4: ctxfi [IEC958 Non-audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
[firekage@arch_desktop ~]$
I think that you have multiple sound devices and their boot order changes after each reboot.
Last edited by firekage (2014-06-20 13:13:05)

My external Apple USB Keyboard letters doesn't work, but the numbers do. Why and how can I fix this issue?

My external Apple USB Keyboard letters doesn't work, but the numbers do. Why and how can I fix this issue? Also, When I open the Keyboard Viewer, the letters will highlight only if I hold the modifier key(s) "Control" or "Control and Option". I really need help with this. I don't have any other computer to try it on, so I will have to test it on a friends computer sometime. But perhaps solutions that I can try right now? Thanks.

Hello there, IDuncan23.
The following Knowledge Base article has some great troubleshooting steps you can follow to work on resolving your keyboard issue:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Thanks for reaching Apple Support Communities.
Cheers,
Pedro D.

USB Flash Memory doesn't work !

Hi There.
my USB Flash Memory doesn't work and doesn't appear in disk utility. I also make sure that external disks are checked on Finder Preferences. and it's formatting to be worked with mac. it's work with my friend macbook pro. But Mine doesn't!!!
any help guys i'll be thankful
regards.

Which MacBook Pro do you have and which does your friend have? Do either or both of you have USB 3.0 ports?

My MSI KT3-ULTRA2 doesn't work with my CPU cooler!!

My MSI KT3-ULTRA2 doesn't work with my CPU cooler!!
I've got an MSI KT3-ULTRA2 mainbord, and I have a NEOLEC VENEZIA TB Cooler. But when I attach my NEOLEC cooler and I start the machine, the machine shuts down within a couple of seconds, and I get nothing to see on my screen. The weird thing is when I turn the PC on, the cooler starts rotating so it can't be broke, but then the pc shuts down i a couple of secs. So pleezze anybody help me!!
The weird thing is that I also have a coolermaster cooler, and that one works fine. But the problem is that this coolermaster is designed for AMD XP 1900+, and I ahve an AMD XP 2200+ that's why I bought the Neolec Venezia TB cooler.
Grtzz
skeleton

one easy thing to watch for... see if the heatsink or fan is in contact with any part of the motherboard, like... if it is too big and touches something that normally wouldn't be in contact with a fan or heatsink. If so, it could be shorting it.

MacPro eSata Port/Card doesn't work with new Hard Disk

I just bought 4 x 3TB Hard Disc http://tinyurl.com/d2rglvn (specs of disc)
Which I put in Macally Enclosures to work on my Barracuda internal Hard Drive externally http://tinyurl.com/clg8yjo
I already have like 5 x 1,5 TB that works perfectly well with eSata connections (with exact same enclosures)
**My problem is that my 4 new Hard Discs works really fine with my Mac Pro but only with the USB connections but won't work with the eSata Connection. I tried it on a MacBook Pro with an ATA to eSata adaptor and it works perfectly fine (So my discs are not the problem) **
I am working on a Mac Pro (bought in 2007) - Mac OSX 10,6,8 and this is (I think) the card where I put the eSata :
PCI Card :
pci1095,3132:
Type:    Other Mass Storage Controller
Driver Installed:    Yes
MSI:    No
Bus:    PCI
Slot:    Slot-2
Vendor ID:    0x1095
Device ID:    0x3132
Subsystem Vendor ID:    0x1095
Subsystem ID:    0x3132
Revision ID:    0x0001
Link Width:    x1
Link Speed:    2.5 GT/s
I am kind of new using Mac and its support so what want to know is :
Do I need to update my PCI Card ? If yes how can I do that ?
If not, what can I do to make my disc work ?
My disks are eSata III (6GB/s) is it compatible with my Mac Pro ?
Thank you Very Much for your time

Difference between the disk that works in eSata and those that doesnt is this....
Works : ** 1.5TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5"
Doesn't Work : **3TB, SATA III (6Gb/s), 3.5", 7200RPM, 64MB
it is probably the problem but i don't know what to do to fix it !

TS1253 I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

What have you tried?
You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network.

Apple tv mirroring doesn't work with ipad 2

Apple tv mirroring doesn't work with ipad 2 and last update achieved

you have to be sure that you have iOS 4.4 on your Apple TV. Apple pulled 4.4 due to problems and hasen't re-released it yet. the only way now is to hook it up to your computer with a micro USB cable and then in iTunes you should see your Apple TV and do a restore and it will then put 4.4 on the Apple TV but it will wipe out all your settings and you will have to do all that over again but mirroring will then work.

Apple Keyboard with number pad doesn't work with Mac Pro?

I have a Mac Pro, and have used an Apple Keyboard with a number pad (not bluetooth) with it for quite a while, with no problems. But then my keyboard broke and I ordered a replacement Apple Keyboard with a number pad (not bluetooth). This keyboard doesn't work with my Mac Pro. I have it plugged in, but I can't get the Mac Pro to consistently recognize that there is a USB keyboard connected to it. What magical stuff do I have to do to get the keyboard to be fit for purpose?

It would not hurt to try an SMC Reset. (But if it does not help, it adds credence to lllaass assertion that the keyboard is not working.)
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

Finding USB Wi-Fi antenna that works with 10.9.5

I recently purchased a MacBook Air 13in and upgraded to the 10.9.5 offered in the Apple Store on my notebook. The issue I am having is I can pickup a 1 bar signal in my room from the public Wi-Fi offered here but it's to weak to connect. A lot of people here have external USB Wi-Fi antenna and they say they work great but they also are using Windows OS. My roommate has one of these antennas and his computer is down right now so I tried to download the drivers for the antenna from the premier tek website where it told me to but it would not work, it would run the program but get no signal, not even when I was in close range of the public Wi-Fi. I just need help on getting the correct device to work. This is my first Apple product I have ever owned and I am very new to this also everything to do with networking. I am just a basic computer user! I would just like to be able to get the signal from my room to Face Time and such from the comforts of my room. Thank you for any advise!!

Welcome to the Apple discussions.
Asides from the end result of not being able to connect, what happens? When you try to connect, are there any system messages?
If you google 'usb wireless adapter mac' you'll find a number of useful references, should you want to go down that path.
As an aside, OS X Leopard, or 10.5, won't be released until later in the year, so users here can't tell you what works, or doesn't work, with it.

Need USB Wi-fi Card that works with G4 PowerBook on 10.4.8 & 10.5

I have a 12" Powerbook G4, 1.5 Ghz model.
The airport in the machine seems to dislike the Cisco wireless access points on my college campus.
All of the access points show up both in the Airport icon, and in iStumbler, however, i can never connect to them.
A fix for this would be most helpful, but I'll also settle for someone that can tell me of a USB Wi-fi card (preferably 802.11G, but i'll settle for B) that will work with my system.
Thanks!

Welcome to the Apple discussions.
Asides from the end result of not being able to connect, what happens? When you try to connect, are there any system messages?
If you google 'usb wireless adapter mac' you'll find a number of useful references, should you want to go down that path.
As an aside, OS X Leopard, or 10.5, won't be released until later in the year, so users here can't tell you what works, or doesn't work, with it.

Agilent board doesn't work with NI-488

I have an Agilent GPIB interface board, but it seems that it doesn't work with NI-488 software. I would like to know if there's a way to use these board with LabView because if it's not recognize by NI-488 software I can not use it in an application with Labview

As far as I know, NI-488 only works with NI's GPIB boards and other GPIB Interfaces.
I suggest getting an GPIB interface from NI. If you are looking for a cheap way to do this, try getting a USB-GPIB Interface. They are only $495. Also, ISA GPIB cards are only $395.
Alternatively, try installing the GPIB interface software for the Agilent board, and communicating with it through LabVIEW. Agilent may have a driver for this.

IPod Stuff doesn't work with my new iPhone

I finally sprung for the iPhone three weeks ago and I love it. But I think I'm going to have to buy more new stuff. Neither set of my portable speakers that I use with my iPod (5th gen. video) work with the iPhone. When I put the iPhone in the dock, I get some message about Airplane Mode. Music does play through the speakers, but they won't charge the iPhone. When I put the iPhone on its own charger and tried to use the auxiliary input on the speakers, there was only silence.
Do I need a special cable or something?
Also, my car charger for the iPod doesn't work with the iPhone.
Am I going to have to spring for another set of portable speakers? I've read that the Pure-Fi is compatible with iPhone.
Thanks!

Both my mini and my video iPod were USB -- not Firewire.
Both your Mini and your iPod with video synced via USB and charged via USB when connected to your Mac, but they also support charging via Firewire and most of the older 3rd party devices charged iPods via Firewire - your iPods include firewire pins in the connector for charging via firewire.
The first generation iPhone also syncs and charges via USB when connected to a computer, and the first generation iPhone also includes firewire pins for charging via firewire also, as your iPods include. The first generation iPhone does not support syncing via Firewire, but it does support charging via Firewire.
Apple removed the firepins from the iPhone 3G connector as they have done with all new iPods released after a certain date and for all new iPods to be released in the future. 3rd party device manufacturers were made aware of this so all new 3rd party devices must support charging via USB only or include charging via USB in addition to charging via Firewire if a new device is to be backwards compatible with older iPods.

Time machine still doesn't work with 10.5.2

After loading 10.5.2 I find that Time Machine still doesn't work with a new Airport Extreme Base Station (AEBS) and USB drive although I was reassured by my local Apple retail store that the fix was in the update. I should have known better. <Edited by Moderator>

Can you explain what archive and install is please?
I am having the same problem. Automator as soon as it starts crashes.
I have tried reinstalling from the OS disk, repairing permissions and none of them work.
Many Thanks
Dafydd

MSI K7N2-L usb 2.0 doesn't work with scanjet 4570c

Similar Messages

Maybe you are looking for