MSI K7N2G-L nothing but problems!!!!
I've been trying to get my AMD 2700+ to run in my K7n2G-L for over a week now. When I boot the CPU registers as a 1500+. There are no multiplier settings on MSI's website for the 2700+ for this board so I just stepped back and used the 2600+ settings to be safe. Then my board wouldn't post so I set the jumper to 100mhz and she posted again. It will register as a 2700+ in Safe mode (100mhz). But when I try to load an OS I get a BSOD. I've RMAed my CPU and my memory now so its has to be this board. Someone please help me out if you have any ideas! Thanks!
Antec 400w PS
AMD Athlon 2700+
MSI K7n2G-L nForce2 Chipset
MSI Ti4800SE 128mb
2 x Micron 512 DDR PC2700
I'd look at the PSU that you're using for the system first...do Wonka's formula for checking total power on the 3 main voltages then if that isn't the problem I'd RMA the board...just doesn't seem like a MB problem tho...
GL! 8)
Similar Messages
-
Upgrade to Firefox 4.0 has caused nothing but problems. Unable to click links, access websites, etc. How can I downgrade to previous version?
Check that the Bookmarks Toolbar is visible and that the "Bookmarks Toolbar items" is still placed on the Bookmarks Toolbar.
If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
* If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
* If you do not see the "Bookmarks Toolbar items" or other items that are missing in the toolbar palette or on a toolbar then click the "Restore Default Set" button
See also:
*http://kb.mozillazine.org/Uninstalling_add-ons
*http://kb.mozillazine.org/Uninstalling_toolbars -
Updated to Mountian lion 2 mnths ago had nothing but problems,I had no problems with lion, so i had a tech reinstall lion, Now agian I am having problems with the cursor freezing and disappearing in photoshop and not being able to use type in word, safari, mail, photoshop6 ,lightroom4 any suggestions as I don't believe apple is going to doing anything,thy've stuck thier head in the sand and ignored it.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
I have had nothing but problems after downloading Lion and turning on ICloud. Can anyone tell if I can delete photos from Photostream and if not why not! it is infuriating
PhotoStream is purely a conduit for transferring pictures added to or taken on one device onto all the others seamlessly. Photos are held there only for 30 days. There is no way of accessing, viewing or deleting individual photos; you can reset the entire Photostream, erasing everything.
http://support.apple.com/kb/HT4890 -
Nothing but problems with PDF Adobe reader
Hi
I've had nothing but problems for the past few weeks I'm sure it's maybe a new software version? I can't convert PDFs to Word anymore I keep getting this error message. An error occurred while trying to access the service for all documents.
It's slow at loading and I'm looking for a new program!Hi Mark,
Are you using Adobe Reader to access the Export pdf service to convert the file.
If so please update Reader to the latest v 11.0.10 and then check. Also make sure you are signed in with your Adobe ID in Reader.
Can you please also try signing in to the web url: https://cloud.acrobat.com/exportpdf with your Adobe ID and check if you are able to convert the file or not.
Regards,
Rave -
Nothing but 'Problem' message. Tell me how to leave ASAP. Piece of crap.
Just bought ExportPDF 30 minutes ago. Nothing but 'Problem' message. Please cancel immediately. Tell me how to leave ASAP. Piece of crap.
Hi John,
Please see my reply in your other post on the same subject: Please cancel immediately
I would be happy to cancel your subscription for you. Just let me know.
Best,
Sara -
Nothing but problems since switching out SIM card's at at&t
so lately, i've been having this strange recurring issue with my sim card. every so often the iphone will report that it is not installed even when it is in there, only way i was able to correct it would be to shut the phone off and turn it back on. it got annoying to the point where i took it too AT&T Yesterday and had the sim card's switched out.
Since then i've had nothing but problem's, i went home and my iPhone just started spitting out error's like crazy. It keept reporting "Accessory is not supported by the iphone, would you like to go into airplane mode to reduce sound quality? you will not be able to make or receive calls while in airplane mode"
To me that sounded like a problem with the activation process after AT&T switched out my sim card.
So I plugged in my iPhone into my computer, and it gave me more problems.. Window's was able to detect my iphone but it took FOREVER. I left it in there for two hours until it finally activated the phone.
After that scenario i thought it would be best to try and do a full restore on my iphone to see if that would help clear the lag, i hit the restore button and let the download finish.. then after itunes just hanged there for 3 hours and did nothing. so i had no other choice but to unplug the phone and try again.
Now when i plug the iphone into that same USB port I get 1 of two error's, more commonly i get an "itunes could not connect to iphone due to an unknown error (0xE80000024)" http://img35.imageshack.us/img35/8369/iphoneerror2.jpg
When i restart the computer and try to plug it into that same port i get this error "itunes could not back up the iPhone because a session could not be started with the iPhone" http://img13.imageshack.us/img13/4837/iphoneerror.jpg
If i try an other USB port it will connect and sync perfectly fine, but i cant do a restore to clear the lag issues, if i try it will just hang there. usually the only way i can "fix" this error is to re install window's entirely and start from scratch, which to be honest i'm really tired of doing..
anyone have any idea what could be causing these problems? I'm not positive it's the phone itself so i want to try and restore it before i go to an apple store with these problems..
itunes version 8.1.1.10
Iphone Version 2.2.1 (5H11)
Firmware version 2.30.03
Windows Vista 32 BitBased on your description of the problems before and after getting a new SIM card, and before attempting a restore with iTunes and the problem that occured when trying to do a restore, I would give AppleCare a call at (800) 694-7466, or make an appointment at an Apple store if there is one nearby ASAP.
-
3.1 firmware and nothing but problems
Since upgrading firmware to 3.1 i am having nothing but problems, battery life is now very poor and also it is taking 10 hours to charge phone from 0-100%. I am getting dropped calls and also call failed and hardly any 3g coverage at all even though i live in a big city. Is anyone else having the same problems and is 10 hours a long time to recharge an iphone?
Look at the recent posts and you'll see others are having similar problems. I suggest you restore as new, not from a backup and see how it runs when factory fresh, without any third party apps.
-
HT1338 How do I remove iOS 7 from my iPhone 4? Nothing but problems.
How do I remove iOS 7 from my iPhone 4. I'm having nothing but problems.
MDB63 wrote:
How do I remove iOS 7 from my iPhone 4. I'm having nothing but problems.
And which of the troubleshooting steps that are outlined in the manual have you tried? -
Had nothing but problems with M-firefox 4-can we go back to 3?
We have experienced nothing but problems since we changed to mozilla firefox 4. We are not very computer literate+liked the basic style of FF 3. We would like to go back to FF 3-could we enlist your assistance?
Credit Tony E
Firefox is highly customizable and you may be able to customize it to meet your needs.
If you do not like the new UI, you can make Firefox 4 look and behave more like Firefox 3.6, for details see http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data. See https://support.mozilla.com/kb/Uninstalling+Firefox
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use
your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of
installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles -
Nothing but problems since iOS 7.0.3
I updated to 7.0.3 this week. (iPhone 4) Since then my Phone has been nothing but problems.
Every time I open an app, I get the 'Please Connect to iTunes to recieve push notifications.' I have connected and it did nothing.
iMessage is flat out not working. Anyone with an iPhone cannot send me messages even with iMessage turned off. When I try to connect iMessage it times out and says 'Cannot Activate iMessage'. I have tried in multiple wireless networks as well as with WiFi turned off.
Nothing.
I have tried connecting the phone to the iOS diagnostics, with no sucess.
Really frustrating.
Anyone have any ideas?Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset. -
Nothing but problems since update from v5
Is there any way that I can uninstall iphoto 6 and go back to v5? I have had nothing but problems since this update. At first no photos were imported, then once I imported them (which took a couple of hours), many of them are duplicates that I now need to sort. But the worst part is that many of them are thumbnails that are too small so that when i try to drag a photo into iWeb everything is pixelated and looks horrible. I have spent hours reading this help site and tried BatChmod and iPhoto library manager and rebuilt the thumbnails but still have these problems. I don't understand why everything worked beautifully in v5 and this "update" is causing so many problems. I didn't really want to update iPhoto in the first place. I bought iLife so that I could use iWeb and the other apps automatically installed. This is extremely frustrating.
Sorry for the frustrated tone - I'm just at wits end dealing with this for the last few days...Hi,
Thanks for taking time with this. Yes, when I first installed I also updated to 6.04.
Below, my responses:
"Very strange. Upon the initial opening of iPhoto6 your library photos are reorganized into a new folder structure different than methods employed by earlier versions of iPhoto. Once completed iPhoto ought to open automatically revealing your Photo Library as it existed in iPhoto 5. Either:
- iPhoto 6 never processed your original library and instead simply created a new Photo Library (hence the blank library you saw - moving the Library to a location other than the Pictures folder, or naming the Library something other than iPhoto Library could be contributing causes),
- or the app didn't work properly, which I doubt."
*It seems that it must have created a new Photo Library. I didn't rename or move the file prior to the update as far as I know. It was in the Pictures file and appeared to be fine, but when I opened iPhoto, the library was blank and said No Photos.
"It sounds like the problem began with the initial reorganization. Do you remember getting a prompt from the app. asking you which library you wanted to reorganize? Do you have multiple libraries? Have you used iPhoto Library Manager?"
I don't remember getting a prompt asking which library, but it could have happened. No, I only had one photo library. I only used Library Manager after I encountered the problem of the empty library and turned to this forum for advice.
"Did you make this backup prior to the initial opening of iPhoto 6, or after the initial reorganization? If it's the former, you could trash the entire iPhoto Library folder in your existing Pictures folder, then move the backup library intact into the Picture folder. Then you would start-up iPhoto (hold down the option key so you are pointed to the correct library) and allow the app. to reorganize the Library into its new structure."
Well... no, I didn't have a current backup prior to the initial opening of iPhoto6. Completely my fault there.
"If the backup is after the reorganization, from what you describe, it seems your backed-up libraries may not have been reorganized. Advice is the same as in the previous paragraph."
I did that as well - launched hold option key, etc. Then I had photos after a few hours of rebuilding. That was good, but now I'm not sure what to do with all of the thumb sized duplicates. I think that all of the photos are there, just organized in a bit of a strange way - I usually had my library organized by roll according to date - and the rebuilding put things in strange orders and also merged some rolls, etc. For the most part though, each rebuilt roll is either fullsize or thumbsize, so that is a bit helpful. Since none of the previously sorted albums survived the update installation it's just very time consuming sorting through thousands of pics.
What I've done now is sorted rolls into fullsize and thumbsize, as a start to making sure that I have duplicates of all photos in both sizes before I do anything else. Once I have that job completely finished, what should I do with all of the thumbsize duplicates? Do I need the thumbs? Can I take them out of the viewing window of the application?
Of course I was planning on doing a backup the week that I got the new software but was too excited to install to remind myself to do the backup first... A good lesson to learn I suppose.
Thanks so much for your help. I look forward to seeing what to do once things are sorted again. -
IOS 4.0.X - Nothing but problems.
The iOS System has caused nothing but problems with my iPod Touch.
Here's the main problems I've noticed with iOS 4:
Applications crash randomly, even while idling.
WiFi signals are weaker.
WiFi stops working once in a while, even when I'm two feet from the router emitting the connection.
Applications run many times slower.
Begins freezing up for a couple seconds at a time after only 5 minutes of use.
Cannot play games that require speed and accuracy because of the freezing.
Cannot Sync with iTunes sometimes. Says it's an invalid device.
If there's any way I can get back to the 3.1.x software, please let me know. I'm tired of all the problems I'm getting and my iPod is almost useless to me. Even my music freezes once in a while.
I'm about ready to throw it away and just use my phone for my music. Please, Apple - Make it so we can go back to 3.1.2 and 3.1.3 if we want. Don't force us to use firmware our devices can't handle.
Also, before anyone makes a comment saying I shouldn't have updated if I didn't want it, I like most of the features of iOS 4, but my iPod can't handle it, and I don't want to buy a new one. I didn't know it would cause all of these problems.
Thanks ahead of time if anyone can provide me with a way to downgrade back to 3.1.3 or 3.1.2 firmware.
List of apps that crash randomly:
Tap Tap Revenge 3
The Impossible Test
Safari
App Store
iGun Pro
iTunes
Battle.net Mobile Authenticator
Name that song Lite
Music
Contacts
MailI've tried restoring to previous software but I always get the 3194 error after it tries to validate. All other ways I need to have jailbroken my iPod on an earlier firmware, which I've never jailbroken my iPod, ever.
-
Droid phones are nothing but problems
I have a Droid 2 and my Finace has a Droid 3. The phone that he has is about the 4th phone that Verizon has sent him. So far so good on the one he has now. My Droid 2 has been nothing but problems since the day I got it. It powers down by itself, sometimes in the middle of a phone conversation. I don't get most of my phone calls. People have to text me to ask me to call them. The majority of the time I have to resend my text messages because they won't go through the first time. And I keep having to clear the data on my text messaging or it freezes up while i'm trying to text someone. Now all of a sudden in the last couple of weeks my phone freezes up completely. I really don't know what to do with this 600.00 phone that I paid full price for and i've only had it a little over a year. I've never dropped it, nor gotten it wet or anything. Every Droid that we've had doesn't work very well at all
Where do I begin? I have a Droid X and I hear you. You haven't had the pleasure of receiving the same text (that a person sent you ONCE) over and again, sometimes for hours?
Or, people that can't hear you on their end when you call them?
Seriously, there are many "tips" some will offer, but no real answer.
First off, how many apps have you downloaded? Have you tried a factory software reset?
Do a Search for instructions if you haven't and/or don't know how and afterwards, do not install any apps the first day and see if that helps.
I have jumped through hoops troubleshooting my phone and have decided it is what it is until my upgrade date arrives.
Good luck and hang in there. -
1.13 has bought nothing but problems.
Slow screen response.
Slow apps.
Drops calls.
Drops half a call caller can't hear me.
visual mail unreliable.
O2 say take phone back to be fixed. Apple support also no help and won't let me go back to as purchased 1.12.
Apple not open about known bugs or problems.
The has become totally frustrating to us.
Should Apple replace instead of repair or are the problems more basic?It is advised that basic troubleshooting be done before any sort of Repair/Replacement of product.
The following troubleshooting steps may assist with this issue. If they do not then yes seek possible Repair/Replacement options that will be based on Apple's decision of which would work best for you.
1. Reboot iPhone - Hold down the Home & Lock button together. Do not let go till you see a silver apple logo. Once you do let go of these buttons. The iPhone OS will reboot just like a computer does.
Now test and see if your iPhone has the same issues.
2. Toggle Airplane Mode ON for 1 min then turn it OFF. Settings- Airplane Mode ON for 1 min... Now turn it off. See if same issues occur.
3. Reset Network Settings - ( Be Advised this does erase all WiFi passwords learned and possible VPN Settings. So VPN would need to be set back up and WiFi networks would need their password again so iPhone can learn.) Settings-General-Reset-Reset Network Settings-Confirm- iPhone will reboot. See if same issues occur.
4. Eject SIM card, And put SIM card back into iPhone, Please ensure iPhone is powered off before doing this.
Removing SIM card prior to iPhone repair
http://docs.info.apple.com/article.html?artnum=305746
5. Restore iPhone. Please ensure that you backup all content before you restore, As restore will erase all content off the iPhone. Contact your local iPhone Support for assistance if needed. Once you are ready connect iPhone to iTunes, In the summary screen Restore iPhone.
Now test iPhone see if the issues are the same.
If they are still the same you got a couple more options.
1. Possible bad SIM card. And if replaced could potentially resolve some of the issues.
2. Getting iPhone Repaired/ Replaced. Again can not say which will happen this is based on what the agent feels would be best and if it has to go into the Depot if they are able to fix it without replacing.
Maybe you are looking for
-
JSF error message: Automatic prompting for file download
This is a weird problem. I have a JSF application wherin I popup a new window on a submit button. The window opens a test.jsf page that redirects the output to a servlet1. Servlet then based on some parameters does a sendRedirectI() to different serv
-
html accompanies text, and is embedded in microsoft Word
-
Missing DLLs After Updating SB Live! Dri
A few days ago I updated my Creative SB Li've! driver to the latest available on the Creative site. Since then I've been getting messages about two missing DLLs: Ctkbres.DLL and CtSuRes.DLL. I really don't want to roll back my system, as I've done a
-
Having finally decided to try renting a movie with iTunes, I'm afraid the experience is not a good one. When attempting to play the movie, I get the following error message: "We could not complete your iTunes store request. An unknown error occurred
-
Satellite Pro A300D - Driver for Multimedia audio controller
Hi, I have Toshiba Satellite pro A300D and one day the built in mic, built in camera and the speakers stopped working. When i checked out Device manager i saw that the driver for the multimedia controller was not working so i uninstalled it and went