MSI K7T turbo2 MS-6330 bios ver 3.6..NEED SERIOUS HELP!!

Anybody plz help me.I own a mobo above running amd athlon xp 2000+. My system run well for one week. After dat, my system started to give me problem. It hangs one day and when i reboot my com, the message "Windows protection error. Please restart your computer" appears. I tried already many times to restarted my com..but still fails. So i think maybe RAM problem..so i try to remove and reinstall the RAM. Then my com succeed to boot into windows. Everything run ok..no problem for few days. Then suddenly my com hang again and I juz reboot my com. Then the same message appears again..May i know wat happened to my com.PLEASE HELP ME...:'(
My spec:
msi K7T turbo2 MS-6330 bios ver 3.6
AMD athlon xp 2000+
Asus v7100 Geforce 2 MX400
2x256 kingston ram(pc133)
2x20g maxtor hdd
1xTV tuner card
1XSb live soundcard

Try uninstalling the sound card and any other nonessential components. Also, when you uninstall click on the "show hidden" items and remove duplicates. Don't remove anything that you do not know exactly what it is including any marked "unknown" but if you see multiple sound cards or cd-roms, etc. remove them. Then see if you boot ok and gradually reinstall items.

Similar Messages

  • K7T Turbo2 MS-6330 Will not boot up

    Can someone help, I have a K7T Turbo2 MS-6330, and it will not boot up, I know I have power to my MB, becasue when I plug it in, the lights on my DIMM chips light up, and my fan spins for about 1/2 second.  I don't know what to check next.  Any assistance would be appreciated.
    THANKS...

    First of all, write what hardware other than mobo you have: cpu, power supply, graphics, memory, etc.
    also, read troubleshooting guide:
    http://www.msi.com.tw/program/service/forum/index.php?threadid=1131&boardid=13&styleid=1
    Take care

  • K7T Turbo2(MS-6330 V5) AGP Features FAQ

    Hi! I'm using K7T Turbo2(MS-6330 Ver5.0) motherboard and just bought an MSI Geforce4 MX440 64MB DDR (MS-8878 SE).
    When I run some benchmarking program (eg. 3D Mark 2001), the status of sideband addressing (SBA) and fastwrite (FW) of both the card and motherboard are shown as follow:
    Graphics Card:
    SBA: not supported
    FW: supported but not enabled
    Motherboard:
    SBA: supported but not enabled
    FW: not supported
    I tried very hard to force the SBA features using variety of software (Rivatuner, PowerStrip), but all failed.
    Experts here, do you think it is possible to force on either (or both) features? I heard that there are ways to force the features in low-level.
    Helps & Advices pls!
    TQ!

    Hi,
    From MSI,
    Enabling SBA & FW didnt really add much to the performance. There might be potential compatibility & stability issue when enabling SBA & FW. So we will not let be enabled
    After more clarification, this explanation is for both motherboard and display card of yours!

  • AthlonXP (2200+) + MSI K7T Turbo2 trouble

    Hi!, i have a huge problem that i can't solve!.  X(
    I have a MSI motherboard (MSI K7T Turbo2), and have bought myself a new CPU. After looking at the newest  BIOS details on the MSI website i desided to buy an AthlonXP 2200+ (1.8GHZ - becomed supported with the latest BIOS update) but now i can't get it to work propebly.
    I downloaded the latest BIOS and flashed it with the accurate flashtool that was included in the .exe file i d/l. and now to my problem:
    My AthlonXP 2200+ works with the standard clockfrequenzy settings in the BIOS configuration but that configuration tells the computer that i only have a AthlonXP 1500+ (1.3GHZ) not 2200+, so then i went to  the MSI website again and looked at the "CPU support" table you had. there is says:
    To get an AthlonXP 2200+ on a K7t Turbo2 motherboard to work, use these settings:
    set the FSB("clock by slightly adjust")=133 and the Ratio(CPU clock ratio)=13.5 and it will work, here's my problem, i can't set the FSB to "133" in my bios, the MAX setting is "132" and i can't choose "13.5" as ratio, only "13", so i tryed using FSB=132 and Ratio=13, but then after my computer rebooted i was forced to "clear the cmos" to get the computer to start again.
    so i must run the CPU as a 1500+ (1.35GHZ) using the standard settings in the frequenzy settings, and that realy sucks :(, the CPU cost me plenty of money and im a poor student with bad ecomomy and your BIOS details said that the CPU was supported ://// please help me!
    This is what my computer outputs directly when booting up: (when the BIOS checks harddrives/cdroms/memory...)
    * Award modular BIOS v6.00 PG
    * W6330VMS V.3.5
    pleease help me!!!!!  X(  X(  X(

    I think you have to remove the jumper "J17" for FSB 133+. Consult you'r manual on where this jumper is located.

  • CPU help MSI K7T Pro ms 6330

    will a  AMD MOBILE ATHLON 4 1.2GHZ 200FSB AHM1200AQQ3B work on this board msi k7t pro ms 6330 ver 2.1

    i dout it ,but to say no for sure you will have to try
    its certainley not one msi ever tested in it

  • [URGENT] MSI K7T Turbo2 patched 3.6 Problem

    SORRY TO POST IT AGAIN ON THIS FORUM.. ITS QUITE URGENT
    Hi! I've been using MSI K7T Turbo2 with my Athlon 1700 XP.
    So far no problem with the configuration.. And I did update the BIOS to v3.6
    However, when I sold the mobo to someone, who's using a Duron 700 processor, he told me that he couldn't get the system to boot. Not even see the startup BIOS screen.
    After that, he tried to clear the CMOS data by jumper and tried restarted, this time everything is fine. But later he found that, with this method, he CAN ONLY BOOT ONCE. Meaning if he saved anything in BIOS, it wont be saved actually. And also after he cleared the CMOS data and reinstalled Windows, when Windows restart the PC, the same old problem occurred (cannot start PC)
    As Duron is running at FSB 100MHz, he did set the jumper J17 closed (100MHz). But same problem happens. Then we suspect that it has something to do with the BIOS patch that I applied (v3.6). Could it be, after applying the bios patch (when I was using Athlon 1700 XP), the bios remembers that the processor is Athlon 1700 XP and does something (eg, removed the 100MHz feature?) that caused the motherboard now DOESN'T boot with Duron 700?
    Any suggestion?
    If so, where can we find the original bios for flashing back to previous version?
    TQ!

    what kind of system specs does the pc now have that he has it?  Is the heatsink mounted properly and is the fan plugged in?  I doubt the PSU should have any problem with that cpu.  How about the ram?  try swapping it out and replacing it.
    I would try removing everything that isn't essential to boot into Windows. Have only the cpu, ONE stick of ram, hard drive, cdrom drive, and graphics card.  Remove modems, NICs, Raid cards, extra ram sticks, extra IDE devices, disable the onboard sound (remember that there are two values to do this with in the BIOS and both must be disabled).  Try booting then.  Then check if you can boot normally.  If so, one of the pieces of hardware you removed is the problem.  If not, something is wrong physically or in the configuration of the remaining hardware.  Give that a go.  If things go okay, plug in one piece of hardware at a time and retry.  You'll hit a snag sooner or later.
    BTW, I don't think the board still thinks an athlon xp 1700+ is still in it.  In the Frequency and voltage controls, you might try setting the FSB, multiplier, and Vcore manually.

  • MSI K7T Turbo2 + AMD Athlon XP 2600+

    I have downloaded lastest BIOS for MSI K7T Turbo2 but i haven't able to run CPU at full speed (133x16=2128 MHz). And there's no multipler greater than 15 available...
    currenlty i'm using 145xdefault (12,5) = 1812,5 MHz... has anyone solved this problem? CPU = AMD Athlon XP 2600+ (333)

    Oh bugger!
    After posting this, I continued scanning and found the answer - and coming back here, I now understand BD51's answer.  Didn't sink in first time round!
    Anyway, I have apparently purchased the 333fsb version, blissfully unaware that was a 266 version, and that THAT is the one I SHOULD have bought.
    Ah well, that'll learn me to check the spec's more closely in future.
    Thanks for the reply, much appreciated.

  • MSI K7t Turbo2

    Hello. I Speak Spanish.  I can´t speak English. but...........
    Does MSI k7t Turbo2 Support any Linux Mandrake ?
    I want to install Mandrake 9.0. It doesn´t matter if is higher or lower.
    I only want to know if it is possible or not.
    Excuse me for my English.
    Thank you very much.  

    ..................................?????
    Please..my english is very bad.
    Help me pleaseeeeeeeeee...........

  • K7t trubo 2 6330 + geforce 2 mx 400...help

    Hi...plese help me
    My problems are:
    1)No video windows media player/or divx /no codes problem i update all but nothing(nimo or update windows media to 9 series with codes update) - only sound
    2)games dosen´t work - only audio - all screen black
    3)directx dosent run de direct draw and direct 3d test
    4) some times when i run the direct x test, my system chance screen resolution to something like 640*480, and 4 or 6 colors, in this case i try to run windows media player and try to see a video, and...ops...i see the video but only a 4 or 6 color, is terrible..
    my config is:
    MSI K7T TURBO2 VIA KT133A
    ATHLON XP +1800
    CHAITECH EXCEL VIDEO GEFORCE 2 MX 400 W/TV OUT
    2 X 256 MB RAM
    1 HD SEAGATE 20 GB
    1 HD SEAGATE 40 GB
    OS: windows xp pro
    NOTES: I UPDATE MY MOTHERBOARD BIOS TO 3.6
    I install win me, i dont have problems, the only is agp is run at 1x, i think is no a good performance
    I want run windows xp, but my problems are with video, i can see any video/divx, i have only sound, i try diferents drivers,directx, via 4-1, etc..
    my actually config:
    via 4-1 drivers 4.43
    Directx 9.0a
    nvidia 41.04 (i try with last drivers 43.45 and detonators but problem percist)
    every time that i install and test i format my HD and install all from zero.
    Note: when install win xp, during the process of instaltion the windows tell me that a problem with video and win xp repair, later the screen relosution chage a some big like 640*480, and 4 or 6 colors...later i reboot win xp start and install all drivers(via 4-1, nvidia, update directx, etc) and then i can view a 1024 with 32 bit but i can´t see any video or play any game.
    Please if some can help me....... ;(
    THX

    Thanks for your support, well i think and check the price for a Ati video card, but for this moment the geforce is the only...
    In my bios some settings are:
    *ADVANCED BIOS
    Apic mode          ENABLE
    Video Bios shadow       ENABLE
    *ADVANCED CHIPSET
    Video ram cacheable       ENABLE
    System Bios cacheable       ENABLE
    Fast R-W Turn Around       ENABLE
    AGP Aperture size       64M
    AGP-4x Mode ENABLE
    AGP Driving Control       AUTO
    AGP master 1 ws write       ENABLE
    AGP master 1 ws read       ENABLE
    *INTEGRATED PERIPHERIALS
    Init Display Firts AGP
    *PNP/PCI Configuration
    Resources Controlled by    AUTO(ESCD)
    PCI/VGA palette Snoop       DISABLE
    Assing IRQ for VGA       ENABLE
    Assing IRQ for USB E      NABLE
    in windows the IRQ are:
    u can see irq 10 is shared with video card and usb, i dont if this can make some conflict between this devices.
    thanks for your support

  • K7T Turbo2 MS-6330

    I can't run amd xp2100 at 133 MHz with motherboard K7T Turbo2, but it works (not well) at 100 MHZ and the bios tells me that i have a AMD xp1500. I have another computer with the same motherboard but with amd xp2000 and it works well at 133 MHz. So I'm very confused !!!! a new bios version maybe? to solve this?

    check cooler as this is most likley reason
    is psu in one that works a better one,swap them over
    use a lower vga card if a gf4 will help see if power is the issue
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=24%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6330%20Ver5.0
     bios needs to be 3.5 to be safe as thats when 2200 support added not clear were 2100 fits in

  • Just got my K7T Turbo2 from RMA. Ver 5 ??

    Topic says it ..
    How can I tell if the K7T Turbo2 I just got back from rma is a ver 5 ?? 2600xp t-bred (a) support would be great !
    T

    if its a turbo 2 its version 5
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=24&MODEL=MS-6330

  • K7T Turbo2 (MS-6330) Booting problems

     Last night, I installed an Athlon XP 1700+ on my K7T Turbo2 mobo. I can not boot into Windows now. Windows XP will hang on loading up mup.sys, and 98 resets at an indeterminate time. I cannot install Windows 98 or XP either, as both hang on the setup (Before I can even access recovery mode for XP). I've swapped out all my PCI devices, disabled nearly everything in the BIOS, etc... nothing good. Heres what I've got.
    Athlon XP 1700+
    K7T Turbo2 Mobo
    ATI Radeon 9000 128mb
    ATI Radeon 7200 32mb (Secondary Display)
    Creative Labs Soundblaster (Live!)
    1280 Megs of PC133 RAM (PNY)
    Linksys 10/100 PCI Ethernet Card
    Maxtor 60GB HD 7200
    Maxtor 12GB HD 7200
    Seagate 10GB HD 5400
    Buslink 52x24x52 CDRW
    Any help would be greatly appreciated! Do I need to set my FSB to 133 so I can use the 1700? I have updated my BIOS to the latest version. How would I increase the FSB?

    Welcome
    Shutdown and remove jumper J17 (see manual - jumper near ram slots). If no boot, clear CMOS and try again. Be sure to use Fail Safe Defaults for install.
    You've got a really heavy load, and hope your PSU is up to it. Do you have at least 200-220 combined watts on +3 and +5 circuits of PSU (see PSU label or maker's site).

  • K7T Pro (MS-6330) BIOS freezes

    Hello world!!!
    my old PC (MSI K7T, AMD 650 MHz, 640 MB RAM) has worked fine until 4 days ago.
    I switched off and from now I cannot switch on anymore.
    Th 4 LED's stay always red, that means either CPU problm (???) or lithium battery problem.
    I changed the battery (was almost discharged) but I cannot boot.
    Any idea, tips, hint??
    I have tried 3x to reset CMOS, still no success
    Thanks a lot!!!

    "How about this one, married to a Phenom X3 processor:
    http://www.msi.com/index.php?func=prodcpu2&prod_no=1612&maincat_no=1
    My guess it is about 100 $. A Phenom X3 about 150 $. And some memory too: Corsair TWIN2X PC6400 DDR2 2GB KIT CL4, 40 $ maybe."
    Except for the processor there are chances you wont need a new PSU for the above. Suspect however you are in the upgrading mood, which points towards a new hard disk and DVD-burner (to house the videos you make) so allow for a Zalman PSU in your budget, too.   
    And a little off: Thank you, Svet Bosskov-killer for the back-up and information!
    Mid a dodification: Was supposed to be a link in there, but got lost in translation. And misspelt last name.

  • MSI K7T Turbo2 WEIRD problem!

    Hi, I know this board is a bit old, but still ...
    I have a strange problem.
    When I power on my PC I can see the BIOS version and the processor type. The the boot screen stops. The machine then reboots and I get the same screen back on (seeing only the processor type).
    I tried reseting the bios, changing RAM banks. Same problem. I have 2 sticks od SDR RAM.
    The funny thing is, if I wait like 10 minutes the booting of windows begins. I then have to wait another 10 minutes and Windows XP are booted. Then everything works OK (HDD ok, dvdrw OK, sound ok, USB works, LPT1 works etc..).
    If I reboot the PC again, I have to wait another 20 minutes and - WIndows XP is booted.
    Whan could be wrong?
    Thanks.
    Sebastijan

    Hello!
    Please tell us PSU specs too, found on a sticker inside case, on the noisy box.
    It's not that old, I think, but have you ever updated BIOS.
    - Hey! Be careful you get the right BIOS!! I think this is for your board, but please check and double check, and read description for each update version.
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=24&kind=1
    Other than PSU and BIOS, it could also be IDE config is not as good as could be. If possible, have the hard disk(s) on different channel than CD, DVD etc. Master disks whether HDD or CDRW, should be at the end of the cable. What is the brand of your HDD?

  • Which bios ver do i need

    i have decided to flash my bios .. the thing is, i have a K8T Neo2 FIR motherboard and a athlon 64 3800+ venice core cpu
    at the moment i have ver 3.3 bios
    the ver 9.1 is for the k8t neo
    is this the one i need for the neo2 fir?

    Ty Tiresmoke
    I have read through the sticky .. seems a few people have had a little trouble with other issues since flashing to a new bios .. but if i don't get that duel channel i'll never sleep easy.
    i downloaded that version of clockgen and the agp lock does work. it was never a bios ver problem just a software one. the ver that ends in number 405 is the one to use.

Maybe you are looking for